Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Omap fixes for things that were discovered during the merge window:

- Few GPMC fixes and binding doc updates noted after sending
  pull requests for the GPMC branch.
- Board fixes for beagle usb host and rx51 spi probe order
- SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
  handling fixes

Then few minor things that are not strictly fixes but are good
to get out of the way:

- Add missing legacy mux registers for am/dm73x gpio
- Add detection for am33xx pg2.1 silicon
- Enable twl4030 audio modules in defconfig

* tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
  ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
  omap: mux: add AM/DM37x gpios
  ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
  ARM: OMAP2+: omap_device: use late_initcall_sync
  ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
  ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  ARM: OMAP2+: only WARN if a GPMC child probe function fail
  ARM: OMAP2+: only search for GPMC DT child nodes on probe
  Documentation: dt: update properties in TI GPMC NAND example
  Documentation: dt: update TI GPMC ethernet binding properties

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 42 insertions, 42 deletions

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index e7f8d7ed47e..6a983c1d87c 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -56,20 +56,20 @@ Example for an AM33xx board:
 			nand-bus-width = <16>;
 			ti,nand-ecc-opt = "bch8";
 
-			gpmc,sync-clk = <0>;
-			gpmc,cs-on = <0>;
-			gpmc,cs-rd-off = <44>;
-			gpmc,cs-wr-off = <44>;
-			gpmc,adv-on = <6>;
-			gpmc,adv-rd-off = <34>;
-			gpmc,adv-wr-off = <44>;
-			gpmc,we-off = <40>;
-			gpmc,oe-off = <54>;
-			gpmc,access = <64>;
-			gpmc,rd-cycle = <82>;
-			gpmc,wr-cycle = <82>;
-			gpmc,wr-access = <40>;
-			gpmc,wr-data-mux-bus = <0>;
+			gpmc,sync-clk-ps = <0>;
+			gpmc,cs-on-ns = <0>;
+			gpmc,cs-rd-off-ns = <44>;
+			gpmc,cs-wr-off-ns = <44>;
+			gpmc,adv-on-ns = <6>;
+			gpmc,adv-rd-off-ns = <34>;
+			gpmc,adv-wr-off-ns = <44>;
+			gpmc,we-off-ns = <40>;
+			gpmc,oe-off-ns = <54>;
+			gpmc,access-ns = <64>;
+			gpmc,rd-cycle-ns = <82>;
+			gpmc,wr-cycle-ns = <82>;
+			gpmc,wr-access-ns = <40>;
+			gpmc,wr-data-mux-bus-ns = <0>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
index 24cb4e46f67..ace4a64b369 100644
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
@@ -26,16 +26,16 @@ Required properties:
 - bank-width: 		Address width of the device in bytes. GPMC supports 8-bit
 			and 16-bit devices and so must be either 1 or 2 bytes.
 - compatible:		Compatible string property for the ethernet child device.
-- gpmc,cs-on:		Chip-select assertion time
-- gpmc,cs-rd-off:	Chip-select de-assertion time for reads
-- gpmc,cs-wr-off:	Chip-select de-assertion time for writes
-- gpmc,oe-on:		Output-enable assertion time
-- gpmc,oe-off		Output-enable de-assertion time
-- gpmc,we-on:		Write-enable assertion time
-- gpmc,we-off:		Write-enable de-assertion time
-- gpmc,access:		Start cycle to first data capture (read access)
-- gpmc,rd-cycle:	Total read cycle time
-- gpmc,wr-cycle:	Total write cycle time
+- gpmc,cs-on-ns:	Chip-select assertion time
+- gpmc,cs-rd-off-ns:	Chip-select de-assertion time for reads
+- gpmc,cs-wr-off-ns:	Chip-select de-assertion time for writes
+- gpmc,oe-on-ns:	Output-enable assertion time
+- gpmc,oe-off-ns:	Output-enable de-assertion time
+- gpmc,we-on-ns:	Write-enable assertion time
+- gpmc,we-off-ns:	Write-enable de-assertion time
+- gpmc,access-ns:	Start cycle to first data capture (read access)
+- gpmc,rd-cycle-ns:	Total read cycle time
+- gpmc,wr-cycle-ns:	Total write cycle time
 - reg:			Chip-select, base address (relative to chip-select)
 			and size of the memory mapped for the device.
 			Note that base address will be typically 0 as this
@@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 {
 		bank-width = <2>;
 
 		gpmc,mux-add-data;
-		gpmc,cs-on = <0>;
-		gpmc,cs-rd-off = <186>;
-		gpmc,cs-wr-off = <186>;
-		gpmc,adv-on = <12>;
-		gpmc,adv-rd-off = <48>;
-		gpmc,adv-wr-off = <48>;
-		gpmc,oe-on = <54>;
-		gpmc,oe-off = <168>;
-		gpmc,we-on = <54>;
-		gpmc,we-off = <168>;
-		gpmc,rd-cycle = <186>;
-		gpmc,wr-cycle = <186>;
-		gpmc,access = <114>;
-		gpmc,page-burst-access = <6>;
-		gpmc,bus-turnaround = <12>;
-		gpmc,cycle2cycle-delay = <18>;
-		gpmc,wr-data-mux-bus = <90>;
-		gpmc,wr-access = <186>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <186>;
+		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <114>;
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,bus-turnaround-ns = <12>;
+		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+		gpmc,wr-access-ns = <186>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;