Merge branch 'akpm' (patches from Andrew Morton)

Merge first patch-bomb from Andrew Morton:
 "Quite a lot of other stuff is banked up awaiting further
  next->mainline merging, but this batch contains:

   - Lots of random misc patches
   - OCFS2
   - Most of MM
   - backlight updates
   - lib/ updates
   - printk updates
   - checkpatch updates
   - epoll tweaking
   - rtc updates
   - hfs
   - hfsplus
   - documentation
   - procfs
   - update gcov to gcc-4.7 format
   - IPC"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
  ipc, msg: fix message length check for negative values
  ipc/util.c: remove unnecessary work pending test
  devpts: plug the memory leak in kill_sb
  ./Makefile: export initial ramdisk compression config option
  init/Kconfig: add option to disable kernel compression
  drivers: w1: make w1_slave::flags long to avoid memory corruption
  drivers/w1/masters/ds1wm.cuse dev_get_platdata()
  drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
  drivers/memstick/core/mspro_block.c: fix attributes array allocation
  drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
  kernel/panic.c: reduce 1 byte usage for print tainted buffer
  gcov: reuse kbasename helper
  kernel/gcov/fs.c: use pr_warn()
  kernel/module.c: use pr_foo()
  gcov: compile specific gcov implementation based on gcc version
  gcov: add support for gcc 4.7 gcov format
  gcov: move gcov structs definitions to a gcc version specific file
  kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
  kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
  kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
  ...

13 files changed, 101 insertions, 24 deletions

diff --git a/Documentation/ABI/README b/Documentation/ABI/README
index 10069828568..1fafc4b0753 100644
--- a/Documentation/ABI/README
+++ b/Documentation/ABI/README
@@ -72,3 +72,16 @@ kernel tree without going through the obsolete state first.
 
 It's up to the developer to place their interfaces in the category they
 wish for it to start out in.
+
+
+Notable bits of non-ABI, which should not under any circumstances be considered
+stable:
+
+- Kconfig.  Userspace should not rely on the presence or absence of any
+  particular Kconfig symbol, in /proc/config.gz, in the copy of .config
+  commonly installed to /boot, or in any invocation of the kernel build
+  process.
+
+- Kernel-internal symbols.  Do not rely on the presence, absence, location, or
+  type of any kernel symbol, either in System.map files or the kernel binary
+  itself.  See Documentation/stable_api_nonsense.txt.
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
index 1c732f0c675..01bce243d3d 100644
--- a/Documentation/backlight/lp855x-driver.txt
+++ b/Documentation/backlight/lp855x-driver.txt
@@ -4,7 +4,8 @@ Kernel driver lp855x
 Backlight driver for LP855x ICs
 
 Supported chips:
-	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
+	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
+	LP8557
 
 Author: Milo(Woogyom) Kim <milo.kim@ti.com>
 
@@ -24,7 +25,7 @@ Value : pwm based or register based
 
 2) chip_id
 The lp855x chip id.
-Value : lp8550/lp8551/lp8552/lp8553/lp8556/lp8557
+Value : lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
 
 Platform data for lp855x
 ------------------------
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 8af4ad12182..e2bc132608f 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -573,15 +573,19 @@ an memcg since the pages are allowed to be allocated from any physical
 node.  One of the use cases is evaluating application performance by
 combining this information with the application's CPU allocation.
 
-We export "total", "file", "anon" and "unevictable" pages per-node for
-each memcg.  The ouput format of memory.numa_stat is:
+Each memcg's numa_stat file includes "total", "file", "anon" and "unevictable"
+per-node page counts including "hierarchical_<counter>" which sums up all
+hierarchical children's values in addition to the memcg's own value.
+
+The ouput format of memory.numa_stat is:
 
 total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
 file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
 anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
 unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+hierarchical_<counter>=<counter pages> N0=<node 0 pages> N1=<node 1 pages> ...
 
-And we have total = file + anon + unevictable.
+The "total" count is sum of file + anon + unevictable.
 
 6. Hierarchy support
 
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index 786dc82f98c..8cb9938cc47 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -5,7 +5,7 @@
 			Rusty Russell <rusty@rustcorp.com.au>
 			Srivatsa Vaddagiri <vatsa@in.ibm.com>
 		i386:
-			Zwane Mwaikambo <zwane@arm.linux.org.uk>
+			Zwane Mwaikambo <zwanem@gmail.com>
 		ppc64:
 			Nathan Lynch <nathanl@austin.ibm.com>
 			Joel Schopp <jschopp@austin.ibm.com>
diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
index 1482103d288..96e83a56048 100644
--- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
+++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
@@ -2,7 +2,7 @@ lp855x bindings
 
 Required properties:
   - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
-                "ti,lp8556", "ti,lp8557"
+                "ti,lp8555", "ti,lp8556", "ti,lp8557"
   - reg: I2C slave address (u8)
   - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
 
@@ -15,6 +15,33 @@ Optional properties:
 
 Example:
 
+	/* LP8555 */
+	backlight@2c {
+		compatible = "ti,lp8555";
+		reg = <0x2c>;
+
+		dev-ctrl = /bits/ 8 <0x00>;
+		pwm-period = <10000>;
+
+		/* 4V OV, 4 output LED0 string enabled */
+		rom_14h {
+			rom-addr = /bits/ 8 <0x14>;
+			rom-val = /bits/ 8 <0xcf>;
+		};
+
+		/* Heavy smoothing, 24ms ramp time step */
+		rom_15h {
+			rom-addr = /bits/ 8 <0x15>;
+			rom-val = /bits/ 8 <0xc7>;
+		};
+
+		/* 4 output LED1 string enabled */
+		rom_19h {
+			rom-addr = /bits/ 8 <0x19>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+	};
+
 	/* LP8556 */
 	backlight@2c {
 		compatible = "ti,lp8556";
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 823c95faebd..22d89aa3721 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -460,6 +460,7 @@ manner. The codes are the following:
     nl  - non-linear mapping
     ar  - architecture specific flag
     dd  - do not include area into core dump
+    sd  - soft-dirty flag
     mm  - mixed map area
     hg  - huge page advise flag
     nh  - no-huge page advise flag
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index aa1f459fa6c..4a93e98b290 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -307,7 +307,7 @@ the following:
 
                 <proceeding files...>
                 <slot #3, id = 0x43, characters = "h is long">
-                <slot #2, id = 0x02, characters = "xtension which">
+                <slot #2, id = 0x02, characters = "xtension whic">
                 <slot #1, id = 0x01, characters = "My Big File.E">
                 <directory entry, name = "MYBIGFIL.EXT">
 
diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt
index e7ca6478cd9..7b727783db7 100644
--- a/Documentation/gcov.txt
+++ b/Documentation/gcov.txt
@@ -50,6 +50,10 @@ Configure the kernel with:
         CONFIG_DEBUG_FS=y
         CONFIG_GCOV_KERNEL=y
 
+select the gcc's gcov format, default is autodetect based on gcc version:
+
+        CONFIG_GCOV_FORMAT_AUTODETECT=y
+
 and to get coverage data for the entire kernel:
 
         CONFIG_GCOV_PROFILE_ALL=y
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index fd3ecedc084..9ca3e74a10e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1070,6 +1070,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				VIA, nVidia)
 			verbose: show contents of HPET registers during setup
 
+	hpet_mmap=	[X86, HPET_MMAP] Allow userspace to mmap HPET
+			registers.  Default set by CONFIG_HPET_MMAP_DEFAULT.
+
 	hugepages=	[HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
 	hugepagesz=	[HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
 			On x86-64 and powerpc, this option can be specified
@@ -1775,6 +1778,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			that the amount of memory usable for all allocations
 			is not too small.
 
+	movable_node	[KNL,X86] Boot-time switch to enable the effects
+			of CONFIG_MOVABLE_NODE=y. See mm/Kconfig for details.
+
 	MTD_Partition=	[MTD]
 			Format: <name>,<region-number>,<size>,<offset>
 
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 4273b2d71a2..26b7ee491df 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -290,13 +290,24 @@ Default value is "/sbin/hotplug".
 kptr_restrict:
 
 This toggle indicates whether restrictions are placed on
-exposing kernel addresses via /proc and other interfaces.  When
-kptr_restrict is set to (0), there are no restrictions.  When
-kptr_restrict is set to (1), the default, kernel pointers
-printed using the %pK format specifier will be replaced with 0's
-unless the user has CAP_SYSLOG.  When kptr_restrict is set to
-(2), kernel pointers printed using %pK will be replaced with 0's
-regardless of privileges.
+exposing kernel addresses via /proc and other interfaces.
+
+When kptr_restrict is set to (0), the default, there are no restrictions.
+
+When kptr_restrict is set to (1), kernel pointers printed using the %pK
+format specifier will be replaced with 0's unless the user has CAP_SYSLOG
+and effective user and group ids are equal to the real ids. This is
+because %pK checks are done at read() time rather than open() time, so
+if permissions are elevated between the open() and the read() (e.g via
+a setuid binary) then %pK will not leak kernel pointers to unprivileged
+users. Note, this is a temporary solution only. The correct long-term
+solution is to do the permission checks at open() time. Consider removing
+world read permissions from files that use %pK, and using dmesg_restrict
+to protect against uses of %pK in dmesg(8) if leaking kernel pointer
+values to unprivileged users is a concern.
+
+When kptr_restrict is set to (2), kernel pointers printed using
+%pK will be replaced with 0's regardless of privileges.
 
 ==============================================================
 
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 79a797eb3e8..1fbd4eb7b64 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -119,8 +119,11 @@ other appears as 0 when read.
 
 dirty_background_ratio
 
-Contains, as a percentage of total system memory, the number of pages at which
-the background kernel flusher threads will start writing out dirty data.
+Contains, as a percentage of total available memory that contains free pages
+and reclaimable pages, the number of pages at which the background kernel
+flusher threads will start writing out dirty data.
+
+The total avaiable memory is not equal to total system memory.
 
 ==============================================================
 
@@ -151,9 +154,11 @@ interval will be written out next time a flusher thread wakes up.
 
 dirty_ratio
 
-Contains, as a percentage of total system memory, the number of pages at which
-a process which is generating disk writes will itself start writing out dirty
-data.
+Contains, as a percentage of total available memory that contains free pages
+and reclaimable pages, the number of pages at which a process which is
+generating disk writes will itself start writing out dirty data.
+
+The total avaiable memory is not equal to total system memory.
 
 ==============================================================
 
diff --git a/Documentation/trace/tracepoints.txt b/Documentation/trace/tracepoints.txt
index ac4170dd0f2..6b018b53177 100644
--- a/Documentation/trace/tracepoints.txt
+++ b/Documentation/trace/tracepoints.txt
@@ -114,3 +114,8 @@ core kernel image or in modules.
 If the tracepoint has to be used in kernel modules, an
 EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be
 used to export the defined tracepoints.
+
+Note: The convenience macro TRACE_EVENT provides an alternative way to
+      define tracepoints. Check http://lwn.net/Articles/379903,
+      http://lwn.net/Articles/381064 and http://lwn.net/Articles/383362
+      for a series of articles with more details.
diff --git a/Documentation/vm/zswap.txt b/Documentation/vm/zswap.txt
index 7e492d8aaea..00c3d31e797 100644
--- a/Documentation/vm/zswap.txt
+++ b/Documentation/vm/zswap.txt
@@ -8,7 +8,7 @@ significant performance improvement if reads from the compressed cache are
 faster than reads from a swap device.
 
 NOTE: Zswap is a new feature as of v3.11 and interacts heavily with memory
-reclaim.  This interaction has not be fully explored on the large set of
+reclaim.  This interaction has not been fully explored on the large set of
 potential configurations and workloads that exist.  For this reason, zswap
 is a work in progress and should be considered experimental.
 
@@ -23,7 +23,7 @@ Some potential benefits:
     drastically reducing life-shortening writes.
 
 Zswap evicts pages from compressed cache on an LRU basis to the backing swap
-device when the compressed pool reaches it size limit.  This requirement had
+device when the compressed pool reaches its size limit.  This requirement had
 been identified in prior community discussions.
 
 To enabled zswap, the "enabled" attribute must be set to 1 at boot time.  e.g.
@@ -37,7 +37,7 @@ the backing swap device in the case that the compressed pool is full.
 
 Zswap makes use of zbud for the managing the compressed memory pool.  Each
 allocation in zbud is not directly accessible by address.  Rather, a handle is
-return by the allocation routine and that handle must be mapped before being
+returned by the allocation routine and that handle must be mapped before being
 accessed.  The compressed memory pool grows on demand and shrinks as compressed
 pages are freed.  The pool is not preallocated.
 
@@ -56,7 +56,7 @@ in the swap_map goes to 0) the swap code calls the zswap invalidate function,
 via frontswap, to free the compressed entry.
 
 Zswap seeks to be simple in its policies.  Sysfs attributes allow for one user
-controlled policies:
+controlled policy:
 * max_pool_percent - The maximum percentage of memory that the compressed
     pool can occupy.