Merge branch 'v3.2-rc7' into next/pm

Conflicts:
	arch/arm/kernel/setup.c
	arch/arm/mach-shmobile/board-kota2.c

5 files changed, 12 insertions, 21 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
index fa72ccb2282..dbedafb095e 100644
--- a/Documentation/ABI/testing/sysfs-bus-rbd
+++ b/Documentation/ABI/testing/sysfs-bus-rbd
@@ -57,13 +57,6 @@ create_snap
 
 	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
 
-rollback_snap
-
-	Rolls back data to the specified snapshot. This goes over the entire
-	list of rados blocks and sends a rollback command to each.
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
-
 snap_*
 
 	A directory per each snapshot
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a0c5c5f4fce..81c287fad79 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -315,12 +315,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			CPU-intensive style benchmark, and it can vary highly in
 			a microbenchmark depending on workload and compiler.
 
-			1: only for 32-bit processes
-			2: only for 64-bit processes
+			32: only for 32-bit processes
+			64: only for 64-bit processes
 			on: enable for both 32- and 64-bit processes
 			off: disable for both 32- and 64-bit processes
 
-	amd_iommu=	[HW,X86-84]
+	amd_iommu=	[HW,X86-64]
 			Pass parameters to the AMD IOMMU driver in the system.
 			Possible values are:
 			fullflush - enable flushing of IO/TLB entries when
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index f049a1ca186..589f2da5d54 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -282,11 +282,11 @@ tcp_max_ssthresh - INTEGER
 	Default: 0 (off)
 
 tcp_max_syn_backlog - INTEGER
-	Maximal number of remembered connection requests, which are
-	still did not receive an acknowledgment from connecting client.
-	Default value is 1024 for systems with more than 128Mb of memory,
-	and 128 for low memory machines. If server suffers of overload,
-	try to increase this number.
+	Maximal number of remembered connection requests, which have not
+	received an acknowledgment from connecting client.
+	The minimal value is 128 for low memory machines, and it will
+	increase in proportion to the memory of machine.
+	If server suffers from overload, try increasing this number.
 
 tcp_max_tw_buckets - INTEGER
 	Maximal number of timewait sockets held by system simultaneously.
diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt
index 3e2ec9cbf39..d50c14df341 100644
--- a/Documentation/sound/alsa/soc/machine.txt
+++ b/Documentation/sound/alsa/soc/machine.txt
@@ -50,8 +50,7 @@ Machine DAI Configuration
 The machine DAI configuration glues all the codec and CPU DAIs together. It can
 also be used to set up the DAI system clock and for any machine related DAI
 initialisation e.g. the machine audio map can be connected to the codec audio
-map, unconnected codec pins can be set as such. Please see corgi.c, spitz.c
-for examples.
+map, unconnected codec pins can be set as such.
 
 struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
 
@@ -83,8 +82,7 @@ Machine Power Map
 The machine driver can optionally extend the codec power map and to become an
 audio power map of the audio subsystem. This allows for automatic power up/down
 of speaker/HP amplifiers, etc. Codec pins can be connected to the machines jack
-sockets in the machine init function. See soc/pxa/spitz.c and dapm.txt for
-details.
+sockets in the machine init function.
 
 
 Machine Controls
diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf
index 37a02ce5484..f0ffc27d4c0 100644
--- a/Documentation/usb/linux-cdc-acm.inf
+++ b/Documentation/usb/linux-cdc-acm.inf
@@ -90,10 +90,10 @@ ServiceBinary=%12%\USBSER.sys
 [SourceDisksFiles]
 [SourceDisksNames]
 [DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
 
 [DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
 
 
 ;------------------------------------------------------------------------------