Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD KFD driver merge

     This is the AMD HSA interface for exposing a lowlevel interface for
     GPGPU use.  They have an open source userspace built on top of this
     interface, and the code looks as good as it was going to get out of
     tree.

   - Initial atomic modesetting work

     The need for an atomic modesetting interface to allow userspace to
     try and send a complete set of modesetting state to the driver has
     arisen, and been suffering from neglect this past year.  No more,
     the start of the common code and changes for msm driver to use it
     are in this tree.  Ongoing work to get the userspace ioctl finished
     and the code clean will probably wait until next kernel.

   - DisplayID 1.3 and tiled monitor exposed to userspace.

     Tiled monitor property is now exposed for userspace to make use of.

   - Rockchip drm driver merged.

   - imx gpu driver moved out of staging

  Other stuff:

   - core:
        panel - MIPI DSI + new panels.
        expose suggested x/y properties for virtual GPUs

   - i915:
        Initial Skylake (SKL) support
        gen3/4 reset work
        start of dri1/ums removal
        infoframe tracking
        fixes for lots of things.

   - nouveau:
        tegra k1 voltage support
        GM204 modesetting support
        GT21x memory reclocking work

   - radeon:
        CI dpm fixes
        GPUVM improvements
        Initial DPM fan control

   - rcar-du:
        HDMI support added
        removed some support for old boards
        slave encoder driver for Analog Devices adv7511

   - exynos:
        Exynos4415 SoC support

   - msm:
        a4xx gpu support
        atomic helper conversion

   - tegra:
        iommu support
        universal plane support
        ganged-mode DSI support

   - sti:
        HDMI i2c improvements

   - vmwgfx:
        some late fixes.

   - qxl:
        use suggested x/y properties"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
  drm: sti: fix module compilation issue
  drm/i915: save/restore GMBUS freq across suspend/resume on gen4
  drm: sti: correctly cleanup CRTC and planes
  drm: sti: add HQVDP plane
  drm: sti: add cursor plane
  drm: sti: enable auxiliary CRTC
  drm: sti: fix delay in VTG programming
  drm: sti: prepare sti_tvout to support auxiliary crtc
  drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
  drm: sti: fix hdmi avi infoframe
  drm: sti: remove event lock while disabling vblank
  drm: sti: simplify gdp code
  drm: sti: clear all mixer control
  drm: sti: remove gpio for HDMI hot plug detection
  drm: sti: allow to change hdmi ddc i2c adapter
  drm/doc: Document drm_add_modes_noedid() usage
  drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
  drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
  drm: Zero out DRM object memory upon cleanup
  drm/i915/bdw: Fix the write setting up the WIZ hashing mode
  ...

17 files changed, 567 insertions, 144 deletions

diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index be35bc328b7..4b592ffbafe 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -492,10 +492,10 @@ char *date;</synopsis>
     <sect2>
       <title>The Translation Table Manager (TTM)</title>
       <para>
-	TTM design background and information belongs here.
+        TTM design background and information belongs here.
       </para>
       <sect3>
-	<title>TTM initialization</title>
+        <title>TTM initialization</title>
         <warning><para>This section is outdated.</para></warning>
         <para>
           Drivers wishing to support TTM must fill out a drm_bo_driver
@@ -503,42 +503,42 @@ char *date;</synopsis>
           pointers for initializing the TTM, allocating and freeing memory,
           waiting for command completion and fence synchronization, and memory
           migration. See the radeon_ttm.c file for an example of usage.
-	</para>
-	<para>
-	  The ttm_global_reference structure is made up of several fields:
-	</para>
-	<programlisting>
-	  struct ttm_global_reference {
-	  	enum ttm_global_types global_type;
-	  	size_t size;
-	  	void *object;
-	  	int (*init) (struct ttm_global_reference *);
-	  	void (*release) (struct ttm_global_reference *);
-	  };
-	</programlisting>
-	<para>
-	  There should be one global reference structure for your memory
-	  manager as a whole, and there will be others for each object
-	  created by the memory manager at runtime.  Your global TTM should
-	  have a type of TTM_GLOBAL_TTM_MEM.  The size field for the global
-	  object should be sizeof(struct ttm_mem_global), and the init and
-	  release hooks should point at your driver-specific init and
-	  release routines, which probably eventually call
-	  ttm_mem_global_init and ttm_mem_global_release, respectively.
-	</para>
-	<para>
-	  Once your global TTM accounting structure is set up and initialized
-	  by calling ttm_global_item_ref() on it,
-	  you need to create a buffer object TTM to
-	  provide a pool for buffer object allocation by clients and the
-	  kernel itself.  The type of this object should be TTM_GLOBAL_TTM_BO,
-	  and its size should be sizeof(struct ttm_bo_global).  Again,
-	  driver-specific init and release functions may be provided,
-	  likely eventually calling ttm_bo_global_init() and
-	  ttm_bo_global_release(), respectively.  Also, like the previous
-	  object, ttm_global_item_ref() is used to create an initial reference
-	  count for the TTM, which will call your initialization function.
-	</para>
+        </para>
+        <para>
+          The ttm_global_reference structure is made up of several fields:
+        </para>
+        <programlisting>
+          struct ttm_global_reference {
+                  enum ttm_global_types global_type;
+                  size_t size;
+                  void *object;
+                  int (*init) (struct ttm_global_reference *);
+                  void (*release) (struct ttm_global_reference *);
+          };
+        </programlisting>
+        <para>
+          There should be one global reference structure for your memory
+          manager as a whole, and there will be others for each object
+          created by the memory manager at runtime.  Your global TTM should
+          have a type of TTM_GLOBAL_TTM_MEM.  The size field for the global
+          object should be sizeof(struct ttm_mem_global), and the init and
+          release hooks should point at your driver-specific init and
+          release routines, which probably eventually call
+          ttm_mem_global_init and ttm_mem_global_release, respectively.
+        </para>
+        <para>
+          Once your global TTM accounting structure is set up and initialized
+          by calling ttm_global_item_ref() on it,
+          you need to create a buffer object TTM to
+          provide a pool for buffer object allocation by clients and the
+          kernel itself.  The type of this object should be TTM_GLOBAL_TTM_BO,
+          and its size should be sizeof(struct ttm_bo_global).  Again,
+          driver-specific init and release functions may be provided,
+          likely eventually calling ttm_bo_global_init() and
+          ttm_bo_global_release(), respectively.  Also, like the previous
+          object, ttm_global_item_ref() is used to create an initial reference
+          count for the TTM, which will call your initialization function.
+        </para>
       </sect3>
     </sect2>
     <sect2 id="drm-gem">
@@ -566,19 +566,19 @@ char *date;</synopsis>
         using driver-specific ioctls.
       </para>
       <para>
-	On a fundamental level, GEM involves several operations:
-	<itemizedlist>
-	  <listitem>Memory allocation and freeing</listitem>
-	  <listitem>Command execution</listitem>
-	  <listitem>Aperture management at command execution time</listitem>
-	</itemizedlist>
-	Buffer object allocation is relatively straightforward and largely
+        On a fundamental level, GEM involves several operations:
+        <itemizedlist>
+          <listitem>Memory allocation and freeing</listitem>
+          <listitem>Command execution</listitem>
+          <listitem>Aperture management at command execution time</listitem>
+        </itemizedlist>
+        Buffer object allocation is relatively straightforward and largely
         provided by Linux's shmem layer, which provides memory to back each
         object.
       </para>
       <para>
         Device-specific operations, such as command execution, pinning, buffer
-	read &amp; write, mapping, and domain ownership transfers are left to
+        read &amp; write, mapping, and domain ownership transfers are left to
         driver-specific ioctls.
       </para>
       <sect3>
@@ -738,16 +738,16 @@ char *date;</synopsis>
           respectively. The conversion is handled by the DRM core without any
           driver-specific support.
         </para>
-	<para>
-	  GEM also supports buffer sharing with dma-buf file descriptors through
-	  PRIME. GEM-based drivers must use the provided helpers functions to
-	  implement the exporting and importing correctly. See <xref linkend="drm-prime-support" />.
-	  Since sharing file descriptors is inherently more secure than the
-	  easily guessable and global GEM names it is the preferred buffer
-	  sharing mechanism. Sharing buffers through GEM names is only supported
-	  for legacy userspace. Furthermore PRIME also allows cross-device
-	  buffer sharing since it is based on dma-bufs.
-	</para>
+        <para>
+          GEM also supports buffer sharing with dma-buf file descriptors through
+          PRIME. GEM-based drivers must use the provided helpers functions to
+          implement the exporting and importing correctly. See <xref linkend="drm-prime-support" />.
+          Since sharing file descriptors is inherently more secure than the
+          easily guessable and global GEM names it is the preferred buffer
+          sharing mechanism. Sharing buffers through GEM names is only supported
+          for legacy userspace. Furthermore PRIME also allows cross-device
+          buffer sharing since it is based on dma-bufs.
+        </para>
       </sect3>
       <sect3 id="drm-gem-objects-mapping">
         <title>GEM Objects Mapping</title>
@@ -852,7 +852,7 @@ char *date;</synopsis>
       <sect3>
         <title>Command Execution</title>
         <para>
-	  Perhaps the most important GEM function for GPU devices is providing a
+          Perhaps the most important GEM function for GPU devices is providing a
           command execution interface to clients. Client programs construct
           command buffers containing references to previously allocated memory
           objects, and then submit them to GEM. At that point, GEM takes care to
@@ -874,95 +874,101 @@ char *date;</synopsis>
         <title>GEM Function Reference</title>
 !Edrivers/gpu/drm/drm_gem.c
       </sect3>
-      </sect2>
-      <sect2>
-	<title>VMA Offset Manager</title>
+    </sect2>
+    <sect2>
+      <title>VMA Offset Manager</title>
 !Pdrivers/gpu/drm/drm_vma_manager.c vma offset manager
 !Edrivers/gpu/drm/drm_vma_manager.c
 !Iinclude/drm/drm_vma_manager.h
-      </sect2>
-      <sect2 id="drm-prime-support">
-	<title>PRIME Buffer Sharing</title>
-	<para>
-	  PRIME is the cross device buffer sharing framework in drm, originally
-	  created for the OPTIMUS range of multi-gpu platforms. To userspace
-	  PRIME buffers are dma-buf based file descriptors.
-	</para>
-	<sect3>
-	  <title>Overview and Driver Interface</title>
-	  <para>
-	    Similar to GEM global names, PRIME file descriptors are
-	    also used to share buffer objects across processes. They offer
-	    additional security: as file descriptors must be explicitly sent over
-	    UNIX domain sockets to be shared between applications, they can't be
-	    guessed like the globally unique GEM names.
-	  </para>
-	  <para>
-	    Drivers that support the PRIME
-	    API must set the DRIVER_PRIME bit in the struct
-	    <structname>drm_driver</structname>
-	    <structfield>driver_features</structfield> field, and implement the
-	    <methodname>prime_handle_to_fd</methodname> and
-	    <methodname>prime_fd_to_handle</methodname> operations.
-	  </para>
-	  <para>
-	    <synopsis>int (*prime_handle_to_fd)(struct drm_device *dev,
-			  struct drm_file *file_priv, uint32_t handle,
-			  uint32_t flags, int *prime_fd);
+    </sect2>
+    <sect2 id="drm-prime-support">
+      <title>PRIME Buffer Sharing</title>
+      <para>
+        PRIME is the cross device buffer sharing framework in drm, originally
+        created for the OPTIMUS range of multi-gpu platforms. To userspace
+        PRIME buffers are dma-buf based file descriptors.
+      </para>
+      <sect3>
+        <title>Overview and Driver Interface</title>
+        <para>
+          Similar to GEM global names, PRIME file descriptors are
+          also used to share buffer objects across processes. They offer
+          additional security: as file descriptors must be explicitly sent over
+          UNIX domain sockets to be shared between applications, they can't be
+          guessed like the globally unique GEM names.
+        </para>
+        <para>
+          Drivers that support the PRIME
+          API must set the DRIVER_PRIME bit in the struct
+          <structname>drm_driver</structname>
+          <structfield>driver_features</structfield> field, and implement the
+          <methodname>prime_handle_to_fd</methodname> and
+          <methodname>prime_fd_to_handle</methodname> operations.
+        </para>
+        <para>
+          <synopsis>int (*prime_handle_to_fd)(struct drm_device *dev,
+                          struct drm_file *file_priv, uint32_t handle,
+                          uint32_t flags, int *prime_fd);
 int (*prime_fd_to_handle)(struct drm_device *dev,
-			  struct drm_file *file_priv, int prime_fd,
-			  uint32_t *handle);</synopsis>
-	    Those two operations convert a handle to a PRIME file descriptor and
-	    vice versa. Drivers must use the kernel dma-buf buffer sharing framework
-	    to manage the PRIME file descriptors. Similar to the mode setting
-	    API PRIME is agnostic to the underlying buffer object manager, as
-	    long as handles are 32bit unsigned integers.
-	  </para>
-	  <para>
-	    While non-GEM drivers must implement the operations themselves, GEM
-	    drivers must use the <function>drm_gem_prime_handle_to_fd</function>
-	    and <function>drm_gem_prime_fd_to_handle</function> helper functions.
-	    Those helpers rely on the driver
-	    <methodname>gem_prime_export</methodname> and
-	    <methodname>gem_prime_import</methodname> operations to create a dma-buf
-	    instance from a GEM object (dma-buf exporter role) and to create a GEM
-	    object from a dma-buf instance (dma-buf importer role).
-	  </para>
-	  <para>
-	    <synopsis>struct dma_buf * (*gem_prime_export)(struct drm_device *dev,
-				     struct drm_gem_object *obj,
-				     int flags);
+                          struct drm_file *file_priv, int prime_fd,
+                          uint32_t *handle);</synopsis>
+            Those two operations convert a handle to a PRIME file descriptor and
+            vice versa. Drivers must use the kernel dma-buf buffer sharing framework
+            to manage the PRIME file descriptors. Similar to the mode setting
+            API PRIME is agnostic to the underlying buffer object manager, as
+            long as handles are 32bit unsigned integers.
+          </para>
+          <para>
+            While non-GEM drivers must implement the operations themselves, GEM
+            drivers must use the <function>drm_gem_prime_handle_to_fd</function>
+            and <function>drm_gem_prime_fd_to_handle</function> helper functions.
+            Those helpers rely on the driver
+            <methodname>gem_prime_export</methodname> and
+            <methodname>gem_prime_import</methodname> operations to create a dma-buf
+            instance from a GEM object (dma-buf exporter role) and to create a GEM
+            object from a dma-buf instance (dma-buf importer role).
+          </para>
+          <para>
+            <synopsis>struct dma_buf * (*gem_prime_export)(struct drm_device *dev,
+                             struct drm_gem_object *obj,
+                             int flags);
 struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev,
-					    struct dma_buf *dma_buf);</synopsis>
-	    These two operations are mandatory for GEM drivers that support
-	    PRIME.
-	  </para>
-	</sect3>
-        <sect3>
-          <title>PRIME Helper Functions</title>
-!Pdrivers/gpu/drm/drm_prime.c PRIME Helpers
+                                            struct dma_buf *dma_buf);</synopsis>
+            These two operations are mandatory for GEM drivers that support
+            PRIME.
+          </para>
         </sect3>
-      </sect2>
-      <sect2>
-	<title>PRIME Function References</title>
+      <sect3>
+        <title>PRIME Helper Functions</title>
+!Pdrivers/gpu/drm/drm_prime.c PRIME Helpers
+      </sect3>
+    </sect2>
+    <sect2>
+      <title>PRIME Function References</title>
 !Edrivers/gpu/drm/drm_prime.c
-      </sect2>
-      <sect2>
-	<title>DRM MM Range Allocator</title>
-	<sect3>
-	  <title>Overview</title>
+    </sect2>
+    <sect2>
+      <title>DRM MM Range Allocator</title>
+      <sect3>
+        <title>Overview</title>
 !Pdrivers/gpu/drm/drm_mm.c Overview
-	</sect3>
-	<sect3>
-	  <title>LRU Scan/Eviction Support</title>
+      </sect3>
+      <sect3>
+        <title>LRU Scan/Eviction Support</title>
 !Pdrivers/gpu/drm/drm_mm.c lru scan roaster
-	</sect3>
+      </sect3>
       </sect2>
-      <sect2>
-	<title>DRM MM Range Allocator Function References</title>
+    <sect2>
+      <title>DRM MM Range Allocator Function References</title>
 !Edrivers/gpu/drm/drm_mm.c
 !Iinclude/drm/drm_mm.h
-      </sect2>
+    </sect2>
+    <sect2>
+      <title>CMA Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_gem_cma_helper.c cma helpers
+!Edrivers/gpu/drm/drm_gem_cma_helper.c
+!Iinclude/drm/drm_gem_cma_helper.h
+    </sect2>
   </sect1>
 
   <!-- Internals: mode setting -->
@@ -996,6 +1002,10 @@ int max_width, max_height;</synopsis>
 !Edrivers/gpu/drm/drm_modes.c
     </sect2>
     <sect2>
+      <title>Atomic Mode Setting Function Reference</title>
+!Edrivers/gpu/drm/drm_atomic.c
+    </sect2>
+    <sect2>
       <title>Frame Buffer Creation</title>
       <synopsis>struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
 				     struct drm_file *file_priv,
@@ -1827,6 +1837,10 @@ void intel_crt_init(struct drm_device *dev)
 !Edrivers/gpu/drm/drm_crtc.c
     </sect2>
     <sect2>
+      <title>KMS Data Structures</title>
+!Iinclude/drm/drm_crtc.h
+    </sect2>
+    <sect2>
       <title>KMS Locking</title>
 !Pdrivers/gpu/drm/drm_modeset_lock.c kms locking
 !Iinclude/drm/drm_modeset_lock.h
@@ -1933,10 +1947,16 @@ void intel_crt_init(struct drm_device *dev)
             and then retrieves a list of modes by calling the connector
             <methodname>get_modes</methodname> helper operation.
           </para>
+         <para>
+            If the helper operation returns no mode, and if the connector status
+            is connector_status_connected, standard VESA DMT modes up to
+            1024x768 are automatically added to the modes list by a call to
+            <function>drm_add_modes_noedid</function>.
+          </para>
           <para>
-            The function filters out modes larger than
+            The function then filters out modes larger than
             <parameter>max_width</parameter> and <parameter>max_height</parameter>
-            if specified. It then calls the optional connector
+            if specified. It finally calls the optional connector
             <methodname>mode_valid</methodname> helper operation for each mode in
             the probed list to check whether the mode is valid for the connector.
           </para>
@@ -2076,12 +2096,20 @@ void intel_crt_init(struct drm_device *dev)
           <synopsis>int (*get_modes)(struct drm_connector *connector);</synopsis>
           <para>
             Fill the connector's <structfield>probed_modes</structfield> list
-            by parsing EDID data with <function>drm_add_edid_modes</function> or
-            calling <function>drm_mode_probed_add</function> directly for every
+            by parsing EDID data with <function>drm_add_edid_modes</function>,
+            adding standard VESA DMT modes with <function>drm_add_modes_noedid</function>,
+            or calling <function>drm_mode_probed_add</function> directly for every
             supported mode and return the number of modes it has detected. This
             operation is mandatory.
           </para>
           <para>
+            Note that the caller function will automatically add standard VESA
+            DMT modes up to 1024x768 if the <methodname>get_modes</methodname>
+            helper operation returns no mode and if the connector status is
+            connector_status_connected. There is no need to call
+            <function>drm_add_edid_modes</function> manually in that case.
+          </para>
+          <para>
             When adding modes manually the driver creates each mode with a call to
             <function>drm_mode_create</function> and must fill the following fields.
             <itemizedlist>
@@ -2278,7 +2306,7 @@ void intel_crt_init(struct drm_device *dev)
             <function>drm_helper_probe_single_connector_modes</function>.
           </para>
           <para>
-            When parsing EDID data, <function>drm_add_edid_modes</function> fill the
+            When parsing EDID data, <function>drm_add_edid_modes</function> fills the
             connector <structfield>display_info</structfield>
             <structfield>width_mm</structfield> and
             <structfield>height_mm</structfield> fields. When creating modes
@@ -2316,8 +2344,26 @@ void intel_crt_init(struct drm_device *dev)
       </itemizedlist>
     </sect2>
     <sect2>
+      <title>Atomic Modeset Helper Functions Reference</title>
+      <sect3>
+	<title>Overview</title>
+!Pdrivers/gpu/drm/drm_atomic_helper.c overview
+      </sect3>
+      <sect3>
+	<title>Implementing Asynchronous Atomic Commit</title>
+!Pdrivers/gpu/drm/drm_atomic_helper.c implementing async commit
+      </sect3>
+      <sect3>
+	<title>Atomic State Reset and Initialization</title>
+!Pdrivers/gpu/drm/drm_atomic_helper.c atomic state reset and initialization
+      </sect3>
+!Iinclude/drm/drm_atomic_helper.h
+!Edrivers/gpu/drm/drm_atomic_helper.c
+    </sect2>
+    <sect2>
       <title>Modeset Helper Functions Reference</title>
 !Edrivers/gpu/drm/drm_crtc_helper.c
+!Pdrivers/gpu/drm/drm_crtc_helper.c overview
     </sect2>
     <sect2>
       <title>Output Probing Helper Functions Reference</title>
@@ -2343,6 +2389,12 @@ void intel_crt_init(struct drm_device *dev)
 !Edrivers/gpu/drm/drm_dp_mst_topology.c
     </sect2>
     <sect2>
+      <title>MIPI DSI Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_mipi_dsi.c dsi helpers
+!Iinclude/drm/drm_mipi_dsi.h
+!Edrivers/gpu/drm/drm_mipi_dsi.c
+    </sect2>
+    <sect2>
       <title>EDID Helper Functions Reference</title>
 !Edrivers/gpu/drm/drm_edid.c
     </sect2>
@@ -2371,7 +2423,12 @@ void intel_crt_init(struct drm_device *dev)
     </sect2>
     <sect2>
       <title id="drm-kms-planehelpers">Plane Helper Reference</title>
-!Edrivers/gpu/drm/drm_plane_helper.c Plane Helpers
+!Edrivers/gpu/drm/drm_plane_helper.c
+!Pdrivers/gpu/drm/drm_plane_helper.c overview
+    </sect2>
+    <sect2>
+	  <title>Tile group</title>
+!Pdrivers/gpu/drm/drm_crtc.c Tile group
     </sect2>
   </sect1>
 
@@ -2507,8 +2564,8 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >Description/Restrictions</td>
 	</tr>
 	<tr>
-	<td rowspan="21" valign="top" >DRM</td>
-	<td rowspan="2" valign="top" >Generic</td>
+	<td rowspan="25" valign="top" >DRM</td>
+	<td rowspan="4" valign="top" >Generic</td>
 	<td valign="top" >“EDID”</td>
 	<td valign="top" >BLOB | IMMUTABLE</td>
 	<td valign="top" >0</td>
@@ -2523,6 +2580,20 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >Contains DPMS operation mode value.</td>
 	</tr>
 	<tr>
+	<td valign="top" >“PATH”</td>
+	<td valign="top" >BLOB | IMMUTABLE</td>
+	<td valign="top" >0</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >Contains topology path to a connector.</td>
+	</tr>
+	<tr>
+	<td valign="top" >“TILE”</td>
+	<td valign="top" >BLOB | IMMUTABLE</td>
+	<td valign="top" >0</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >Contains tiling information for a connector.</td>
+	</tr>
+	<tr>
 	<td rowspan="1" valign="top" >Plane</td>
 	<td valign="top" >“type”</td>
 	<td valign="top" >ENUM | IMMUTABLE</td>
@@ -2638,6 +2709,21 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
+	<td rowspan="2" valign="top" >Virtual GPU</td>
+	<td valign="top" >“suggested X”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0xffffffff</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >property to suggest an X offset for a connector</td>
+	</tr>
+	<tr>
+	<td valign="top" >“suggested Y”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0xffffffff</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >property to suggest an Y offset for a connector</td>
+	</tr>
+	<tr>
 	<td rowspan="3" valign="top" >Optional</td>
 	<td valign="top" >“scaling mode”</td>
 	<td valign="top" >ENUM</td>
@@ -3788,6 +3874,26 @@ int num_ioctls;</synopsis>
       those have basic support through the gma500 drm driver.
     </para>
     <sect1>
+      <title>Core Driver Infrastructure</title>
+      <para>
+	This section covers core driver infrastructure used by both the display
+	and the GEM parts of the driver.
+      </para>
+      <sect2>
+        <title>Runtime Power Management</title>
+!Pdrivers/gpu/drm/i915/intel_runtime_pm.c runtime pm
+!Idrivers/gpu/drm/i915/intel_runtime_pm.c
+      </sect2>
+      <sect2>
+        <title>Interrupt Handling</title>
+!Pdrivers/gpu/drm/i915/i915_irq.c interrupt handling
+!Fdrivers/gpu/drm/i915/i915_irq.c intel_irq_init intel_irq_init_hw intel_hpd_init
+!Fdrivers/gpu/drm/i915/i915_irq.c intel_irq_fini
+!Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_disable_interrupts
+!Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_enable_interrupts
+      </sect2>
+    </sect1>
+    <sect1>
       <title>Display Hardware Handling</title>
       <para>
         This section covers everything related to the display hardware including
@@ -3804,6 +3910,18 @@ int num_ioctls;</synopsis>
         </para>
       </sect2>
       <sect2>
+        <title>Frontbuffer Tracking</title>
+!Pdrivers/gpu/drm/i915/intel_frontbuffer.c frontbuffer tracking
+!Idrivers/gpu/drm/i915/intel_frontbuffer.c
+!Fdrivers/gpu/drm/i915/intel_drv.h intel_frontbuffer_flip
+!Fdrivers/gpu/drm/i915/i915_gem.c i915_gem_track_fb
+      </sect2>
+      <sect2>
+        <title>Display FIFO Underrun Reporting</title>
+!Pdrivers/gpu/drm/i915/intel_fifo_underrun.c fifo underrun handling
+!Idrivers/gpu/drm/i915/intel_fifo_underrun.c
+      </sect2>
+      <sect2>
         <title>Plane Configuration</title>
         <para>
 	  This section covers plane configuration and composition with the
@@ -3823,6 +3941,16 @@ int num_ioctls;</synopsis>
         </para>
       </sect2>
       <sect2>
+	<title>High Definition Audio</title>
+!Pdrivers/gpu/drm/i915/intel_audio.c High Definition Audio over HDMI and Display Port
+!Idrivers/gpu/drm/i915/intel_audio.c
+      </sect2>
+      <sect2>
+	<title>Panel Self Refresh PSR (PSR/SRD)</title>
+!Pdrivers/gpu/drm/i915/intel_psr.c Panel Self Refresh (PSR/SRD)
+!Idrivers/gpu/drm/i915/intel_psr.c
+      </sect2>
+      <sect2>
         <title>DPIO</title>
 !Pdrivers/gpu/drm/i915/i915_reg.h DPIO
 	<table id="dpiox2">
@@ -3931,6 +4059,28 @@ int num_ioctls;</synopsis>
 !Idrivers/gpu/drm/i915/intel_lrc.c
       </sect2>
     </sect1>
+
+    <sect1>
+      <title> Tracing </title>
+      <para>
+    This sections covers all things related to the tracepoints implemented in
+    the i915 driver.
+      </para>
+      <sect2>
+        <title> i915_ppgtt_create and i915_ppgtt_release </title>
+!Pdrivers/gpu/drm/i915/i915_trace.h i915_ppgtt_create and i915_ppgtt_release tracepoints
+      </sect2>
+      <sect2>
+        <title> i915_context_create and i915_context_free </title>
+!Pdrivers/gpu/drm/i915/i915_trace.h i915_context_create and i915_context_free tracepoints
+      </sect2>
+      <sect2>
+        <title> switch_mm </title>
+!Pdrivers/gpu/drm/i915/i915_trace.h switch_mm tracepoint
+      </sect2>
+    </sect1>
+
   </chapter>
+!Cdrivers/gpu/drm/i915/i915_irq.c
 </part>
 </book>
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
index e75f0e549ff..e75f0e549ff 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt b/Documentation/devicetree/bindings/drm/imx/hdmi.txt
index 1b756cf9afb..1b756cf9afb 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
+++ b/Documentation/devicetree/bindings/drm/imx/hdmi.txt
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt b/Documentation/devicetree/bindings/drm/imx/ldb.txt
index 443bcb6134d..443bcb6134d 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
+++ b/Documentation/devicetree/bindings/drm/imx/ldb.txt
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index b48f4ef31d9..4c32ef0b7db 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -191,6 +191,8 @@ of the following host1x client modules:
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
   - nvidia,edid: supplies a binary EDID blob
   - nvidia,panel: phandle of a display panel
+  - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
+    up with in order to support up to 8 data lanes
 
 - sor: serial output resource
 
diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
index 2d150c311a0..c99eb34e640 100644
--- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
+++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
@@ -68,7 +68,7 @@ STMicroelectronics stih4xx platforms
     number of clocks may depend of the SoC type.
   - clock-names: names of the clocks listed in clocks property in the same
     order.
-  - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
+  - ddc: phandle of an I2C controller used for DDC EDID probing
 
 sti-hda:
   Required properties:
@@ -83,6 +83,22 @@ sti-hda:
   - clock-names: names of the clocks listed in clocks property in the same
     order.
 
+sti-hqvdp:
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-hqvdp"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+  - st,vtg: phandle on vtg main device node.
+
 Example:
 
 / {
@@ -173,7 +189,6 @@ Example:
 				interrupt-names	= "irq";
 				clock-names	= "pix", "tmds", "phy", "audio";
 				clocks          = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
-				hdmi,hpd-gpio	= <&PIO2 5>;
 			};
 
 			sti-hda@fe85a000 {
@@ -184,6 +199,16 @@ Example:
 				clocks          = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
 			};
 		};
+
+		sti-hqvdp@9c000000 {
+				compatible	= "st,stih407-hqvdp";
+				reg		= <0x9C00000 0x100000>;
+				clock-names	= "hqvdp", "pix_main";
+				clocks		= <&clk_s_c0_flexgen CLK_MAIN_DISP>, <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+				reset-names     = "hqvdp";
+				resets          = <&softreset STIH407_HDQVDP_SOFTRESET>;
+				st,vtg		= <&vtg_main>;
+			};
 	};
 	...
 };
diff --git a/Documentation/devicetree/bindings/panel/auo,b116xw03.txt b/Documentation/devicetree/bindings/panel/auo,b116xw03.txt
new file mode 100644
index 00000000000..690d0a568ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/auo,b116xw03.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+
+Required properties:
+- compatible: should be "auo,b116xw03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/hannstar,hsd070pww1.txt b/Documentation/devicetree/bindings/panel/hannstar,hsd070pww1.txt
new file mode 100644
index 00000000000..7da1d5c038f
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/hannstar,hsd070pww1.txt
@@ -0,0 +1,7 @@
+HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "hannstar,hsd070pww1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt b/Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt
new file mode 100644
index 00000000000..04caaae19af
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt
@@ -0,0 +1,7 @@
+Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+
+Required properties:
+- compatible: should be "hit,tx23d38vm0caa"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/innolux,g121i1-l01.txt b/Documentation/devicetree/bindings/panel/innolux,g121i1-l01.txt
new file mode 100644
index 00000000000..2743b07cd2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/innolux,g121i1-l01.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g121i1-l01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt b/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt
new file mode 100644
index 00000000000..f522bb8e47e
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt
@@ -0,0 +1,49 @@
+Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+This panel requires a dual-channel DSI host to operate. It supports two modes:
+- left-right: each channel drives the left or right half of the screen
+- even-odd: each channel drives the even or odd lines of the screen
+
+Each of the DSI channels controls a separate DSI peripheral. The peripheral
+driven by the first link (DSI-LINK1), left or even, is considered the primary
+peripheral and controls the device. The 'link2' property contains a phandle
+to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+Note that in video mode the DSI-LINK1 interface always provides the left/even
+pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+is possible to program either link to drive the left/even or right/odd pixels
+but for the sake of consistency this binding assumes that the same assignment
+is chosen as for video mode.
+
+Required properties:
+- compatible: should be "sharp,lq101r1sx01"
+- reg: DSI virtual channel of the peripheral
+
+Required properties (for DSI-LINK1 only):
+- link2: phandle to the DSI peripheral on the secondary link. Note that the
+  presence of this property marks the containing node as DSI-LINK1.
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties (for DSI-LINK1 only):
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	dsi@54300000 {
+		panel: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+
+			link2 = <&secondary>;
+
+			power-supply = <...>;
+			backlight = <...>;
+		};
+	};
+
+	dsi@54400000 {
+		secondary: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index cc6151c431c..423d47418e7 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -66,8 +66,10 @@ gmt	Global Mixed-mode Technology, Inc.
 google	Google, Inc.
 gumstix	Gumstix, Inc.
 gw	Gateworks Corporation
+hannstar	HannStar Display Corporation
 haoyu	Haoyu Microelectronic Co. Ltd.
 hisilicon	Hisilicon Limited.
+hit	Hitachi Ltd.
 honeywell	Honeywell
 hp	Hewlett Packard
 i2se	I2SE GmbH
diff --git a/Documentation/devicetree/bindings/video/adi,adv7511.txt b/Documentation/devicetree/bindings/video/adi,adv7511.txt
new file mode 100644
index 00000000000..96c25ee0150
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/adi,adv7511.txt
@@ -0,0 +1,88 @@
+Analog Device ADV7511(W)/13 HDMI Encoders
+-----------------------------------------
+
+The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters
+compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
+S/PDIF, CEC and HDCP.
+
+Required properties:
+
+- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or "adi,adv7513"
+- reg: I2C slave address
+
+The ADV7511 supports a large number of input data formats that differ by their
+color depth, color format, clock mode, bit justification and random
+arrangement of components on the data bus. The combination of the following
+properties describe the input and map directly to the video input tables of the
+ADV7511 datasheet that document all the supported combinations.
+
+- adi,input-depth: Number of bits per color component at the input (8, 10 or
+  12).
+- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or
+  "yuv444".
+- adi,input-clock: The input clock type, one of "1x" (one clock cycle per
+  pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel,
+  data driven on both edges).
+
+The following input format properties are required except in "rgb 1x" and
+"yuv444 1x" modes, in which case they must not be specified.
+
+- adi,input-style: The input components arrangement variant (1, 2 or 3), as
+  listed in the input format tables in the datasheet.
+- adi,input-justification: The input bit justification ("left", "evenly",
+  "right").
+
+Optional properties:
+
+- interrupts: Specifier for the ADV7511 interrupt
+- pd-gpios: Specifier for the GPIO connected to the power down signal
+
+- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps
+  (-1200 ps .. 1600 ps). Defaults to no delay.
+- adi,embedded-sync: The input uses synchronization signals embedded in the
+  data stream (similar to BT.656). Defaults to separate H/V synchronization
+  signals.
+
+Required nodes:
+
+The ADV7511 has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for the RGB or YUV input
+- Video port 1 for the HDMI output
+
+
+Example
+-------
+
+	adv7511w: hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511w_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
index e74243b4b31..ca2b4aacd9a 100644
--- a/Documentation/devicetree/bindings/video/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
@@ -4,6 +4,7 @@ Required properties:
   - compatible: value should be one of the following
 		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
+		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt
diff --git a/Documentation/devicetree/bindings/video/rockchip-drm.txt b/Documentation/devicetree/bindings/video/rockchip-drm.txt
new file mode 100644
index 00000000000..7fff582495a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/rockchip-drm.txt
@@ -0,0 +1,19 @@
+Rockchip DRM master device
+================================
+
+The Rockchip DRM master device is a virtual device needed to list all
+vop devices or other display interface nodes that comprise the
+graphics subsystem.
+
+Required properties:
+- compatible: Should be "rockchip,display-subsystem"
+- ports: Should contain a list of phandles pointing to display interface port
+  of vop devices. vop definitions as defined in
+  Documentation/devicetree/bindings/video/rockchip-vop.txt
+
+example:
+
+display-subsystem {
+	compatible = "rockchip,display-subsystem";
+	ports = <&vopl_out>, <&vopb_out>;
+};
diff --git a/Documentation/devicetree/bindings/video/rockchip-vop.txt b/Documentation/devicetree/bindings/video/rockchip-vop.txt
new file mode 100644
index 00000000000..d15351f2313
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/rockchip-vop.txt
@@ -0,0 +1,58 @@
+device-tree bindings for rockchip soc display controller (vop)
+
+VOP (Visual Output Processor) is the Display Controller for the Rockchip
+series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be one of the following
+		"rockchip,rk3288-vop";
+
+- interrupts: should contain a list of all VOP IP block interrupts in the
+		 order: VSYNC, LCD_SYSTEM. The interrupt specifier
+		 format depends on the interrupt controller used.
+
+- clocks: must include clock specifiers corresponding to entries in the
+		clock-names property.
+
+- clock-names: Must contain
+		aclk_vop: for ddr buffer transfer.
+		hclk_vop: for ahb bus to R/W the phy regs.
+		dclk_vop: pixel clock.
+
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - axi
+  - ahb
+  - dclk
+
+- iommus: required a iommu node
+
+- port: A port node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+SoC specific DT entry:
+	vopb: vopb@ff930000 {
+		compatible = "rockchip,rk3288-vop";
+		reg = <0xff930000 0x19c>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopb_mmu>;
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			vopb_out_edp: endpoint@0 {
+				reg = <0>;
+				remote-endpoint=<&edp_in_vopb>;
+			};
+			vopb_out_hdmi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint=<&hdmi_in_vopb>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt
index 4e6c77c8554..cf1af637102 100644
--- a/Documentation/devicetree/bindings/video/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt
@@ -11,6 +11,7 @@ Required properties:
 		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
 		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
 		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
 
 - reg: physical base address and length of the FIMD registers set.