Merge tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/Serial merge from Greg Kroah-Hartman:
 "Here's the big tty/serial tree set of changes for 3.8-rc1.

  Contained in here is a bunch more reworks of the tty port layer from
  Jiri and bugfixes from Alan, along with a number of other tty and
  serial driver updates by the various driver authors.

  Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the
  TTY layer, which is much appreciated by me.

  All of these have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up some trivial conflicts in the staging tree, due to the fwserial
driver having come in both ways (but fixed up a bit in the serial tree),
and the ioctl handling in the dgrp driver having been done slightly
differently (staging tree got that one right, and removed both
TIOCGSOFTCAR and TIOCSSOFTCAR).

* tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (146 commits)
  staging: sb105x: fix potential NULL pointer dereference in mp_chars_in_buffer()
  staging/fwserial: Remove superfluous free
  staging/fwserial: Use WARN_ONCE when port table is corrupted
  staging/fwserial: Destruct embedded tty_port on teardown
  staging/fwserial: Fix build breakage when !CONFIG_BUG
  staging: fwserial: Add TTY-over-Firewire serial driver
  drivers/tty/serial/serial_core.c: clean up HIGH_BITS_OFFSET usage
  staging: dgrp: dgrp_tty.c: Audit the return values of get/put_user()
  staging: dgrp: dgrp_tty.c: Remove the TIOCSSOFTCAR ioctl handler from dgrp driver
  serial: ifx6x60: Add modem power off function in the platform reboot process
  serial: mxs-auart: unmap the scatter list before we copy the data
  serial: mxs-auart: disable the Receive Timeout Interrupt when DMA is enabled
  serial: max310x: Setup missing "can_sleep" field for GPIO
  tty/serial: fix ifx6x60.c declaration warning
  serial: samsung: add devicetree properties for non-Exynos SoCs
  serial: samsung: fix potential soft lockup during uart write
  tty: vt: Remove redundant null check before kfree.
  tty/8250 Add check for pci_ioremap_bar failure
  tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards
  tty/8250 Add XR17D15x devices to the exar_handle_irq override
  ...

3 files changed, 124 insertions, 1 deletions

diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index 0c430150d92..ad22fb0ee76 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -26,3 +26,115 @@ Description:
 		 UART port in serial_core, that is bound to TTY like ttyS0.
 		 uartclk = 16 * baud_base
 
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/type
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty type for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/line
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty line number for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/port
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty port I/O address for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/irq
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current primary interrupt for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/flags
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the tty port status flags for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/xmit_fifo_size
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the transmit FIFO size for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/close_delay
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the closing delay time for this port in ms.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/closing_wait
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the close wait time for this port in ms.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/custom_divisor
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the custom divisor if any that is set on this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/io_type
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the I/O type that is to be used with the iomem base
+		 address.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/iomem_base
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 The I/O memory base for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/iomem_reg_shift
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the register shift indicating the spacing to be used
+		 for accesses on this iomem address.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
index 2ee903fad25..273a8d5b330 100644
--- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
@@ -6,11 +6,19 @@ Required properties:
 - reg : Address and length of the register set for the device
 - interrupts : Should contain the auart interrupt numbers
 
+Optional properties:
+- fsl,auart-dma-channel : The DMA channels, the first is for RX, the other
+		is for TX. If you add this property, it also means that you
+		will enable the DMA support for the auart.
+		Note: due to the hardware bug in imx23(see errata : 2836),
+		only the imx28 can enable the DMA support for the auart.
+
 Example:
 auart0: serial@8006a000 {
 	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 	reg = <0x8006a000 0x2000>;
 	interrupts = <112 70 71>;
+	fsl,auart-dma-channel = <8 9>;
 };
 
 Note: Each auart port should have an alias correctly numbered in "aliases"
diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index ba385f2e0dd..1e1145ca4f3 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -14,7 +14,10 @@ Required properties:
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.
-- clock-frequency : the input clock frequency for the UART.
+- clock-frequency : the input clock frequency for the UART
+	 or
+  clocks phandle to refer to the clk used as per Documentation/devicetree
+  /bindings/clock/clock-bindings.txt
 
 Optional properties:
 - current-speed : the current active speed of the UART.