Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...

6 files changed, 103 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index bae0d87a38b..5573c08d318 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -50,6 +50,11 @@ Optional
   regions, used when the GIC doesn't have banked registers. The offset is
   cpu-offset * cpu-nr.
 
+- arm,routable-irqs : Total number of gic irq inputs which are not directly
+		  connected from the peripherals, but are routed dynamically
+		  by a crossbar/multiplexer preceding the GIC. The GIC irq
+		  input line is assigned dynamically when the corresponding
+		  peripheral's crossbar line is mapped.
 Example:
 
 	intc: interrupt-controller@fff11000 {
@@ -57,6 +62,7 @@ Example:
 		#interrupt-cells = <3>;
 		#address-cells = <1>;
 		interrupt-controller;
+		arm,routable-irqs = <160>;
 		reg = <0xfff11000 0x1000>,
 		      <0xfff10100 0x100>;
 	};
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
new file mode 100644
index 00000000000..fb88585cfb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -0,0 +1,27 @@
+Some socs have a large number of interrupts requests to service
+the needs of its many peripherals and subsystems. All of the
+interrupt lines from the subsystems are not needed at the same
+time, so they have to be muxed to the irq-controller appropriately.
+In such places a interrupt controllers are preceded by an CROSSBAR
+that provides flexibility in muxing the device requests to the controller
+inputs.
+
+Required properties:
+- compatible : Should be "ti,irq-crossbar"
+- reg: Base address and the size of the crossbar registers.
+- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,reg-size: Size of a individual register in bytes. Every individual
+	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
+- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
+		 crossbar. These interrupt lines are reserved in the soc,
+		 so crossbar bar driver should not consider them as free
+		 lines.
+
+Examples:
+		crossbar_mpu: @4a020000 {
+			compatible = "ti,irq-crossbar";
+			reg = <0x4a002a48 0x130>;
+			ti,max-irqs = <160>;
+			ti,reg-size = <2>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+		};
diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt
new file mode 100644
index 00000000000..652914b17b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm-integrator.txt
@@ -0,0 +1,34 @@
+Clock bindings for ARM Integrator Core Module clocks
+
+Auxilary Oscillator Clock
+
+This is a configurable clock fed from a 24 MHz chrystal,
+used for generating e.g. video clocks. It is located on the
+core module and there is only one of these.
+
+This clock node *must* be a subnode of the core module, since
+it obtains the base address for it's address range from its
+parent node.
+
+
+Required properties:
+- compatible: must be "arm,integrator-cm-auxosc"
+- #clock-cells: must be <0>
+
+Optional properties:
+- clocks: parent clock(s)
+
+Example:
+
+core-module@10000000 {
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+	auxosc: cm_aux_osc@25M {
+		#clock-cells = <0>;
+		compatible = "arm,integrator-cm-auxosc";
+		clocks = <&xtal24mhz>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
new file mode 100644
index 00000000000..4897bea7e3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
@@ -0,0 +1,23 @@
+* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+	- "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
+
+Example:
+
+	mmc: dwmmc0@ff704000 {
+		compatible = "altr,socfpga-dw-mshc";
+		reg = <0xff704000 0x1000>;
+		interrupts = <0 129 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index 0347d8350d9..af25e77c0e0 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
 Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
 
 - reg: Address and length of the register set for UART1
 - clocks: tclk clock
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
index 5dc8d30061c..de11eb4c121 100644
--- a/Documentation/devicetree/bindings/watchdog/marvel.txt
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -3,17 +3,24 @@
 Required Properties:
 
 - Compatibility : "marvell,orion-wdt"
-- reg		: Address of the timer registers
+		  "marvell,armada-370-wdt"
+		  "marvell,armada-xp-wdt"
+
+- reg		: Should contain two entries: first one with the
+		  timer control address, second one with the
+		  rstout enable address.
 
 Optional properties:
 
+- interrupts	: Contains the IRQ for watchdog expiration
 - timeout-sec	: Contains the watchdog timeout in seconds
 
 Example:
 
 	wdt@20300 {
 		compatible = "marvell,orion-wdt";
-		reg = <0x20300 0x28>;
+		reg = <0x20300 0x28>, <0x20108 0x4>;
+		interrupts = <3>;
 		timeout-sec = <10>;
 		status = "okay";
 	};