summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-01-30 18:08:27 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-30 18:08:27 -0800
commitf8a504c404c6c4abbed4ae34fe1027ba3c24d035 (patch)
tree2566aeb4295dd9a1b06961c23b8441c344f8378c /Documentation
parentcdfc83075fb76369a31e6c187d0cebcab9f8b9c8 (diff)
parent929267cb3525daf72f730f4d4c4e1e9e2b135e61 (diff)
Merge tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late but were considered self-contained enough to still go in for v3.14. They are all device tree updtes this time around, and mainly for Broadcom SoCs" * tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: moxart: move fixed rate clock child node to board level dts clk: bcm281xx: define kona clock binding ARM: dts: add usb udc support to bcm281xx ARM: dts: Specify clocks for timer on bcm11351 Documentation: dt: kona-timer: Add clocks property ARM: dts: Specify clocks for SDHCIs on bcm11351 Documentation: dt: kona-sdhci: Add clocks property ARM: dts: Specify clocks for UARTs on bcm11351 ARM: dts: bcm281xx: Add i2c busses ARM: dts: Declare clocks as fixed on bcm11351 ARM: dts: bcm28155-ap: Enable all the i2c busses
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/kona-timer.txt7
-rw-r--r--Documentation/devicetree/bindings/clock/bcm-kona-clock.txt93
-rw-r--r--Documentation/devicetree/bindings/mmc/kona-sdhci.txt4
3 files changed, 103 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
index 17d88b233d1..39adf54b438 100644
--- a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
@@ -8,13 +8,18 @@ Required properties:
- DEPRECATED: compatible : "bcm,kona-timer"
- reg : Register range for the timer
- interrupts : interrupt for the timer
+- clocks: phandle + clock specifier pair of the external clock
- clock-frequency: frequency that the clock operates
+Only one of clocks or clock-frequency should be specified.
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
Example:
timer@35006000 {
compatible = "brcm,kona-timer";
reg = <0x35006000 0x1000>;
interrupts = <0x0 7 0x4>;
- clock-frequency = <32768>;
+ clocks = <&hub_timer_clk>;
};
diff --git a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
new file mode 100644
index 00000000000..56d1f496107
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
@@ -0,0 +1,93 @@
+Broadcom Kona Family Clocks
+
+This binding is associated with Broadcom SoCs having "Kona" style
+clock control units (CCUs). A CCU is a clock provider that manages
+a set of clock signals. Each CCU is represented by a node in the
+device tree.
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible
+ Shall have one of the following values:
+ - "brcm,bcm11351-root-ccu"
+ - "brcm,bcm11351-aon-ccu"
+ - "brcm,bcm11351-hub-ccu"
+ - "brcm,bcm11351-master-ccu"
+ - "brcm,bcm11351-slave-ccu"
+- reg
+ Shall define the base and range of the address space
+ containing clock control registers
+- #clock-cells
+ Shall have value <1>. The permitted clock-specifier values
+ are defined below.
+- clock-output-names
+ Shall be an ordered list of strings defining the names of
+ the clocks provided by the CCU.
+
+
+BCM281XX family SoCs use Kona CCUs. The following table defines
+the set of CCUs and clock specifiers for BCM281XX clocks. When
+a clock consumer references a clocks, its symbolic specifier
+(rather than its numeric index value) should be used. These
+specifiers are defined in "include/dt-bindings/clock/bcm281xx.h".
+
+ CCU Clock Type Index Specifier
+ --- ----- ---- ----- ---------
+ root frac_1m peri 0 BCM281XX_ROOT_CCU_FRAC_1M
+
+ aon hub_timer peri 0 BCM281XX_AON_CCU_HUB_TIMER
+ aon pmu_bsc peri 1 BCM281XX_AON_CCU_PMU_BSC
+ aon pmu_bsc_var peri 2 BCM281XX_AON_CCU_PMU_BSC_VAR
+
+ hub tmon_1m peri 0 BCM281XX_HUB_CCU_TMON_1M
+
+ master sdio1 peri 0 BCM281XX_MASTER_CCU_SDIO1
+ master sdio2 peri 1 BCM281XX_MASTER_CCU_SDIO2
+ master sdio3 peri 2 BCM281XX_MASTER_CCU_SDIO3
+ master sdio4 peri 3 BCM281XX_MASTER_CCU_SDIO4
+ master dmac peri 4 BCM281XX_MASTER_CCU_DMAC
+ master usb_ic peri 5 BCM281XX_MASTER_CCU_USB_IC
+ master hsic2_48m peri 6 BCM281XX_MASTER_CCU_HSIC_48M
+ master hsic2_12m peri 7 BCM281XX_MASTER_CCU_HSIC_12M
+
+ slave uartb peri 0 BCM281XX_SLAVE_CCU_UARTB
+ slave uartb2 peri 1 BCM281XX_SLAVE_CCU_UARTB2
+ slave uartb3 peri 2 BCM281XX_SLAVE_CCU_UARTB3
+ slave uartb4 peri 3 BCM281XX_SLAVE_CCU_UARTB4
+ slave ssp0 peri 4 BCM281XX_SLAVE_CCU_SSP0
+ slave ssp2 peri 5 BCM281XX_SLAVE_CCU_SSP2
+ slave bsc1 peri 6 BCM281XX_SLAVE_CCU_BSC1
+ slave bsc2 peri 7 BCM281XX_SLAVE_CCU_BSC2
+ slave bsc3 peri 8 BCM281XX_SLAVE_CCU_BSC3
+ slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM
+
+
+Device tree example:
+
+ slave_ccu: slave_ccu {
+ compatible = "brcm,bcm11351-slave-ccu";
+ reg = <0x3e011000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "uartb",
+ "uartb2",
+ "uartb3",
+ "uartb4";
+ };
+
+ ref_crystal_clk: ref_crystal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ uart@3e002000 {
+ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+ status = "disabled";
+ reg = <0x3e002000 0x1000>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt
index 789fb07a426..aaba2483b4f 100644
--- a/Documentation/devicetree/bindings/mmc/kona-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt
@@ -6,12 +6,16 @@ and the properties present in the bcm281xx SDHCI
Required properties:
- compatible : Should be "brcm,kona-sdhci"
- DEPRECATED: compatible : Should be "bcm,kona-sdhci"
+- clocks: phandle + clock specifier pair of the external clock
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
Example:
sdio2: sdio@0x3f1a0000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f1a0000 0x10000>;
+ clocks = <&sdio3_clk>;
interrupts = <0x0 74 0x4>;
};