diff options
| author | Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> | 2014-11-17 14:35:46 +0100 |
|---|---|---|
| committer | Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> | 2014-11-18 20:33:55 +0100 |
| commit | e802b3a2bfd4f52a9b23037800fa0965aae92013 (patch) | |
| tree | a4ba32fe08303716583d06cac20d270a31f03517 /arch/arm/boot/dts/berlin2cd.dtsi | |
| parent | fe354939edffe1f2579b4b372bad44e72bd9a9b3 (diff) | |
ARM: dts: berlin: add BG2CD nodes for USB support
Adds nodes describing the Marvell Berlin BG2CD USB PHY and USB. The BG2CD
SoC has 2 USB ChipIdea controllers, with usb0 host-only and usb1 dual-role
capable.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Diffstat (limited to 'arch/arm/boot/dts/berlin2cd.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/berlin2cd.dtsi | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 9e338ff80fd..230df3b1770 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -75,6 +75,22 @@ clocks = <&chip CLKID_TWD>; }; + usb_phy0: usb-phy@b74000 { + compatible = "marvell,berlin2cd-usb-phy"; + reg = <0xb74000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x178 23>; + status = "disabled"; + }; + + usb_phy1: usb-phy@b78000 { + compatible = "marvell,berlin2cd-usb-phy"; + reg = <0xb78000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x178 24>; + status = "disabled"; + }; + eth1: ethernet@b90000 { compatible = "marvell,pxa168-eth"; reg = <0xb90000 0x10000>; @@ -287,6 +303,26 @@ }; }; + usb0: usb@ed0000 { + compatible = "chipidea,usb2"; + reg = <0xed0000 0x200>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_USB0>; + phys = <&usb_phy0>; + phy-names = "usb-phy"; + status = "disabled"; + }; + + usb1: usb@ee0000 { + compatible = "chipidea,usb2"; + reg = <0xee0000 0x200>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_USB1>; + phys = <&usb_phy1>; + phy-names = "usb-phy"; + status = "disabled"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; |