ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard

This patch adds support for the cpuimx27 board from Eukrea and its
baseboard. This change is intended to further remove non-DT support
for this board.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

1 files changed, 296 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
new file mode 100644
index 00000000000..e2242638ea0
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX27";
+	compatible = "eukrea,cpuimx27", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		clk14745600: clock@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <14745600>;
+			reg = <0>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x04000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
+	};
+
+	uart8250@3,200000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_1>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x200000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,400000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_2>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x400000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,800000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_3>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x800000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,1000000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_4>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x1000000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
+				MX27_PAD_ATA_DATA13__FEC_COL		0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA		0x0
+				MX27_PAD_I2C_CLK__I2C_CLK		0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB			0x0
+				MX27_PAD_NFCLE__NFCLE			0x0
+				MX27_PAD_NFWP_B__NFWP_B			0x0
+				MX27_PAD_NFCE_B__NFCE_B			0x0
+				MX27_PAD_NFALE__NFALE			0x0
+				MX27_PAD_NFRE_B__NFRE_B			0x0
+				MX27_PAD_NFWE_B__NFWE_B			0x0
+			>;
+		};
+
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE			0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK		0x0
+				MX27_PAD_SD2_CMD__SD2_CMD		0x0
+				MX27_PAD_SD2_D0__SD2_D0			0x0
+				MX27_PAD_SD2_D1__SD2_D1			0x0
+				MX27_PAD_SD2_D2__SD2_D2			0x0
+				MX27_PAD_SD2_D3__SD2_D3			0x0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
+				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
+				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
+				MX27_PAD_USBH1_FS__UART4_RTS		0x0
+			>;
+		};
+
+		pinctrl_uart8250_1: uart82501grp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23		0x0
+			>;
+		};
+
+		pinctrl_uart8250_2: uart82502grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
+			>;
+		};
+
+		pinctrl_uart8250_3: uart82503grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
+			>;
+		};
+
+		pinctrl_uart8250_4: uart82504grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+	};
+};