Merge tag 'imx-dt-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo:
The imx device tree changes for 3.10:

* The huge diff stat is introduced by the pinctrl changes.  With DTC
  macro support ready, we're moving those huge mount of data about pins
  out of pinctrl driver.
* Device tree source updates for GPI, LDB, SRC, cpufreq-cpu0.
* Initial imx6dl device tree support
* Board level DTS changes for some imx27 and imx51 platforms.

* tag 'imx-dt-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (605 commits)
  ARM: dts: imx6dl-wandboard: Add USB Host support
  ARM: dts: imx51 cpu node
  ARM: dts: Add missing imx27-phytec-phycore dtb target
  ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module
  ARM: i.MX51: Add PATA support
  ARM: dts: Add initial support for Wandboard Dual-Lite
  ARM: dts: imx: add initial imx6dl-sabreauto support
  ARM: dts: imx: add initial imx6dl-sabresd support
  ARM: dts: imx: make sabreauto and sabresd common
  pinctrl: add pinctrl driver for imx6sl
  pinctrl: add pinctrl driver for imx6dl
  ARM: dts: imx53: fix SD2_DATA1 pad AUDMUX_AUD4 configuration
  ARM: dts: MicroSys sbc6x support (i.MX6)
  ARM i.MX5: Add System Reset Controller (SRC) support for i.MX51 and i.MX53
  ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree
  ARM i.MX6q: Link system reset controller (SRC) to IPU in DT
  ARM i.MX6q: Add LDB device to device tree
  ARM: imx5 DT init cpufreq-cpu0 device
  ARM: imx27 DT init cpufreq-cpu0 device
  ARM i.MX53: Add LDB device to device tree
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 87 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
new file mode 100644
index 00000000000..e21f6a89cf0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_2>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	cd-gpios = <&gpio2 2 0>;
+	wp-gpios = <&gpio2 3 0>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	cd-gpios = <&gpio2 0 0>;
+	wp-gpios = <&gpio2 1 0>;
+	status = "okay";
+};