Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits)
  ARM: DMA: add support for DMA debugging
  ARM: PL011: add DMA burst threshold support for ST variants
  ARM: PL011: Add support for transmit DMA
  ARM: PL011: Ensure IRQs are disabled in UART interrupt handler
  ARM: PL011: Separate hardware FIFO size from TTY FIFO size
  ARM: PL011: Allow better handling of vendor data
  ARM: PL011: Ensure error flags are clear at startup
  ARM: PL011: include revision number in boot-time port printk
  ARM: vexpress: add sched_clock() for Versatile Express
  ARM i.MX53: Make MX53 EVK bootable
  ARM i.MX53: Some bug fix about MX53 MSL code
  ARM: 6607/1: sa1100: Update platform device registration
  ARM: 6606/1: sa1100: Fix platform device registration
  ARM i.MX51: rename IPU irqs
  ARM i.MX51: Add ipu clock support
  ARM: imx/mx27_3ds: Add PMIC support
  ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()
  mx51: fix usb clock support
  MX51: Add support for usb host 2
  arch/arm/plat-mxc/ehci.c: fix errors/typos
  ...

1 files changed, 43 insertions, 2423 deletions

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index fdfa4976b0b..5efa2647a2f 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -4,9 +4,7 @@
  * ARM performance counter support.
  *
  * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
- *
- * ARMv7 support: Jean Pihet <jpihet@mvista.com>
- * 2010 (c) MontaVista Software, LLC.
+ * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
  *
  * This code is based on the sparc64 perf event code, which is in turn based
  * on the x86 code. Callchain code is based on the ARM OProfile backtrace
@@ -34,7 +32,7 @@ static struct platform_device *pmu_device;
  * Hardware lock to serialize accesses to PMU registers. Needed for the
  * read/modify/write sequences.
  */
-DEFINE_SPINLOCK(pmu_lock);
+static DEFINE_RAW_SPINLOCK(pmu_lock);
 
 /*
  * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
@@ -67,31 +65,25 @@ struct cpu_hw_events {
 	 */
 	unsigned long		active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
 };
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-/* PMU names. */
-static const char *arm_pmu_names[] = {
-	[ARM_PERF_PMU_ID_XSCALE1] = "xscale1",
-	[ARM_PERF_PMU_ID_XSCALE2] = "xscale2",
-	[ARM_PERF_PMU_ID_V6]	  = "v6",
-	[ARM_PERF_PMU_ID_V6MP]	  = "v6mpcore",
-	[ARM_PERF_PMU_ID_CA8]	  = "ARMv7 Cortex-A8",
-	[ARM_PERF_PMU_ID_CA9]	  = "ARMv7 Cortex-A9",
-};
+static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
 
 struct arm_pmu {
 	enum arm_perf_pmu_ids id;
+	const char	*name;
 	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
 	void		(*enable)(struct hw_perf_event *evt, int idx);
 	void		(*disable)(struct hw_perf_event *evt, int idx);
-	int		(*event_map)(int evt);
-	u64		(*raw_event)(u64);
 	int		(*get_event_idx)(struct cpu_hw_events *cpuc,
 					 struct hw_perf_event *hwc);
 	u32		(*read_counter)(int idx);
 	void		(*write_counter)(int idx, u32 val);
 	void		(*start)(void);
 	void		(*stop)(void);
+	const unsigned	(*cache_map)[PERF_COUNT_HW_CACHE_MAX]
+				    [PERF_COUNT_HW_CACHE_OP_MAX]
+				    [PERF_COUNT_HW_CACHE_RESULT_MAX];
+	const unsigned	(*event_map)[PERF_COUNT_HW_MAX];
+	u32		raw_event_mask;
 	int		num_events;
 	u64		max_period;
 };
@@ -136,10 +128,6 @@ EXPORT_SYMBOL_GPL(perf_num_counters);
 
 #define CACHE_OP_UNSUPPORTED		0xFFFF
 
-static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-				     [PERF_COUNT_HW_CACHE_OP_MAX]
-				     [PERF_COUNT_HW_CACHE_RESULT_MAX];
-
 static int
 armpmu_map_cache_event(u64 config)
 {
@@ -157,7 +145,7 @@ armpmu_map_cache_event(u64 config)
 	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
 		return -EINVAL;
 
-	ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result];
+	ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result];
 
 	if (ret == CACHE_OP_UNSUPPORTED)
 		return -ENOENT;
@@ -166,6 +154,19 @@ armpmu_map_cache_event(u64 config)
 }
 
 static int
+armpmu_map_event(u64 config)
+{
+	int mapping = (*armpmu->event_map)[config];
+	return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping;
+}
+
+static int
+armpmu_map_raw_event(u64 config)
+{
+	return (int)(config & armpmu->raw_event_mask);
+}
+
+static int
 armpmu_event_set_period(struct perf_event *event,
 			struct hw_perf_event *hwc,
 			int idx)
@@ -458,11 +459,11 @@ __hw_perf_event_init(struct perf_event *event)
 
 	/* Decode the generic type into an ARM event identifier. */
 	if (PERF_TYPE_HARDWARE == event->attr.type) {
-		mapping = armpmu->event_map(event->attr.config);
+		mapping = armpmu_map_event(event->attr.config);
 	} else if (PERF_TYPE_HW_CACHE == event->attr.type) {
 		mapping = armpmu_map_cache_event(event->attr.config);
 	} else if (PERF_TYPE_RAW == event->attr.type) {
-		mapping = armpmu->raw_event(event->attr.config);
+		mapping = armpmu_map_raw_event(event->attr.config);
 	} else {
 		pr_debug("event type %x not supported\n", event->attr.type);
 		return -EOPNOTSUPP;
@@ -603,2366 +604,10 @@ static struct pmu pmu = {
 	.read		= armpmu_read,
 };
 
-/*
- * ARMv6 Performance counter handling code.
- *
- * ARMv6 has 2 configurable performance counters and a single cycle counter.
- * They all share a single reset bit but can be written to zero so we can use
- * that for a reset.
- *
- * The counters can't be individually enabled or disabled so when we remove
- * one event and replace it with another we could get spurious counts from the
- * wrong event. However, we can take advantage of the fact that the
- * performance counters can export events to the event bus, and the event bus
- * itself can be monitored. This requires that we *don't* export the events to
- * the event bus. The procedure for disabling a configurable counter is:
- *	- change the counter to count the ETMEXTOUT[0] signal (0x20). This
- *	  effectively stops the counter from counting.
- *	- disable the counter's interrupt generation (each counter has it's
- *	  own interrupt enable bit).
- * Once stopped, the counter value can be written as 0 to reset.
- *
- * To enable a counter:
- *	- enable the counter's interrupt generation.
- *	- set the new event type.
- *
- * Note: the dedicated cycle counter only counts cycles and can't be
- * enabled/disabled independently of the others. When we want to disable the
- * cycle counter, we have to just disable the interrupt reporting and start
- * ignoring that counter. When re-enabling, we have to reset the value and
- * enable the interrupt.
- */
-
-enum armv6_perf_types {
-	ARMV6_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6_PERFCTR_ITLB_MISS		    = 0x3,
-	ARMV6_PERFCTR_DTLB_MISS		    = 0x4,
-	ARMV6_PERFCTR_BR_EXEC		    = 0x5,
-	ARMV6_PERFCTR_BR_MISPREDICT	    = 0x6,
-	ARMV6_PERFCTR_INSTR_EXEC	    = 0x7,
-	ARMV6_PERFCTR_DCACHE_HIT	    = 0x9,
-	ARMV6_PERFCTR_DCACHE_ACCESS	    = 0xA,
-	ARMV6_PERFCTR_DCACHE_MISS	    = 0xB,
-	ARMV6_PERFCTR_DCACHE_WBACK	    = 0xC,
-	ARMV6_PERFCTR_SW_PC_CHANGE	    = 0xD,
-	ARMV6_PERFCTR_MAIN_TLB_MISS	    = 0xF,
-	ARMV6_PERFCTR_EXPL_D_ACCESS	    = 0x10,
-	ARMV6_PERFCTR_LSU_FULL_STALL	    = 0x11,
-	ARMV6_PERFCTR_WBUF_DRAINED	    = 0x12,
-	ARMV6_PERFCTR_CPU_CYCLES	    = 0xFF,
-	ARMV6_PERFCTR_NOP		    = 0x20,
-};
-
-enum armv6_counters {
-	ARMV6_CYCLE_COUNTER = 1,
-	ARMV6_COUNTER0,
-	ARMV6_COUNTER1,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * The ARM performance counters can count micro DTLB misses,
-		 * micro ITLB misses and main TLB misses. There isn't an event
-		 * for TLB misses, so use the micro misses here and if users
-		 * want the main TLB misses they can use a raw counter.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-enum armv6mpcore_perf_types {
-	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
-	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
-	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
-	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
-	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
-	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
-	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
-	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
-	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
-	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
-	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
-	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
-	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  =
-				ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
-			[C(RESULT_MISS)]    =
-				ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  =
-				ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
-			[C(RESULT_MISS)]    =
-				ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * The ARM performance counters can count micro DTLB misses,
-		 * micro ITLB misses and main TLB misses. There isn't an event
-		 * for TLB misses, so use the micro misses here and if users
-		 * want the main TLB misses they can use a raw counter.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-static inline unsigned long
-armv6_pmcr_read(void)
-{
-	u32 val;
-	asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void
-armv6_pmcr_write(unsigned long val)
-{
-	asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
-}
-
-#define ARMV6_PMCR_ENABLE		(1 << 0)
-#define ARMV6_PMCR_CTR01_RESET		(1 << 1)
-#define ARMV6_PMCR_CCOUNT_RESET		(1 << 2)
-#define ARMV6_PMCR_CCOUNT_DIV		(1 << 3)
-#define ARMV6_PMCR_COUNT0_IEN		(1 << 4)
-#define ARMV6_PMCR_COUNT1_IEN		(1 << 5)
-#define ARMV6_PMCR_CCOUNT_IEN		(1 << 6)
-#define ARMV6_PMCR_COUNT0_OVERFLOW	(1 << 8)
-#define ARMV6_PMCR_COUNT1_OVERFLOW	(1 << 9)
-#define ARMV6_PMCR_CCOUNT_OVERFLOW	(1 << 10)
-#define ARMV6_PMCR_EVT_COUNT0_SHIFT	20
-#define ARMV6_PMCR_EVT_COUNT0_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
-#define ARMV6_PMCR_EVT_COUNT1_SHIFT	12
-#define ARMV6_PMCR_EVT_COUNT1_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
-
-#define ARMV6_PMCR_OVERFLOWED_MASK \
-	(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
-	 ARMV6_PMCR_CCOUNT_OVERFLOW)
-
-static inline int
-armv6_pmcr_has_overflowed(unsigned long pmcr)
-{
-	return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
-}
-
-static inline int
-armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
-				  enum armv6_counters counter)
-{
-	int ret = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
-	else if (ARMV6_COUNTER0 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
-	else if (ARMV6_COUNTER1 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return ret;
-}
-
-static inline u32
-armv6pmu_read_counter(int counter)
-{
-	unsigned long value = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return value;
-}
-
-static inline void
-armv6pmu_write_counter(int counter,
-		       u32 value)
-{
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-}
-
-void
-armv6pmu_enable_event(struct hw_perf_event *hwc,
-		      int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= 0;
-		evt	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
-			  ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
-			  ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the event
-	 * that we're interested in.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t
-armv6pmu_handle_irq(int irq_num,
-		    void *dev)
-{
-	unsigned long pmcr = armv6_pmcr_read();
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	if (!armv6_pmcr_has_overflowed(pmcr))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	/*
-	 * The interrupts are cleared by writing the overflow flags back to
-	 * the control register. All of the other bits don't have any effect
-	 * if they are rewritten, so write the whole value back.
-	 */
-	armv6_pmcr_write(pmcr);
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void
-armv6pmu_start(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val |= ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-void
-armv6pmu_stop(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline int
-armv6pmu_event_map(int config)
-{
-	int mapping = armv6_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static inline int
-armv6mpcore_pmu_event_map(int config)
-{
-	int mapping = armv6mpcore_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static u64
-armv6pmu_raw_event(u64 config)
-{
-	return config & 0xff;
-}
-
-static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
-		       struct hw_perf_event *event)
-{
-	/* Always place a cycle counter into the cycle counter. */
-	if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
-		if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV6_CYCLE_COUNTER;
-	} else {
-		/*
-		 * For anything other than a cycle counter, try and use
-		 * counter0 and counter1.
-		 */
-		if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
-			return ARMV6_COUNTER1;
-		}
-
-		if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
-			return ARMV6_COUNTER0;
-		}
-
-		/* The counters are all in use. */
-		return -EAGAIN;
-	}
-}
-
-static void
-armv6pmu_disable_event(struct hw_perf_event *hwc,
-		       int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-		evt	= 0;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the number
-	 * of ETM bus signal assertion cycles. The external reporting should
-	 * be disabled and so this should never increment.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
-			      int idx)
-{
-	unsigned long val, mask, flags, evt = 0;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
-	 * simply disable the interrupt reporting.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static const struct arm_pmu armv6pmu = {
-	.id			= ARM_PERF_PMU_ID_V6,
-	.handle_irq		= armv6pmu_handle_irq,
-	.enable			= armv6pmu_enable_event,
-	.disable		= armv6pmu_disable_event,
-	.event_map		= armv6pmu_event_map,
-	.raw_event		= armv6pmu_raw_event,
-	.read_counter		= armv6pmu_read_counter,
-	.write_counter		= armv6pmu_write_counter,
-	.get_event_idx		= armv6pmu_get_event_idx,
-	.start			= armv6pmu_start,
-	.stop			= armv6pmu_stop,
-	.num_events		= 3,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-/*
- * ARMv6mpcore is almost identical to single core ARMv6 with the exception
- * that some of the events have different enumerations and that there is no
- * *hack* to stop the programmable counters. To stop the counters we simply
- * disable the interrupt reporting and update the event. When unthrottling we
- * reset the period and enable the interrupt reporting.
- */
-static const struct arm_pmu armv6mpcore_pmu = {
-	.id			= ARM_PERF_PMU_ID_V6MP,
-	.handle_irq		= armv6pmu_handle_irq,
-	.enable			= armv6pmu_enable_event,
-	.disable		= armv6mpcore_pmu_disable_event,
-	.event_map		= armv6mpcore_pmu_event_map,
-	.raw_event		= armv6pmu_raw_event,
-	.read_counter		= armv6pmu_read_counter,
-	.write_counter		= armv6pmu_write_counter,
-	.get_event_idx		= armv6pmu_get_event_idx,
-	.start			= armv6pmu_start,
-	.stop			= armv6pmu_stop,
-	.num_events		= 3,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-/*
- * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
- *
- * Copied from ARMv6 code, with the low level code inspired
- *  by the ARMv7 Oprofile code.
- *
- * Cortex-A8 has up to 4 configurable performance counters and
- *  a single cycle counter.
- * Cortex-A9 has up to 31 configurable performance counters and
- *  a single cycle counter.
- *
- * All counters can be enabled/disabled and IRQ masked separately. The cycle
- *  counter and all 4 performance counters together can be reset separately.
- */
-
-/* Common ARMv7 event types */
-enum armv7_perf_types {
-	ARMV7_PERFCTR_PMNC_SW_INCR		= 0x00,
-	ARMV7_PERFCTR_IFETCH_MISS		= 0x01,
-	ARMV7_PERFCTR_ITLB_MISS			= 0x02,
-	ARMV7_PERFCTR_DCACHE_REFILL		= 0x03,
-	ARMV7_PERFCTR_DCACHE_ACCESS		= 0x04,
-	ARMV7_PERFCTR_DTLB_REFILL		= 0x05,
-	ARMV7_PERFCTR_DREAD			= 0x06,
-	ARMV7_PERFCTR_DWRITE			= 0x07,
-
-	ARMV7_PERFCTR_EXC_TAKEN			= 0x09,
-	ARMV7_PERFCTR_EXC_EXECUTED		= 0x0A,
-	ARMV7_PERFCTR_CID_WRITE			= 0x0B,
-	/* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
-	 * It counts:
-	 *  - all branch instructions,
-	 *  - instructions that explicitly write the PC,
-	 *  - exception generating instructions.
-	 */
-	ARMV7_PERFCTR_PC_WRITE			= 0x0C,
-	ARMV7_PERFCTR_PC_IMM_BRANCH		= 0x0D,
-	ARMV7_PERFCTR_UNALIGNED_ACCESS		= 0x0F,
-	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED	= 0x10,
-	ARMV7_PERFCTR_CLOCK_CYCLES		= 0x11,
-
-	ARMV7_PERFCTR_PC_BRANCH_MIS_USED	= 0x12,
-
-	ARMV7_PERFCTR_CPU_CYCLES		= 0xFF
-};
-
-/* ARMv7 Cortex-A8 specific event types */
-enum armv7_a8_perf_types {
-	ARMV7_PERFCTR_INSTR_EXECUTED		= 0x08,
-
-	ARMV7_PERFCTR_PC_PROC_RETURN		= 0x0E,
-
-	ARMV7_PERFCTR_WRITE_BUFFER_FULL		= 0x40,
-	ARMV7_PERFCTR_L2_STORE_MERGED		= 0x41,
-	ARMV7_PERFCTR_L2_STORE_BUFF		= 0x42,
-	ARMV7_PERFCTR_L2_ACCESS			= 0x43,
-	ARMV7_PERFCTR_L2_CACH_MISS		= 0x44,
-	ARMV7_PERFCTR_AXI_READ_CYCLES		= 0x45,
-	ARMV7_PERFCTR_AXI_WRITE_CYCLES		= 0x46,
-	ARMV7_PERFCTR_MEMORY_REPLAY		= 0x47,
-	ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY	= 0x48,
-	ARMV7_PERFCTR_L1_DATA_MISS		= 0x49,
-	ARMV7_PERFCTR_L1_INST_MISS		= 0x4A,
-	ARMV7_PERFCTR_L1_DATA_COLORING		= 0x4B,
-	ARMV7_PERFCTR_L1_NEON_DATA		= 0x4C,
-	ARMV7_PERFCTR_L1_NEON_CACH_DATA		= 0x4D,
-	ARMV7_PERFCTR_L2_NEON			= 0x4E,
-	ARMV7_PERFCTR_L2_NEON_HIT		= 0x4F,
-	ARMV7_PERFCTR_L1_INST			= 0x50,
-	ARMV7_PERFCTR_PC_RETURN_MIS_PRED	= 0x51,
-	ARMV7_PERFCTR_PC_BRANCH_FAILED		= 0x52,
-	ARMV7_PERFCTR_PC_BRANCH_TAKEN		= 0x53,
-	ARMV7_PERFCTR_PC_BRANCH_EXECUTED	= 0x54,
-	ARMV7_PERFCTR_OP_EXECUTED		= 0x55,
-	ARMV7_PERFCTR_CYCLES_INST_STALL		= 0x56,
-	ARMV7_PERFCTR_CYCLES_INST		= 0x57,
-	ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL	= 0x58,
-	ARMV7_PERFCTR_CYCLES_NEON_INST_STALL	= 0x59,
-	ARMV7_PERFCTR_NEON_CYCLES		= 0x5A,
-
-	ARMV7_PERFCTR_PMU0_EVENTS		= 0x70,
-	ARMV7_PERFCTR_PMU1_EVENTS		= 0x71,
-	ARMV7_PERFCTR_PMU_EVENTS		= 0x72,
-};
-
-/* ARMv7 Cortex-A9 specific event types */
-enum armv7_a9_perf_types {
-	ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC	= 0x40,
-	ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC	= 0x41,
-	ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC	= 0x42,
-
-	ARMV7_PERFCTR_COHERENT_LINE_MISS	= 0x50,
-	ARMV7_PERFCTR_COHERENT_LINE_HIT		= 0x51,
-
-	ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES	= 0x60,
-	ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES	= 0x61,
-	ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES	= 0x62,
-	ARMV7_PERFCTR_STREX_EXECUTED_PASSED	= 0x63,
-	ARMV7_PERFCTR_STREX_EXECUTED_FAILED	= 0x64,
-	ARMV7_PERFCTR_DATA_EVICTION		= 0x65,
-	ARMV7_PERFCTR_ISSUE_STAGE_NO_INST	= 0x66,
-	ARMV7_PERFCTR_ISSUE_STAGE_EMPTY		= 0x67,
-	ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE	= 0x68,
-
-	ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS	= 0x6E,
-
-	ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST	= 0x70,
-	ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST	= 0x71,
-	ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST	= 0x72,
-	ARMV7_PERFCTR_FP_EXECUTED_INST		= 0x73,
-	ARMV7_PERFCTR_NEON_EXECUTED_INST	= 0x74,
-
-	ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES	= 0x80,
-	ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES	= 0x81,
-	ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES	= 0x82,
-	ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES	= 0x83,
-	ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES	= 0x84,
-	ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES 	= 0x85,
-	ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES	= 0x86,
-
-	ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES	= 0x8A,
-	ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES	= 0x8B,
-
-	ARMV7_PERFCTR_ISB_INST			= 0x90,
-	ARMV7_PERFCTR_DSB_INST			= 0x91,
-	ARMV7_PERFCTR_DMB_INST			= 0x92,
-	ARMV7_PERFCTR_EXT_INTERRUPTS		= 0x93,
-
-	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED	= 0xA0,
-	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED	= 0xA1,
-	ARMV7_PERFCTR_PLE_FIFO_FLUSH		= 0xA2,
-	ARMV7_PERFCTR_PLE_RQST_COMPLETED	= 0xA3,
-	ARMV7_PERFCTR_PLE_FIFO_OVERFLOW		= 0xA4,
-	ARMV7_PERFCTR_PLE_RQST_PROG		= 0xA5
-};
-
-/*
- * Cortex-A8 HW events mapping
- *
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * Only ITLB misses and DTLB refills are supported.
-		 * If users want the DTLB refills misses a raw counter
-		 * must be used.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Cortex-A9 HW events mapping
- */
-static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    =
-					ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_COHERENT_LINE_HIT,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_COHERENT_LINE_MISS,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * Only ITLB misses and DTLB refills are supported.
-		 * If users want the DTLB refills misses a raw counter
-		 * must be used.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Perf Events counters
- */
-enum armv7_counters {
-	ARMV7_CYCLE_COUNTER 		= 1,	/* Cycle counter */
-	ARMV7_COUNTER0			= 2,	/* First event counter */
-};
-
-/*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
- */
-#define	ARMV7_COUNTER_LAST	(ARMV7_COUNTER0 + armpmu->num_events - 1)
-
-/*
- * ARMv7 low level PMNC access
- */
-
-/*
- * Per-CPU PMNC: config reg
- */
-#define ARMV7_PMNC_E		(1 << 0) /* Enable all counters */
-#define ARMV7_PMNC_P		(1 << 1) /* Reset all counters */
-#define ARMV7_PMNC_C		(1 << 2) /* Cycle counter reset */
-#define ARMV7_PMNC_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
-#define ARMV7_PMNC_X		(1 << 4) /* Export to ETM */
-#define ARMV7_PMNC_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
-#define	ARMV7_PMNC_N_SHIFT	11	 /* Number of counters supported */
-#define	ARMV7_PMNC_N_MASK	0x1f
-#define	ARMV7_PMNC_MASK		0x3f	 /* Mask for writable bits */
-
-/*
- * Available counters
- */
-#define ARMV7_CNT0 		0	/* First event counter */
-#define ARMV7_CCNT 		31	/* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx	(ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C		(1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C		(1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C		(1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C		(1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
- */
-#define	ARMV7_EVTSEL_MASK	0xff		/* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define	ARMV7_SELECT_MASK	0x1f		/* Mask for writable bits */
-
-/*
- * FLAG: counters overflow flag status reg
- */
-#define ARMV7_FLAG_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C		(1 << ARMV7_CCNT)
-#define	ARMV7_FLAG_MASK		0xffffffff	/* Mask for writable bits */
-#define	ARMV7_OVERFLOWED_MASK	ARMV7_FLAG_MASK
-
-static inline unsigned long armv7_pmnc_read(void)
-{
-	u32 val;
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void armv7_pmnc_write(unsigned long val)
-{
-	val &= ARMV7_PMNC_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
-}
-
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
-{
-	return pmnc & ARMV7_OVERFLOWED_MASK;
-}
-
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
-					enum armv7_counters counter)
-{
-	int ret = 0;
-
-	if (counter == ARMV7_CYCLE_COUNTER)
-		ret = pmnc & ARMV7_FLAG_C;
-	else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
-		ret = pmnc & ARMV7_FLAG_P(counter);
-	else
-		pr_err("CPU%u checking wrong counter %d overflow status\n",
-			smp_processor_id(), counter);
-
-	return ret;
-}
-
-static inline int armv7_pmnc_select_counter(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
-		pr_err("CPU%u selecting wrong PMNC counter"
-			" %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7pmu_read_counter(int idx)
-{
-	unsigned long value = 0;
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
-	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
-		if (armv7_pmnc_select_counter(idx) == idx)
-			asm volatile("mrc p15, 0, %0, c9, c13, 2"
-				     : "=r" (value));
-	} else
-		pr_err("CPU%u reading wrong counter %d\n",
-			smp_processor_id(), idx);
-
-	return value;
-}
-
-static inline void armv7pmu_write_counter(int idx, u32 value)
-{
-	if (idx == ARMV7_CYCLE_COUNTER)
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
-	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
-		if (armv7_pmnc_select_counter(idx) == idx)
-			asm volatile("mcr p15, 0, %0, c9, c13, 2"
-				     : : "r" (value));
-	} else
-		pr_err("CPU%u writing wrong counter %d\n",
-			smp_processor_id(), idx);
-}
-
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
-{
-	if (armv7_pmnc_select_counter(idx) == idx) {
-		val &= ARMV7_EVTSEL_MASK;
-		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
-	}
-}
-
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u enabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_CNTENS_C;
-	else
-		val = ARMV7_CNTENS_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
-{
-	u32 val;
-
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u disabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_CNTENC_C;
-	else
-		val = ARMV7_CNTENC_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u enabling wrong PMNC counter"
-			" interrupt enable %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_INTENS_C;
-	else
-		val = ARMV7_INTENS_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u disabling wrong PMNC counter"
-			" interrupt enable %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_INTENC_C;
-	else
-		val = ARMV7_INTENC_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_getreset_flags(void)
-{
-	u32 val;
-
-	/* Read */
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-
-	/* Write to clear flags */
-	val &= ARMV7_FLAG_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-
-	return val;
-}
-
-#ifdef DEBUG
-static void armv7_pmnc_dump_regs(void)
-{
-	u32 val;
-	unsigned int cnt;
-
-	printk(KERN_INFO "PMNC registers dump:\n");
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-	printk(KERN_INFO "PMNC  =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
-	printk(KERN_INFO "CNTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
-	printk(KERN_INFO "INTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-	printk(KERN_INFO "FLAGS =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
-	printk(KERN_INFO "SELECT=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
-	printk(KERN_INFO "CCNT  =0x%08x\n", val);
-
-	for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
-		armv7_pmnc_select_counter(cnt);
-		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] count =0x%08x\n",
-			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
-		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
-			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
-	}
-}
-#endif
-
-void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags;
-
-	/*
-	 * Enable counter and interrupt, and set the counter to count
-	 * the event that we're interested in.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Set event (if destined for PMNx counters)
-	 * We don't need to set the event if it's a cycle count
-	 */
-	if (idx != ARMV7_CYCLE_COUNTER)
-		armv7_pmnc_write_evtsel(idx, hwc->config_base);
-
-	/*
-	 * Enable interrupt for this counter
-	 */
-	armv7_pmnc_enable_intens(idx);
-
-	/*
-	 * Enable counter
-	 */
-	armv7_pmnc_enable_counter(idx);
-
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags;
-
-	/*
-	 * Disable counter and interrupt
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Disable interrupt for this counter
-	 */
-	armv7_pmnc_disable_intens(idx);
-
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc;
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * Get and reset the IRQ flags
-	 */
-	pmnc = armv7_pmnc_getreset_flags();
-
-	/*
-	 * Did an overflow occur?
-	 */
-	if (!armv7_pmnc_has_overflowed(pmnc))
-		return IRQ_NONE;
-
-	/*
-	 * Handle the counter(s) overflow(s)
-	 */
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void armv7pmu_start(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	/* Enable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_stop(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	/* Disable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline int armv7_a8_pmu_event_map(int config)
-{
-	int mapping = armv7_a8_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static inline int armv7_a9_pmu_event_map(int config)
-{
-	int mapping = armv7_a9_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static u64 armv7pmu_raw_event(u64 config)
-{
-	return config & 0xff;
-}
-
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
-				  struct hw_perf_event *event)
-{
-	int idx;
-
-	/* Always place a cycle counter into the cycle counter. */
-	if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
-		if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV7_CYCLE_COUNTER;
-	} else {
-		/*
-		 * For anything other than a cycle counter, try and use
-		 * the events counters
-		 */
-		for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
-			if (!test_and_set_bit(idx, cpuc->used_mask))
-				return idx;
-		}
-
-		/* The counters are all in use. */
-		return -EAGAIN;
-	}
-}
-
-static struct arm_pmu armv7pmu = {
-	.handle_irq		= armv7pmu_handle_irq,
-	.enable			= armv7pmu_enable_event,
-	.disable		= armv7pmu_disable_event,
-	.raw_event		= armv7pmu_raw_event,
-	.read_counter		= armv7pmu_read_counter,
-	.write_counter		= armv7pmu_write_counter,
-	.get_event_idx		= armv7pmu_get_event_idx,
-	.start			= armv7pmu_start,
-	.stop			= armv7pmu_stop,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-static u32 __init armv7_reset_read_pmnc(void)
-{
-	u32 nb_cnt;
-
-	/* Initialize & Reset PMNC: C and P bits */
-	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-
-	/* Read the nb of CNTx counters supported from PMNC */
-	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
-
-	/* Add the CPU cycles counter and return */
-	return nb_cnt + 1;
-}
-
-/*
- * ARMv5 [xscale] Performance counter handling code.
- *
- * Based on xscale OProfile code.
- *
- * There are two variants of the xscale PMU that we support:
- * 	- xscale1pmu: 2 event counters and a cycle counter
- * 	- xscale2pmu: 4 event counters and a cycle counter
- * The two variants share event definitions, but have different
- * PMU structures.
- */
-
-enum xscale_perf_types {
-	XSCALE_PERFCTR_ICACHE_MISS		= 0x00,
-	XSCALE_PERFCTR_ICACHE_NO_DELIVER	= 0x01,
-	XSCALE_PERFCTR_DATA_STALL		= 0x02,
-	XSCALE_PERFCTR_ITLB_MISS		= 0x03,
-	XSCALE_PERFCTR_DTLB_MISS		= 0x04,
-	XSCALE_PERFCTR_BRANCH			= 0x05,
-	XSCALE_PERFCTR_BRANCH_MISS		= 0x06,
-	XSCALE_PERFCTR_INSTRUCTION		= 0x07,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL	= 0x08,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG	= 0x09,
-	XSCALE_PERFCTR_DCACHE_ACCESS		= 0x0A,
-	XSCALE_PERFCTR_DCACHE_MISS		= 0x0B,
-	XSCALE_PERFCTR_DCACHE_WRITE_BACK	= 0x0C,
-	XSCALE_PERFCTR_PC_CHANGED		= 0x0D,
-	XSCALE_PERFCTR_BCU_REQUEST		= 0x10,
-	XSCALE_PERFCTR_BCU_FULL			= 0x11,
-	XSCALE_PERFCTR_BCU_DRAIN		= 0x12,
-	XSCALE_PERFCTR_BCU_ECC_NO_ELOG		= 0x14,
-	XSCALE_PERFCTR_BCU_1_BIT_ERR		= 0x15,
-	XSCALE_PERFCTR_RMW			= 0x16,
-	/* XSCALE_PERFCTR_CCNT is not hardware defined */
-	XSCALE_PERFCTR_CCNT			= 0xFE,
-	XSCALE_PERFCTR_UNUSED			= 0xFF,
-};
-
-enum xscale_counters {
-	XSCALE_CYCLE_COUNTER	= 1,
-	XSCALE_COUNTER0,
-	XSCALE_COUNTER1,
-	XSCALE_COUNTER2,
-	XSCALE_COUNTER3,
-};
-
-static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = XSCALE_PERFCTR_CCNT,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = XSCALE_PERFCTR_INSTRUCTION,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = XSCALE_PERFCTR_BRANCH_MISS,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					   [PERF_COUNT_HW_CACHE_OP_MAX]
-					   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-#define	XSCALE_PMU_ENABLE	0x001
-#define XSCALE_PMN_RESET	0x002
-#define	XSCALE_CCNT_RESET	0x004
-#define	XSCALE_PMU_RESET	(CCNT_RESET | PMN_RESET)
-#define XSCALE_PMU_CNT64	0x008
-
-static inline int
-xscalepmu_event_map(int config)
-{
-	int mapping = xscale_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static u64
-xscalepmu_raw_event(u64 config)
-{
-	return config & 0xff;
-}
-
-#define XSCALE1_OVERFLOWED_MASK	0x700
-#define XSCALE1_CCOUNT_OVERFLOW	0x400
-#define XSCALE1_COUNT0_OVERFLOW	0x100
-#define XSCALE1_COUNT1_OVERFLOW	0x200
-#define XSCALE1_CCOUNT_INT_EN	0x040
-#define XSCALE1_COUNT0_INT_EN	0x010
-#define XSCALE1_COUNT1_INT_EN	0x020
-#define XSCALE1_COUNT0_EVT_SHFT	12
-#define XSCALE1_COUNT0_EVT_MASK	(0xff << XSCALE1_COUNT0_EVT_SHFT)
-#define XSCALE1_COUNT1_EVT_SHFT	20
-#define XSCALE1_COUNT1_EVT_MASK	(0xff << XSCALE1_COUNT1_EVT_SHFT)
-
-static inline u32
-xscale1pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale1pmu_write_pmnc(u32 val)
-{
-	/* upper 4bits and 7, 11 are write-as-0 */
-	val &= 0xffff77f;
-	asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static inline int
-xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale1pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc;
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * NOTE: there's an A stepping erratum that states if an overflow
-	 *       bit already exists and another occurs, the previous
-	 *       Overflow bit gets cleared. There's no workaround.
-	 *	 Fixed in B stepping or later.
-	 */
-	pmnc = xscale1pmu_read_pmnc();
-
-	/*
-	 * Write the value back to clear the overflow flags. Overflow
-	 * flags remain in pmnc for use below. We also disable the PMU
-	 * while we process the interrupt.
-	 */
-	xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void
-xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = 0;
-		evt = XSCALE1_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
-			XSCALE1_COUNT0_INT_EN;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
-			XSCALE1_COUNT1_INT_EN;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = XSCALE1_CCOUNT_INT_EN;
-		evt = 0;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
-			struct hw_perf_event *event)
-{
-	if (XSCALE_PERFCTR_CCNT == event->config_base) {
-		if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return XSCALE_CYCLE_COUNTER;
-	} else {
-		if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) {
-			return XSCALE_COUNTER1;
-		}
-
-		if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) {
-			return XSCALE_COUNTER0;
-		}
-
-		return -EAGAIN;
-	}
-}
-
-static void
-xscale1pmu_start(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val |= XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_stop(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale1pmu_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void
-xscale1pmu_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
-		break;
-	}
-}
-
-static const struct arm_pmu xscale1pmu = {
-	.id		= ARM_PERF_PMU_ID_XSCALE1,
-	.handle_irq	= xscale1pmu_handle_irq,
-	.enable		= xscale1pmu_enable_event,
-	.disable	= xscale1pmu_disable_event,
-	.event_map	= xscalepmu_event_map,
-	.raw_event	= xscalepmu_raw_event,
-	.read_counter	= xscale1pmu_read_counter,
-	.write_counter	= xscale1pmu_write_counter,
-	.get_event_idx	= xscale1pmu_get_event_idx,
-	.start		= xscale1pmu_start,
-	.stop		= xscale1pmu_stop,
-	.num_events	= 3,
-	.max_period	= (1LLU << 32) - 1,
-};
-
-#define XSCALE2_OVERFLOWED_MASK	0x01f
-#define XSCALE2_CCOUNT_OVERFLOW	0x001
-#define XSCALE2_COUNT0_OVERFLOW	0x002
-#define XSCALE2_COUNT1_OVERFLOW	0x004
-#define XSCALE2_COUNT2_OVERFLOW	0x008
-#define XSCALE2_COUNT3_OVERFLOW	0x010
-#define XSCALE2_CCOUNT_INT_EN	0x001
-#define XSCALE2_COUNT0_INT_EN	0x002
-#define XSCALE2_COUNT1_INT_EN	0x004
-#define XSCALE2_COUNT2_INT_EN	0x008
-#define XSCALE2_COUNT3_INT_EN	0x010
-#define XSCALE2_COUNT0_EVT_SHFT	0
-#define XSCALE2_COUNT0_EVT_MASK	(0xff << XSCALE2_COUNT0_EVT_SHFT)
-#define XSCALE2_COUNT1_EVT_SHFT	8
-#define XSCALE2_COUNT1_EVT_MASK	(0xff << XSCALE2_COUNT1_EVT_SHFT)
-#define XSCALE2_COUNT2_EVT_SHFT	16
-#define XSCALE2_COUNT2_EVT_MASK	(0xff << XSCALE2_COUNT2_EVT_SHFT)
-#define XSCALE2_COUNT3_EVT_SHFT	24
-#define XSCALE2_COUNT3_EVT_MASK	(0xff << XSCALE2_COUNT3_EVT_SHFT)
-
-static inline u32
-xscale2pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
-	/* bits 1-2 and 4-23 are read-unpredictable */
-	return val & 0xff000009;
-}
-
-static inline void
-xscale2pmu_write_pmnc(u32 val)
-{
-	/* bits 4-23 are write-as-0, 24-31 are write ignored */
-	val &= 0xf;
-	asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_overflow_flags(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_overflow_flags(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_event_select(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_event_select(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
-}
-
-static inline u32
-xscale2pmu_read_int_enable(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
-	return val;
-}
-
-static void
-xscale2pmu_write_int_enable(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline int
-xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
-		break;
-	case XSCALE_COUNTER2:
-		ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
-		break;
-	case XSCALE_COUNTER3:
-		ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale2pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc, of_flags;
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/* Disable the PMU. */
-	pmnc = xscale2pmu_read_pmnc();
-	xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	/* Check the overflow flag register. */
-	of_flags = xscale2pmu_read_overflow_flags();
-	if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	/* Clear the overflow bits. */
-	xscale2pmu_write_overflow_flags(of_flags);
-
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void
-xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags, ien, evtsel;
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien |= XSCALE2_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		ien |= XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		ien |= XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER2:
-		ien |= XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER3:
-		ien |= XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags, ien, evtsel;
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien &= ~XSCALE2_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		ien &= ~XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		ien &= ~XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER2:
-		ien &= ~XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER3:
-		ien &= ~XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
-			struct hw_perf_event *event)
-{
-	int idx = xscale1pmu_get_event_idx(cpuc, event);
-	if (idx >= 0)
-		goto out;
-
-	if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
-		idx = XSCALE_COUNTER3;
-	else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
-		idx = XSCALE_COUNTER2;
-out:
-	return idx;
-}
-
-static void
-xscale2pmu_start(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
-	val |= XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_stop(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale2pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale2pmu_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void
-xscale2pmu_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
-		break;
-	}
-}
-
-static const struct arm_pmu xscale2pmu = {
-	.id		= ARM_PERF_PMU_ID_XSCALE2,
-	.handle_irq	= xscale2pmu_handle_irq,
-	.enable		= xscale2pmu_enable_event,
-	.disable	= xscale2pmu_disable_event,
-	.event_map	= xscalepmu_event_map,
-	.raw_event	= xscalepmu_raw_event,
-	.read_counter	= xscale2pmu_read_counter,
-	.write_counter	= xscale2pmu_write_counter,
-	.get_event_idx	= xscale2pmu_get_event_idx,
-	.start		= xscale2pmu_start,
-	.stop		= xscale2pmu_stop,
-	.num_events	= 5,
-	.max_period	= (1LLU << 32) - 1,
-};
+/* Include the PMU-specific implementations. */
+#include "perf_event_xscale.c"
+#include "perf_event_v6.c"
+#include "perf_event_v7.c"
 
 static int __init
 init_hw_perf_events(void)
@@ -2977,37 +622,16 @@ init_hw_perf_events(void)
 		case 0xB360:	/* ARM1136 */
 		case 0xB560:	/* ARM1156 */
 		case 0xB760:	/* ARM1176 */
-			armpmu = &armv6pmu;
-			memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
-					sizeof(armv6_perf_cache_map));
+			armpmu = armv6pmu_init();
 			break;
 		case 0xB020:	/* ARM11mpcore */
-			armpmu = &armv6mpcore_pmu;
-			memcpy(armpmu_perf_cache_map,
-			       armv6mpcore_perf_cache_map,
-			       sizeof(armv6mpcore_perf_cache_map));
+			armpmu = armv6mpcore_pmu_init();
 			break;
 		case 0xC080:	/* Cortex-A8 */
-			armv7pmu.id = ARM_PERF_PMU_ID_CA8;
-			memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
-				sizeof(armv7_a8_perf_cache_map));
-			armv7pmu.event_map = armv7_a8_pmu_event_map;
-			armpmu = &armv7pmu;
-
-			/* Reset PMNC and read the nb of CNTx counters
-			    supported */
-			armv7pmu.num_events = armv7_reset_read_pmnc();
+			armpmu = armv7_a8_pmu_init();
 			break;
 		case 0xC090:	/* Cortex-A9 */
-			armv7pmu.id = ARM_PERF_PMU_ID_CA9;
-			memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
-				sizeof(armv7_a9_perf_cache_map));
-			armv7pmu.event_map = armv7_a9_pmu_event_map;
-			armpmu = &armv7pmu;
-
-			/* Reset PMNC and read the nb of CNTx counters
-			    supported */
-			armv7pmu.num_events = armv7_reset_read_pmnc();
+			armpmu = armv7_a9_pmu_init();
 			break;
 		}
 	/* Intel CPUs [xscale]. */
@@ -3015,21 +639,17 @@ init_hw_perf_events(void)
 		part_number = (cpuid >> 13) & 0x7;
 		switch (part_number) {
 		case 1:
-			armpmu = &xscale1pmu;
-			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
-					sizeof(xscale_perf_cache_map));
+			armpmu = xscale1pmu_init();
 			break;
 		case 2:
-			armpmu = &xscale2pmu;
-			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
-					sizeof(xscale_perf_cache_map));
+			armpmu = xscale2pmu_init();
 			break;
 		}
 	}
 
 	if (armpmu) {
 		pr_info("enabled with %s PMU driver, %d counters available\n",
-				arm_pmu_names[armpmu->id], armpmu->num_events);
+			armpmu->name, armpmu->num_events);
 	} else {
 		pr_info("no hardware support available\n");
 	}
@@ -3053,17 +673,17 @@ early_initcall(init_hw_perf_events);
  * This code has been adapted from the ARM OProfile support.
  */
 struct frame_tail {
-	struct frame_tail   *fp;
-	unsigned long	    sp;
-	unsigned long	    lr;
+	struct frame_tail __user *fp;
+	unsigned long sp;
+	unsigned long lr;
 } __attribute__((packed));
 
 /*
  * Get the return address for a single stackframe and return a pointer to the
  * next frame tail.
  */
-static struct frame_tail *
-user_backtrace(struct frame_tail *tail,
+static struct frame_tail __user *
+user_backtrace(struct frame_tail __user *tail,
 	       struct perf_callchain_entry *entry)
 {
 	struct frame_tail buftail;
@@ -3089,10 +709,10 @@ user_backtrace(struct frame_tail *tail,
 void
 perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 {
-	struct frame_tail *tail;
+	struct frame_tail __user *tail;
 
 
-	tail = (struct frame_tail *)regs->ARM_fp - 1;
+	tail = (struct frame_tail __user *)regs->ARM_fp - 1;
 
 	while (tail && !((unsigned long)tail & 0x3))
 		tail = user_backtrace(tail, entry);