Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
 "Nothing exciting this time, odd fixes in a bunch of drivers"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: at_hdmac: take maxburst from slave configuration
  dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant
  dmaengine: at_hdmac: remove some at_dma_slave comments
  dma: imx-sdma: make channel0 operations atomic
  dmaengine: Fixup dmaengine_prep_slave_single() to be actually useful
  dmaengine: Use dma_sg_len(sg) instead of sg->length
  dmaengine: Use sg_dma_address instead of sg_phys
  DMA: PL330: Remove duplicate header file inclusion
  dma: imx-sdma: keep the callbacks invoked in the tasklet
  dmaengine: dw_dma: add Device Tree probing capability
  dmaengine: dw_dmac: Add clk_{un}prepare() support
  dma/amba-pl08x: add support for the Nomadik variant
  dma/amba-pl08x: check for terminal count status only

2 files changed, 0 insertions, 27 deletions

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index f6747246d64..933fc9afe7d 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -436,7 +436,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 	atslave->dma_dev = &at_hdmac_device.dev;
 	atslave->cfg = ATC_FIFOCFG_HALFFIFO
 			| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
-	atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
 	if (mmc_id == 0)	/* MCI0 */
 		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
 			      | ATC_DST_PER(AT_DMA_ID_MCI0);
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
index fff48d1a0f4..cab0997be3d 100644
--- a/arch/arm/mach-at91/include/mach/at_hdmac.h
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -26,18 +26,11 @@ struct at_dma_platform_data {
 /**
  * struct at_dma_slave - Controller-specific information about a slave
  * @dma_dev: required DMA master device
- * @tx_reg: physical address of data register used for
- *	memory-to-peripheral transfers
- * @rx_reg: physical address of data register used for
- *	peripheral-to-memory transfers
- * @reg_width: peripheral register width
  * @cfg: Platform-specific initializer for the CFG register
- * @ctrla: Platform-specific initializer for the CTRLA register
  */
 struct at_dma_slave {
 	struct device		*dma_dev;
 	u32			cfg;
-	u32			ctrla;
 };
 
 
@@ -64,24 +57,5 @@ struct at_dma_slave {
 #define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
 #define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
 
-/* Platform-configurable bits in CTRLA */
-#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
-#define		ATC_SCSIZE_1		(0x0 << 16)
-#define		ATC_SCSIZE_4		(0x1 << 16)
-#define		ATC_SCSIZE_8		(0x2 << 16)
-#define		ATC_SCSIZE_16		(0x3 << 16)
-#define		ATC_SCSIZE_32		(0x4 << 16)
-#define		ATC_SCSIZE_64		(0x5 << 16)
-#define		ATC_SCSIZE_128		(0x6 << 16)
-#define		ATC_SCSIZE_256		(0x7 << 16)
-#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
-#define		ATC_DCSIZE_1		(0x0 << 20)
-#define		ATC_DCSIZE_4		(0x1 << 20)
-#define		ATC_DCSIZE_8		(0x2 << 20)
-#define		ATC_DCSIZE_16		(0x3 << 20)
-#define		ATC_DCSIZE_32		(0x4 << 20)
-#define		ATC_DCSIZE_64		(0x5 << 20)
-#define		ATC_DCSIZE_128		(0x6 << 20)
-#define		ATC_DCSIZE_256		(0x7 << 20)
 
 #endif /* AT_HDMAC_H */