Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

1 files changed, 0 insertions, 1159 deletions

diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
deleted file mode 100644
index 74ddb2b5561..00000000000
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ /dev/null
@@ -1,1159 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mfd/max8998.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/max8952.h>
-#include <linux/mmc/host.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/mcs.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mipi-csis.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <drm/exynos_drm.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <plat/regs-serial.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/fb.h>
-#include <plat/mfc.h>
-#include <plat/sdhci.h>
-#include <plat/fimc-core.h>
-#include <plat/camport.h>
-
-#include <mach/map.h>
-
-#include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
-#include <media/m5mols.h>
-#include <media/s5k6aa.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define UNIVERSAL_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define UNIVERSAL_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG256 |	\
-				 S5PV210_UFCON_RXTRIG256)
-
-static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-};
-
-static struct regulator_consumer_supply max8952_consumer =
-	REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_init_data universal_max8952_reg_data = {
-	.constraints	= {
-		.name		= "VARM_1.2V",
-		.min_uV		= 770000,
-		.max_uV		= 1400000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.always_on	= 1,
-		.boot_on	= 1,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8952_consumer,
-};
-
-static struct max8952_platform_data universal_max8952_pdata __initdata = {
-	.gpio_vid0	= EXYNOS4_GPX0(3),
-	.gpio_vid1	= EXYNOS4_GPX0(4),
-	.gpio_en	= -1, /* Not controllable, set "Always High" */
-	.default_mode	= 0, /* vid0 = 0, vid1 = 0 */
-	.dvs_mode	= { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
-	.sync_freq	= 0, /* default: fastest */
-	.ramp_speed	= 0, /* default: fastest */
-	.reg_data	= &universal_max8952_reg_data,
-};
-
-static struct regulator_consumer_supply lp3974_buck1_consumer =
-	REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply lp3974_buck2_consumer =
-	REGULATOR_SUPPLY("vddg3d", NULL);
-
-static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
-	REGULATOR_SUPPLY("vdet", "s5p-sdo"),
-	REGULATOR_SUPPLY("vdd_reg", "0-003c"),
-};
-
-static struct regulator_init_data lp3974_buck1_data = {
-	.constraints	= {
-		.name		= "VINT_1.1V",
-		.min_uV		= 750000,
-		.max_uV		= 1500000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &lp3974_buck1_consumer,
-};
-
-static struct regulator_init_data lp3974_buck2_data = {
-	.constraints	= {
-		.name		= "VG3D_1.1V",
-		.min_uV		= 750000,
-		.max_uV		= 1500000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &lp3974_buck2_consumer,
-};
-
-static struct regulator_init_data lp3974_buck3_data = {
-	.constraints	= {
-		.name		= "VCC_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
-	.consumer_supplies = lp3974_buck3_consumer,
-};
-
-static struct regulator_init_data lp3974_buck4_data = {
-	.constraints	= {
-		.name		= "VMEM_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_ldo2_data = {
-	.constraints	= {
-		.name		= "VALIVE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
-	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
-	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
-	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
-	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo3_data = {
-	.constraints	= {
-		.name		= "VUSB+MIPI_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
-	.consumer_supplies = lp3974_ldo3_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
-	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
-};
-
-static struct regulator_init_data lp3974_ldo4_data = {
-	.constraints	= {
-		.name		= "VADC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
-	.consumer_supplies = lp3974_ldo4_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo5_data = {
-	.constraints	= {
-		.name		= "VTF_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_ldo6_data = {
-	.constraints	= {
-		.name		= "LDO6",
-		.min_uV		= 2000000,
-		.max_uV		= 2000000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
-	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo7_data = {
-	.constraints	= {
-		.name		= "VLCD+VMIPI_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo7_consumer),
-	.consumer_supplies	= lp3974_ldo7_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
-	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
-	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
-};
-
-static struct regulator_init_data lp3974_ldo8_data = {
-	.constraints	= {
-		.name		= "VUSB+VDAC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
-	.consumer_supplies = lp3974_ldo8_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo9_consumer =
-	REGULATOR_SUPPLY("vddio", "0-003c");
-
-static struct regulator_init_data lp3974_ldo9_data = {
-	.constraints	= {
-		.name		= "VCC_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo9_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo10_data = {
-	.constraints	= {
-		.name		= "VPLL_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.boot_on	= 1,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo11_consumer =
-	REGULATOR_SUPPLY("dig_28", "0-001f");
-
-static struct regulator_init_data lp3974_ldo11_data = {
-	.constraints	= {
-		.name		= "CAM_AF_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo11_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo12_data = {
-	.constraints	= {
-		.name		= "PS_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_ldo13_data = {
-	.constraints	= {
-		.name		= "VHIC_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo14_consumer =
-	REGULATOR_SUPPLY("dig_18", "0-001f");
-
-static struct regulator_init_data lp3974_ldo14_data = {
-	.constraints	= {
-		.name		= "CAM_I_HOST_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo14_consumer,
-};
-
-
-static struct regulator_consumer_supply lp3974_ldo15_consumer =
-	REGULATOR_SUPPLY("dig_12", "0-001f");
-
-static struct regulator_init_data lp3974_ldo15_data = {
-	.constraints	= {
-		.name		= "CAM_S_DIG+FM33_CORE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo15_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
-	REGULATOR_SUPPLY("vdda", "0-003c"),
-	REGULATOR_SUPPLY("a_sensor", "0-001f"),
-};
-
-static struct regulator_init_data lp3974_ldo16_data = {
-	.constraints	= {
-		.name		= "CAM_S_ANA_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo16_consumer),
-	.consumer_supplies	= lp3974_ldo16_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo17_data = {
-	.constraints	= {
-		.name		= "VCC_3.0V_LCD",
-		.min_uV		= 3000000,
-		.max_uV		= 3000000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_32khz_ap_data = {
-	.constraints	= {
-		.name		= "32KHz AP",
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_32khz_cp_data = {
-	.constraints	= {
-		.name		= "32KHz CP",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_vichg_data = {
-	.constraints	= {
-		.name		= "VICHG",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_esafeout1_data = {
-	.constraints	= {
-		.name		= "SAFEOUT1",
-		.min_uV		= 4800000,
-		.max_uV		= 4800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_esafeout2_data = {
-	.constraints	= {
-		.name		= "SAFEOUT2",
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct max8998_regulator_data lp3974_regulators[] = {
-	{ MAX8998_LDO2,  &lp3974_ldo2_data },
-	{ MAX8998_LDO3,  &lp3974_ldo3_data },
-	{ MAX8998_LDO4,  &lp3974_ldo4_data },
-	{ MAX8998_LDO5,  &lp3974_ldo5_data },
-	{ MAX8998_LDO6,  &lp3974_ldo6_data },
-	{ MAX8998_LDO7,  &lp3974_ldo7_data },
-	{ MAX8998_LDO8,  &lp3974_ldo8_data },
-	{ MAX8998_LDO9,  &lp3974_ldo9_data },
-	{ MAX8998_LDO10, &lp3974_ldo10_data },
-	{ MAX8998_LDO11, &lp3974_ldo11_data },
-	{ MAX8998_LDO12, &lp3974_ldo12_data },
-	{ MAX8998_LDO13, &lp3974_ldo13_data },
-	{ MAX8998_LDO14, &lp3974_ldo14_data },
-	{ MAX8998_LDO15, &lp3974_ldo15_data },
-	{ MAX8998_LDO16, &lp3974_ldo16_data },
-	{ MAX8998_LDO17, &lp3974_ldo17_data },
-	{ MAX8998_BUCK1, &lp3974_buck1_data },
-	{ MAX8998_BUCK2, &lp3974_buck2_data },
-	{ MAX8998_BUCK3, &lp3974_buck3_data },
-	{ MAX8998_BUCK4, &lp3974_buck4_data },
-	{ MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
-	{ MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
-	{ MAX8998_ENVICHG, &lp3974_vichg_data },
-	{ MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
-	{ MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
-};
-
-static struct max8998_platform_data universal_lp3974_pdata = {
-	.num_regulators		= ARRAY_SIZE(lp3974_regulators),
-	.regulators		= lp3974_regulators,
-	.buck1_voltage1		= 1100000,	/* INT */
-	.buck1_voltage2		= 1000000,
-	.buck1_voltage3		= 1100000,
-	.buck1_voltage4		= 1000000,
-	.buck1_set1		= EXYNOS4_GPX0(5),
-	.buck1_set2		= EXYNOS4_GPX0(6),
-	.buck2_voltage1		= 1200000,	/* G3D */
-	.buck2_voltage2		= 1100000,
-	.buck1_default_idx	= 0,
-	.buck2_set3		= EXYNOS4_GPE2(0),
-	.buck2_default_idx	= 0,
-	.wakeup			= true,
-};
-
-
-enum fixed_regulator_id {
-	FIXED_REG_ID_MMC0,
-	FIXED_REG_ID_HDMI_5V,
-	FIXED_REG_ID_CAM_S_IF,
-	FIXED_REG_ID_CAM_I_CORE,
-	FIXED_REG_ID_CAM_VT_DIO,
-};
-
-static struct regulator_consumer_supply hdmi_fixed_consumer =
-	REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
-
-static struct regulator_init_data hdmi_fixed_voltage_init_data = {
-	.constraints		= {
-		.name		= "HDMI_5V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &hdmi_fixed_consumer,
-};
-
-static struct fixed_voltage_config hdmi_fixed_voltage_config = {
-	.supply_name		= "HDMI_EN1",
-	.microvolts		= 5000000,
-	.gpio			= EXYNOS4_GPE0(1),
-	.enable_high		= true,
-	.init_data		= &hdmi_fixed_voltage_init_data,
-};
-
-static struct platform_device hdmi_fixed_voltage = {
-	.name			= "reg-fixed-voltage",
-	.id			= FIXED_REG_ID_HDMI_5V,
-	.dev			= {
-		.platform_data	= &hdmi_fixed_voltage_config,
-	},
-};
-
-/* GPIO I2C 5 (PMIC) */
-static struct i2c_board_info i2c5_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("max8952", 0xC0 >> 1),
-		.platform_data	= &universal_max8952_pdata,
-	}, {
-		I2C_BOARD_INFO("lp3974", 0xCC >> 1),
-		.platform_data	= &universal_lp3974_pdata,
-	},
-};
-
-/* I2C3 (TSP) */
-static struct mxt_platform_data qt602240_platform_data = {
-	.x_line		= 19,
-	.y_line		= 11,
-	.x_size		= 800,
-	.y_size		= 480,
-	.blen		= 0x11,
-	.threshold	= 0x28,
-	.voltage	= 2800000,		/* 2.8V */
-	.orient		= MXT_DIAGONAL,
-	.irqflags	= IRQF_TRIGGER_FALLING,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("qt602240_ts", 0x4a),
-		.platform_data = &qt602240_platform_data,
-	},
-};
-
-static void __init universal_tsp_init(void)
-{
-	int gpio;
-
-	/* TSP_LDO_ON: XMDMADDR_11 */
-	gpio = EXYNOS4_GPE2(3);
-	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
-	gpio_export(gpio, 0);
-
-	/* TSP_INT: XMDMADDR_7 */
-	gpio = EXYNOS4_GPE1(7);
-	gpio_request(gpio, "TSP_INT");
-
-	s5p_register_gpio_interrupt(gpio);
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-	i2c3_devs[0].irq = gpio_to_irq(gpio);
-}
-
-
-/* GPIO I2C 12 (3 Touchkey) */
-static uint32_t touchkey_keymap[] = {
-	/* MCS_KEY_MAP(value, keycode) */
-	MCS_KEY_MAP(0, KEY_MENU),		/* KEY_SEND */
-	MCS_KEY_MAP(1, KEY_BACK),		/* KEY_END */
-};
-
-static struct mcs_platform_data touchkey_data = {
-	.keymap		= touchkey_keymap,
-	.keymap_size	= ARRAY_SIZE(touchkey_keymap),
-	.key_maxval	= 2,
-};
-
-/* GPIO I2C 3_TOUCH 2.8V */
-#define I2C_GPIO_BUS_12		12
-static struct i2c_gpio_platform_data i2c_gpio12_data = {
-	.sda_pin	= EXYNOS4_GPE4(0),	/* XMDMDATA_8 */
-	.scl_pin	= EXYNOS4_GPE4(1),	/* XMDMDATA_9 */
-};
-
-static struct platform_device i2c_gpio12 = {
-	.name		= "i2c-gpio",
-	.id		= I2C_GPIO_BUS_12,
-	.dev		= {
-		.platform_data	= &i2c_gpio12_data,
-	},
-};
-
-static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
-		.platform_data = &touchkey_data,
-	},
-};
-
-static void __init universal_touchkey_init(void)
-{
-	int gpio;
-
-	gpio = EXYNOS4_GPE3(7);			/* XMDMDATA_7 */
-	gpio_request(gpio, "3_TOUCH_INT");
-	s5p_register_gpio_interrupt(gpio);
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
-
-	gpio = EXYNOS4_GPE3(3);			/* XMDMDATA_3 */
-	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
-}
-
-static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
-	.frequency	= 300 * 1000,
-	.sda_delay	= 200,
-};
-
-/* GPIO KEYS */
-static struct gpio_keys_button universal_gpio_keys_tables[] = {
-	{
-		.code			= KEY_VOLUMEUP,
-		.gpio			= EXYNOS4_GPX2(0),	/* XEINT16 */
-		.desc			= "gpio-keys: KEY_VOLUMEUP",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_VOLUMEDOWN,
-		.gpio			= EXYNOS4_GPX2(1),	/* XEINT17 */
-		.desc			= "gpio-keys: KEY_VOLUMEDOWN",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_CONFIG,
-		.gpio			= EXYNOS4_GPX2(2),	/* XEINT18 */
-		.desc			= "gpio-keys: KEY_CONFIG",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_CAMERA,
-		.gpio			= EXYNOS4_GPX2(3),	/* XEINT19 */
-		.desc			= "gpio-keys: KEY_CAMERA",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_OK,
-		.gpio			= EXYNOS4_GPX3(5),	/* XEINT29 */
-		.desc			= "gpio-keys: KEY_OK",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data universal_gpio_keys_data = {
-	.buttons	= universal_gpio_keys_tables,
-	.nbuttons	= ARRAY_SIZE(universal_gpio_keys_tables),
-};
-
-static struct platform_device universal_gpio_keys = {
-	.name			= "gpio-keys",
-	.dev			= {
-		.platform_data	= &universal_gpio_keys_data,
-	},
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
-	.max_width		= 8,
-	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct regulator_consumer_supply mmc0_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
-};
-
-static struct regulator_init_data mmc0_fixed_voltage_init_data = {
-	.constraints		= {
-		.name		= "VMEM_VDD_2.8V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(mmc0_supplies),
-	.consumer_supplies	= mmc0_supplies,
-};
-
-static struct fixed_voltage_config mmc0_fixed_voltage_config = {
-	.supply_name		= "MASSMEMORY_EN",
-	.microvolts		= 2800000,
-	.gpio			= EXYNOS4_GPE1(3),
-	.enable_high		= true,
-	.init_data		= &mmc0_fixed_voltage_init_data,
-};
-
-static struct platform_device mmc0_fixed_voltage = {
-	.name			= "reg-fixed-voltage",
-	.id			= FIXED_REG_ID_MMC0,
-	.dev			= {
-		.platform_data	= &mmc0_fixed_voltage_config,
-	},
-};
-
-/* SD */
-static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.ext_cd_gpio		= EXYNOS4_GPX3(4),      /* XEINT_28 */
-	.ext_cd_gpio_invert	= 1,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-};
-
-/* WiFi */
-static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
-};
-
-static void __init universal_sdhci_init(void)
-{
-	s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
-	s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
-	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
-}
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
-	/* Gyro, To be updated */
-};
-
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel = {
-		.timing	= {
-			.left_margin	= 16,
-			.right_margin	= 16,
-			.upper_margin	= 2,
-			.lower_margin	= 28,
-			.hsync_len	= 2,
-			.vsync_len	= 1,
-			.xres		= 480,
-			.yres		= 800,
-			.refresh	= 55,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
-			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.default_win	= 3,
-	.bpp		= 32,
-};
-#else
-/* Frame Buffer */
-static struct s3c_fb_pd_win universal_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 480,
-	.yres		= 800,
-	.virtual_x	= 480,
-	.virtual_y	= 2 * 800,
-};
-
-static struct fb_videomode universal_lcd_timing = {
-	.left_margin	= 16,
-	.right_margin	= 16,
-	.upper_margin	= 2,
-	.lower_margin	= 28,
-	.hsync_len	= 2,
-	.vsync_len	= 1,
-	.xres		= 480,
-	.yres		= 800,
-	.refresh	= 55,
-};
-
-static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
-	.win[0]		= &universal_fb_win0,
-	.vtiming	= &universal_lcd_timing,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
-			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static struct regulator_consumer_supply cam_vt_dio_supply =
-	REGULATOR_SUPPLY("vdd_core", "0-003c");
-
-static struct regulator_init_data cam_vt_dio_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_vt_dio_supply,
-};
-
-static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
-	.supply_name	= "CAM_VT_D_IO",
-	.microvolts	= 2800000,
-	.gpio		= EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
-	.enable_high	= 1,
-	.init_data	= &cam_vt_dio_reg_init_data,
-};
-
-static struct platform_device cam_vt_dio_fixed_reg_dev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
-	.dev = { .platform_data	= &cam_vt_dio_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_i_core_supply =
-	REGULATOR_SUPPLY("core", "0-001f");
-
-static struct regulator_init_data cam_i_core_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_i_core_supply,
-};
-
-static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
-	.supply_name	= "CAM_I_CORE_1.2V",
-	.microvolts	= 1200000,
-	.gpio		= EXYNOS4_GPE2(2),	/* CAM_8M_CORE_EN */
-	.enable_high	= 1,
-	.init_data	= &cam_i_core_reg_init_data,
-};
-
-static struct platform_device cam_i_core_fixed_reg_dev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
-	.dev = { .platform_data	= &cam_i_core_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_s_if_supply =
-	REGULATOR_SUPPLY("d_sensor", "0-001f");
-
-static struct regulator_init_data cam_s_if_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_s_if_supply,
-};
-
-static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
-	.supply_name	= "CAM_S_IF_1.8V",
-	.microvolts	= 1800000,
-	.gpio		= EXYNOS4_GPE3(0),	/* CAM_PWR_EN1 */
-	.enable_high	= 1,
-	.init_data	= &cam_s_if_reg_init_data,
-};
-
-static struct platform_device cam_s_if_fixed_reg_dev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
-	.dev = { .platform_data	= &cam_s_if_fixed_voltage_cfg },
-};
-
-static struct s5p_platform_mipi_csis mipi_csis_platdata = {
-	.clk_rate	= 166000000UL,
-	.lanes		= 2,
-	.hs_settle	= 12,
-};
-
-#define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
-#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPX1(5)	/* XEINT_13 */
-#define GPIO_CAM_MEGA_nRST	EXYNOS4_GPE2(5)
-#define GPIO_CAM_VGA_NRST	EXYNOS4_GPE4(7)
-#define GPIO_CAM_VGA_NSTBY	EXYNOS4_GPE4(6)
-
-static int s5k6aa_set_power(int on)
-{
-	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
-	return 0;
-}
-
-static struct s5k6aa_platform_data s5k6aa_platdata = {
-	.mclk_frequency	= 21600000UL,
-	.gpio_reset	= { GPIO_CAM_VGA_NRST, 0 },
-	.gpio_stby	= { GPIO_CAM_VGA_NSTBY, 0 },
-	.bus_type	= V4L2_MBUS_PARALLEL,
-	.horiz_flip	= 1,
-	.set_power	= s5k6aa_set_power,
-};
-
-static struct i2c_board_info s5k6aa_board_info = {
-	I2C_BOARD_INFO("S5K6AA", 0x3C),
-	.platform_data = &s5k6aa_platdata,
-};
-
-static int m5mols_set_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
-	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
-	return 0;
-}
-
-static struct m5mols_platform_data m5mols_platdata = {
-	.gpio_reset	= GPIO_CAM_MEGA_nRST,
-	.reset_polarity	= 0,
-	.set_power	= m5mols_set_power,
-};
-
-static struct i2c_board_info m5mols_board_info = {
-	I2C_BOARD_INFO("M5MOLS", 0x1F),
-	.platform_data = &m5mols_platdata,
-};
-
-static struct fimc_source_info universal_camera_sensors[] = {
-	{
-		.mux_id		= 0,
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.fimc_bus_type	= FIMC_BUS_TYPE_ITU_601,
-		.board_info	= &s5k6aa_board_info,
-		.i2c_bus_num	= 0,
-		.clk_frequency	= 24000000UL,
-	}, {
-		.mux_id		= 0,
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.fimc_bus_type	= FIMC_BUS_TYPE_MIPI_CSI2,
-		.board_info	= &m5mols_board_info,
-		.i2c_bus_num	= 0,
-		.clk_frequency	= 24000000UL,
-	},
-};
-
-static struct s5p_platform_fimc fimc_md_platdata = {
-	.source_info	= universal_camera_sensors,
-	.num_clients	= ARRAY_SIZE(universal_camera_sensors),
-};
-
-static struct gpio universal_camera_gpios[] = {
-	{ GPIO_CAM_LEVEL_EN(1),	GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
-	{ GPIO_CAM_LEVEL_EN(2),	GPIOF_OUT_INIT_LOW,  "CAM_LVL_EN2" },
-	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,            "8M_ISP_INT"  },
-	{ GPIO_CAM_MEGA_nRST,	GPIOF_OUT_INIT_LOW,  "CAM_8M_NRST" },
-	{ GPIO_CAM_VGA_NRST,	GPIOF_OUT_INIT_LOW,  "CAM_VGA_NRST"  },
-	{ GPIO_CAM_VGA_NSTBY,	GPIOF_OUT_INIT_LOW,  "CAM_VGA_NSTBY" },
-};
-
-/* USB OTG */
-static struct s3c_hsotg_plat universal_hsotg_pdata;
-
-static void __init universal_camera_init(void)
-{
-	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
-			 &s5p_device_mipi_csis0);
-	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
-			 &s5p_device_fimc_md);
-
-	if (gpio_request_array(universal_camera_gpios,
-			       ARRAY_SIZE(universal_camera_gpios))) {
-		pr_err("%s: GPIO request failed\n", __func__);
-		return;
-	}
-
-	if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
-		m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
-	else
-		pr_err("Failed to configure 8M_ISP_INT GPIO\n");
-
-	/* Free GPIOs controlled directly by the sensor drivers. */
-	gpio_free(GPIO_CAM_MEGA_nRST);
-	gpio_free(GPIO_CAM_8M_ISP_INT);
-	gpio_free(GPIO_CAM_VGA_NRST);
-	gpio_free(GPIO_CAM_VGA_NSTBY);
-
-	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
-		pr_err("Camera port A setup failed\n");
-}
-
-static struct platform_device *universal_devices[] __initdata = {
-	/* Samsung Platform Devices */
-	&s5p_device_mipi_csis0,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_g2d,
-	&mmc0_fixed_voltage,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c0,
-	&s3c_device_i2c3,
-	&s3c_device_i2c5,
-	&s5p_device_i2c_hdmiphy,
-	&hdmi_fixed_voltage,
-	&s5p_device_hdmi,
-	&s5p_device_sdo,
-	&s5p_device_mixer,
-
-	/* Universal Devices */
-	&i2c_gpio12,
-	&universal_gpio_keys,
-	&s5p_device_onenand,
-	&s5p_device_fimd0,
-	&s5p_device_jpeg,
-	&s3c_device_usb_hsotg,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&cam_vt_dio_fixed_reg_dev,
-	&cam_i_core_fixed_reg_dev,
-	&cam_s_if_fixed_reg_dev,
-	&s5p_device_fimc_md,
-};
-
-static void __init universal_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
-	exynos_set_timer_source(BIT(2) | BIT(4));
-	xxti_f = 0;
-	xusbxti_f = 24000000;
-}
-
-static void s5p_tv_setup(void)
-{
-	/* direct HPD to HDMI chip */
-	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
-	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
-	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init universal_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init universal_machine_init(void)
-{
-	universal_sdhci_init();
-	s5p_tv_setup();
-
-	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
-	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-
-	universal_tsp_init();
-	s3c_i2c3_set_platdata(NULL);
-	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
-
-	s3c_i2c5_set_platdata(NULL);
-	s5p_i2c_hdmiphy_set_platdata(NULL);
-	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
-
-#ifdef CONFIG_DRM_EXYNOS
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
-	s5p_fimd0_set_platdata(&universal_lcd_pdata);
-#endif
-
-	universal_touchkey_init();
-	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
-			ARRAY_SIZE(i2c_gpio12_devs));
-
-	s3c_hsotg_set_platdata(&universal_hsotg_pdata);
-	universal_camera_init();
-
-	/* Last */
-	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
-}
-
-MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
-	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(exynos_smp_ops),
-	.init_irq	= exynos4_init_irq,
-	.map_io		= universal_map_io,
-	.init_machine	= universal_machine_init,
-	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
-	.reserve        = &universal_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END