ARM: pxa: use correct __iomem annotations

This tries to clear up the confusion between integers and iomem pointers
in the marvell pxa platform. MMIO addresses are supposed to be __iomem*
values, in order to let the Linux type checking work correctly. This
patch moves the cast to __iomem as far back as possible, to the place
where the MMIO virtual address windows are defined.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

4 files changed, 16 insertions, 9 deletions

diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index 3143e994e67..149b30cd146 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -30,7 +30,7 @@ extern struct clkops apmu_clk_ops;
 
 #define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
 struct clk clk_##_name = {					\
-		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.clk_rst	= APBC_##_reg,			\
 		.fnclksel	= _fnclksel,			\
 		.rate		= _rate,			\
 		.ops		= &apbc_clk_ops,		\
@@ -38,7 +38,7 @@ struct clk clk_##_name = {					\
 
 #define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops)	\
 struct clk clk_##_name = {					\
-		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.clk_rst	= APBC_##_reg,			\
 		.fnclksel	= _fnclksel,			\
 		.rate		= _rate,			\
 		.ops		= _ops,				\
@@ -46,7 +46,7 @@ struct clk clk_##_name = {					\
 
 #define APMU_CLK(_name, _reg, _eval, _rate)			\
 struct clk clk_##_name = {					\
-		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.clk_rst	= APMU_##_reg,			\
 		.enable_val	= _eval,			\
 		.rate		= _rate,			\
 		.ops		= &apmu_clk_ops,		\
@@ -54,7 +54,7 @@ struct clk clk_##_name = {					\
 
 #define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops)		\
 struct clk clk_##_name = {					\
-		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.clk_rst	= APMU_##_reg,			\
 		.enable_val	= _eval,			\
 		.rate		= _rate,			\
 		.ops		= _ops,				\
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 0ec0ca80bb3..5720674739f 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -27,12 +27,12 @@ EXPORT_SYMBOL(mmp_chip_id);
 static struct map_desc standard_io_desc[] __initdata = {
 	{
 		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
-		.virtual	= APB_VIRT_BASE,
+		.virtual	= (unsigned long)APB_VIRT_BASE,
 		.length		= APB_PHYS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.pfn		= __phys_to_pfn(AXI_PHYS_BASE),
-		.virtual	= AXI_VIRT_BASE,
+		.virtual	= (unsigned long)AXI_VIRT_BASE,
 		.length		= AXI_PHYS_SIZE,
 		.type		= MT_DEVICE,
 	},
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
index 3254089a644..3e404acd6ff 100644
--- a/arch/arm/mach-mmp/include/mach/addr-map.h
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -11,6 +11,12 @@
 #ifndef __ASM_MACH_ADDR_MAP_H
 #define __ASM_MACH_ADDR_MAP_H
 
+#ifndef __ASSEMBLER__
+#define IOMEM(x)	((void __iomem *)(x))
+#else
+#define IOMEM(x)	(x)
+#endif
+
 /* APB - Application Subsystem Peripheral Bus
  *
  * NOTE: the DMA controller registers are actually on the AXI fabric #1
@@ -18,11 +24,11 @@
  * peripherals on APB, let's count it into the ABP mapping area.
  */
 #define APB_PHYS_BASE		0xd4000000
-#define APB_VIRT_BASE		0xfe000000
+#define APB_VIRT_BASE		IOMEM(0xfe000000)
 #define APB_PHYS_SIZE		0x00200000
 
 #define AXI_PHYS_BASE		0xd4200000
-#define AXI_VIRT_BASE		0xfe200000
+#define AXI_VIRT_BASE		IOMEM(0xfe200000)
 #define AXI_PHYS_SIZE		0x00200000
 
 /* Static Memory Controller - Chip Select 0 and 1 */
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 079c18861d5..a80cbea4049 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -87,7 +87,8 @@ static struct mfp_addr_map mmp2_addr_map[] __initdata = {
 
 void mmp2_clear_pmic_int(void)
 {
-	unsigned long mfpr_pmic, data;
+	void __iomem *mfpr_pmic;
+	unsigned long data;
 
 	mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
 	data = __raw_readl(mfpr_pmic);