[ARM] 3141/1: OMAP 1/5: Update omap1 specific files

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:

- Omap1 serial pport and framebuffer init updates by Imre Deak

- Add support for omap310 processor and Palm Tungsten E PDA
  by Laurent Gonzales, Romain Goyet, et al. Omap310 and
  omap1510 processors are now handled as omap15xx.

- Omap1 specific changes to shared omap clock framework
  by Tony Lindgren

- Omap1 specific changes to shared omap pin mux framework
  by Tony Lindgren

- Other misc fixes, such as update memory timings for smc91x,
  omap1 specific device initialization etc.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 3 insertions, 218 deletions

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 3c5d901efea..ecbc47514ad 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -25,56 +25,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/gpio.h>
 
-
-static void omap_nop_release(struct device *dev)
-{
-        /* Nothing */
-}
-
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define	OMAP_I2C_BASE		0xfffb3800
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= OMAP_I2C_BASE,
-		.end		= OMAP_I2C_BASE + 0x3f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_I2C,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-/* DMA not used; works around erratum writing to non-empty i2c fifo */
-
-static struct platform_device omap_i2c_device = {
-        .name           = "i2c_omap",
-        .id             = -1,
-        .dev = {
-                .release        = omap_nop_release,
-        },
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-static void omap_init_i2c(void)
-{
-	/* FIXME define and use a boot tag, in case of boards that
-	 * either don't wire up I2C, or chips that mux it differently...
-	 * it can include clocking and address info, maybe more.
-	 */
-	omap_cfg_reg(I2C_SCL);
-	omap_cfg_reg(I2C_SDA);
-
-	(void) platform_device_register(&omap_i2c_device);
-}
-#else
-static inline void omap_init_i2c(void) {}
-#endif
+extern void omap_nop_release(struct device *dev);
 
 /*-------------------------------------------------------------------------*/
 
@@ -110,137 +61,6 @@ static inline void omap_init_irda(void) {}
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-#define	OMAP_MMC1_BASE		0xfffb7800
-#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
-
-static struct omap_mmc_conf mmc1_conf;
-
-static u64 mmc1_dmamask = 0xffffffff;
-
-static struct resource mmc1_resources[] = {
-	{
-		.start		= IO_ADDRESS(OMAP_MMC1_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_MMC,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device1 = {
-	.name		= "mmci-omap",
-	.id		= 1,
-	.dev = {
-		.release	= omap_nop_release,
-		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_conf,
-	},
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-	.resource	= mmc1_resources,
-};
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-
-static struct omap_mmc_conf mmc2_conf;
-
-static u64 mmc2_dmamask = 0xffffffff;
-
-static struct resource mmc2_resources[] = {
-	{
-		.start		= IO_ADDRESS(OMAP_MMC2_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_1610_MMC2,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device2 = {
-	.name		= "mmci-omap",
-	.id		= 2,
-	.dev = {
-		.release	= omap_nop_release,
-		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_conf,
-	},
-	.num_resources	= ARRAY_SIZE(mmc2_resources),
-	.resource	= mmc2_resources,
-};
-#endif
-
-static void __init omap_init_mmc(void)
-{
-	const struct omap_mmc_config	*mmc_conf;
-	const struct omap_mmc_conf	*mmc;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
-		return;
-
-	/* block 1 is always available and has just one pinout option */
-	mmc = &mmc_conf->mmc[0];
-	if (mmc->enabled) {
-		omap_cfg_reg(MMC_CMD);
-		omap_cfg_reg(MMC_CLK);
-		omap_cfg_reg(MMC_DAT0);
-		if (cpu_is_omap1710()) {
-	              omap_cfg_reg(M15_1710_MMC_CLKI);
-	              omap_cfg_reg(P19_1710_MMC_CMDDIR);
-	              omap_cfg_reg(P20_1710_MMC_DATDIR0);
-	        }
-		if (mmc->wire4) {
-			omap_cfg_reg(MMC_DAT1);
-			/* NOTE:  DAT2 can be on W10 (here) or M15 */
-			if (!mmc->nomux)
-				omap_cfg_reg(MMC_DAT2);
-			omap_cfg_reg(MMC_DAT3);
-		}
-		mmc1_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device1);
-	}
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-	/* block 2 is on newer chips, and has many pinout options */
-	mmc = &mmc_conf->mmc[1];
-	if (mmc->enabled) {
-		if (!mmc->nomux) {
-			omap_cfg_reg(Y8_1610_MMC2_CMD);
-			omap_cfg_reg(Y10_1610_MMC2_CLK);
-			omap_cfg_reg(R18_1610_MMC2_CLKIN);
-			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc->wire4) {
-				omap_cfg_reg(V8_1610_MMC2_DAT1);
-				omap_cfg_reg(W15_1610_MMC2_DAT2);
-				omap_cfg_reg(R10_1610_MMC2_DAT3);
-			}
-
-			/* These are needed for the level shifter */
-			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
-			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
-			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
-		}
-
-		/* Feedback clock must be set on OMAP-1710 MMC2 */
-		if (cpu_is_omap1710())
-			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
-				     MOD_CONF_CTRL_1);
-		mmc2_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device2);
-	}
-#endif
-	return;
-}
-#else
-static inline void omap_init_mmc(void) {}
-#endif
-
 #if	defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC)
 
 #define	OMAP_RTC_BASE		0xfffb4800
@@ -279,38 +99,6 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE)
-
-#define	OMAP_WDT_BASE		0xfffeb000
-
-static struct resource wdt_resources[] = {
-	{
-		.start		= OMAP_WDT_BASE,
-		.end		= OMAP_WDT_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_wdt_device = {
-	.name	   = "omap1610_wdt",
-	.id	     = -1,
-	.dev = {
-		.release	= omap_nop_release,
-	},
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-static void omap_init_wdt(void)
-{
-	(void) platform_device_register(&omap_wdt_device);
-}
-#else
-static inline void omap_init_wdt(void) {}
-#endif
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -334,18 +122,15 @@ static inline void omap_init_wdt(void) {}
  * may be handled by the boot loader, and drivers should expect it will
  * normally have been done by the time they're probed.
  */
-static int __init omap_init_devices(void)
+static int __init omap1_init_devices(void)
 {
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	omap_init_i2c();
 	omap_init_irda();
-	omap_init_mmc();
 	omap_init_rtc();
-	omap_init_wdt();
 
 	return 0;
 }
-arch_initcall(omap_init_devices);
+arch_initcall(omap1_init_devices);