Merge branch 'irqchip-consolidation' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable

Conflicts:
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-omap4panda.c
	arch/arm/mach-omap2/include/mach/omap4-common.h
	arch/arm/plat-omap/include/plat/irqs.h

The changes to omap4-common.h were moved to arch/arm/mach-omap2/common.h
and the other trivial conflicts resolved.  The now empty ifdef in irqs.h
was also eliminated.

1 files changed, 0 insertions, 137 deletions

diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index feb90a10945..56964a0c4c7 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -10,146 +10,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#include <plat/multi.h>
-
-#define OMAP2_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP4_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
-#define	ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
 
 		.macro	disable_fiq
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-/*
- * Unoptimized irq functions for multi-omap2, 3 and 4
- */
-
-#ifdef MULTI_OMAP2
-		/*
-		 * Configure the interrupt base on the first interrupt.
-		 * See also omap_irq_base_init for setting omap_irq_base.
-		 */
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =omap_irq_base	@ irq base address
-		ldr	\base, [\base, #0]	@ irq base value
-		.endm
-
-		/* Check the pending interrupts. Note that base already set */
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		tst	\base, #0x100		@ gic address?
-		bne	4401f			@ found gic
-
-		/* Handle omap2 and omap3 */
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-
-		/*
-		 * ti816x has additional IRQ pending register. Checking this
-		 * register on omap2 & omap3 has no effect (read as 0).
-		 */
-		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-		cmp	\irqnr, #0x0
-9998:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-		b	9999f
-
-		/* Handle omap4 */
-4401:		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-		ldr     \tmp, =1021
-		bic     \irqnr, \irqstat, #0x1c00
-		cmp     \irqnr, #15
-		cmpcc   \irqnr, \irqnr
-		cmpne   \irqnr, \tmp
-		cmpcs   \irqnr, \irqnr
-9999:
-		.endm
-
-#ifdef CONFIG_SMP
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt
-		 * on the controller, since this requires the original irqstat
-		 * value which we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		it	cc
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		it	cs
-		cmpcs	\irqnr, \irqnr
-		.endm
-#endif	/* CONFIG_SMP */
-
-#else	/* MULTI_OMAP2 */
-
-
-/*
- * Optimized irq functions for omap2, 3 and 4
- */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-		.macro  get_irqnr_preamble, base, tmp
-#ifdef CONFIG_ARCH_OMAP2
-		ldr	\base, =OMAP2_IRQ_BASE
-#else
-		ldr	\base, =OMAP3_IRQ_BASE
-#endif
-		.endm
-
-		/* Check the pending interrupts. Note that base already set */
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	9999f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	9999f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-#ifdef CONFIG_SOC_OMAPTI816X
-		bne	9999f
-		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-		cmp	\irqnr, #0x0
-#endif
-9999:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
-		.endm
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP4
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr     \base, =OMAP4_IRQ_BASE
-		.endm
-
-#endif
-
-#endif	/* MULTI_OMAP2 */