Merge remote branch 'rmk/for-linus' into for-linus

* rmk/for-linus: (1557 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

Conflicts:
	arch/arm/mach-msm/board-msm7x27.c
	arch/arm/mach-msm/board-msm7x30.c
	arch/arm/mach-msm/board-qsd8x50.c
	arch/arm/mach-msm/board-sapphire.c
	arch/arm/mach-msm/include/mach/memory.h

1 files changed, 21 insertions, 2 deletions

diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 4e48e786bec..0fc550e7e48 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -39,9 +39,12 @@
 #include <asm/mach/time.h>
 #include <plat/dmtimer.h>
 #include <asm/localtimer.h>
+#include <asm/sched_clock.h>
 
 #include "timer-gp.h"
 
+#include <plat/common.h>
+
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
 
@@ -176,14 +179,19 @@ static void __init omap2_gp_clockevent_init(void)
 /* 
  * When 32k-timer is enabled, don't use GPTimer for clocksource
  * instead, just leave default clocksource which uses the 32k
- * sync counter.  See clocksource setup in see plat-omap/common.c. 
+ * sync counter.  See clocksource setup in plat-omap/counter_32k.c
  */
 
-static inline void __init omap2_gp_clocksource_init(void) {}
+static void __init omap2_gp_clocksource_init(void)
+{
+	omap_init_clocksource_32k();
+}
+
 #else
 /*
  * clocksource
  */
+static DEFINE_CLOCK_DATA(cd);
 static struct omap_dm_timer *gpt_clocksource;
 static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
@@ -198,6 +206,15 @@ static struct clocksource clocksource_gpt = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static void notrace dmtimer_update_sched_clock(void)
+{
+	u32 cyc;
+
+	cyc = omap_dm_timer_read_counter(gpt_clocksource);
+
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
 /* Setup free-running counter for clocksource */
 static void __init omap2_gp_clocksource_init(void)
 {
@@ -218,6 +235,8 @@ static void __init omap2_gp_clocksource_init(void)
 
 	omap_dm_timer_set_load_start(gpt, 1, 0);
 
+	init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate);
+
 	if (clocksource_register_hz(&clocksource_gpt, tick_rate))
 		printk(err2, clocksource_gpt.name);
 }