ARM: pxa: rename gpio_to_irq and irq_to_gpio

Avoid to define gpio_to_irq() and irq_to_gpio() for potential name
confliction since multiple architecture will be built together.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>

30 files changed, 81 insertions, 84 deletions

diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4efc16d39c7..5516317b9e6 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -50,8 +50,8 @@ static struct resource capc7117_ide_resources[] = {
 	       .flags = IORESOURCE_MEM
 	},
 	[2] = {
-	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
 	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
 	}
 };
@@ -80,7 +80,7 @@ static void __init capc7117_ide_init(void)
 static struct plat_serial8250_port ti16c752_platform_data[] = {
 	[0] = {
 	       .mapbase = 0x14000000,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
@@ -89,7 +89,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
 	},
 	[1] = {
 	       .mapbase = 0x14000040,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
@@ -98,7 +98,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
 	},
 	[2] = {
 	       .mapbase = 0x14000080,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
@@ -107,7 +107,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
 	},
 	[3] = {
 	       .mapbase = 0x140000c0,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 4ebcee5756b..431ef56700c 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -380,7 +380,7 @@ static struct spi_board_info cm_x270_spi_devices[] __initdata = {
 		.modalias		= "libertas_spi",
 		.max_speed_hz		= 13000000,
 		.bus_num		= 2,
-		.irq			= gpio_to_irq(95),
+		.irq			= PXA_GPIO_TO_IRQ(95),
 		.chip_select		= 0,
 		.controller_data	= &cm_x270_libertas_chip,
 		.platform_data		= &cm_x270_libertas_pdata,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 05bfa1b1c00..f0fe9a51dfc 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -218,8 +218,8 @@ static struct resource colibri_pxa270_dm9000_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.end	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
@@ -249,7 +249,7 @@ static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
 };
 
 static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
-	.irq		= gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+	.irq		= PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
 };
 
 static struct platform_device colibri_pxa270_ucb1400_device = {
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c825e8bf2db..0a6222e20f9 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -78,8 +78,8 @@ static struct resource colibri_asix_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
-		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
 		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
 	}
 };
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 692e1ffc558..8cbb2b43ed1 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -115,8 +115,8 @@ static struct resource colibri_asix_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
-		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
 		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
 	}
 };
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 549468d088b..3812ba0ff50 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -531,7 +531,7 @@ static struct spi_board_info corgi_spi_devices[] = {
 		.chip_select	= 0,
 		.platform_data	= &corgi_ads7846_info,
 		.controller_data= &corgi_ads7846_chip,
-		.irq		= gpio_to_irq(CORGI_GPIO_TP_INT),
+		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
 	}, {
 		.modalias	= "corgi-lcd",
 		.max_speed_hz	= 50000,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6f6368ece9b..82e9976e565 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -252,8 +252,8 @@ static struct resource asic3_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
-		.end	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* SD part */
@@ -263,8 +263,8 @@ static struct resource asic3_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[3] = {
-		.start	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
-		.end	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -587,7 +587,7 @@ static struct spi_board_info tsc2046_board_info[] __initdata = {
 		.modalias        = "ads7846",
 		.bus_num         = 2,
 		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
-		.irq             = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+		.irq             = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
 		.platform_data   = &tsc2046_info,
 		.controller_data = &tsc2046_chip,
 	},
@@ -635,15 +635,15 @@ static struct resource power_supply_resources[] = {
 		.name  = "ac",
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 		         IORESOURCE_IRQ_LOWEDGE,
-		.start = gpio_to_irq(GPIOD9_nAC_IN),
-		.end   = gpio_to_irq(GPIOD9_nAC_IN),
+		.start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
+		.end   = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
 	},
 	[1] = {
 		.name  = "usb",
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 		         IORESOURCE_IRQ_LOWEDGE,
-		.start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
-		.end   = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+		.start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
+		.end   = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index f78d5db758d..33e81e87a9d 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -86,7 +86,7 @@ static struct spi_board_info mcp251x_board_info[] = {
 		.chip_select     = 0,
 		.platform_data   = &mcp251x_info,
 		.controller_data = &mcp251x_chip_info1,
-		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
 	},
 	{
 		.modalias        = "mcp2515",
@@ -95,7 +95,7 @@ static struct spi_board_info mcp251x_board_info[] = {
 		.chip_select     = 1,
 		.platform_data   = &mcp251x_info,
 		.controller_data = &mcp251x_chip_info2,
-		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
 	},
 	{
 		.modalias        = "mcp2515",
@@ -104,7 +104,7 @@ static struct spi_board_info mcp251x_board_info[] = {
 		.chip_select     = 0,
 		.platform_data   = &mcp251x_info,
 		.controller_data = &mcp251x_chip_info3,
-		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
 	},
 	{
 		.modalias        = "mcp2515",
@@ -113,7 +113,7 @@ static struct spi_board_info mcp251x_board_info[] = {
 		.chip_select     = 1,
 		.platform_data   = &mcp251x_info,
 		.controller_data = &mcp251x_chip_info4,
-		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
 	}
 };
 
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
index 747ab1a71f2..2628e7b7211 100644
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -19,8 +19,8 @@
 #define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
 #define CSB726_FLASH_uMON	(8 * 1024 * 1024)
 
-#define CSB726_IRQ_LAN		gpio_to_irq(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501	gpio_to_irq(CSB726_GPIO_IRQ_SM501)
+#define CSB726_IRQ_LAN		PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501	PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
 
 #endif
 
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 13b90390708..5cf0137e64d 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -28,8 +28,5 @@
 /* The defines for the driver are needed for the accelerated accessors */
 #include "gpio-pxa.h"
 
-#define gpio_to_irq(gpio)	PXA_GPIO_TO_IRQ(gpio)
-#define irq_to_gpio(irq)	(irq - PXA_GPIO_TO_IRQ(0))
-
 #include <plat/gpio.h>
 #endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 9cd23569877..27147f6ff7c 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -395,7 +395,7 @@ static struct i2c_board_info littleton_i2c_info[] = {
 		.type		= "da9034",
 		.addr		= 0x34,
 		.platform_data	= &littleton_da9034_info,
-		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)),
+		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
 	},
 	[1] = {
 		.type		= "max7320",
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4b796c37af3..e340ea08424 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -184,8 +184,8 @@ static struct resource egpio_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end   = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+		.start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+		.end   = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -468,8 +468,8 @@ static struct resource pasic3_resources[] = {
 	},
 	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
 	[1] = {
-		.start  = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end    = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.start  = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.end    = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
 		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index b938fc2c316..23f90c74c19 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -541,15 +541,15 @@ static struct pda_power_pdata power_pdata = {
 static struct resource power_resources[] = {
 	[0] = {
 		.name	= "ac",
-		.start	= gpio_to_irq(GPIO96_AC_DETECT),
-		.end	= gpio_to_irq(GPIO96_AC_DETECT),
+		.start	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
+		.end	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 		IORESOURCE_IRQ_LOWEDGE,
 	},
 	[1] = {
 		.name	= "usb",
-		.start	= gpio_to_irq(GPIO13_nUSB_DETECT),
-		.end	= gpio_to_irq(GPIO13_nUSB_DETECT),
+		.start	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
+		.end	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 		IORESOURCE_IRQ_LOWEDGE,
 	},
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index b5a8fd3fce0..a13a1e36585 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -416,8 +416,8 @@ static struct resource dm9k_resources[] = {
 	       .flags = IORESOURCE_MEM
 	},
 	[2] = {
-	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
 	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
 	}
 };
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 1e6d796829a..8ee4b6cfa38 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -212,7 +212,7 @@ static struct spi_board_info poodle_spi_devices[] = {
 		.bus_num	= 1,
 		.platform_data	= &poodle_ads7846_info,
 		.controller_data= &poodle_ads7846_chip,
-		.irq		= gpio_to_irq(POODLE_GPIO_TP_INT),
+		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index f05f9486b0c..0f38cfce5c3 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -287,7 +287,7 @@ static inline void pxa25x_init_pm(void) {}
 
 static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
 {
-	int gpio = irq_to_gpio(d->irq);
+	int gpio = pxa_irq_to_gpio(d->irq);
 	uint32_t mask = 0;
 
 	if (gpio >= 0 && gpio < 85)
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index bc5a98ebaa7..44563a0997b 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -355,7 +355,7 @@ static inline void pxa27x_init_pm(void) {}
  */
 static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
 {
-	int gpio = irq_to_gpio(d->irq);
+	int gpio = pxa_irq_to_gpio(d->irq);
 	uint32_t mask;
 
 	if (gpio >= 0 && gpio < 128)
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 6810cddec92..9c58e87f2b8 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -292,8 +292,8 @@ static struct resource smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= gpio_to_irq(GPIO_ETH_IRQ),
-		.end	= gpio_to_irq(GPIO_ETH_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
 	}
 };
@@ -671,7 +671,7 @@ static struct lis3lv02d_platform_data lis3_pdata = {
 	.chip_select	= 1,			\
 	.controller_data = (void *) GPIO_ACCEL_CS,	\
 	.platform_data	= &lis3_pdata,		\
-	.irq		= gpio_to_irq(GPIO_ACCEL_IRQ),	\
+	.irq		= PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ),	\
 }
 
 #define SPI_DAC7512	\
@@ -955,7 +955,7 @@ static struct eeti_ts_platform_data eeti_ts_pdata = {
 static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
 	.type	= "eeti_ts",
 	.addr	= 0x0a,
-	.irq	= gpio_to_irq(GPIO_TOUCH_IRQ),
+	.irq	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
 	.platform_data = &eeti_ts_pdata,
 };
 
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fc2c1e05af9..423ec899a8a 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -96,8 +96,8 @@ static struct resource smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
@@ -502,7 +502,7 @@ static struct i2c_board_info saar_i2c_info[] = {
 		.type		= "da9034",
 		.addr		= 0x34,
 		.platform_data	= &saar_da9034_info,
-		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 3e999e308a2..d1cdd6a081e 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -92,7 +92,7 @@ static struct i2c_board_info saarb_i2c_info[] = {
 		.type		= "88PM860x",
 		.addr		= 0x34,
 		.platform_data	= &saarb_pm8607_info,
-		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 953a9195f9e..1b39cec03cc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -552,7 +552,7 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.chip_select		= 0,
 		.platform_data		= &spitz_ads7846_info,
 		.controller_data	= &spitz_ads7846_chip,
-		.irq			= gpio_to_irq(SPITZ_GPIO_TP_INT),
+		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
 	}, {
 		.modalias		= "corgi-lcd",
 		.max_speed_hz		= 50000,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index bbf79d532d1..940ca56b37f 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -546,7 +546,7 @@ static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
 		.type = "da9030",
 		.addr = 0x49,
 		.platform_data = &imote2_da9030_pdata,
-		.irq = gpio_to_irq(1),
+		.irq = PXA_GPIO_TO_IRQ(1),
 	},
 };
 
@@ -913,7 +913,7 @@ static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
 		.type = "da9030",
 		.addr = 0x49,
 		.platform_data = &stargate2_da9030_pdata,
-		.irq = gpio_to_irq(1),
+		.irq = PXA_GPIO_TO_IRQ(1),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ad47bb98f30..43bdcb9761f 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -85,8 +85,8 @@ static struct resource smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd569167302..46c60b3cbe7 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -101,7 +101,7 @@ static struct i2c_board_info evb3_i2c_info[] = {
 		.type		= "88PM860x",
 		.addr		= 0x34,
 		.platform_data	= &evb3_pm8607_info,
-		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 402b0c96613..1ddb9826448 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -404,8 +404,8 @@ static struct pda_power_pdata tosa_power_data = {
 static struct resource tosa_power_resource[] = {
 	{
 		.name		= "ac",
-		.start		= gpio_to_irq(TOSA_GPIO_AC_IN),
-		.end		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.start		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
+		.end		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
 		.flags		= IORESOURCE_IRQ |
 				  IORESOURCE_IRQ_HIGHEDGE |
 				  IORESOURCE_IRQ_LOWEDGE,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 242ddae332d..d9a653a7717 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -422,8 +422,8 @@ static struct resource smc91x_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = gpio_to_irq(VIPER_ETH_GPIO),
-		.end    = gpio_to_irq(VIPER_ETH_GPIO),
+		.start  = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
+		.end    = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
 		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 	[2] = {
@@ -546,7 +546,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	/* External UARTs */
 	{
 		.mapbase	= VIPER_UARTA_PHYS,
-		.irq		= gpio_to_irq(VIPER_UARTA_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
@@ -556,7 +556,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	},
 	{
 		.mapbase	= VIPER_UARTB_PHYS,
-		.irq		= gpio_to_irq(VIPER_UARTB_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
@@ -596,8 +596,8 @@ static struct resource isp116x_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[2] = {
-		.start  = gpio_to_irq(VIPER_USB_GPIO),
-		.end    = gpio_to_irq(VIPER_USB_GPIO),
+		.start  = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
+		.end    = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
 		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 585e4f443e1..bf2403c424b 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -610,8 +610,8 @@ static struct resource vpac270_ide_resources[] = {
 	       .flags	= IORESOURCE_DMA
 	},
 	[3] = {	/* IDE IRQ pin */
-	       .start	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
-	       .end	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+	       .start	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
+	       .end	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
 	       .flags	= IORESOURCE_IRQ
 	}
 };
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index ead32c90fec..424661833ce 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -573,7 +573,7 @@ static struct spi_board_info spi_board_info[] __initdata = {
 	.modalias		= "libertas_spi",
 	.platform_data		= &z2_lbs_pdata,
 	.controller_data	= &z2_lbs_chip_info,
-	.irq			= gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ),
+	.irq			= PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
 	.max_speed_hz		= 13000000,
 	.bus_num		= 1,
 	.chip_select		= 0,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 498b83b089f..68de9c17e4c 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -233,7 +233,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
 	{ /* COM1 */
 		.mapbase	= 0x10000000,
-		.irq		= gpio_to_irq(ZEUS_UARTA_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 14745600,
 		.regshift	= 1,
@@ -242,7 +242,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	},
 	{ /* COM2 */
 		.mapbase	= 0x10800000,
-		.irq		= gpio_to_irq(ZEUS_UARTB_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 14745600,
 		.regshift	= 1,
@@ -251,7 +251,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	},
 	{ /* COM3 */
 		.mapbase	= 0x11000000,
-		.irq		= gpio_to_irq(ZEUS_UARTC_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 14745600,
 		.regshift	= 1,
@@ -260,7 +260,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	},
 	{ /* COM4 */
 		.mapbase	= 0x11800000,
-		.irq		= gpio_to_irq(ZEUS_UARTD_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 14745600,
 		.regshift	= 1,
@@ -321,8 +321,8 @@ static struct resource zeus_dm9k0_resource[] = {
 		.flags = IORESOURCE_MEM
 	},
 	[2] = {
-		.start = gpio_to_irq(ZEUS_ETH0_GPIO),
-		.end   = gpio_to_irq(ZEUS_ETH0_GPIO),
+		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
@@ -339,8 +339,8 @@ static struct resource zeus_dm9k1_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[2] = {
-		.start = gpio_to_irq(ZEUS_ETH1_GPIO),
-		.end   = gpio_to_irq(ZEUS_ETH1_GPIO),
+		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
@@ -423,7 +423,7 @@ static struct spi_board_info zeus_spi_board_info[] = {
 	[0] = {
 		.modalias	= "mcp2515",
 		.platform_data	= &zeus_mcp2515_pdata,
-		.irq		= gpio_to_irq(ZEUS_CAN_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
 		.max_speed_hz	= 1*1000*1000,
 		.bus_num	= 3,
 		.mode		= SPI_MODE_0,
@@ -753,7 +753,7 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pca9535",	0x20),
 		.platform_data	= &zeus_pca953x_pdata[2],
-		.irq		= gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
 	},
 	{ I2C_BOARD_INFO("lm75a",	0x48) },
 	{ I2C_BOARD_INFO("24c01",	0x50) },
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 31d49689189..2406fd2727e 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -407,8 +407,8 @@ static void __init zylonite_init(void)
 	 * Note: We depend that the bootloader set
 	 * the correct value to MSC register for SMC91x.
 	 */
-	smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
-	smc91x_resources[1].end   = gpio_to_irq(gpio_eth_irq);
+	smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
+	smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
 	platform_device_register(&smc91x_device);
 
 	pxa_set_ac97_info(NULL);