Merge branch 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (133 commits)
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx
  ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210
  ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100
  ARM: S3C24XX: Use generic s3c_set_platdata for devices
  ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND
  ARM: SAMSUNG: Use generic s3c_set_platdata for NAND
  ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI
  ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON
  ARM: SAMSUNG: Use generic s3c_set_platdata for FB
  ARM: SAMSUNG: Use generic s3c_set_platdata for TS
  ARM: S3C64XX: Add PWM backlight support on SMDK6410
  ARM: S5P64X0: Add PWM backlight support on SMDK6450
  ARM: S5P64X0: Add PWM backlight support on SMDK6440
  ARM: S5PC100: Add PWM backlight support on SMDKC100
  ARM: S5PV210: Add PWM backlight support on SMDKV210
  ARM: EXYNOS4: Add PWM backlight support on SMDKC210
  ARM: EXYNOS4: Add PWM backlight support on SMDKV310
  ARM: SAMSUNG: Create a common infrastructure for PWM backlight support
  clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0
  ...

Fix up trivial conflict in arch/arm/mach-imx/mach-scb9328.c

6 files changed, 87 insertions, 173 deletions

diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index b2248e76ec8..b199596f9c3 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -12,6 +12,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#define pr_fmt(fmt) "%s: " fmt, __func__
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -161,10 +162,10 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	GPIO99_GPIO,			/* Ethernet IRQ */
 
 	/* RTC GPIOs */
-	GPIO95_GPIO,			/* RTC CS */
-	GPIO96_GPIO,			/* RTC WR */
-	GPIO97_GPIO,			/* RTC RD */
-	GPIO98_GPIO,			/* RTC IO */
+	GPIO95_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC CS */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC WR */
+	GPIO97_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC RD */
+	GPIO98_GPIO,				/* RTC IO */
 
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
@@ -484,14 +485,13 @@ static int cm_x300_ulpi_phy_reset(void)
 	int err;
 
 	/* reset the PHY */
-	err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset");
+	err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
+			       "ulpi reset");
 	if (err) {
-		pr_err("%s: failed to request ULPI reset GPIO: %d\n",
-		       __func__, err);
+		pr_err("failed to request ULPI reset GPIO: %d\n", err);
 		return err;
 	}
 
-	gpio_direction_output(GPIO_ULPI_PHY_RST, 0);
 	msleep(10);
 	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
 	msleep(10);
@@ -510,8 +510,7 @@ static inline int cm_x300_u2d_init(struct device *dev)
 		pout_clk = clk_get(NULL, "CLK_POUT");
 		if (IS_ERR(pout_clk)) {
 			err = PTR_ERR(pout_clk);
-			pr_err("%s: failed to get CLK_POUT: %d\n",
-			       __func__, err);
+			pr_err("failed to get CLK_POUT: %d\n", err);
 			return err;
 		}
 		clk_enable(pout_clk);
@@ -768,39 +767,36 @@ static void __init cm_x300_init_da9030(void)
 	irq_set_irq_wake(IRQ_WAKEUP0, 1);
 }
 
+/* wi2wi gpio setting for system_rev >= 130 */
+static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
+	{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
+	{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
+};
+
 static void __init cm_x300_init_wi2wi(void)
 {
 	int bt_reset, wlan_en;
 	int err;
 
 	if (system_rev < 130) {
-		wlan_en = 77;
-		bt_reset = 78;
-	} else {
-		wlan_en = 71;
-		bt_reset = 70;
+		cm_x300_wi2wi_gpios[0].gpio = 77;	/* wlan en */
+		cm_x300_wi2wi_gpios[1].gpio = 78;	/* bt reset */
 	}
 
 	/* Libertas and CSR reset */
-	err = gpio_request(wlan_en, "wlan en");
+	err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
 	if (err) {
-		pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
-	} else {
-		gpio_direction_output(wlan_en, 1);
-		gpio_free(wlan_en);
+		pr_err("failed to request wifi/bt gpios: %d\n", err);
+		return;
 	}
 
-	err = gpio_request(bt_reset, "bt reset");
-	if (err) {
-		pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
-	} else {
-		gpio_direction_output(bt_reset, 1);
-		udelay(10);
-		gpio_set_value(bt_reset, 0);
-		udelay(10);
-		gpio_set_value(bt_reset, 1);
-		gpio_free(bt_reset);
-	}
+	udelay(10);
+	gpio_set_value(bt_reset, 0);
+	udelay(10);
+	gpio_set_value(bt_reset, 1);
+
+	gpio_free(wlan_en);
+	gpio_free(bt_reset);
 }
 
 /* MFP */
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index f941a495a4a..99960a1814e 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -135,42 +135,6 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO66_GPIO,	/* nSDIO_IRQ */
 };
 
-#define HX4700_GPIO_IN(num, _desc) \
-	{ .gpio = (num), .dir = 0, .desc = (_desc) }
-#define HX4700_GPIO_OUT(num, _init, _desc) \
-	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
-struct gpio_ress {
-	unsigned gpio : 8;
-	unsigned dir : 1;
-	unsigned init : 1;
-	char *desc;
-};
-
-static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
-{
-	int i, rc = 0;
-	int gpio;
-	int dir;
-
-	for (i = 0; (!rc) && (i < size); i++) {
-		gpio = gpios[i].gpio;
-		dir = gpios[i].dir;
-		rc = gpio_request(gpio, gpios[i].desc);
-		if (rc) {
-			pr_err("Error requesting GPIO %d(%s) : %d\n",
-			       gpio, gpios[i].desc, rc);
-			continue;
-		}
-		if (dir)
-			gpio_direction_output(gpio, gpios[i].init);
-		else
-			gpio_direction_input(gpio);
-	}
-	while ((rc) && (--i >= 0))
-		gpio_free(gpios[i].gpio);
-	return rc;
-}
-
 /*
  * IRDA
  */
@@ -829,26 +793,30 @@ static struct platform_device *devices[] __initdata = {
 	&pcmcia,
 };
 
-static struct gpio_ress global_gpios[] = {
-	HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"),
-	HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"),
-	HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"),
-	HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1,          1, "LCD_PC1"),
-	HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET,       1, "LCD_RESET"),
-	HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1,        1, "LCD_SLIN1"),
-	HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN,          1, "LCD_SQN"),
-	HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"),
-	HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"),
-	HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON,         1, "RS232_ON"),
-	HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET,     1, "ASIC3_nRESET"),
-	HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET,      1, "EUART_RESET"),
-	HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON,          1, "nIR_EN"),
+static struct gpio global_gpios[] = {
+	{ GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" },
+	{ GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" },
+	{ GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" },
+	{ GPIO59_HX4700_LCD_PC1,          GPIOF_OUT_INIT_HIGH, "LCD_PC1" },
+	{ GPIO62_HX4700_LCD_nRESET,       GPIOF_OUT_INIT_HIGH, "LCD_RESET" },
+	{ GPIO70_HX4700_LCD_SLIN1,        GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" },
+	{ GPIO84_HX4700_LCD_SQN,          GPIOF_OUT_INIT_HIGH, "LCD_SQN" },
+	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
+	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
+	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+	{ GPIO105_HX4700_nIR_ON,          GPIOF_OUT_INIT_HIGH, "nIR_EN" },
 };
 
 static void __init hx4700_init(void)
 {
+	int ret;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
-	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
+	if (ret)
+		pr_err ("hx4700: Failed to request GPIOs.\n");
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 0a2efcf7947..7cbfc5d3f9d 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -12,6 +12,7 @@
 #ifndef _MAGICIAN_H_
 #define _MAGICIAN_H_
 
+#include <linux/gpio.h>
 #include <mach/irqs.h>
 
 /*
@@ -77,7 +78,7 @@
  * CPLD EGPIOs
  */
 
-#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO_BASE			NR_BUILTIN_GPIO
 #define MAGICIAN_EGPIO(reg,bit) \
 	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e1920572948..0e42798942f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -344,22 +344,14 @@ static struct pxafb_mach_info samsung_info = {
  * Backlight
  */
 
+static struct gpio magician_bl_gpios[] = {
+	{ EGPIO_MAGICIAN_BL_POWER,  GPIOF_DIR_OUT, "Backlight power" },
+	{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
+};
+
 static int magician_backlight_init(struct device *dev)
 {
-	int ret;
-
-	ret = gpio_request(EGPIO_MAGICIAN_BL_POWER, "BL_POWER");
-	if (ret)
-		goto err;
-	ret = gpio_request(EGPIO_MAGICIAN_BL_POWER2, "BL_POWER2");
-	if (ret)
-		goto err2;
-	return 0;
-
-err2:
-	gpio_free(EGPIO_MAGICIAN_BL_POWER);
-err:
-	return ret;
+	return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
 }
 
 static int magician_backlight_notify(struct device *dev, int brightness)
@@ -376,8 +368,7 @@ static int magician_backlight_notify(struct device *dev, int brightness)
 
 static void magician_backlight_exit(struct device *dev)
 {
-	gpio_free(EGPIO_MAGICIAN_BL_POWER);
-	gpio_free(EGPIO_MAGICIAN_BL_POWER2);
+	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
 }
 
 static struct platform_pwm_backlight_data backlight_data = {
@@ -712,16 +703,25 @@ static struct platform_device *devices[] __initdata = {
 	&leds_gpio,
 };
 
+static struct gpio magician_global_gpios[] = {
+	{ GPIO13_MAGICIAN_CPLD_IRQ,   GPIOF_IN, "CPLD_IRQ" },
+	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
+	{ GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
+	{ GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
+	{ GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
+	{ GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
+};
+
 static void __init magician_init(void)
 {
 	void __iomem *cpld;
 	int lcd_select;
 	int err;
 
-	gpio_request(GPIO13_MAGICIAN_CPLD_IRQ, "CPLD_IRQ");
-	gpio_request(GPIO107_MAGICIAN_DS1WM_IRQ, "DS1WM_IRQ");
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
+	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
+	if (err)
+		pr_err("magician: Failed to request GPIOs: %d\n", err);
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
@@ -729,11 +729,7 @@ static void __init magician_init(void)
 
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 
-	err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
-	if (!err) {
-		gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1);
-		pxa_set_ficp_info(&magician_ficp_info);
-	}
+	pxa_set_ficp_info(&magician_ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(&i2c_info);
 	pxa_set_mci_info(&magician_mci_info);
@@ -747,16 +743,9 @@ static void __init magician_init(void)
 		system_rev = board_id & 0x7;
 		lcd_select = board_id & 0x8;
 		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
-		if (lcd_select && (system_rev < 3)) {
-			gpio_request(GPIO75_MAGICIAN_SAMSUNG_POWER, "SAMSUNG_POWER");
-			gpio_direction_output(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
-		}
-		gpio_request(GPIO104_MAGICIAN_LCD_POWER_1, "LCD_POWER_1");
-		gpio_request(GPIO105_MAGICIAN_LCD_POWER_2, "LCD_POWER_2");
-		gpio_request(GPIO106_MAGICIAN_LCD_POWER_3, "LCD_POWER_3");
-		gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0);
-		gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0);
-		gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+		if (lcd_select && (system_rev < 3))
+			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
+			                 GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
 		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index e3470137c93..aa67637ae41 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -177,50 +177,6 @@ static unsigned long mioa701_pin_config[] = {
 	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
 };
 
-#define MIO_GPIO_IN(num, _desc) \
-	{ .gpio = (num), .dir = 0, .desc = (_desc) }
-#define MIO_GPIO_OUT(num, _init, _desc) \
-	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
-struct gpio_ress {
-	unsigned gpio : 8;
-	unsigned dir : 1;
-	unsigned init : 1;
-	char *desc;
-};
-
-static int mio_gpio_request(struct gpio_ress *gpios, int size)
-{
-	int i, rc = 0;
-	int gpio;
-	int dir;
-
-	for (i = 0; (!rc) && (i < size); i++) {
-		gpio = gpios[i].gpio;
-		dir = gpios[i].dir;
-		rc = gpio_request(gpio, gpios[i].desc);
-		if (rc) {
-			printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
-			       gpio, gpios[i].desc, rc);
-			continue;
-		}
-		if (dir)
-			gpio_direction_output(gpio, gpios[i].init);
-		else
-			gpio_direction_input(gpio);
-	}
-	while ((rc) && (--i >= 0))
-		gpio_free(gpios[i].gpio);
-	return rc;
-}
-
-static void mio_gpio_free(struct gpio_ress *gpios, int size)
-{
-	int i;
-
-	for (i = 0; i < size; i++)
-		gpio_free(gpios[i].gpio);
-}
-
 /* LCD Screen and Backlight */
 static struct platform_pwm_backlight_data mioa701_backlight_data = {
 	.pwm_id		= 0,
@@ -346,16 +302,16 @@ irqreturn_t gsm_on_irq(int irq, void *p)
 	return IRQ_HANDLED;
 }
 
-struct gpio_ress gsm_gpios[] = {
-	MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
-	MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
+static struct gpio gsm_gpios[] = {
+	{ GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" },
+	{ GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" },
 };
 
 static int __init gsm_init(void)
 {
 	int rc;
 
-	rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
+	rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
 	if (rc)
 		goto err_gpio;
 	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
@@ -369,7 +325,7 @@ static int __init gsm_init(void)
 
 err_irq:
 	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
-	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
 err_gpio:
 	printk(KERN_ERR "Mioa701: gsm not available\n");
 	return rc;
@@ -378,7 +334,7 @@ err_gpio:
 static void gsm_exit(void)
 {
 	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
-	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
 }
 
 /*
@@ -749,14 +705,16 @@ static void mioa701_restart(char c, const char *cmd)
 	arm_machine_restart('s', cmd);
 }
 
-static struct gpio_ress global_gpios[] = {
-	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
-	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
-	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
+static struct gpio global_gpios[] = {
+	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
+	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
+	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
 };
 
 static void __init mioa701_machine_init(void)
 {
+	int rc;
+
 	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
 	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
 	RTTR = 32768 - 1; /* Reset crazy WinCE value */
@@ -766,7 +724,9 @@ static void __init mioa701_machine_init(void)
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
-	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
+	rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
+	if (rc)
+		pr_err("MioA701: Failed to request GPIOs: %d", rc);
 	bootstrap_init();
 	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 9322fe527c7..e53a3334c94 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -104,7 +104,7 @@ static void __init saarb_init(void)
 
 MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.nr_irqs	= SAARB_NR_IRQS,
 	.init_irq       = pxa95x_init_irq,
 	.timer          = &pxa_timer,