Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...

24 files changed, 1088 insertions, 609 deletions

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index b6ec1062777..d4cfa214538 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -24,7 +24,6 @@ config REALVIEW_EB_ARM11MP
 config REALVIEW_EB_ARM11MP_REVB
 	bool "Support ARM11MPCore RevB tile"
 	depends on REALVIEW_EB_ARM11MP
-	default n
 	help
 	  Enable support for the ARM11MPCore RevB tile on the Realview
 	  platform. Since there are device address differences, a
@@ -48,6 +47,15 @@ config MACH_REALVIEW_PB1176
 	help
 	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
 
+config REALVIEW_PB1176_SECURE_FLASH
+	bool "Allow access to the secure flash memory block"
+	depends on MACH_REALVIEW_PB1176
+	default n
+	help
+	  Select this option if Linux will only run in secure mode on the
+	  RealView PB1176 platform and access to the secure flash memory
+	  block (64MB @ 0x3c000000) is required.
+
 config MACH_REALVIEW_PBA8
 	bool "Support RealView/PB-A8 platform"
 	select CPU_V7
@@ -58,6 +66,13 @@ config MACH_REALVIEW_PBA8
 	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
 	  PCI-E and Compact Flash.
 
+config MACH_REALVIEW_PBX
+	bool "Support RealView/PBX platform"
+	select ARM_GIC
+	select HAVE_PATA_PLATFORM
+	help
+	  Include support for the ARM(R) RealView PBX platform.
+
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"
 	depends on !MACH_REALVIEW_PB1176
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 7bea8ffc4b5..e704edb733c 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -7,5 +7,7 @@ obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 076acbc5070..9ea9c05093c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -48,6 +48,9 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
 #include "core.h"
 #include "clock.h"
 
@@ -578,21 +581,22 @@ void realview_leds_event(led_event_t ledevt)
 {
 	unsigned long flags;
 	u32 val;
+	u32 led = 1 << smp_processor_id();
 
 	local_irq_save(flags);
 	val = readl(VA_LEDS_BASE);
 
 	switch (ledevt) {
 	case led_idle_start:
-		val = val & ~REALVIEW_SYS_LED0;
+		val = val & ~led;
 		break;
 
 	case led_idle_end:
-		val = val | REALVIEW_SYS_LED0;
+		val = val | led;
 		break;
 
 	case led_timer:
-		val = val ^ REALVIEW_SYS_LED1;
+		val = val ^ REALVIEW_SYS_LED7;
 		break;
 
 	case led_halted:
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 21c08637683..59a337ba4be 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -51,9 +51,6 @@ extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
-#ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base;
-#endif
 extern void __iomem *timer0_va_base;
 extern void __iomem *timer1_va_base;
 extern void __iomem *timer2_va_base;
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 268d7701fa9..794a8d91a6a 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -62,111 +62,6 @@
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2	-1
-#define IRQ_EB11MP_UART3	-1
-#define IRQ_EB11MP_CLCD		-1
-#define IRQ_EB11MP_DMA		-1
-#define IRQ_EB11MP_WDOG		-1
-#define IRQ_EB11MP_GPIO0	-1
-#define IRQ_EB11MP_GPIO1	-1
-#define IRQ_EB11MP_GPIO2	-1
-#define IRQ_EB11MP_SCI		-1
-#define IRQ_EB11MP_SSP		-1
-
-#define NR_GIC_EB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
 /*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 858eea7b1ad..98f8e7eeacc 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -32,6 +32,8 @@
 #define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
 #define REALVIEW_PB1176_FLASH_BASE		0x30000000
 #define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
+#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
+#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
 
 #define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
 #define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
@@ -71,82 +73,4 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
-#define IRQ_PB1176_SCTL		-1
-
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index 53ea0e7a126..f0d68e0fea0 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,105 +81,4 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
 #endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index 307f97b16e5..4dfc67a4f45 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -70,81 +70,4 @@
 #define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
 #define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
 
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START			32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h
new file mode 100644
index 00000000000..848bfff6d8f
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pbx.h
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBX_H
+#define __ASM_ARCH_BOARD_PBX_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
+#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
+#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
+#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
+#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
+#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
+#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
+#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
+#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
+#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
+#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
+#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_FLASH0_BASE		0x40000000
+#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PBX_FLASH1_BASE		0x44000000
+#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
+#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
+#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+/*
+ * Tile-specific addresses
+ */
+#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
+#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
+#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
+#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
+#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
+#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
+
+#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
+
+/*
+ * PBX PCI regions
+ */
+#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_PBX_PROC_MASK          0xFF000000
+#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
+#define REALVIEW_PBX_PROC_ARM9          0x02000000
+#define REALVIEW_PBX_PROC_ARM11         0x04000000
+#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
+#define REALVIEW_PBX_PROC_A9MP          0x0C000000
+#define REALVIEW_PBX_PROC_A8            0x0E000000
+
+#define check_pbx_proc(proc_type)                                            \
+	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
+	== proc_type)
+
+#ifdef CONFIG_MACH_REALVIEW_PBX
+#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
+#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
+#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
+#else
+#define core_tile_pbx11mp()     0
+#define core_tile_pbxa9mp()     0
+#define core_tile_pbxa8()       0
+#endif
+
+#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 92dbcb9e179..932d8af1806 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -12,7 +12,8 @@
 
 #if defined(CONFIG_MACH_REALVIEW_EB) || \
     defined(CONFIG_MACH_REALVIEW_PB11MP) || \
-    defined(CONFIG_MACH_REALVIEW_PBA8)
+    defined(CONFIG_MACH_REALVIEW_PBA8) || \
+    defined(CONFIG_MACH_REALVIEW_PBX)
 #ifndef DEBUG_LL_UART_OFFSET
 #define DEBUG_LL_UART_OFFSET	0x00009000
 #elif DEBUG_LL_UART_OFFSET != 0x00009000
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
new file mode 100644
index 00000000000..204d5378f30
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_EB_H
+#define __MACH_IRQS_EB_H
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+#endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
new file mode 100644
index 00000000000..2410d4f8ddd
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB1176_H
+#define __MACH_IRQS_PB1176_H
+
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
new file mode 100644
index 00000000000..34e255add21
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB11MP_H
+#define __MACH_IRQS_PB11MP_H
+
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
new file mode 100644
index 00000000000..86792a9f2ab
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START			32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
+#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
+#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC		-1
+#define IRQ_PBA8_SCTL		-1
+
+#define NR_GIC_PBA8		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBA8
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
new file mode 100644
index 00000000000..deaad4302b1
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IRQS_PBX_H
+#define __MACH_IRQS_PBX_H
+
+#define IRQ_PBX_GIC_START			32
+
+/* L220
+#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
+#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
+#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
+*/
+
+/*
+ * PBX on-board gic irq sources
+ */
+#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
+#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
+#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
+#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
+#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
+#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
+#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
+#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
+#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
+#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
+
+#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
+#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
+/* ... */
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+
+/* ... */
+#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
+#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
+#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
+#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
+
+#define IRQ_PBX_SMC		-1
+#define IRQ_PBX_SCTL		-1
+
+#define NR_GIC_PBX		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBX
+ */
+#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PBX)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBX
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBX
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBX */
+
+#endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index fe5cb987aa2..78854f2fa32 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -22,10 +22,11 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
+#include <mach/irqs-eb.h>
+#include <mach/irqs-pb11mp.h>
+#include <mach/irqs-pb1176.h>
+#include <mach/irqs-pba8.h>
+#include <mach/irqs-pbx.h>
 
 #define IRQ_LOCALTIMER		29
 #define IRQ_LOCALWDOG		30
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
deleted file mode 100644
index d55802d645a..00000000000
--- a/arch/arm/mach-realview/include/mach/scu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-/*
- * SCU registers
- */
-#define SCU_CTRL		0x00
-#define SCU_CONFIG		0x04
-#define SCU_CPU_STATUS		0x08
-#define SCU_INVALIDATE		0x0c
-#define SCU_FPGA_REVISION	0x10
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 415d634d52a..83050378ffd 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -24,6 +24,7 @@
 #include <mach/board-pb11mp.h>
 #include <mach/board-pb1176.h>
 #include <mach/board-pba8.h>
+#include <mach/board-pbx.h>
 
 #define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
 #define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
@@ -43,6 +44,8 @@ static inline unsigned long get_uart_base(void)
 		return REALVIEW_PB1176_UART0_BASE;
 	else if (machine_is_realview_pba8())
 		return REALVIEW_PBA8_UART0_BASE;
+	else if (machine_is_realview_pbx())
+		return REALVIEW_PBX_UART0_BASE;
 	else
 		return 0;
 }
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 1c01d13460f..60b4e111f45 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -9,196 +9,18 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
 #include <linux/clockchips.h>
-#include <linux/irq.h>
-#include <linux/io.h>
 
-#include <asm/hardware/arm_twd.h>
-#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or IPI_TIMER
- */
-void local_timer_interrupt(void)
-{
-	struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
-
-	clk->event_handler(clk);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/* set up by the platform code */
-void __iomem *twd_base;
-
-static unsigned long mpcore_timer_rate;
-
-static void local_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* timer load already set up */
-		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
-			| TWD_TIMER_CONTROL_PERIODIC;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-}
-
-static int local_timer_set_next_event(unsigned long evt,
-				      struct clock_event_device *unused)
-{
-	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
-
-	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
-
-	return 0;
-}
-
-/*
- * local_timer_ack: checks for a local timer interrupt.
- *
- * If a local timer interrupt has occurred, acknowledge and return 1.
- * Otherwise, return 0.
- */
-int local_timer_ack(void)
-{
-	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
-		return 1;
-	}
-
-	return 0;
-}
-
-static void __cpuinit twd_calibrate_rate(void)
-{
-	unsigned long load, count;
-	u64 waitjiffies;
-
-	/*
-	 * If this is the first time round, we need to work out how fast
-	 * the timer ticks
-	 */
-	if (mpcore_timer_rate == 0) {
-		printk("Calibrating local timer... ");
-
-		/* Wait for a tick to start */
-		waitjiffies = get_jiffies_64() + 1;
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		/* OK, now the tick has started, let's get the timer going */
-		waitjiffies += 5;
-
-				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
-
-				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
-
-		mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
-
-		printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
-			(mpcore_timer_rate / 100000) % 100);
-	}
-
-	load = mpcore_timer_rate / HZ;
-
-	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
-}
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
 
 /*
  * Setup the local clock events for a CPU.
  */
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-	unsigned long flags;
-
-	twd_calibrate_rate();
-
-	clk->name		= "local_timer";
-	clk->features		= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	clk->rating		= 350;
-	clk->set_mode		= local_timer_set_mode;
-	clk->set_next_event	= local_timer_set_next_event;
-	clk->irq		= IRQ_LOCALTIMER;
-	clk->cpumask		= cpumask_of(cpu);
-	clk->shift		= 20;
-	clk->mult		= div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift);
-	clk->max_delta_ns	= clockevent_delta2ns(0xffffffff, clk);
-	clk->min_delta_ns	= clockevent_delta2ns(0xf, clk);
-
-	/* Make sure our local interrupt controller has this enabled */
-	local_irq_save(flags);
-	get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER);
-	local_irq_restore(flags);
-
-	clockevents_register_device(clk);
-}
-
-/*
- * take a local timer down
- */
-void __cpuexit local_timer_stop(void)
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
 }
-
-#else	/* CONFIG_LOCAL_TIMERS */
-
-static void dummy_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-}
-
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
-	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
-				  CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 400;
-	clk->mult               = 1;
-	clk->set_mode		= dummy_timer_set_mode;
-	clk->broadcast		= smp_timer_broadcast;
-	clk->cpumask		= cpumask_of(cpu);
-
-	clockevents_register_device(clk);
-}
-
-#endif	/* !CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 30a9c68591f..ac0e83f1cc3 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,10 +19,12 @@
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
+#include <asm/localtimer.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
-#include <mach/scu.h>
+#include <mach/board-pbx.h>
+#include <asm/smp_scu.h>
 
 #include "core.h"
 
@@ -40,35 +42,19 @@ static void __iomem *scu_base_addr(void)
 		return __io_address(REALVIEW_EB11MP_SCU_BASE);
 	else if (machine_is_realview_pb11mp())
 		return __io_address(REALVIEW_TC11MP_SCU_BASE);
+	else if (machine_is_realview_pbx() &&
+		 (core_tile_pbx11mp() || core_tile_pbxa9mp()))
+		return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
 	else
 		return (void __iomem *)0;
 }
 
-static unsigned int __init get_core_count(void)
+static inline unsigned int get_core_count(void)
 {
-	unsigned int ncores;
 	void __iomem *scu_base = scu_base_addr();
-
-	if (scu_base) {
-		ncores = __raw_readl(scu_base + SCU_CONFIG);
-		ncores = (ncores & 0x03) + 1;
-	} else
-		ncores = 1;
-
-	return ncores;
-}
-
-/*
- * Setup the SCU
- */
-static void scu_enable(void)
-{
-	u32 scu_ctrl;
-	void __iomem *scu_base = scu_base_addr();
-
-	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
-	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+	if (scu_base)
+		return scu_get_core_count(scu_base);
+	return 1;
 }
 
 static DEFINE_SPINLOCK(boot_lock);
@@ -184,7 +170,7 @@ void __init smp_init_cpus(void)
 	unsigned int i, ncores = get_core_count();
 
 	for (i = 0; i < ncores; i++)
-		cpu_set(i, cpu_possible_map);
+		set_cpu_possible(i, true);
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -217,19 +203,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (max_cpus > ncores)
 		max_cpus = ncores;
 
-#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-	/*
-	 * Enable the local timer or broadcast device for the boot CPU.
-	 */
-	local_timer_setup();
-#endif
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
 	 */
 	for (i = 0; i < max_cpus; i++)
-		cpu_set(i, cpu_present_map);
+		set_cpu_present(i, true);
 
 	/*
 	 * Initialise the SCU if there are more than one CPU and let
@@ -239,7 +218,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	 * WFI
 	 */
 	if (max_cpus > 1) {
-		scu_enable();
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		scu_enable(scu_base_addr());
 		poke_milo();
 	}
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c20fbef122b..8dfa44e08a9 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a64b84a7a3d..25efe71a67c 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -203,11 +203,23 @@ static struct amba_device *amba_devs[] __initdata = {
 /*
  * RealView PB1176 platform devices
  */
-static struct resource realview_pb1176_flash_resource = {
-	.start			= REALVIEW_PB1176_FLASH_BASE,
-	.end			= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
+static struct resource realview_pb1176_flash_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB1176_FLASH_BASE,
+		.end		= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_PB1176_SEC_FLASH_BASE,
+		.end		= REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
 };
+#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
+#define PB1176_FLASH_BLOCKS	2
+#else
+#define PB1176_FLASH_BLOCKS	1
+#endif
 
 static struct resource realview_pb1176_smsc911x_resources[] = {
 	[0] = {
@@ -271,7 +283,8 @@ static void __init realview_pb1176_init(void)
 	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
 #endif
 
-	realview_flash_register(&realview_pb1176_flash_resource, 1);
+	realview_flash_register(realview_pb1176_flash_resources,
+				PB1176_FLASH_BLOCKS);
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ea1e60eca35..dc4b1694390 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
new file mode 100644
index 00000000000..1fe294d0bf9
--- /dev/null
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -0,0 +1,335 @@
+/*
+ *  arch/arm/mach-realview/realview_pbx.c
+ *
+ *  Copyright (C) 2009 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pbx.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+
+static struct map_desc realview_pbx_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_PCI
+	{
+		.virtual	= PCIX_UNIT_BASE,
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
+		.length		= REALVIEW_PBX_PCI_BASE_SIZE,
+		.type		= MT_DEVICE,
+	},
+#endif
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+};
+
+static struct map_desc realview_local_io_desc[] __initdata = {
+	{
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
+		.length         = SZ_8K,
+		.type           = MT_DEVICE,
+	}
+};
+
+static void __init realview_pbx_map_io(void)
+{
+	iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
+}
+
+/*
+ * RealView PBXCore AMBA devices
+ */
+
+#define GPIO2_IRQ		{ IRQ_PBX_GPIO2, NO_IRQ }
+#define GPIO2_DMA		{ 0, 0 }
+#define GPIO3_IRQ		{ IRQ_PBX_GPIO3, NO_IRQ }
+#define GPIO3_DMA		{ 0, 0 }
+#define AACI_IRQ		{ IRQ_PBX_AACI, NO_IRQ }
+#define AACI_DMA		{ 0x80, 0x81 }
+#define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
+#define MMCI0_DMA		{ 0x84, 0 }
+#define KMI0_IRQ		{ IRQ_PBX_KMI0, NO_IRQ }
+#define KMI0_DMA		{ 0, 0 }
+#define KMI1_IRQ		{ IRQ_PBX_KMI1, NO_IRQ }
+#define KMI1_DMA		{ 0, 0 }
+#define PBX_SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define PBX_SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA		{ 0, 0 }
+#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD, NO_IRQ }
+#define PBX_CLCD_DMA		{ 0, 0 }
+#define DMAC_IRQ		{ IRQ_PBX_DMAC, NO_IRQ }
+#define DMAC_DMA		{ 0, 0 }
+#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA		{ 0, 0 }
+#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG, NO_IRQ }
+#define PBX_WATCHDOG_DMA	{ 0, 0 }
+#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0, NO_IRQ }
+#define PBX_GPIO0_DMA		{ 0, 0 }
+#define GPIO1_IRQ		{ IRQ_PBX_GPIO1, NO_IRQ }
+#define GPIO1_DMA		{ 0, 0 }
+#define PBX_RTC_IRQ		{ IRQ_PBX_RTC, NO_IRQ }
+#define PBX_RTC_DMA		{ 0, 0 }
+#define SCI_IRQ			{ IRQ_PBX_SCI, NO_IRQ }
+#define SCI_DMA			{ 7, 6 }
+#define PBX_UART0_IRQ		{ IRQ_PBX_UART0, NO_IRQ }
+#define PBX_UART0_DMA		{ 15, 14 }
+#define PBX_UART1_IRQ		{ IRQ_PBX_UART1, NO_IRQ }
+#define PBX_UART1_DMA		{ 13, 12 }
+#define PBX_UART2_IRQ		{ IRQ_PBX_UART2, NO_IRQ }
+#define PBX_UART2_DMA		{ 11, 10 }
+#define PBX_UART3_IRQ		{ IRQ_PBX_UART3, NO_IRQ }
+#define PBX_UART3_DMA		{ 0x86, 0x87 }
+#define PBX_SSP_IRQ		{ IRQ_PBX_SSP, NO_IRQ }
+#define PBX_SSP_DMA		{ 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:f2",	PBX_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:f3",	PBX_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:f4",	PBX_SSP,	NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd,	"issp:20",	PBX_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+/*
+ * RealView PB-X platform devices
+ */
+static struct resource realview_pbx_flash_resources[] = {
+	[0] = {
+		.start          = REALVIEW_PBX_FLASH0_BASE,
+		.end            = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = REALVIEW_PBX_FLASH1_BASE,
+		.end            = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct resource realview_pbx_smsc911x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_ETH_BASE,
+		.end		= REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_ETH,
+		.end		= IRQ_PBX_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource realview_pbx_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_USB_BASE,
+		.end		= REALVIEW_PBX_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_USB,
+		.end		= IRQ_PBX_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static void __init gic_init_irq(void)
+{
+	/* ARM PBX on-board GIC */
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+			      29);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
+	} else {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
+			      IRQ_PBX_GIC_START);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
+	}
+}
+
+static void __init realview_pbx_timer_init(void)
+{
+	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+
+#ifdef CONFIG_LOCAL_TIMERS
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
+#endif
+	realview_timer_init(IRQ_PBX_TIMER0_1);
+}
+
+static struct sys_timer realview_pbx_timer = {
+	.init		= realview_pbx_timer_init,
+};
+
+static void __init realview_pbx_init(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	if (core_tile_pbxa9mp()) {
+		void __iomem *l2x0_base =
+			__io_address(REALVIEW_PBX_TILE_L220_BASE);
+
+		/* set RAM latencies to 1 cycle for eASIC */
+		writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+		writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+		/* 16KB way size, 8-way associativity, parity disabled
+		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
+		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+	}
+#endif
+
+	realview_flash_register(realview_pbx_flash_resources,
+				ARRAY_SIZE(realview_pbx_flash_resources));
+	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
+	platform_device_register(&realview_i2c_device);
+	platform_device_register(&realview_cf_device);
+	realview_usb_register(realview_pbx_isp1761_resources);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= realview_pbx_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_pbx_timer,
+	.init_machine	= realview_pbx_init,
+MACHINE_END