Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...

1 files changed, 78 insertions, 0 deletions

diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
new file mode 100644
index 00000000000..2cc8bbe9168
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
@@ -0,0 +1,78 @@
+/*
+ * stmp378x: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_ADDRESS      0x000E0000
+#define BP_GPMI_CTRL0_ADDRESS      17
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA  0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE   0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE   0x2
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT      0x00010000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_BUFFER_MASK	0x000001FF
+#define BP_GPMI_ECCCTRL_BUFFER_MASK	0
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT			0
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT			1
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT			2
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT			3
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000001
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_RDN_DELAY	0x0000F000
+#define BP_GPMI_CTRL1_RDN_DELAY	12
+#define BM_GPMI_CTRL1_BCH_MODE	0x00040000
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+#define BM_GPMI_TIMING0_ADDRESS_SETUP	0x00FF0000
+#define BP_GPMI_TIMING0_ADDRESS_SETUP	16
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16