Merge tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "These are the main pinctrl changes for the v3.9 merge window.  The
  most interesting change by far is how the device core grabs pinctrl
  default handles avoiding the need to stick boilerplate into driver
  consumers.

   - Grabbing of default pinctrl handles from the device core.  These
     are the hunks hitting drivers/base.  All is ACKed by Greg, after a
     long discussion about different alternatives.

   - Some stuff also touches the MFD and ARM SoC trees, this has been
     coordinated and ACKed.

   - New drivers for:
     - The Tegra 114 sub-SoC
     - Allwinner sunxi
     - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540
       and AB8540.

   - Make it possible for hogged pins to enter a sleep mode, and make it
     possible for drivers to control that mode.

   - Various clean-up, extensions and device tree support to various pin
     controllers."

* tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits)
  pinctrl: tegra: add clfvs function to Tegra114 support
  pinctrl: generic: rename input schmitt disable
  pinctrl/pinconfig: add debug interface
  pinctrl: samsung: remove duplicated line
  ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
  ARM: ux500: remove irq_base property from platform_data
  pinctrl/abx500: use direct IRQ defines
  pinctrl/abx500: replace IRQ offsets with table read-in values
  pinctrl/abx500: move IRQ handling to ab8500-core
  pinctrl: exynos5440: remove erroneous __init
  pinctrl/abx500: adjust offset for get_mode()
  pinctrl/abx500: add Device Tree support
  pinctrl/abx500: align GPIO cluster boundaries
  pinctrl/abx500: prevent error path from corrupting returning error
  pinctrl: sunxi: add of_xlate function
  pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
  pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
  pinctrl/lantiq: fix pinconfig parameters
  pinctrl/lantiq: one of the boot leds was defined incorrectly
  pinctrl/lantiq: only probe available pad controllers
  ...

1 files changed, 1 insertions, 19 deletions

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index d453522edb0..b8781caa54b 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -90,26 +90,8 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
        },
 };
 
-static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
+static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
 	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
-	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
-	/* config_reg is the initial configuration of ab8500 pins.
-	 * The pins can be configured as GPIO or alt functions based
-	 * on value present in GpioSel1 to GpioSel6 and AlternatFunction
-	 * register. This is the array of 7 configuration settings.
-	 * One has to compile time decide these settings. Below is the
-	 * explanation of these setting
-	 * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
-	 * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
-	 * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
-	 * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
-	 * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
-	 * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
-	 * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
-	 * as GPIO then this register selectes the alternate fucntions
-	 */
-	.config_reg		= {0x00, 0x1E, 0x80, 0x01,
-					0x7A, 0x00, 0x00},
 };
 
 /* ab8500-codec */