summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-mxc
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2009-02-02 14:11:54 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2009-03-13 10:34:25 +0100
commitc0a5f85523132dc893916d6059370233fac1cb11 (patch)
tree463817508d7fd36af4f7bed7285826f08569bd9d /arch/arm/plat-mxc
parent7e8549bcee00d92040904361cb1840c7a5eda615 (diff)
[ARM] MX35: Add register definitions for the i.MX35
This patch moves the stuff common to i.MX31 and i.MX35 to mx3x.h and the specifics to mx31.h/mx35.h. We can build a kernel which runs on i.MX31 and i.MX35, so always include mx31.h and mx35.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'arch/arm/plat-mxc')
-rw-r--r--arch/arm/plat-mxc/include/mach/hardware.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/mx31.h329
-rw-r--r--arch/arm/plat-mxc/include/mach/mx35.h29
-rw-r--r--arch/arm/plat-mxc/include/mach/mx3x.h290
4 files changed, 329 insertions, 323 deletions
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 11f5727ea44..42e4ee37ca1 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -23,7 +23,9 @@
#include <asm/sizes.h>
#ifdef CONFIG_ARCH_MX3
-# include <mach/mx31.h>
+#include <mach/mx3x.h>
+#include <mach/mx31.h>
+#include <mach/mx35.h>
#endif
#ifdef CONFIG_ARCH_MX2
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index de026654b00..0b06941b613 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,360 +1,45 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-/*
- * MX31 memory map:
- *
- * Virt Phys Size What
- * ---------------------------------------------------------------------------
- * F8000000 1FFC0000 16K IRAM
- * F9000000 30000000 256M L2CC
- * FC000000 43F00000 1M AIPS 1
- * FC100000 50000000 1M SPBA
- * FC200000 53F00000 1M AIPS 2
- * FC500000 60000000 128M ROMPATCH
- * FC400000 68000000 128M AVIC
- * 70000000 256M IPU (MAX M2)
- * 80000000 256M CSD0 SDRAM/DDR
- * 90000000 256M CSD1 SDRAM/DDR
- * A0000000 128M CS0 Flash
- * A8000000 128M CS1 Flash
- * B0000000 32M CS2
- * B2000000 32M CS3
- * F4000000 B4000000 32M CS4
- * B6000000 32M CS5
- * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers
- * C0000000 64M PCMCIA/CF
- */
-
-#define CS0_BASE_ADDR 0xA0000000
-#define CS1_BASE_ADDR 0xA8000000
-#define CS2_BASE_ADDR 0xB0000000
-#define CS3_BASE_ADDR 0xB2000000
-
-#define CS4_BASE_ADDR 0xB4000000
-#define CS4_BASE_ADDR_VIRT 0xF4000000
-#define CS4_SIZE SZ_32M
-
-#define CS5_BASE_ADDR 0xB6000000
-#define PCMCIA_MEM_BASE_ADDR 0xBC000000
-
-/*
* IRAM
*/
-#define IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */
-#define IRAM_BASE_ADDR_VIRT 0xF8000000
-#define IRAM_SIZE SZ_16K
-
-/*
- * L2CC
- */
-#define L2CC_BASE_ADDR 0x30000000
-#define L2CC_BASE_ADDR_VIRT 0xF9000000
-#define L2CC_SIZE SZ_1M
-
-/*
- * AIPS 1
- */
-#define AIPS1_BASE_ADDR 0x43F00000
-#define AIPS1_BASE_ADDR_VIRT 0xFC000000
-#define AIPS1_SIZE SZ_1M
+#define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */
+#define MX31_IRAM_SIZE SZ_16K
-#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000)
#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000)
#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000)
-#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000)
#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
-#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
-
-/*
- * SPBA global module enabled #0
- */
-#define SPBA0_BASE_ADDR 0x50000000
-#define SPBA0_BASE_ADDR_VIRT 0xFC100000
-#define SPBA0_SIZE SZ_1M
#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000)
#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
#define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000)
#define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000)
-#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
-#define MSHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000)
-/*
- * AIPS 2
- */
-#define AIPS2_BASE_ADDR 0x53F00000
-#define AIPS2_BASE_ADDR_VIRT 0xFC200000
-#define AIPS2_SIZE SZ_1M
-#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000)
#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000)
#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000)
-#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000)
#define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000)
#define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000)
-#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000)
#define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000)
-#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000)
-
-/*
- * ROMP and AVIC
- */
-#define ROMP_BASE_ADDR 0x60000000
-#define ROMP_BASE_ADDR_VIRT 0xFC500000
-#define ROMP_SIZE SZ_1M
-
-#define AVIC_BASE_ADDR 0x68000000
-#define AVIC_BASE_ADDR_VIRT 0xFC400000
-#define AVIC_SIZE SZ_1M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define X_MEMC_BASE_ADDR 0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT 0xFC320000
-#define X_MEMC_SIZE SZ_64K
-#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
-#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR
+#define MX31_NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE_ADDR 0x70000000
-#define CSD0_BASE_ADDR 0x80000000
-#define CSD1_BASE_ADDR 0x90000000
-#define CS0_BASE_ADDR 0xA0000000
-#define CS1_BASE_ADDR 0xA8000000
-#define CS2_BASE_ADDR 0xB0000000
-#define CS3_BASE_ADDR 0xB2000000
-
-#define CS4_BASE_ADDR 0xB4000000
-#define CS4_BASE_ADDR_VIRT 0xF4000000
-#define CS4_SIZE SZ_32M
-
-#define CS5_BASE_ADDR 0xB6000000
-#define PCMCIA_MEM_BASE_ADDR 0xBC000000
-
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x) \
- (void __iomem *) \
- (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
- ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
- ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
- ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
- ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
- ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
- ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
- ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
- ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
- 0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-
-#define IRAM_IO_ADDRESS(x) \
- (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
-
-#define L2CC_IO_ADDRESS(x) \
- (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
-#define AIPS1_IO_ADDRESS(x) \
- (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
-#define SPBA0_IO_ADDRESS(x) \
- (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x) \
- (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x) \
- (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x) \
- (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x) \
- (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-/*
- * Interrupt numbers
- */
-#define MXC_INT_PEN_ADS7843 0
-#define MXC_INT_RESV1 1
-#define MXC_INT_CS8900A 2
-#define MXC_INT_I2C3 3
-#define MXC_INT_I2C2 4
#define MXC_INT_MPEG4_ENCODER 5
-#define MXC_INT_RTIC 6
#define MXC_INT_FIRI 7
-#define MXC_INT_MMC_SDHC2 8
+#define MX31_INT_MMC_SDHC2 8
#define MXC_INT_MMC_SDHC1 9
-#define MXC_INT_I2C 10
-#define MXC_INT_SSI2 11
-#define MXC_INT_SSI1 12
-#define MXC_INT_CSPI2 13
-#define MXC_INT_CSPI1 14
-#define MXC_INT_ATA 15
+#define MX31_INT_SSI2 11
+#define MX31_INT_SSI1 12
#define MXC_INT_MBX 16
#define MXC_INT_CSPI3 17
-#define MXC_INT_UART3 18
-#define MXC_INT_IIM 19
#define MXC_INT_SIM2 20
#define MXC_INT_SIM1 21
-#define MXC_INT_RNGA 22
-#define MXC_INT_EVTMON 23
-#define MXC_INT_KPP 24
-#define MXC_INT_RTC 25
-#define MXC_INT_PWM 26
-#define MXC_INT_EPIT2 27
-#define MXC_INT_EPIT1 28
-#define MXC_INT_GPT 29
-#define MXC_INT_RESV30 30
-#define MXC_INT_RESV31 31
-#define MXC_INT_UART2 32
-#define MXC_INT_NANDFC 33
-#define MXC_INT_SDMA 34
+#define MXC_INT_CCM_DVFS 31
#define MXC_INT_USB1 35
#define MXC_INT_USB2 36
#define MXC_INT_USB3 37
#define MXC_INT_USB4 38
-#define MXC_INT_MSHC1 39
#define MXC_INT_MSHC2 40
-#define MXC_INT_IPU_ERR 41
-#define MXC_INT_IPU_SYN 42
-#define MXC_INT_RESV43 43
-#define MXC_INT_RESV44 44
-#define MXC_INT_UART1 45
#define MXC_INT_UART4 46
#define MXC_INT_UART5 47
-#define MXC_INT_ECT 48
-#define MXC_INT_SCC_SCM 49
-#define MXC_INT_SCC_SMN 50
-#define MXC_INT_GPIO2 51
-#define MXC_INT_GPIO1 52
#define MXC_INT_CCM 53
#define MXC_INT_PCMCIA 54
-#define MXC_INT_WDOG 55
-#define MXC_INT_GPIO3 56
-#define MXC_INT_RESV57 57
-#define MXC_INT_EXT_POWER 58
-#define MXC_INT_EXT_TEMPER 59
-#define MXC_INT_EXT_SENSOR60 60
-#define MXC_INT_EXT_SENSOR61 61
-#define MXC_INT_EXT_WDOG 62
-#define MXC_INT_EXT_TV 63
-
-#define PROD_SIGNATURE 0x1 /* For MX31 */
-
-/* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0 0x10
-#define CHIP_REV_1_1 0x11
-#define CHIP_REV_1_2 0x12
-#define CHIP_REV_1_3 0x13
-#define CHIP_REV_2_0 0x20
-#define CHIP_REV_2_1 0x21
-#define CHIP_REV_2_2 0x22
-#define CHIP_REV_2_3 0x23
-#define CHIP_REV_3_0 0x30
-#define CHIP_REV_3_1 0x31
-#define CHIP_REV_3_2 0x32
-
-#define SYSTEM_REV_MIN CHIP_REV_1_0
-#define SYSTEM_REV_NUM 3
-
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x00
-#define GPIO_GDIR 0x04
-#define GPIO_PSR 0x08
-#define GPIO_ICR1 0x0C
-#define GPIO_ICR2 0x10
-#define GPIO_IMR 0x14
-#define GPIO_ISR 0x18
-#define GPIO_INT_LOW_LEV 0x0
-#define GPIO_INT_HIGH_LEV 0x1
-#define GPIO_INT_RISE_EDGE 0x2
-#define GPIO_INT_FALL_EDGE 0x3
-#define GPIO_INT_NONE 0x4
-
-/* Mandatory defines used globally */
-
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS 96
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-/* this is a i.MX31 CPU */
-#define cpu_is_mx31() (1)
-
-extern unsigned int system_rev;
-
-static inline int mx31_revision(void)
-{
- return system_rev;
-}
-#endif
-#endif /* __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
new file mode 100644
index 00000000000..6465fefb42e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -0,0 +1,29 @@
+/*
+ * IRAM
+ */
+#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */
+#define MX35_IRAM_SIZE SZ_128K
+
+#define MXC_FEC_BASE_ADDR 0x50038000
+#define MX35_NFC_BASE_ADDR 0xBB000000
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_OWIRE 2
+#define MX35_INT_MMC_SDHC1 7
+#define MXC_INT_MMC_SDHC2 8
+#define MXC_INT_MMC_SDHC3 9
+#define MX35_INT_SSI1 11
+#define MX35_INT_SSI2 12
+#define MXC_INT_GPU2D 16
+#define MXC_INT_ASRC 17
+#define MXC_INT_USBHS 35
+#define MXC_INT_USBOTG 37
+#define MXC_INT_ESAI 40
+#define MXC_INT_CAN1 43
+#define MXC_INT_CAN2 44
+#define MXC_INT_MLB 46
+#define MXC_INT_SPDIF 47
+#define MXC_INT_FEC 57
+
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
new file mode 100644
index 00000000000..83a172b51b0
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -0,0 +1,290 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX31_H__
+#define __ASM_ARCH_MXC_MX31_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*
+ * MX31 memory map:
+ *
+ * Virt Phys Size What
+ * ---------------------------------------------------------------------------
+ * FC000000 43F00000 1M AIPS 1
+ * FC100000 50000000 1M SPBA
+ * FC200000 53F00000 1M AIPS 2
+ * FC500000 60000000 128M ROMPATCH
+ * FC400000 68000000 128M AVIC
+ * 70000000 256M IPU (MAX M2)
+ * 80000000 256M CSD0 SDRAM/DDR
+ * 90000000 256M CSD1 SDRAM/DDR
+ * A0000000 128M CS0 Flash
+ * A8000000 128M CS1 Flash
+ * B0000000 32M CS2
+ * B2000000 32M CS3
+ * F4000000 B4000000 32M CS4
+ * B6000000 32M CS5
+ * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers
+ * C0000000 64M PCMCIA/CF
+ */
+
+#define CS0_BASE_ADDR 0xA0000000
+#define CS1_BASE_ADDR 0xA8000000
+#define CS2_BASE_ADDR 0xB0000000
+#define CS3_BASE_ADDR 0xB2000000
+
+#define CS4_BASE_ADDR 0xB4000000
+#define CS4_BASE_ADDR_VIRT 0xF4000000
+#define CS4_SIZE SZ_32M
+
+#define CS5_BASE_ADDR 0xB6000000
+#define PCMCIA_MEM_BASE_ADDR 0xBC000000
+
+/*
+ * L2CC
+ */
+#define L2CC_BASE_ADDR 0x30000000
+#define L2CC_SIZE SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR 0x43F00000
+#define AIPS1_BASE_ADDR_VIRT 0xFC000000
+#define AIPS1_SIZE SZ_1M
+
+#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000)
+#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000)
+#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000)
+#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000)
+#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000)
+#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000)
+#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000)
+#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000)
+#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000)
+#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000)
+#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000)
+#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000)
+#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000)
+#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000)
+#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000)
+#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000)
+#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
+#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR 0x50000000
+#define SPBA0_BASE_ADDR_VIRT 0xFC100000
+#define SPBA0_SIZE SZ_1M
+
+#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
+#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
+#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
+#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR 0x53F00000
+#define AIPS2_BASE_ADDR_VIRT 0xFC200000
+#define AIPS2_SIZE SZ_1M
+#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000)
+#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000)
+#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000)
+#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000)
+#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000)
+#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000)
+#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000)
+#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000)
+#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000)
+#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000)
+#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000)
+#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000)
+#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000)
+#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000)
+#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000)
+#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000)
+
+/*
+ * ROMP and AVIC
+ */
+#define ROMP_BASE_ADDR 0x60000000
+#define ROMP_BASE_ADDR_VIRT 0xFC500000
+#define ROMP_SIZE SZ_1M
+
+#define AVIC_BASE_ADDR 0x68000000
+#define AVIC_BASE_ADDR_VIRT 0xFC400000
+#define AVIC_SIZE SZ_1M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define X_MEMC_BASE_ADDR 0xB8000000
+#define X_MEMC_BASE_ADDR_VIRT 0xFC320000
+#define X_MEMC_SIZE SZ_64K
+
+#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
+#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
+#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR 0x70000000
+#define CSD0_BASE_ADDR 0x80000000
+#define CSD1_BASE_ADDR 0x90000000
+
+/*!
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x) \
+ (void __iomem *) \
+ (((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
+ ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
+ ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
+ ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
+ ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
+ ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
+ ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
+ 0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define L2CC_IO_ADDRESS(x) \
+ (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
+
+#define AIPS1_IO_ADDRESS(x) \
+ (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
+
+#define SPBA0_IO_ADDRESS(x) \
+ (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
+
+#define AIPS2_IO_ADDRESS(x) \
+ (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
+
+#define ROMP_IO_ADDRESS(x) \
+ (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x) \
+ (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x) \
+ (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_I2C3 3
+#define MXC_INT_I2C2 4
+#define MXC_INT_RTIC 6
+#define MXC_INT_I2C 10
+#define MXC_INT_CSPI2 13
+#define MXC_INT_CSPI1 14
+#define MXC_INT_ATA 15
+#define MXC_INT_UART3 18
+#define MXC_INT_IIM 19
+#define MXC_INT_RNGA 22
+#define MXC_INT_EVTMON 23
+#define MXC_INT_KPP 24
+#define MXC_INT_RTC 25
+#define MXC_INT_PWM 26
+#define MXC_INT_EPIT2 27
+#define MXC_INT_EPIT1 28
+#define MXC_INT_GPT 29
+#define MXC_INT_POWER_FAIL 30
+#define MXC_INT_UART2 32
+#define MXC_INT_NANDFC 33
+#define MXC_INT_SDMA 34
+#define MXC_INT_MSHC1 39
+#define MXC_INT_IPU_ERR 41
+#define MXC_INT_IPU_SYN 42
+#define MXC_INT_UART1 45
+#define MXC_INT_ECT 48
+#define MXC_INT_SCC_SCM 49
+#define MXC_INT_SCC_SMN 50
+#define MXC_INT_GPIO2 51
+#define MXC_INT_GPIO1 52
+#define MXC_INT_WDOG 55
+#define MXC_INT_GPIO3 56
+#define MXC_INT_EXT_POWER 58
+#define MXC_INT_EXT_TEMPER 59
+#define MXC_INT_EXT_SENSOR60 60
+#define MXC_INT_EXT_SENSOR61 61
+#define MXC_INT_EXT_WDOG 62
+#define MXC_INT_EXT_TV 63
+
+#define PROD_SIGNATURE 0x1 /* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define CHIP_REV_1_0 0x10
+#define CHIP_REV_1_1 0x11
+#define CHIP_REV_1_2 0x12
+#define CHIP_REV_1_3 0x13
+#define CHIP_REV_2_0 0x20
+#define CHIP_REV_2_1 0x21
+#define CHIP_REV_2_2 0x22
+#define CHIP_REV_2_3 0x23
+#define CHIP_REV_3_0 0x30
+#define CHIP_REV_3_1 0x31
+#define CHIP_REV_3_2 0x32
+
+#define SYSTEM_REV_MIN CHIP_REV_1_0
+#define SYSTEM_REV_NUM 3
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x00
+#define GPIO_GDIR 0x04
+#define GPIO_PSR 0x08
+#define GPIO_ICR1 0x0C
+#define GPIO_ICR2 0x10
+#define GPIO_IMR 0x14
+#define GPIO_ISR 0x18
+#define GPIO_INT_LOW_LEV 0x0
+#define GPIO_INT_HIGH_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_FALL_EDGE 0x3
+#define GPIO_INT_NONE 0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS 96
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline int mx31_revision(void)
+{
+ return system_rev;
+}
+#endif
+
+#endif /* __ASM_ARCH_MXC_MX31_H__ */
+