summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 12:26:52 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 12:26:52 -0700
commit3498d13b8090c0b0ef911409fbc503a7c4cca6ef (patch)
tree254ca00276e863d9fba25707690c66b2a04c49e9 /arch/arm
parentdef7cb8cd4e3258db88050eaaca5438bcc3dafca (diff)
parent0c57dfcc6c1d037243c2f8fbf62eab3633326ec0 (diff)
Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-omap2/serial.c18
-rw-r--r--arch/arm/mach-ux500/board-mop500.c21
-rw-r--r--arch/arm/plat-omap/include/plat/omap-serial.h50
3 files changed, 21 insertions, 68 deletions
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c1b93c752d7..9e80d209d13 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
};
#ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
if (!od)
@@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
* in Smartidle Mode When Configured for DMA Operations.
* WA: configure uart in force idle mode.
*/
-static void omap_uart_set_noidle(struct platform_device *pdev)
+static void omap_uart_set_noidle(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
}
-static void omap_uart_set_smartidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
u8 idlemode;
@@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev)
}
#else
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{}
-static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_smartidle(struct platform_device *pdev) {}
+static void omap_uart_set_noidle(struct device *dev) {}
+static void omap_uart_set_smartidle(struct device *dev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
@@ -304,6 +307,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
omap_up.dma_rx_timeout = info->dma_rx_timeout;
omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
omap_up.autosuspend_timeout = info->autosuspend_timeout;
+ omap_up.DTR_gpio = info->DTR_gpio;
+ omap_up.DTR_inverted = info->DTR_inverted;
+ omap_up.DTR_present = info->DTR_present;
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a534d8880de..1d2e3c6f8b5 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -524,33 +524,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
};
#endif
-#define PRCC_K_SOFTRST_SET 0x18
-#define PRCC_K_SOFTRST_CLEAR 0x1C
-static void ux500_uart0_reset(void)
-{
- void __iomem *prcc_rst_set, *prcc_rst_clr;
-
- prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
- PRCC_K_SOFTRST_SET);
- prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
- PRCC_K_SOFTRST_CLEAR);
-
- /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
- writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
- udelay(1);
-
- /* Release soft reset PRCC_K_SOFTRST_SET */
- writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
- udelay(1);
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .reset = ux500_uart0_reset,
};
static struct amba_pl011_data uart1_plat = {
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725ffcf..a531149823b 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -18,7 +18,7 @@
#define __OMAP_SERIAL_H__
#include <linux/serial_core.h>
-#include <linux/platform_device.h>
+#include <linux/device.h>
#include <linux/pm_qos.h>
#include <plat/mux.h>
@@ -42,10 +42,10 @@
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX 0x04
+#define OMAP_UART_SW_TX 0x8
/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX 0x04
+#define OMAP_UART_SW_RX 0x2
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
@@ -69,11 +69,14 @@ struct omap_uart_port_info {
unsigned int dma_rx_timeout;
unsigned int autosuspend_timeout;
unsigned int dma_rx_poll_rate;
+ int DTR_gpio;
+ int DTR_inverted;
+ int DTR_present;
int (*get_context_loss_count)(struct device *);
- void (*set_forceidle)(struct platform_device *);
- void (*set_noidle)(struct platform_device *);
- void (*enable_wakeup)(struct platform_device *, bool);
+ void (*set_forceidle)(struct device *);
+ void (*set_noidle)(struct device *);
+ void (*enable_wakeup)(struct device *, bool);
};
struct uart_omap_dma {
@@ -102,39 +105,4 @@ struct uart_omap_dma {
unsigned int rx_timeout;
};
-struct uart_omap_port {
- struct uart_port port;
- struct uart_omap_dma uart_dma;
- struct platform_device *pdev;
-
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr;
- unsigned char fcr;
- unsigned char efr;
- unsigned char dll;
- unsigned char dlh;
- unsigned char mdr1;
- unsigned char scr;
-
- int use_dma;
- /*
- * Some bits in registers are cleared on a read, so they must
- * be saved whenever the register is read but the bits will not
- * be immediately processed.
- */
- unsigned int lsr_break_flag;
- unsigned char msr_saved_flags;
- char name[20];
- unsigned long port_activity;
- u32 context_loss_cnt;
- u32 errata;
- u8 wakeups_enabled;
-
- struct pm_qos_request pm_qos_request;
- u32 latency;
- u32 calc_latency;
- struct work_struct qos_work;
-};
-
#endif /* __OMAP_SERIAL_H__ */