summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-14 15:11:19 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-14 15:11:19 -0800
commit51be08419dc86c72486ac556aa39bc01026a403d (patch)
tree50ac35ac89f207d2a732b67eb2f1e9b671e5c064 /arch/arm
parentec8013beddd717d1740cfefb1a9b900deef85462 (diff)
parentf787f32e67e00b072f46b2ae3c454d2c0a1fcdb7 (diff)
Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (175 commits) module_param: make bool parameters really bool (drivers/video/i810) Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual." OMAPDSS: HDMI: Disable DDC internal pull up OMAPDSS: HDMI: Move duplicate code from boardfile OMAPDSS: add OrtusTech COM43H4M10XTC display support OMAP: DSS2: Support for UMSH-8173MD TFT panel ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver OMAPDSS: HDMI: Create function to enable HDMI audio ASoC: OMAP: HDMI: Correct signature of ASoC functions ASoC: OMAP: HDMI: Introduce driver data for audio codec grvga: fix section mismatch warnings video: s3c-fb: Don't keep device runtime active when open video: s3c-fb: Hold runtime PM references when touching registers video: s3c-fb: Take a runtime PM reference when unblanked video: s3c-fb: Disable runtime PM in error paths from probe video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer video: s3c-fb: Make runtime PM functional again drivers/video: fsl-diu-fb: merge fsl_diu_alloc() into map_video_memory() drivers/video: fsl-diu-fb: add default platform ops functions drivers/video: fsl-diu-fb: remove broken reference count enabling the display ...
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c23
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c25
-rw-r--r--arch/arm/mach-omap2/display.c39
-rw-r--r--arch/arm/mach-shmobile/board-ag5evm.c43
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c32
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c4
-rw-r--r--arch/arm/mach-shmobile/clock-sh7372.c4
-rw-r--r--arch/arm/mach-shmobile/clock-sh73a0.c4
8 files changed, 128 insertions, 46 deletions
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 2ceb75d21eb..39fba9df17f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -602,20 +602,6 @@ static void __init omap_sfh7741prox_init(void)
__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
}
-static void sdp4430_hdmi_mux_init(void)
-{
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_cec",
- OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
- omap_mux_init_signal("hdmi_ddc_scl",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_sda",
- OMAP_PIN_INPUT_PULLUP);
-}
-
static struct gpio sdp4430_hdmi_gpios[] = {
{ HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
@@ -833,9 +819,16 @@ static void omap_4430sdp_display_init(void)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
sdp4430_lcd_init();
- sdp4430_hdmi_mux_init();
sdp4430_picodlp_init();
omap_display_init(&sdp4430_dss_data);
+ /*
+ * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+ * later have external pull up on the HDMI I2C lines
+ */
+ if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+ omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+ else
+ omap_hdmi_init(0);
}
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e96a2e7ad36..30ad40db2cf 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -412,21 +412,6 @@ int __init omap4_panda_dvi_init(void)
return r;
}
-
-static void omap4_panda_hdmi_mux_init(void)
-{
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_cec",
- OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
- omap_mux_init_signal("hdmi_ddc_scl",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_sda",
- OMAP_PIN_INPUT_PULLUP);
-}
-
static struct gpio panda_hdmi_gpios[] = {
{ HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
@@ -478,8 +463,16 @@ void omap4_panda_display_init(void)
if (r)
pr_err("error initializing panda DVI\n");
- omap4_panda_hdmi_mux_init();
omap_display_init(&omap4_panda_dss_data);
+
+ /*
+ * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+ * later have external pull up on the HDMI I2C lines
+ */
+ if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+ omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+ else
+ omap_hdmi_init(0);
}
static void __init omap4_panda_init(void)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index bc6cf863a56..3c446d1a178 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -30,6 +30,7 @@
#include <plat/omap-pm.h>
#include "common.h"
+#include "mux.h"
#include "control.h"
#include "display.h"
@@ -97,6 +98,36 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
+static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
+{
+ u32 reg;
+ u16 control_i2c_1;
+
+ /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+ omap_mux_init_signal("hdmi_hpd",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hdmi_cec",
+ OMAP_PIN_INPUT_PULLUP);
+ /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+ omap_mux_init_signal("hdmi_ddc_scl",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hdmi_ddc_sda",
+ OMAP_PIN_INPUT_PULLUP);
+
+ /*
+ * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
+ * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
+ * internal pull up resistor.
+ */
+ if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
+ control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
+ reg = omap4_ctrl_pad_readl(control_i2c_1);
+ reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
+ OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
+ omap4_ctrl_pad_writel(reg, control_i2c_1);
+ }
+}
+
static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
{
u32 enable_mask, enable_shift;
@@ -130,6 +161,14 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
return 0;
}
+int omap_hdmi_init(enum omap_hdmi_flags flags)
+{
+ if (cpu_is_omap44xx())
+ omap4_hdmi_mux_pads(flags);
+
+ return 0;
+}
+
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
if (cpu_is_omap44xx())
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index a4e6ca04e31..eff8a96c75e 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -271,7 +271,7 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
.flags = LCDC_FLAGS_DWPOL,
.lcd_size_cfg.width = 44,
.lcd_size_cfg.height = 79,
- .bpp = 16,
+ .fourcc = V4L2_PIX_FMT_RGB565,
.lcd_cfg = lcdc0_modes,
.num_cfg = ARRAY_SIZE(lcdc0_modes),
.board_cfg = {
@@ -321,12 +321,46 @@ static struct resource mipidsi0_resources[] = {
},
};
+#define DSI0PHYCR 0xe615006c
+static int sh_mipi_set_dot_clock(struct platform_device *pdev,
+ void __iomem *base,
+ int enable)
+{
+ struct clk *pck;
+ int ret;
+
+ pck = clk_get(&pdev->dev, "dsip_clk");
+ if (IS_ERR(pck)) {
+ ret = PTR_ERR(pck);
+ goto sh_mipi_set_dot_clock_pck_err;
+ }
+
+ if (enable) {
+ clk_set_rate(pck, clk_round_rate(pck, 24000000));
+ __raw_writel(0x2a809010, DSI0PHYCR);
+ clk_enable(pck);
+ } else {
+ clk_disable(pck);
+ }
+
+ ret = 0;
+
+ clk_put(pck);
+
+sh_mipi_set_dot_clock_pck_err:
+ return ret;
+}
+
static struct sh_mipi_dsi_info mipidsi0_info = {
.data_format = MIPI_RGB888,
.lcd_chan = &lcdc0_info.ch[0],
+ .lane = 2,
.vsynw_offset = 20,
.clksrc = 1,
- .flags = SH_MIPI_DSI_HSABM,
+ .flags = SH_MIPI_DSI_HSABM |
+ SH_MIPI_DSI_SYNC_PULSES_MODE |
+ SH_MIPI_DSI_HSbyteCLK,
+ .set_dot_clock = sh_mipi_set_dot_clock,
};
static struct platform_device mipidsi0_device = {
@@ -472,8 +506,6 @@ static void __init ag5evm_map_io(void)
shmobile_setup_console();
}
-#define DSI0PHYCR 0xe615006c
-
static void __init ag5evm_init(void)
{
sh73a0_pinmux_init();
@@ -554,9 +586,6 @@ static void __init ag5evm_init(void)
gpio_direction_output(GPIO_PORT235, 0);
lcd_backlight_reset();
- /* MIPI-DSI clock setup */
- __raw_writel(0x2a809010, DSI0PHYCR);
-
/* enable SDHI0 on CN15 [SD I/F] */
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index d2e7b73aa9b..aab0a349f75 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -491,7 +491,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.meram_dev = &meram_info,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
- .bpp = 16,
+ .fourcc = V4L2_PIX_FMT_RGB565,
.lcd_cfg = ap4evb_lcdc_modes,
.num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes),
.meram_cfg = &lcd_meram_cfg,
@@ -564,6 +564,30 @@ static struct platform_device keysc_device = {
};
/* MIPI-DSI */
+#define PHYCTRL 0x0070
+static int sh_mipi_set_dot_clock(struct platform_device *pdev,
+ void __iomem *base,
+ int enable)
+{
+ struct clk *pck = clk_get(&pdev->dev, "dsip_clk");
+ void __iomem *phy = base + PHYCTRL;
+
+ if (IS_ERR(pck))
+ return PTR_ERR(pck);
+
+ if (enable) {
+ clk_set_rate(pck, clk_round_rate(pck, 24000000));
+ iowrite32(ioread32(phy) | (0xb << 8), phy);
+ clk_enable(pck);
+ } else {
+ clk_disable(pck);
+ }
+
+ clk_put(pck);
+
+ return 0;
+}
+
static struct resource mipidsi0_resources[] = {
[0] = {
.start = 0xffc60000,
@@ -580,7 +604,11 @@ static struct resource mipidsi0_resources[] = {
static struct sh_mipi_dsi_info mipidsi0_info = {
.data_format = MIPI_RGB888,
.lcd_chan = &lcdc_info.ch[0],
+ .lane = 2,
.vsynw_offset = 17,
+ .flags = SH_MIPI_DSI_SYNC_PULSES_MODE |
+ SH_MIPI_DSI_HSbyteCLK,
+ .set_dot_clock = sh_mipi_set_dot_clock,
};
static struct platform_device mipidsi0_device = {
@@ -798,7 +826,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
.meram_dev = &meram_info,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
- .bpp = 16,
+ .fourcc = V4L2_PIX_FMT_RGB565,
.interface_type = RGB24,
.clock_divider = 1,
.flags = LCDC_FLAGS_DWPOL,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index cbc5934ae03..9b42fbd10f8 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -388,7 +388,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
- .bpp = 16,
+ .fourcc = V4L2_PIX_FMT_RGB565,
.lcd_cfg = mackerel_lcdc_modes,
.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
.interface_type = RGB24,
@@ -451,7 +451,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
- .bpp = 16,
+ .fourcc = V4L2_PIX_FMT_RGB565,
.interface_type = RGB24,
.clock_divider = 1,
.flags = LCDC_FLAGS_DWPOL,
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index e349c22a0d7..293456d8dcf 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -612,8 +612,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
- CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 34944d01bf1..afbead6a6e1 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -427,8 +427,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
- CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */