Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:

 - Updates to the ux500 cpufreq code

 - Moving the u300 DMA controller driver to drivers/dma

 - Moving versatile express drivers out of arch/arm for sharing with arch/arm64

 - Device tree bindings for the OMAP General Purpose Memory Controller

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: OMAP2+: gpmc: Add device tree documentation for elm handle
  ARM: OMAP2+: gpmc: add DT bindings for OneNAND
  ARM: OMAP2+: gpmc-onenand: drop __init annotation
  mtd: omap-onenand: pass device_node in platform data
  ARM: OMAP2+: Prevent potential crash if GPMC probe fails
  ARM: OMAP2+: gpmc: Remove unneeded of_node_put()
  arm: Move sp810.h to include/linux/amba/
  ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs
  ARM: OMAP: gpmc-nand: drop __init annotation
  mtd: omap-nand: pass device_node in platform data
  ARM: OMAP: gpmc: don't create devices from initcall on DT
  dma: coh901318: cut down on platform data abstraction
  dma: coh901318: merge header files
  dma: coh901318: push definitions into driver
  dma: coh901318: push header down into the DMA subsystem
  dma: coh901318: skip hard-coded addresses
  dma: coh901318: remove hardcoded target addresses
  dma: coh901318: push platform data into driver
  dma: coh901318: create a proper platform data file
  ...

9 files changed, 243 insertions, 1489 deletions

diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
deleted file mode 100644
index 6636430dd0e..00000000000
--- a/arch/arm/include/asm/hardware/sp810.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/sp810.h
- *
- * ARM PrimeXsys System Controller SP810 header file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARM_SP810_H
-#define __ASM_ARM_SP810_H
-
-#include <linux/io.h>
-
-/* sysctl registers offset */
-#define SCCTRL			0x000
-#define SCSYSSTAT		0x004
-#define SCIMCTRL		0x008
-#define SCIMSTAT		0x00C
-#define SCXTALCTRL		0x010
-#define SCPLLCTRL		0x014
-#define SCPLLFCTRL		0x018
-#define SCPERCTRL0		0x01C
-#define SCPERCTRL1		0x020
-#define SCPEREN			0x024
-#define SCPERDIS		0x028
-#define SCPERCLKEN		0x02C
-#define SCPERSTAT		0x030
-#define SCSYSID0		0xEE0
-#define SCSYSID1		0xEE4
-#define SCSYSID2		0xEE8
-#define SCSYSID3		0xEEC
-#define SCITCR			0xF00
-#define SCITIR0			0xF04
-#define SCITIR1			0xF08
-#define SCITOR			0xF0C
-#define SCCNTCTRL		0xF10
-#define SCCNTDATA		0xF14
-#define SCCNTSTEP		0xF18
-#define SCPERIPHID0		0xFE0
-#define SCPERIPHID1		0xFE4
-#define SCPERIPHID2		0xFE8
-#define SCPERIPHID3		0xFEC
-#define SCPCELLID0		0xFF0
-#define SCPCELLID1		0xFF4
-#define SCPCELLID2		0xFF8
-#define SCPCELLID3		0xFFC
-
-#define SCCTRL_TIMERENnSEL_SHIFT(n)	(15 + ((n) * 2))
-
-static inline void sysctl_soft_reset(void __iomem *base)
-{
-	/* switch to slow mode */
-	writel(0x2, base + SCCTRL);
-
-	/* writing any value to SCSYSSTAT reg will reset system */
-	writel(0, base + SCSYSSTAT);
-}
-
-#endif	/* __ASM_ARM_SP810_H */
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index db969a5c499..afc1e8c32d6 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -89,20 +89,21 @@ static int omap2_nand_gpmc_retime(
 	return 0;
 }
 
-static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
+static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 {
 	/* support only OMAP3 class */
-	if (!cpu_is_omap34xx()) {
+	if (!cpu_is_omap34xx() && !soc_is_am33xx()) {
 		pr_err("BCH ecc is not supported on this CPU\n");
 		return 0;
 	}
 
 	/*
-	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
-	 * Other chips may be added if confirmed to work.
+	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
+	 * and AM33xx derivates. Other chips may be added if confirmed to work.
 	 */
 	if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
-	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)) &&
+	    (!soc_is_am33xx())) {
 		pr_err("BCH 4-bit mode is not supported on this CPU\n");
 		return 0;
 	}
@@ -110,8 +111,8 @@ static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 	return 1;
 }
 
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
-			  struct gpmc_timings *gpmc_t)
+int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
+		   struct gpmc_timings *gpmc_t)
 {
 	int err	= 0;
 	struct device *dev = &gpmc_nand_device.dev;
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 94a349e4dc9..fadd87435cd 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -356,7 +356,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 	return ret;
 }
 
-void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
 	int err;
 
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 64bac53da0e..03d771349be 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -25,6 +25,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/of_device.h>
+#include <linux/mtd/nand.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 
@@ -34,6 +38,8 @@
 #include "common.h"
 #include "omap_device.h"
 #include "gpmc.h"
+#include "gpmc-nand.h"
+#include "gpmc-onenand.h"
 
 #define	DEVICE_NAME		"omap-gpmc"
 
@@ -145,7 +151,8 @@ static unsigned gpmc_irq_start;
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
-static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
+/* Define chip-selects as reserved by default until probe completes */
+static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
 static struct device *gpmc_dev;
 static int gpmc_irq;
 static resource_size_t phys_base, mem_size;
@@ -1118,9 +1125,216 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
 	/* TODO: remove, see function definition */
 	gpmc_convert_ps_to_ns(gpmc_t);
 
+	/* Now the GPMC is initialised, unreserve the chip-selects */
+	gpmc_cs_map = 0;
+
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id gpmc_dt_ids[] = {
+	{ .compatible = "ti,omap2420-gpmc" },
+	{ .compatible = "ti,omap2430-gpmc" },
+	{ .compatible = "ti,omap3430-gpmc" },	/* omap3430 & omap3630 */
+	{ .compatible = "ti,omap4430-gpmc" },	/* omap4430 & omap4460 & omap543x */
+	{ .compatible = "ti,am3352-gpmc" },	/* am335x devices */
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
+
+static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
+						struct gpmc_timings *gpmc_t)
+{
+	u32 val;
+
+	memset(gpmc_t, 0, sizeof(*gpmc_t));
+
+	/* minimum clock period for syncronous mode */
+	if (!of_property_read_u32(np, "gpmc,sync-clk", &val))
+		gpmc_t->sync_clk = val;
+
+	/* chip select timtings */
+	if (!of_property_read_u32(np, "gpmc,cs-on", &val))
+		gpmc_t->cs_on = val;
+
+	if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val))
+		gpmc_t->cs_rd_off = val;
+
+	if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val))
+		gpmc_t->cs_wr_off = val;
+
+	/* ADV signal timings */
+	if (!of_property_read_u32(np, "gpmc,adv-on", &val))
+		gpmc_t->adv_on = val;
+
+	if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val))
+		gpmc_t->adv_rd_off = val;
+
+	if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val))
+		gpmc_t->adv_wr_off = val;
+
+	/* WE signal timings */
+	if (!of_property_read_u32(np, "gpmc,we-on", &val))
+		gpmc_t->we_on = val;
+
+	if (!of_property_read_u32(np, "gpmc,we-off", &val))
+		gpmc_t->we_off = val;
+
+	/* OE signal timings */
+	if (!of_property_read_u32(np, "gpmc,oe-on", &val))
+		gpmc_t->oe_on = val;
+
+	if (!of_property_read_u32(np, "gpmc,oe-off", &val))
+		gpmc_t->oe_off = val;
+
+	/* access and cycle timings */
+	if (!of_property_read_u32(np, "gpmc,page-burst-access", &val))
+		gpmc_t->page_burst_access = val;
+
+	if (!of_property_read_u32(np, "gpmc,access", &val))
+		gpmc_t->access = val;
+
+	if (!of_property_read_u32(np, "gpmc,rd-cycle", &val))
+		gpmc_t->rd_cycle = val;
+
+	if (!of_property_read_u32(np, "gpmc,wr-cycle", &val))
+		gpmc_t->wr_cycle = val;
+
+	/* only for OMAP3430 */
+	if (!of_property_read_u32(np, "gpmc,wr-access", &val))
+		gpmc_t->wr_access = val;
+
+	if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val))
+		gpmc_t->wr_data_mux_bus = val;
+}
+
+#ifdef CONFIG_MTD_NAND
+
+static const char * const nand_ecc_opts[] = {
+	[OMAP_ECC_HAMMING_CODE_DEFAULT]		= "sw",
+	[OMAP_ECC_HAMMING_CODE_HW]		= "hw",
+	[OMAP_ECC_HAMMING_CODE_HW_ROMCODE]	= "hw-romcode",
+	[OMAP_ECC_BCH4_CODE_HW]			= "bch4",
+	[OMAP_ECC_BCH8_CODE_HW]			= "bch8",
+};
+
+static int gpmc_probe_nand_child(struct platform_device *pdev,
+				 struct device_node *child)
+{
+	u32 val;
+	const char *s;
+	struct gpmc_timings gpmc_t;
+	struct omap_nand_platform_data *gpmc_nand_data;
+
+	if (of_property_read_u32(child, "reg", &val) < 0) {
+		dev_err(&pdev->dev, "%s has no 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data),
+				      GFP_KERNEL);
+	if (!gpmc_nand_data)
+		return -ENOMEM;
+
+	gpmc_nand_data->cs = val;
+	gpmc_nand_data->of_node = child;
+
+	if (!of_property_read_string(child, "ti,nand-ecc-opt", &s))
+		for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++)
+			if (!strcasecmp(s, nand_ecc_opts[val])) {
+				gpmc_nand_data->ecc_opt = val;
+				break;
+			}
+
+	val = of_get_nand_bus_width(child);
+	if (val == 16)
+		gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
+
+	gpmc_read_timings_dt(child, &gpmc_t);
+	gpmc_nand_init(gpmc_nand_data, &gpmc_t);
+
+	return 0;
+}
+#else
+static int gpmc_probe_nand_child(struct platform_device *pdev,
+				 struct device_node *child)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MTD_ONENAND
+static int gpmc_probe_onenand_child(struct platform_device *pdev,
+				 struct device_node *child)
+{
+	u32 val;
+	struct omap_onenand_platform_data *gpmc_onenand_data;
+
+	if (of_property_read_u32(child, "reg", &val) < 0) {
+		dev_err(&pdev->dev, "%s has no 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data),
+					 GFP_KERNEL);
+	if (!gpmc_onenand_data)
+		return -ENOMEM;
+
+	gpmc_onenand_data->cs = val;
+	gpmc_onenand_data->of_node = child;
+	gpmc_onenand_data->dma_channel = -1;
+
+	if (!of_property_read_u32(child, "dma-channel", &val))
+		gpmc_onenand_data->dma_channel = val;
+
+	gpmc_onenand_init(gpmc_onenand_data);
+
+	return 0;
+}
+#else
+static int gpmc_probe_onenand_child(struct platform_device *pdev,
+				    struct device_node *child)
+{
+	return 0;
+}
+#endif
+
+static int gpmc_probe_dt(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *child;
+	const struct of_device_id *of_id =
+		of_match_device(gpmc_dt_ids, &pdev->dev);
+
+	if (!of_id)
+		return 0;
+
+	for_each_node_by_name(child, "nand") {
+		ret = gpmc_probe_nand_child(pdev, child);
+		if (ret < 0) {
+			of_node_put(child);
+			return ret;
+		}
+	}
+
+	for_each_node_by_name(child, "onenand") {
+		ret = gpmc_probe_onenand_child(pdev, child);
+		if (ret < 0) {
+			of_node_put(child);
+			return ret;
+		}
+	}
+	return 0;
+}
+#else
+static int gpmc_probe_dt(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
 static int gpmc_probe(struct platform_device *pdev)
 {
 	int rc;
@@ -1172,6 +1386,14 @@ static int gpmc_probe(struct platform_device *pdev)
 	if (IS_ERR_VALUE(gpmc_setup_irq()))
 		dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
 
+	rc = gpmc_probe_dt(pdev);
+	if (rc < 0) {
+		clk_disable_unprepare(gpmc_l3_clk);
+		clk_put(gpmc_l3_clk);
+		dev_err(gpmc_dev, "failed to probe DT parameters\n");
+		return rc;
+	}
+
 	return 0;
 }
 
@@ -1189,6 +1411,7 @@ static struct platform_driver gpmc_driver = {
 	.driver		= {
 		.name	= DEVICE_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(gpmc_dt_ids),
 	},
 };
 
@@ -1212,6 +1435,13 @@ static int __init omap_gpmc_init(void)
 	struct platform_device *pdev;
 	char *oh_name = "gpmc";
 
+	/*
+	 * if the board boots up with a populated DT, do not
+	 * manually add the device from this initcall
+	 */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	oh = omap_hwmod_lookup(oh_name);
 	if (!oh) {
 		pr_err("Could not look up %s\n", oh_name);
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 12060ae4e8f..a683d17b2ce 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -31,6 +31,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/clk-u300.h>
 #include <linux/platform_data/pinctrl-coh901.h>
+#include <linux/platform_data/dma-coh901318.h>
 #include <linux/irqchip/arm-vic.h>
 
 #include <asm/types.h>
@@ -40,7 +41,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/coh901318.h>
 #include <mach/hardware.h>
 #include <mach/syscon.h>
 #include <mach/irqs.h>
@@ -49,7 +49,6 @@
 #include "spi.h"
 #include "i2c.h"
 #include "u300-gpio.h"
-#include "dma_channels.h"
 
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
@@ -327,1089 +326,6 @@ static struct resource dma_resource[] = {
 	}
 };
 
-/* points out all dma slave channels.
- * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
- * Select all channels from A to B, end of list is marked with -1,-1
- */
-static int dma_slave_channels[] = {
-	U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
-	U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
-
-/* points out all dma memcpy channels. */
-static int dma_memcpy_channels[] = {
-	U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
-
-/** register dma for memory access
- *
- * active  1 means dma intends to access memory
- *         0 means dma wont access memory
- */
-static void coh901318_access_memory_state(struct device *dev, bool active)
-{
-}
-
-#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
-			COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
-			COH901318_CX_CFG_LCR_DISABLE | \
-			COH901318_CX_CFG_TC_IRQ_ENABLE | \
-			COH901318_CX_CFG_BE_IRQ_ENABLE)
-#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
-			COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
-			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_MASTER_MODE_M1RW | \
-			COH901318_CX_CTRL_TCP_DISABLE | \
-			COH901318_CX_CTRL_TC_IRQ_DISABLE | \
-			COH901318_CX_CTRL_HSP_DISABLE | \
-			COH901318_CX_CTRL_HSS_DISABLE | \
-			COH901318_CX_CTRL_DDMA_LEGACY | \
-			COH901318_CX_CTRL_PRDD_SOURCE)
-#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
-			COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
-			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_MASTER_MODE_M1RW | \
-			COH901318_CX_CTRL_TCP_DISABLE | \
-			COH901318_CX_CTRL_TC_IRQ_DISABLE | \
-			COH901318_CX_CTRL_HSP_DISABLE | \
-			COH901318_CX_CTRL_HSS_DISABLE | \
-			COH901318_CX_CTRL_DDMA_LEGACY | \
-			COH901318_CX_CTRL_PRDD_SOURCE)
-#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
-			COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
-			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_MASTER_MODE_M1RW | \
-			COH901318_CX_CTRL_TCP_DISABLE | \
-			COH901318_CX_CTRL_TC_IRQ_ENABLE | \
-			COH901318_CX_CTRL_HSP_DISABLE | \
-			COH901318_CX_CTRL_HSS_DISABLE | \
-			COH901318_CX_CTRL_DDMA_LEGACY | \
-			COH901318_CX_CTRL_PRDD_SOURCE)
-
-const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
-	{
-		.number = U300_DMA_MSL_TX_0,
-		.name = "MSL TX 0",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
-	},
-	{
-		.number = U300_DMA_MSL_TX_1,
-		.name = "MSL TX 1",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_MSL_TX_2,
-		.name = "MSL TX 2",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.desc_nbr_max = 10,
-	},
-	{
-		.number = U300_DMA_MSL_TX_3,
-		.name = "MSL TX 3",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_MSL_TX_4,
-		.name = "MSL TX 4",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_MSL_TX_5,
-		.name = "MSL TX 5",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
-	},
-	{
-		.number = U300_DMA_MSL_TX_6,
-		.name = "MSL TX 6",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
-	},
-	{
-		.number = U300_DMA_MSL_RX_0,
-		.name = "MSL RX 0",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
-	},
-	{
-		.number = U300_DMA_MSL_RX_1,
-		.name = "MSL RX 1",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_2,
-		.name = "MSL RX 2",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_3,
-		.name = "MSL RX 3",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_4,
-		.name = "MSL RX 4",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_5,
-		.name = "MSL RX 5",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_6,
-		.name = "MSL RX 6",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
-	},
-	/*
-	 * Don't set up device address, burst count or size of src
-	 * or dst bus for this peripheral - handled by PrimeCell
-	 * DMA extension.
-	 */
-	{
-		.number = U300_DMA_MMCSD_RX_TX,
-		.name = "MMCSD RX TX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-
-	},
-	{
-		.number = U300_DMA_MSPRO_TX,
-		.name = "MSPRO TX",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_MSPRO_RX,
-		.name = "MSPRO RX",
-		.priority_high = 0,
-	},
-	/*
-	 * Don't set up device address, burst count or size of src
-	 * or dst bus for this peripheral - handled by PrimeCell
-	 * DMA extension.
-	 */
-	{
-		.number = U300_DMA_UART0_TX,
-		.name = "UART0 TX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-	},
-	{
-		.number = U300_DMA_UART0_RX,
-		.name = "UART0 RX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-	},
-	{
-		.number = U300_DMA_APEX_TX,
-		.name = "APEX TX",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_APEX_RX,
-		.name = "APEX RX",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_PCM_I2S0_TX,
-		.name = "PCM I2S0 TX",
-		.priority_high = 1,
-		.dev_addr = U300_PCM_I2S0_BASE + 0x14,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_PCM_I2S0_RX,
-		.name = "PCM I2S0 RX",
-		.priority_high = 1,
-		.dev_addr = U300_PCM_I2S0_BASE + 0x10,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_PCM_I2S1_TX,
-		.name = "PCM I2S1 TX",
-		.priority_high = 1,
-		.dev_addr =  U300_PCM_I2S1_BASE + 0x14,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_PCM_I2S1_RX,
-		.name = "PCM I2S1 RX",
-		.priority_high = 1,
-		.dev_addr = U300_PCM_I2S1_BASE + 0x10,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_XGAM_CDI,
-		.name = "XGAM CDI",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_XGAM_PDI,
-		.name = "XGAM PDI",
-		.priority_high = 0,
-	},
-	/*
-	 * Don't set up device address, burst count or size of src
-	 * or dst bus for this peripheral - handled by PrimeCell
-	 * DMA extension.
-	 */
-	{
-		.number = U300_DMA_SPI_TX,
-		.name = "SPI TX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-	},
-	{
-		.number = U300_DMA_SPI_RX,
-		.name = "SPI RX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_0,
-		.name = "GENERAL 00",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_1,
-		.name = "GENERAL 01",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_2,
-		.name = "GENERAL 02",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_3,
-		.name = "GENERAL 03",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_4,
-		.name = "GENERAL 04",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_5,
-		.name = "GENERAL 05",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_6,
-		.name = "GENERAL 06",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_7,
-		.name = "GENERAL 07",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_8,
-		.name = "GENERAL 08",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_UART1_TX,
-		.name = "UART1 TX",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_UART1_RX,
-		.name = "UART1 RX",
-		.priority_high = 0,
-	}
-};
-
-
-static struct coh901318_platform coh901318_platform = {
-	.chans_slave = dma_slave_channels,
-	.chans_memcpy = dma_memcpy_channels,
-	.access_memory_state = coh901318_access_memory_state,
-	.chan_conf = chan_config,
-	.max_channels = U300_DMA_CHANNELS,
-};
 
 static struct resource pinctrl_resources[] = {
 	{
@@ -1521,7 +437,6 @@ static struct platform_device dma_device = {
 	.resource	= dma_resource,
 	.num_resources  = ARRAY_SIZE(dma_resource),
 	.dev = {
-		.platform_data = &coh901318_platform,
 		.coherent_dma_mask = ~0,
 	},
 };
diff --git a/arch/arm/mach-u300/dma_channels.h b/arch/arm/mach-u300/dma_channels.h
deleted file mode 100644
index 4e8a88fbca4..00000000000
--- a/arch/arm/mach-u300/dma_channels.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/dma_channels.h
- *
- *
- * Copyright (C) 2007-2012 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Map file for the U300 dma driver.
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#ifndef DMA_CHANNELS_H
-#define DMA_CHANNELS_H
-
-#define U300_DMA_MSL_TX_0             0
-#define U300_DMA_MSL_TX_1             1
-#define U300_DMA_MSL_TX_2             2
-#define U300_DMA_MSL_TX_3             3
-#define U300_DMA_MSL_TX_4             4
-#define U300_DMA_MSL_TX_5             5
-#define U300_DMA_MSL_TX_6             6
-#define U300_DMA_MSL_RX_0             7
-#define U300_DMA_MSL_RX_1             8
-#define U300_DMA_MSL_RX_2             9
-#define U300_DMA_MSL_RX_3             10
-#define U300_DMA_MSL_RX_4             11
-#define U300_DMA_MSL_RX_5             12
-#define U300_DMA_MSL_RX_6             13
-#define U300_DMA_MMCSD_RX_TX          14
-#define U300_DMA_MSPRO_TX             15
-#define U300_DMA_MSPRO_RX             16
-#define U300_DMA_UART0_TX             17
-#define U300_DMA_UART0_RX             18
-#define U300_DMA_APEX_TX              19
-#define U300_DMA_APEX_RX              20
-#define U300_DMA_PCM_I2S0_TX          21
-#define U300_DMA_PCM_I2S0_RX          22
-#define U300_DMA_PCM_I2S1_TX          23
-#define U300_DMA_PCM_I2S1_RX          24
-#define U300_DMA_XGAM_CDI             25
-#define U300_DMA_XGAM_PDI             26
-#define U300_DMA_SPI_TX               27
-#define U300_DMA_SPI_RX               28
-#define U300_DMA_GENERAL_PURPOSE_0    29
-#define U300_DMA_GENERAL_PURPOSE_1    30
-#define U300_DMA_GENERAL_PURPOSE_2    31
-#define U300_DMA_GENERAL_PURPOSE_3    32
-#define U300_DMA_GENERAL_PURPOSE_4    33
-#define U300_DMA_GENERAL_PURPOSE_5    34
-#define U300_DMA_GENERAL_PURPOSE_6    35
-#define U300_DMA_GENERAL_PURPOSE_7    36
-#define U300_DMA_GENERAL_PURPOSE_8    37
-#define U300_DMA_UART1_TX             38
-#define U300_DMA_UART1_RX             39
-
-#define U300_DMA_DEVICE_CHANNELS      32
-#define U300_DMA_CHANNELS             40
-
-
-#endif /* DMA_CHANNELS_H */
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
deleted file mode 100644
index 7c3b2b2d25b..00000000000
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *
- * include/linux/coh901318.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * DMA driver for COH 901 318
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#ifndef COH901318_H
-#define COH901318_H
-
-#include <linux/device.h>
-#include <linux/dmaengine.h>
-
-#define MAX_DMA_PACKET_SIZE_SHIFT 11
-#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
-
-/**
- * struct coh901318_lli - linked list item for DMAC
- * @control: control settings for DMAC
- * @src_addr: transfer source address
- * @dst_addr: transfer destination address
- * @link_addr:  physical address to next lli
- * @virt_link_addr: virtual address of next lli (only used by pool_free)
- * @phy_this: physical address of current lli (only used by pool_free)
- */
-struct coh901318_lli {
-	u32 control;
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	dma_addr_t link_addr;
-
-	void *virt_link_addr;
-	dma_addr_t phy_this;
-};
-/**
- * struct coh901318_params - parameters for DMAC configuration
- * @config: DMA config register
- * @ctrl_lli_last: DMA control register for the last lli in the list
- * @ctrl_lli: DMA control register for an lli
- * @ctrl_lli_chained: DMA control register for a chained lli
- */
-struct coh901318_params {
-	u32 config;
-	u32 ctrl_lli_last;
-	u32 ctrl_lli;
-	u32 ctrl_lli_chained;
-};
-/**
- * struct coh_dma_channel - dma channel base
- * @name: ascii name of dma channel
- * @number: channel id number
- * @desc_nbr_max: number of preallocated descriptors
- * @priority_high: prio of channel, 0 low otherwise high.
- * @param: configuration parameters
- * @dev_addr: physical address of periphal connected to channel
- */
-struct coh_dma_channel {
-	const char name[32];
-	const int number;
-	const int desc_nbr_max;
-	const int priority_high;
-	const struct coh901318_params param;
-	const dma_addr_t dev_addr;
-};
-
-/**
- * dma_access_memory_state_t - register dma for memory access
- *
- * @dev: The dma device
- * @active:  1 means dma intends to access memory
- *           0 means dma wont access memory
- */
-typedef void (*dma_access_memory_state_t)(struct device *dev,
-					  bool active);
-
-/**
- * struct powersave - DMA power save structure
- * @lock: lock protecting data in this struct
- * @started_channels: bit mask indicating active dma channels
- */
-struct powersave {
-	spinlock_t lock;
-	u64 started_channels;
-};
-/**
- * struct coh901318_platform - platform arch structure
- * @chans_slave: specifying dma slave channels
- * @chans_memcpy: specifying dma memcpy channels
- * @access_memory_state: requesting DMA memory access (on / off)
- * @chan_conf: dma channel configurations
- * @max_channels: max number of dma chanenls
- */
-struct coh901318_platform {
-	const int *chans_slave;
-	const int *chans_memcpy;
-	const dma_access_memory_state_t access_memory_state;
-	const struct coh_dma_channel *chan_conf;
-	const int max_channels;
-};
-
-#ifdef CONFIG_COH901318
-/**
- * coh901318_filter_id() - DMA channel filter function
- * @chan: dma channel handle
- * @chan_id: id of dma channel to be filter out
- *
- * In dma_request_channel() it specifies what channel id to be requested
- */
-bool coh901318_filter_id(struct dma_chan *chan, void *chan_id);
-#else
-static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id)
-{
-	return false;
-}
-#endif
-
-/*
- * DMA Controller - this access the static mappings of the coh901318 dma.
- *
- */
-
-#define COH901318_MOD32_MASK					(0x1F)
-#define COH901318_WORD_MASK					(0xFFFFFFFF)
-/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
-#define COH901318_INT_STATUS1					(0x0000)
-#define COH901318_INT_STATUS2					(0x0004)
-/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_TC_INT_STATUS1				(0x0008)
-#define COH901318_TC_INT_STATUS2				(0x000C)
-/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
-#define COH901318_TC_INT_CLEAR1					(0x0010)
-#define COH901318_TC_INT_CLEAR2					(0x0014)
-/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_RAW_TC_INT_STATUS1				(0x0018)
-#define COH901318_RAW_TC_INT_STATUS2				(0x001C)
-/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
-#define COH901318_BE_INT_STATUS1				(0x0020)
-#define COH901318_BE_INT_STATUS2				(0x0024)
-/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
-#define COH901318_BE_INT_CLEAR1					(0x0028)
-#define COH901318_BE_INT_CLEAR2					(0x002C)
-/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_RAW_BE_INT_STATUS1				(0x0030)
-#define COH901318_RAW_BE_INT_STATUS2				(0x0034)
-
-/*
- * CX_CFG - Channel Configuration Registers 32bit (R/W)
- */
-#define COH901318_CX_CFG					(0x0100)
-#define COH901318_CX_CFG_SPACING				(0x04)
-/* Channel enable activates tha dma job */
-#define COH901318_CX_CFG_CH_ENABLE				(0x00000001)
-#define COH901318_CX_CFG_CH_DISABLE				(0x00000000)
-/* Request Mode */
-#define COH901318_CX_CFG_RM_MASK				(0x00000006)
-#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY			(0x0 << 1)
-#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY			(0x1 << 1)
-#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY			(0x1 << 1)
-#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY		(0x3 << 1)
-#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY		(0x3 << 1)
-/* Linked channel request field. RM must == 11 */
-#define COH901318_CX_CFG_LCRF_SHIFT				3
-#define COH901318_CX_CFG_LCRF_MASK				(0x000001F8)
-#define COH901318_CX_CFG_LCR_DISABLE				(0x00000000)
-/* Terminal Counter Interrupt Request Mask */
-#define COH901318_CX_CFG_TC_IRQ_ENABLE				(0x00000200)
-#define COH901318_CX_CFG_TC_IRQ_DISABLE				(0x00000000)
-/* Bus Error interrupt Mask */
-#define COH901318_CX_CFG_BE_IRQ_ENABLE				(0x00000400)
-#define COH901318_CX_CFG_BE_IRQ_DISABLE				(0x00000000)
-
-/*
- * CX_STAT - Channel Status Registers 32bit (R/-)
- */
-#define COH901318_CX_STAT					(0x0200)
-#define COH901318_CX_STAT_SPACING				(0x04)
-#define COH901318_CX_STAT_RBE_IRQ_IND				(0x00000008)
-#define COH901318_CX_STAT_RTC_IRQ_IND				(0x00000004)
-#define COH901318_CX_STAT_ACTIVE				(0x00000002)
-#define COH901318_CX_STAT_ENABLED				(0x00000001)
-
-/*
- * CX_CTRL - Channel Control Registers 32bit (R/W)
- */
-#define COH901318_CX_CTRL					(0x0400)
-#define COH901318_CX_CTRL_SPACING				(0x10)
-/* Transfer Count Enable */
-#define COH901318_CX_CTRL_TC_ENABLE				(0x00001000)
-#define COH901318_CX_CTRL_TC_DISABLE				(0x00000000)
-/* Transfer Count Value 0 - 4095 */
-#define COH901318_CX_CTRL_TC_VALUE_MASK				(0x00000FFF)
-/* Burst count */
-#define COH901318_CX_CTRL_BURST_COUNT_MASK			(0x0000E000)
-#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES			(0x7 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES			(0x6 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES			(0x5 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES			(0x4 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES			(0x3 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES			(0x2 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES			(0x1 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE			(0x0 << 13)
-/* Source bus size  */
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK			(0x00030000)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS			(0x2 << 16)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS			(0x1 << 16)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS			(0x0 << 16)
-/* Source address increment */
-#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE			(0x00040000)
-#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE			(0x00000000)
-/* Destination Bus Size */
-#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK			(0x00180000)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS			(0x2 << 19)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS			(0x1 << 19)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS			(0x0 << 19)
-/* Destination address increment */
-#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE			(0x00200000)
-#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE			(0x00000000)
-/* Master Mode (Master2 is only connected to MSL) */
-#define COH901318_CX_CTRL_MASTER_MODE_MASK			(0x00C00000)
-#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W			(0x3 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W			(0x2 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M2RW			(0x1 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M1RW			(0x0 << 22)
-/* Terminal Count flag to PER enable */
-#define COH901318_CX_CTRL_TCP_ENABLE				(0x01000000)
-#define COH901318_CX_CTRL_TCP_DISABLE				(0x00000000)
-/* Terminal Count flags to CPU enable */
-#define COH901318_CX_CTRL_TC_IRQ_ENABLE				(0x02000000)
-#define COH901318_CX_CTRL_TC_IRQ_DISABLE			(0x00000000)
-/* Hand shake to peripheral */
-#define COH901318_CX_CTRL_HSP_ENABLE				(0x04000000)
-#define COH901318_CX_CTRL_HSP_DISABLE				(0x00000000)
-#define COH901318_CX_CTRL_HSS_ENABLE				(0x08000000)
-#define COH901318_CX_CTRL_HSS_DISABLE				(0x00000000)
-/* DMA mode */
-#define COH901318_CX_CTRL_DDMA_MASK				(0x30000000)
-#define COH901318_CX_CTRL_DDMA_LEGACY				(0x0 << 28)
-#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1			(0x1 << 28)
-#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2			(0x2 << 28)
-/* Primary Request Data Destination */
-#define COH901318_CX_CTRL_PRDD_MASK				(0x40000000)
-#define COH901318_CX_CTRL_PRDD_DEST				(0x1 << 30)
-#define COH901318_CX_CTRL_PRDD_SOURCE				(0x0 << 30)
-
-/*
- * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
- */
-#define COH901318_CX_SRC_ADDR					(0x0404)
-#define COH901318_CX_SRC_ADDR_SPACING				(0x10)
-
-/*
- * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
- */
-#define COH901318_CX_DST_ADDR					(0x0408)
-#define COH901318_CX_DST_ADDR_SPACING				(0x10)
-
-/*
- * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
- */
-#define COH901318_CX_LNK_ADDR					(0x040C)
-#define COH901318_CX_LNK_ADDR_SPACING				(0x10)
-#define COH901318_CX_LNK_LINK_IMMEDIATE				(0x00000001)
-#endif /* COH901318_H */
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index 02e6659286d..910698293d6 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -10,9 +10,8 @@
 #include <linux/amba/bus.h>
 #include <linux/spi/spi.h>
 #include <linux/amba/pl022.h>
+#include <linux/platform_data/dma-coh901318.h>
 #include <linux/err.h>
-#include <mach/coh901318.h>
-#include "dma_channels.h"
 
 /*
  * The following is for the actual devices on the SSP/SPI bus
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index 4f990115b1b..7d4616d5df1 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -11,8 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 #include <linux/io.h>
+#include <linux/amba/sp810.h>
 #include <asm/system_misc.h>
-#include <asm/hardware/sp810.h>
 #include <mach/spear.h>
 #include <mach/generic.h>