diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-09 08:39:39 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-09 08:39:39 -0700 |
commit | 97e18dc007546fce8e99098480b921a02ebb3037 (patch) | |
tree | f38c022d034e0172e83f6972983577f790f24dac /arch/arm | |
parent | 042f7b7cbd1e531278a09c449563165ba1f07673 (diff) | |
parent | c67480173f72e883235dd0ad09d90156c8f87600 (diff) |
Merge tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball:
"MMC highlights for 3.15:
Core:
- CONFIG_MMC_UNSAFE_RESUME=y is now default behavior
- DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V
- Add GPIO descriptor based slot-gpio card detect API
Drivers:
- dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c
- mmci: Support HW busy detection on ux500
- omap: Support MMC_ERASE
- omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23
- rtsx: Support pre-req/post-req async
- sdhci: Add support for Realtek RTS5250 controllers
- sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect
- sdhci-msm: Add new driver for Qualcomm SDHCI chipset support
- sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs"
* tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits)
mmc: sdhci-acpi: Intel SDIO has broken card detect
mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller
mmc: sdhci-msm: Add platform_execute_tuning implementation
mmc: sdhci-msm: Initial support for Qualcomm chipsets
mmc: sdhci-msm: Qualcomm SDHCI binding documentation
sdhci: only reprogram retuning timer when flag is set
mmc: rename ARCH_BCM to ARCH_BCM_MOBILE
mmc: sdhci: Allow for irq being shared
mmc: sdhci-acpi: Add device id 80860F16
mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14
mmc: slot-gpio: Add GPIO descriptor based CD GPIO API
mmc: slot-gpio: Split out CD IRQ request into a separate function
mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers
Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"
mmc: sdhci-spear: use generic card detection gpio support
mmc: sdhci-spear: remove support for power gpio
mmc: sdhci-spear: simplify resource handling
mmc: sdhci-spear: fix platform_data usage
mmc: sdhci-spear: fix error handling paths for DT
mmc: sdhci-bcm-kona: fix build errors when built-in
...
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/boot/dts/dra7.dtsi | 17 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap2430.dtsi | 17 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap3-ldp.dts | 23 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap3.dtsi | 17 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap4.dtsi | 17 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap5.dtsi | 17 | ||||
-rw-r--r-- | arch/arm/configs/omap2plus_defconfig | 2 |
7 files changed, 110 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 9e3caf3d19f..1c0f8e1893a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -154,6 +154,22 @@ ti,hwmods = "counter_32k"; }; + dra7_ctrl_general: tisyscon@4a002e00 { + compatible = "syscon"; + reg = <0x4a002e00 0x7c>; + }; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0 0x4>; + syscon = <&dra7_ctrl_general>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + dra7_pmx_core: pinmux@4a003400 { compatible = "pinctrl-single"; reg = <0x4a003400 0x0464>; @@ -543,6 +559,7 @@ dmas = <&sdma 61>, <&sdma 62>; dma-names = "tx", "rx"; status = "disabled"; + pbias-supply = <&pbias_mmc_reg>; }; mmc2: mmc@480b4000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 9d2f028fd68..d09697dab55 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -29,6 +29,22 @@ pinctrl-single,function-mask = <0x3f>; }; + omap2_scm_general: tisyscon@49002270 { + compatible = "syscon"; + reg = <0x49002270 0x240>; + }; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x230 0x4>; + syscon = <&omap2_scm_general>; + pbias_mmc_reg: pbias_mmc_omap2430 { + regulator-name = "pbias_mmc_omap2430"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + gpio1: gpio@4900c000 { compatible = "ti,omap2-gpio"; reg = <0x4900c000 0x200>; @@ -188,6 +204,7 @@ ti,dual-volt; dmas = <&sdma 61>, <&sdma 62>; dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; }; mmc2: mmc@480b4000 { diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index ddce0d807f7..0abe986a4ec 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -174,8 +174,20 @@ }; &mmc1 { + /* See 35xx errata 2.1.1.128 in SPRZ278F */ + compatible = "ti,omap3-pre-es3-hsmmc"; vmmc-supply = <&vmmc1>; bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; + +&mmc2 { + status="disabled"; +}; + +&mmc3 { + status="disabled"; }; &omap3_pmx_core { @@ -209,6 +221,17 @@ 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ >; }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */ + >; + }; }; &usb_otg_hs { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 3d05eff67e2..5e5790f631e 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -181,6 +181,22 @@ pinctrl-single,function-mask = <0xff1f>; }; + omap3_scm_general: tisyscon@48002270 { + compatible = "syscon"; + reg = <0x48002270 0x2f0>; + }; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x2b0 0x4>; + syscon = <&omap3_scm_general>; + pbias_mmc_reg: pbias_mmc_omap2430 { + regulator-name = "pbias_mmc_omap2430"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; reg = <0x48310000 0x200>; @@ -395,6 +411,7 @@ ti,dual-volt; dmas = <&sdma 61>, <&sdma 62>; dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; }; mmc2: mmc@480b4000 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2b4c1cbbce3..27fcac87474 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -191,6 +191,22 @@ pinctrl-single,function-mask = <0x7fff>; }; + omap4_padconf_global: tisyscon@4a1005a0 { + compatible = "syscon"; + reg = <0x4a1005a0 0x170>; + }; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap4_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap4 { + regulator-name = "pbias_mmc_omap4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -427,6 +443,7 @@ ti,needs-special-reset; dmas = <&sdma 61>, <&sdma 62>; dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; }; mmc2: mmc@480b4000 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 19155bb8483..6f3de22fb26 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -198,6 +198,22 @@ pinctrl-single,function-mask = <0x7fff>; }; + omap5_padconf_global: tisyscon@4a002da0 { + compatible = "syscon"; + reg = <0x4A002da0 0xec>; + }; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -480,6 +496,7 @@ ti,needs-special-reset; dmas = <&sdma 61>, <&sdma 62>; dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; }; mmc2: mmc@480b4000 { diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 364ba38e40f..a9667957b75 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -170,6 +170,7 @@ CONFIG_DRA752_THERMAL=y CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_SYSCON=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y @@ -181,6 +182,7 @@ CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_PBIAS=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y |