Merge tag 'mvebu-soc-3.15-2' of git://git.infradead.org/linux-mvebu into next/soc

Merge "mvebu soc changes for v3.15 (incremental pull #2)" from Jason Cooper:

 - mvebu
    - Add Armada 375, 380 and 385 SoCs

 - kirkwood
    - move kirkwood DT support to mach-mvebu
    - add mostly DT support for HP T5325 thin client

* tag 'mvebu-soc-3.15-2' of git://git.infradead.org/linux-mvebu:
  ARM: kirkwood: Add HP T5325 thin client
  ARM: kirkwood: select dtbs based on SoC
  ARM: kirkwood: Remove redundant kexec code
  ARM: mvebu: Armada 375/38x depend on MULTI_V7
  ARM: mvebu: Simplify headers and make local
  ARM: mvebu: Enable mvebu-soc-id on Kirkwood
  ARM: mvebu: Let kirkwood use the system controller for restart
  ARM: mvebu: Move kirkwood DT boards into mach-mvebu
  ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU
  ARM: Fix default CPU selection for ARCH_MULTI_V5
  ARM: MM: Add DT binding for Feroceon L2 cache
  ARM: orion: Move cache-feroceon-l2.h out of plat-orion
  ARM: mvebu: Add ARCH_MULTI_V7 to SoCs
  ARM: kirkwood: ioremap memory control register
  ARM: kirkwood: ioremap the cpu_config register before using it.
  ARM: kirkwood: Separate board-dt from common and pcie code.
  ARM: kirkwood: Drop printing the SoC type and revision
  ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT
  ARM: kirkwood: Give pm.c its own header file.
  ARM: mvebu: Rename the ARCH_MVEBU menu option

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

25 files changed, 666 insertions, 110 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4f13bf3d187..ae5d6152d97 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -898,7 +898,7 @@ config ARCH_MULTI_V5
 	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
 	depends on !ARCH_MULTI_V6_V7
 	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
 		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
 		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4a89023f55a..87c99d3cfa3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -82,8 +82,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+kirkwood := \
+	kirkwood-cloudbox.dtb \
 	kirkwood-db-88f6281.dtb \
 	kirkwood-db-88f6282.dtb \
 	kirkwood-dns320.dtb \
@@ -117,6 +117,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index dc86429756d..2cb0dc52916 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -122,4 +122,66 @@
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0>;
+		dsa,mii-bus = <&ethphy0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@ff {
+		reg = <0xff>; 	/* No phy attached */
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
 };
diff --git a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
index 06f982d5569..12e1588dc4f 100644
--- a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
+++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
@@ -1,5 +1,5 @@
 /*
- * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
+ * arch/arm/include/asm/hardware/cache-feroceon-l2.h
  *
  * Copyright (C) 2008 Marvell Semiconductor
  *
@@ -9,3 +9,5 @@
  */
 
 extern void __init feroceon_l2_init(int l2_wt_override);
+extern int __init feroceon_of_init(void);
+
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index fe8319ad315..df4b26340ae 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -106,13 +106,6 @@ config ARCH_KIRKWOOD_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Kirkwood using flattened device tree.
 
-config MACH_MV88F6281GTW_GE_DT
-	bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
-	depends on ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell 88F6281 GTW GE Board (Flattened Device Tree).
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 144b5110293..3a72c5c6e74 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,5 +1,4 @@
-obj-y				+= common.o pcie.o
-obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o
+obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o common.o pcie.o
 obj-$(CONFIG_PM)		+= pm.o
 
 obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
@@ -13,4 +12,3 @@ obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
-obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT)	+= board-mv88f6281gtw_ge.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 78188159484..2801da49e2a 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -19,11 +19,84 @@
 #include <linux/of_platform.h>
 #include <linux/dma-mapping.h>
 #include <linux/irqchip.h>
-#include <linux/kexec.h>
+#include <asm/hardware/cache-feroceon-l2.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <mach/bridge-regs.h>
 #include <plat/common.h>
-#include "common.h"
+#include <plat/pcie.h>
+#include "pm.h"
+
+static struct map_desc kirkwood_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+		.length		= KIRKWOOD_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init kirkwood_map_io(void)
+{
+	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+static struct resource kirkwood_cpufreq_resources[] = {
+	[0] = {
+		.start  = CPU_CONTROL_PHYS,
+		.end    = CPU_CONTROL_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+	.name		= "kirkwood-cpufreq",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
+	.resource	= kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+	platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= DDR_OPERATION_BASE,
+		.end	= DDR_OPERATION_BASE + 3,
+	},
+};
+
+static struct platform_device kirkwood_cpuidle = {
+	.name		= "kirkwood_cpuidle",
+	.id		= -1,
+	.resource	= kirkwood_cpuidle_resource,
+	.num_resources	= 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+	platform_device_register(&kirkwood_cpuidle);
+}
+
+/* Temporary here since mach-mvebu has a function we can use */
+static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
 
 #define MV643XX_ETH_MAC_ADDR_LOW	0x0414
 #define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
@@ -104,35 +177,35 @@ eth_fixup_skip:
 	}
 }
 
-static void __init kirkwood_dt_init(void)
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+static void __init kirkwood_disable_mbus_error_propagation(void)
 {
-	pr_info("Kirkwood: %s.\n", kirkwood_id());
+	void __iomem *cpu_config;
 
-	/*
-	 * Disable propagation of mbus errors to the CPU local bus,
-	 * as this causes mbus errors (which can occur for example
-	 * for PCI aborts) to throw CPU aborts, which we're not set
-	 * up to deal with.
-	 */
-	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+	cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+	writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+	iounmap(cpu_config);
+}
 
-	BUG_ON(mvebu_mbus_dt_init());
+static void __init kirkwood_dt_init(void)
+{
+	kirkwood_disable_mbus_error_propagation();
 
-	kirkwood_l2_init();
+	BUG_ON(mvebu_mbus_dt_init());
 
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_of_init();
+#endif
 	kirkwood_cpufreq_init();
 	kirkwood_cpuidle_init();
 
 	kirkwood_pm_init();
 	kirkwood_dt_eth_fixup();
 
-#ifdef CONFIG_KEXEC
-	kexec_reinit = kirkwood_enable_pcie;
-#endif
-
-	if (of_machine_is_compatible("marvell,mv88f6281gtw-ge"))
-		mv88f6281gtw_ge_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
deleted file mode 100644
index ee5eea678c1..00000000000
--- a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
- *
- * Marvell 88F6281 GTW GE Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &mv88f6281gtw_ge_switch_chip_data,
-};
-
-void __init mv88f6281gtw_ge_init(void)
-{
-	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
-	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index f3407a5db21..255f33a3903 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -25,10 +25,10 @@
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
+#include <asm/hardware/cache-feroceon-l2.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
 #include <linux/platform_data/asoc-kirkwood.h>
-#include <plat/cache-feroceon-l2.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <linux/platform_data/usb-ehci-orion.h>
@@ -36,6 +36,7 @@
 #include <plat/time.h>
 #include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
+#include "pm.h"
 
 /* These can go away once Kirkwood uses the mvebu-mbus DT binding */
 #define KIRKWOOD_MBUS_NAND_TARGET 0x01
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 05fd648df54..832a4e2ab8d 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,19 +58,6 @@ void kirkwood_cpufreq_init(void);
 void kirkwood_restart(enum reboot_mode, const char *);
 void kirkwood_clk_init(void);
 
-#ifdef CONFIG_PM
-void kirkwood_pm_init(void);
-#else
-static inline void kirkwood_pm_init(void) {};
-#endif
-
-/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
-void mv88f6281gtw_ge_init(void);
-#else
-static inline void mv88f6281gtw_ge_init(void) {};
-#endif
-
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 8b9d1c9ff19..6e5077e2ec2 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -14,6 +14,7 @@
 #include <mach/kirkwood.h>
 
 #define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0100)
+#define CPU_CONFIG_PHYS		(BRIDGE_PHYS_BASE + 0x0100)
 #define CPU_CONFIG_ERROR_PROP	0x00000004
 
 #define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
@@ -79,5 +80,6 @@
 #define CGC_RESERVED		(0x6 << 21)
 
 #define MEMORY_PM_CTRL		(BRIDGE_VIRT_BASE + 0x118)
+#define MEMORY_PM_CTRL_PHYS	(BRIDGE_PHYS_BASE + 0x118)
 
 #endif
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
index c6ab8d9303a..8e5e0329d04 100644
--- a/arch/arm/mach-kirkwood/pm.c
+++ b/arch/arm/mach-kirkwood/pm.c
@@ -21,15 +21,16 @@
 #include "common.h"
 
 static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
 
 static void kirkwood_low_power(void)
 {
 	u32 mem_pm_ctrl;
 
-	mem_pm_ctrl = readl(MEMORY_PM_CTRL);
+	mem_pm_ctrl = readl(memory_pm_ctrl);
 
 	/* Set peripherals to low-power mode */
-	writel_relaxed(~0, MEMORY_PM_CTRL);
+	writel_relaxed(~0, memory_pm_ctrl);
 
 	/* Set DDR in self-refresh */
 	writel_relaxed(0x7, ddr_operation_base);
@@ -41,7 +42,7 @@ static void kirkwood_low_power(void)
 	 */
 	cpu_do_idle();
 
-	writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL);
+	writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
 }
 
 static int kirkwood_suspend_enter(suspend_state_t state)
@@ -69,5 +70,7 @@ static const struct platform_suspend_ops kirkwood_suspend_ops = {
 void __init kirkwood_pm_init(void)
 {
 	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+	memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
 	suspend_set_ops(&kirkwood_suspend_ops);
 }
diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h
new file mode 100644
index 00000000000..21e7530f368
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pm.h
@@ -0,0 +1,26 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 75062eff249..e6ac679bece 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -15,11 +15,11 @@
 #include <linux/ata_platform.h>
 #include <linux/clk-provider.h>
 #include <linux/ethtool.h>
+#include <asm/hardware/cache-feroceon-l2.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/mv78xx0.h>
 #include <mach/bridge-regs.h>
-#include <plat/cache-feroceon-l2.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <plat/time.h>
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index f961ae4ec4e..dd35de74efa 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,5 +1,5 @@
 config ARCH_MVEBU
-	bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+	bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
@@ -14,7 +14,7 @@ config ARCH_MVEBU
 
 if ARCH_MVEBU
 
-menu "Marvell SOC with device tree"
+menu "Marvell EBU SoC variants"
 
 config MACH_MVEBU_V7
 	bool
@@ -22,7 +22,7 @@ config MACH_MVEBU_V7
 	select CACHE_L2X0
 
 config MACH_ARMADA_370
-	bool "Marvell Armada 370 boards"
+	bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
 	select ARMADA_370_CLK
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
@@ -32,7 +32,7 @@ config MACH_ARMADA_370
 	  on the Marvell Armada 370 SoC with device tree.
 
 config MACH_ARMADA_375
-	bool "Marvell Armada 375 boards"
+	bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
@@ -46,7 +46,7 @@ config MACH_ARMADA_375
 	  on the Marvell Armada 375 SoC with device tree.
 
 config MACH_ARMADA_38X
-	bool "Marvell Armada 380/385 boards"
+	bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
@@ -60,7 +60,7 @@ config MACH_ARMADA_38X
 	  on the Marvell Armada 380/385 SoC with device tree.
 
 config MACH_ARMADA_XP
-	bool "Marvell Armada XP boards"
+	bool "Marvell Armada XP boards" if ARCH_MULTI_V7
 	select ARMADA_XP_CLK
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
@@ -69,6 +69,30 @@ config MACH_ARMADA_XP
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada XP SoC with device tree.
 
+config MACH_KIRKWOOD
+	bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
+	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
+	select KIRKWOOD_CLK
+	select OF_IRQ
+	select ORION_IRQCHIP
+	select ORION_TIMER
+	select PCI
+	select PCI_QUIRKS
+	select PINCTRL_KIRKWOOD
+	select USE_OF
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Kirkwood device tree.
+
+config MACH_T5325
+	bool "HP T5325 thin client"
+	depends on MACH_KIRKWOOD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  HP T5325 Thin client
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 2c1db29db2c..bbeb41ee3e7 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -8,3 +8,5 @@ obj-$(CONFIG_MACH_MVEBU_V7)      += board-v7.o
 obj-$(CONFIG_ARCH_MVEBU)	 += coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o
+obj-$(CONFIG_MACH_KIRKWOOD)	 += kirkwood.o kirkwood-pm.o
+obj-$(CONFIG_MACH_T5325)	 += board-t5325.o
diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c
new file mode 100644
index 00000000000..65ace6db9f2
--- /dev/null
+++ b/arch/arm/mach-mvebu/board-t5325.c
@@ -0,0 +1,41 @@
+/*
+ * HP T5325 Board Setup
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <sound/alc5623.h>
+#include "board.h"
+
+static struct platform_device hp_t5325_audio_device = {
+	.name		= "t5325-audio",
+	.id		= -1,
+};
+
+static struct alc5623_platform_data alc5621_data = {
+	.add_ctrl = 0x3700,
+	.jack_det_ctrl = 0x4810,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("alc5621", 0x1a),
+		.platform_data = &alc5621_data,
+	},
+};
+
+void __init t5325_init(void)
+{
+	i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
+	platform_device_register(&hp_t5325_audio_device);
+}
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
new file mode 100644
index 00000000000..de7f0a19139
--- /dev/null
+++ b/arch/arm/mach-mvebu/board.h
@@ -0,0 +1,22 @@
+/*
+ * Board functions for Marvell System On Chip
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MVEBU_BOARD_H
+#define __ARCH_MVEBU_BOARD_H
+
+#ifdef CONFIG_MACH_T5325
+void t5325_init(void);
+#else
+static inline void t5325_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c
new file mode 100644
index 00000000000..cbb816f2120
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.c
@@ -0,0 +1,76 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include "kirkwood.h"
+
+static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
+
+static void kirkwood_low_power(void)
+{
+	u32 mem_pm_ctrl;
+
+	mem_pm_ctrl = readl(memory_pm_ctrl);
+
+	/* Set peripherals to low-power mode */
+	writel_relaxed(~0, memory_pm_ctrl);
+
+	/* Set DDR in self-refresh */
+	writel_relaxed(0x7, ddr_operation_base);
+
+	/*
+	 * Set CPU in wait-for-interrupt state.
+	 * This disables the CPU core clocks,
+	 * the array clocks, and also the L2 controller.
+	 */
+	cpu_do_idle();
+
+	writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		kirkwood_low_power();
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+	.enter = kirkwood_suspend_enter,
+	.valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+	memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
+	suspend_set_ops(&kirkwood_suspend_ops);
+	return 0;
+}
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h
new file mode 100644
index 00000000000..21e7530f368
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.h
@@ -0,0 +1,26 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
new file mode 100644
index 00000000000..120207fc36f
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-mvebu/kirkwood.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include "kirkwood.h"
+#include "kirkwood-pm.h"
+#include "common.h"
+#include "board.h"
+
+static struct resource kirkwood_cpufreq_resources[] = {
+	[0] = {
+		.start  = CPU_CONTROL_PHYS,
+		.end    = CPU_CONTROL_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+	.name		= "kirkwood-cpufreq",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
+	.resource	= kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+	platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= DDR_OPERATION_BASE,
+		.end	= DDR_OPERATION_BASE + 3,
+	},
+};
+
+static struct platform_device kirkwood_cpuidle = {
+	.name		= "kirkwood_cpuidle",
+	.id		= -1,
+	.resource	= kirkwood_cpuidle_resource,
+	.num_resources	= 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+	platform_device_register(&kirkwood_cpuidle);
+}
+
+#define MV643XX_ETH_MAC_ADDR_LOW	0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
+{
+	struct device_node *np;
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by u-boot
+	 * if the clocks are turned off. Usually, u-boot on kirkwood boards
+	 * has no DT support to properly set local-mac-address property.
+	 * As a workaround, we get the MAC address from mv643xx_eth registers
+	 * and update the port device node if no valid MAC address is set.
+	 */
+	for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+		struct device_node *pnp = of_get_parent(np);
+		struct clk *clk;
+		struct property *pmac;
+		void __iomem *io;
+		u8 *macaddr;
+		u32 reg;
+
+		if (!pnp)
+			continue;
+
+		/* skip disabled nodes or nodes with valid MAC address*/
+		if (!of_device_is_available(pnp) || of_get_mac_address(np))
+			goto eth_fixup_skip;
+
+		clk = of_clk_get(pnp, 0);
+		if (IS_ERR(clk))
+			goto eth_fixup_skip;
+
+		io = of_iomap(pnp, 0);
+		if (!io)
+			goto eth_fixup_no_map;
+
+		/* ensure port clock is not gated to not hang CPU */
+		clk_prepare_enable(clk);
+
+		/* store MAC address register contents in local-mac-address */
+		pr_err(FW_INFO "%s: local-mac-address is not set\n",
+		       np->full_name);
+
+		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+		if (!pmac)
+			goto eth_fixup_no_mem;
+
+		pmac->value = pmac + 1;
+		pmac->length = 6;
+		pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+		if (!pmac->name) {
+			kfree(pmac);
+			goto eth_fixup_no_mem;
+		}
+
+		macaddr = pmac->value;
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+		macaddr[0] = (reg >> 24) & 0xff;
+		macaddr[1] = (reg >> 16) & 0xff;
+		macaddr[2] = (reg >> 8) & 0xff;
+		macaddr[3] = reg & 0xff;
+
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+		macaddr[4] = (reg >> 8) & 0xff;
+		macaddr[5] = reg & 0xff;
+
+		of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+		iounmap(io);
+		clk_disable_unprepare(clk);
+eth_fixup_no_map:
+		clk_put(clk);
+eth_fixup_skip:
+		of_node_put(pnp);
+	}
+}
+
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+void kirkwood_disable_mbus_error_propagation(void)
+{
+	void __iomem *cpu_config;
+
+	cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+	writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+}
+
+static struct of_dev_auxdata auxdata[] __initdata = {
+	OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
+		       "mvebu-audio", NULL),
+	{ /* sentinel */ }
+};
+
+static void __init kirkwood_dt_init(void)
+{
+	kirkwood_disable_mbus_error_propagation();
+
+	BUG_ON(mvebu_mbus_dt_init());
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_of_init();
+#endif
+	kirkwood_cpufreq_init();
+	kirkwood_cpuidle_init();
+
+	kirkwood_pm_init();
+	kirkwood_dt_eth_fixup();
+
+	if (of_machine_is_compatible("hp,t5325"))
+		t5325_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] = {
+	"marvell,kirkwood",
+	NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+	.init_machine	= kirkwood_dt_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= kirkwood_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h
new file mode 100644
index 00000000000..89f3d1f5164
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-mvebu/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KIRKWOOD_REGS_PHYS_BASE	0xf1000000
+#define DDR_PHYS_BASE           (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define DDR_OPERATION_BASE	(DDR_PHYS_BASE + 0x1418)
+
+#define CPU_CONFIG_PHYS		(BRIDGE_PHYS_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP	0x00000004
+
+#define CPU_CONTROL_PHYS	(BRIDGE_PHYS_BASE + 0x0104)
+#define MEMORY_PM_CTRL_PHYS	(BRIDGE_PHYS_BASE + 0x0118)
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
index f3b325f6cbd..f3d4cf53f74 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -38,6 +38,7 @@ static bool is_id_valid;
 static const struct of_device_id mvebu_pcie_of_match_table[] = {
 	{ .compatible = "marvell,armada-xp-pcie", },
 	{ .compatible = "marvell,armada-370-pcie", },
+	{ .compatible = "marvell,kirkwood-pcie" },
 	{},
 };
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1f8fed94c2a..dccd7e17765 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -855,7 +855,7 @@ config OUTER_CACHE_SYNC
 
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
-	depends on ARCH_KIRKWOOD || ARCH_MV78XX0
+	depends on ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_MVEBU
 	default y
 	select OUTER_CACHE
 	help
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 48bc3c0a87c..8dc1a2b5a8e 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -13,10 +13,15 @@
  */
 
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/highmem.h>
+#include <linux/io.h>
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
-#include <plat/cache-feroceon-l2.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+
+#define L2_WRITETHROUGH_KIRKWOOD	BIT(4)
 
 /*
  * Low-level cache maintenance operations.
@@ -350,3 +355,41 @@ void __init feroceon_l2_init(int __l2_wt_override)
 	printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
 			 l2_wt_override ? ", in WT override mode" : "");
 }
+#ifdef CONFIG_OF
+static const struct of_device_id feroceon_ids[] __initconst = {
+	{ .compatible = "marvell,kirkwood-cache"},
+	{ .compatible = "marvell,feroceon-cache"},
+	{}
+};
+
+int __init feroceon_of_init(void)
+{
+	struct device_node *node;
+	void __iomem *base;
+	bool l2_wt_override = false;
+	struct resource res;
+
+#if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
+	l2_wt_override = true;
+#endif
+
+	node = of_find_matching_node(NULL, feroceon_ids);
+	if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) {
+		if (of_address_to_resource(node, 0, &res))
+			return -ENODEV;
+
+		base = ioremap(res.start, resource_size(&res));
+		if (!base)
+			return -ENOMEM;
+
+		if (l2_wt_override)
+			writel(readl(base) | L2_WRITETHROUGH_KIRKWOOD, base);
+		else
+			writel(readl(base) & ~L2_WRITETHROUGH_KIRKWOOD, base);
+	}
+
+	feroceon_l2_init(l2_wt_override);
+
+	return 0;
+}
+#endif