Merge tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

Merge "Samsung cleanup for v3.17" from Kukjin Kim:

Most of them are for exynos SoCs, remove useless codes and update for
PMU consolidation.

- remove unnecessary header file in mach-exynos/pmu.c
- remove unused code in mach-exynos/common.h
- remove mach-exynos/regs-pmu.h dependency from PD
- remove file path from comment section in mach-exynos

- move SYSREG definitions into mach-exynos/regs-sys.h

- add mapping PMU base address via DT for PMU cleanup

- use staic in mach-exynos/common.h
- update Samsung UART config options for low-level debug

* tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Add support for mapping PMU base address via DT
  ARM: EXYNOS: Remove "linux/bug.h" from pmu.c
  ARM: EXYNOS: Remove regs-pmu.h header dependency from pm_domain
  ARM: EXYNOS: Remove file path from comment section
  ARM: EXYNOS: Move SYSREG definition into sys-reg specific file
  ARM: EXYNOS: Make exynos machine_ops as static
  ARM: EXYNOS: Remove unused code in common.h
  ARM: debug: Update Samsung UART config options
  + Linux 3.16-rc5

Signed-off-by: Olof Johansson <olof@lixom.net>

35 files changed, 263 insertions, 125 deletions

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a9176b9b00f..b24b5dc720e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -617,53 +617,41 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
-		bool "Use S3C UART 0 for low-level debug"
+		bool "Use Samsung S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART 0. The port must have been initialised
 		  by the boot-loader before use.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
-		bool "Use S3C UART 1 for low-level debug"
+		bool "Use Samsung S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART 1. The port must have been initialised
 		  by the boot-loader before use.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
-		bool "Use S3C UART 2 for low-level debug"
+		bool "Use Samsung S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART 2. The port must have been initialised
 		  by the boot-loader before use.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 	config DEBUG_S3C_UART3
 		depends on PLAT_SAMSUNG && ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART
-		bool "Use S3C UART 3 for low-level debug"
+		bool "Use Samsung S3C UART 3 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 	config DEBUG_S3C2410_UART0
 		depends on ARCH_S3C24XX
 		select DEBUG_S3C2410_UART
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index ecb267767cf..e2156a583de 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -529,8 +529,8 @@
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 1 2
 		>;
-		tx-num-evt = <1>;
-		rx-num-evt = <1>;
+		tx-num-evt = <32>;
+		rx-num-evt = <32>;
 };
 
 &tps {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index ab9a34ce524..80a3b215e7d 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -560,8 +560,8 @@
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 1 2
 		>;
-		tx-num-evt = <1>;
-		rx-num-evt = <1>;
+		tx-num-evt = <32>;
+		rx-num-evt = <32>;
 };
 
 &tscadc {
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 8a0a72dc7dd..a1a0cc5eb35 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -105,10 +105,16 @@
 
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rmii";
 };
 
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+};
+
+&phy_sel {
+	rmii-clock-ext;
 };
 
 &elm {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index d6133f49720..2ebc42140ea 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1045,6 +1045,8 @@
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&usb>, <&udphs_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 
 				ep0 {
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 4adc28039c3..83089540e32 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -240,6 +240,7 @@
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
 					regulator-boot-on;
 				};
 
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index c90c76de84d..dc7a292fe93 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -673,10 +673,12 @@
 
 	l3_iclk_div: l3_iclk_div {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x0100>;
 		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
+		ti,index-power-of-two;
 	};
 
 	l4_root_clk_div: l4_root_clk_div {
@@ -684,7 +686,7 @@
 		compatible = "fixed-factor-clock";
 		clocks = <&l3_iclk_div>;
 		clock-mult = <1>;
-		clock-div = <1>;
+		clock-div = <2>;
 	};
 
 	video1_clk2_div: video1_clk2_div {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index fbaf426d2da..17b22e9cc2a 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -554,7 +554,7 @@
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
 		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index e38532271ef..15957227ffd 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -167,7 +167,7 @@
 		compatible = "samsung,exynos5420-audss-clock";
 		reg = <0x03810000 0x0C>;
 		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
 			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
 		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
@@ -260,6 +260,9 @@
 	mfc_pd: power-domain@10044060 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044060 0x20>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
+			<&clock CLK_MOUT_USER_ACLK333>;
+		clock-names = "oscclk", "pclk0", "clk0";
 	};
 
 	disp_pd: power-domain@100440C0 {
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index 9db4b659d03..cb1424240ff 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void)
 	TEST_RRR( op "lt" s "	r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
 	TEST_RR(  op "gt" s "	r12, r13"       ", r",14,val, ", ror r",14,7,"")\
 	TEST_RR(  op "le" s "	r14, r",0, val, ", r13"       ", lsl r",14,8,"")\
-	TEST_RR(  op s "	r12, pc"        ", r",14,val, ", ror r",14,7,"")\
-	TEST_RR(  op s "	r14, r",0, val, ", pc"        ", lsl r",14,8,"")\
 	TEST_R(   op "eq" s "	r0,  r",11,VAL1,", #0xf5")			\
 	TEST_R(   op "ne" s "	r11, r",0, VAL1,", #0xf5000000")		\
 	TEST_R(   op s "	r7,  r",8, VAL2,", #0x000af000")		\
@@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void)
 	TEST_RRR( op "ge	r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")	\
 	TEST_RR(  op "le	r13"       ", r",14,val, ", ror r",14,7,"")	\
 	TEST_RR(  op "gt	r",0, val, ", r13"       ", lsl r",14,8,"")	\
-	TEST_RR(  op "	pc"        ", r",14,val, ", ror r",14,7,"")		\
-	TEST_RR(  op "	r",0, val, ", pc"        ", lsl r",14,8,"")		\
 	TEST_R(   op "eq	r",11,VAL1,", #0xf5")				\
 	TEST_R(   op "ne	r",0, VAL1,", #0xf5000000")			\
 	TEST_R(   op "	r",8, VAL2,", #0x000af000")
@@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void)
 	TEST_RR(  op "ge" s "	r11, r",11,N(val),", asr r",7, 6,"")	\
 	TEST_RR(  op "lt" s "	r12, r",11,val, ", ror r",14,7,"")	\
 	TEST_R(   op "gt" s "	r14, r13"       ", lsl r",14,8,"")	\
-	TEST_R(   op "le" s "	r14, pc"        ", lsl r",14,8,"")	\
 	TEST(     op "eq" s "	r0,  #0xf5")				\
 	TEST(     op "ne" s "	r11, #0xf5000000")			\
 	TEST(     op s "	r7,  #0x000af000")			\
@@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void)
 	TEST_SUPPORTED("cmp	pc, #0x1000");
 	TEST_SUPPORTED("cmp	sp, #0x1000");
 
-	/* Data-processing with PC as shift*/
+	/* Data-processing with PC and a shift count in a register */
 	TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) "	@ cmp	r12, r14, asl pc")
 	TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) "	@ mov	r12, r14, asl pc")
 	TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) "	@ add	r10, r12, r14, asl pc")
-
-	/* Data-processing with PC as shift*/
+	TEST_UNSUPPORTED(__inst_arm(0xe151021f) "	@ cmp	r1, pc, lsl r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe17f0211) "	@ cmn	pc, r1, lsl r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) "	@ mov	r1, pc, lsl r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) "	@ mov	pc, r1, lsl r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe042131f) "	@ sub	r1, r2, pc, lsl r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) "	@ bic	r1, pc, r2, lsl r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe081f312) "	@ add	pc, r1, r2, lsl r3")
+
+	/* Data-processing with PC as a target and status registers updated */
 	TEST_UNSUPPORTED("movs	pc, r1")
 	TEST_UNSUPPORTED("movs	pc, r1, lsl r2")
 	TEST_UNSUPPORTED("movs	pc, #0x10000")
@@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void)
 	TEST_BF_R ("add	pc, pc, r",14,2f-1f-8,"")
 	TEST_BF_R ("add	pc, r",14,2f-1f-8,", pc")
 	TEST_BF_R ("mov	pc, r",0,2f,"")
-	TEST_BF_RR("mov	pc, r",0,2f,", asl r",1,0,"")
+	TEST_BF_R ("add	pc, pc, r",14,(2f-1f-8)*2,", asr #1")
 	TEST_BB(   "sub	pc, pc, #1b-2b+8")
 #if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
 	TEST_BB(   "sub	pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
 #endif
 	TEST_BB_R( "sub	pc, pc, r",14, 1f-2f+8,"")
 	TEST_BB_R( "rsb	pc, r",14,1f-2f+8,", pc")
-	TEST_RR(   "add	pc, pc, r",10,-2,", asl r",11,1,"")
+	TEST_R(    "add	pc, pc, r",10,-2,", asl #1")
 #ifdef CONFIG_THUMB2_KERNEL
 	TEST_ARM_TO_THUMB_INTERWORK_R("add	pc, pc, r",0,3f-1f-8+1,"")
 	TEST_ARM_TO_THUMB_INTERWORK_R("sub	pc, r",0,3f+8+1,", #8")
@@ -216,6 +218,7 @@ void kprobe_arm_test_cases(void)
 	TEST_BB_R("bx	r",7,2f,"")
 	TEST_BF_R("bxeq	r",14,2f,"")
 
+#if __LINUX_ARM_ARCH__ >= 5
 	TEST_R("clz	r0, r",0, 0x0,"")
 	TEST_R("clzeq	r7, r",14,0x1,"")
 	TEST_R("clz	lr, r",7, 0xffffffff,"")
@@ -337,6 +340,7 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2")
 	TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2")
 	TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc")
+#endif
 
 	TEST_GROUP("Multiply and multiply-accumulate")
 
@@ -559,6 +563,7 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED("ldrsht	r1, [r2], #48")
 #endif
 
+#if __LINUX_ARM_ARCH__ >= 5
 	TEST_RPR(  "strd	r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
 	TEST_RPR(  "strccd	r",8, VAL2,", [r",13,0, ", r",12,48,"]")
 	TEST_RPR(  "strd	r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
@@ -595,6 +600,7 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) "	@ ldrd r12, [pc, #48]!")
 	TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) "	@ ldrd pc, [r9], #48")
 	TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) "	@ ldrd lr, [r9], #48")
+#endif
 
 	TEST_GROUP("Miscellaneous")
 
@@ -1227,7 +1233,9 @@ void kprobe_arm_test_cases(void)
 	TEST_COPROCESSOR( "mrc"two"	0, 0, r0, cr0, cr0, 0")
 
 	COPROCESSOR_INSTRUCTIONS_ST_LD("",e)
+#if __LINUX_ARM_ARCH__ >= 5
 	COPROCESSOR_INSTRUCTIONS_MC_MR("",e)
+#endif
 	TEST_UNSUPPORTED("svc	0")
 	TEST_UNSUPPORTED("svc	0xffffff")
 
@@ -1287,7 +1295,9 @@ void kprobe_arm_test_cases(void)
 	TEST(	"blx	__dummy_thumb_subroutine_odd")
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
+#if __LINUX_ARM_ARCH__ >= 5
 	COPROCESSOR_INSTRUCTIONS_ST_LD("2",f)
+#endif
 #if __LINUX_ARM_ARCH__ >= 6
 	COPROCESSOR_INSTRUCTIONS_MC_MR("2",f)
 #endif
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
index 379639998d5..08d731294bc 100644
--- a/arch/arm/kernel/kprobes-test.c
+++ b/arch/arm/kernel/kprobes-test.c
@@ -225,6 +225,7 @@ static int pre_handler_called;
 static int post_handler_called;
 static int jprobe_func_called;
 static int kretprobe_handler_called;
+static int tests_failed;
 
 #define FUNC_ARG1 0x12345678
 #define FUNC_ARG2 0xabcdef
@@ -461,6 +462,13 @@ static int run_api_tests(long (*func)(long, long))
 
 	pr_info("    jprobe\n");
 	ret = test_jprobe(func);
+#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE)
+	if (ret == -EINVAL) {
+		pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n");
+		tests_failed = ret;
+		ret = 0;
+	}
+#endif
 	if (ret < 0)
 		return ret;
 
@@ -1672,6 +1680,8 @@ static int __init run_all_tests(void)
 
 out:
 	if (ret == 0)
+		ret = tests_failed;
+	if (ret == 0)
 		pr_info("Finished kprobe tests OK\n");
 	else
 		pr_err("kprobe tests failed\n");
diff --git a/arch/arm/kernel/probes-arm.c b/arch/arm/kernel/probes-arm.c
index 51a13a02798..8eaef81d834 100644
--- a/arch/arm/kernel/probes-arm.c
+++ b/arch/arm/kernel/probes-arm.c
@@ -341,12 +341,12 @@ static const union decode_item arm_cccc_000x_table[] = {
 	/* CMP (reg-shift reg)	cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */
 	/* CMN (reg-shift reg)	cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */
 	DECODE_EMULATEX	(0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG,
-						 REGS(ANY, 0, NOPC, 0, ANY)),
+						 REGS(NOPC, 0, NOPC, 0, NOPC)),
 
 	/* MOV (reg-shift reg)	cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */
 	/* MVN (reg-shift reg)	cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */
 	DECODE_EMULATEX	(0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG,
-						 REGS(0, ANY, NOPC, 0, ANY)),
+						 REGS(0, NOPC, NOPC, 0, NOPC)),
 
 	/* AND (reg-shift reg)	cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */
 	/* EOR (reg-shift reg)	cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */
@@ -359,7 +359,7 @@ static const union decode_item arm_cccc_000x_table[] = {
 	/* ORR (reg-shift reg)	cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */
 	/* BIC (reg-shift reg)	cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */
 	DECODE_EMULATEX	(0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG,
-						 REGS(ANY, ANY, NOPC, 0, ANY)),
+						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
 
 	DECODE_END
 };
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 1ee91763fa7..f8daa9cc561 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -111,25 +111,14 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 #define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
 			  soc_is_exynos5420() || soc_is_exynos5800())
 
-void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
-
-struct map_desc;
 extern void __iomem *sysram_ns_base_addr;
 extern void __iomem *sysram_base_addr;
-void exynos_init_io(void);
-void exynos_restart(enum reboot_mode mode, const char *cmd);
+extern void __iomem *pmu_base_addr;
 void exynos_sysram_init(void);
-void exynos_cpuidle_init(void);
-void exynos_cpufreq_init(void);
-void exynos_init_late(void);
 
 void exynos_firmware_init(void);
 
-#ifdef CONFIG_PINCTRL_EXYNOS
 extern u32 exynos_get_eint_wake_mask(void);
-#else
-static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
-#endif
 
 #ifdef CONFIG_PM_SLEEP
 extern void __init exynos_pm_init(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index f38cf7c110c..80cbbc74d2c 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -19,6 +19,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
+#include <linux/irqchip.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -29,6 +30,9 @@
 #include "common.h"
 #include "mfc.h"
 #include "regs-pmu.h"
+#include "regs-sys.h"
+
+void __iomem *pmu_base_addr;
 
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
@@ -143,7 +147,7 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 	},
 };
 
-void exynos_restart(enum reboot_mode mode, const char *cmd)
+static void exynos_restart(enum reboot_mode mode, const char *cmd)
 {
 	struct device_node *np;
 	u32 val = 0x1;
@@ -173,10 +177,8 @@ static struct platform_device exynos_cpuidle = {
 
 void __init exynos_cpuidle_init(void)
 {
-	if (soc_is_exynos5440())
-		return;
-
-	platform_device_register(&exynos_cpuidle);
+	if (soc_is_exynos4210() || soc_is_exynos5250())
+		platform_device_register(&exynos_cpuidle);
 }
 
 void __init exynos_cpufreq_init(void)
@@ -206,7 +208,7 @@ void __init exynos_sysram_init(void)
 	}
 }
 
-void __init exynos_init_late(void)
+static void __init exynos_init_late(void)
 {
 	if (of_machine_is_compatible("samsung,exynos5440"))
 		/* to be supported later */
@@ -253,7 +255,7 @@ static void __init exynos_map_io(void)
 		iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
 }
 
-void __init exynos_init_io(void)
+static void __init exynos_init_io(void)
 {
 	debug_ll_io_init();
 
@@ -265,6 +267,39 @@ void __init exynos_init_io(void)
 	exynos_map_io();
 }
 
+static const struct of_device_id exynos_dt_pmu_match[] = {
+	{ .compatible = "samsung,exynos3250-pmu" },
+	{ .compatible = "samsung,exynos4210-pmu" },
+	{ .compatible = "samsung,exynos4212-pmu" },
+	{ .compatible = "samsung,exynos4412-pmu" },
+	{ .compatible = "samsung,exynos5250-pmu" },
+	{ .compatible = "samsung,exynos5420-pmu" },
+	{ /*sentinel*/ },
+};
+
+static void exynos_map_pmu(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, exynos_dt_pmu_match);
+	if (np)
+		pmu_base_addr = of_iomap(np, 0);
+
+	if (!pmu_base_addr)
+		panic("failed to find exynos pmu register\n");
+}
+
+static void __init exynos_init_irq(void)
+{
+	irqchip_init();
+	/*
+	 * Since platsmp.c needs pmu base address by the time
+	 * DT is not unflatten so we can't use DT APIs before
+	 * init_irq
+	 */
+	exynos_map_pmu();
+}
+
 static void __init exynos_dt_machine_init(void)
 {
 	struct device_node *i2c_np;
@@ -297,7 +332,7 @@ static void __init exynos_dt_machine_init(void)
 	 * This is called from smp_prepare_cpus if we've built for SMP, but
 	 * we still need to set it up for PM and firmware ops if not.
 	 */
-	if (!IS_ENABLED(SMP))
+	if (!IS_ENABLED(CONFIG_SMP))
 		exynos_sysram_init();
 
 	exynos_cpuidle_init();
@@ -345,6 +380,7 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos_init_io,
 	.init_early	= exynos_firmware_init,
+	.init_irq	= exynos_init_irq,
 	.init_machine	= exynos_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.dt_compat	= exynos_dt_compat,
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index eb91d2350f8..e8797bb7887 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 
 	boot_reg = sysram_ns_base_addr + 0x1c;
 
-	if (!soc_is_exynos4212() && !soc_is_exynos3250())
-		boot_reg += 4*cpu;
+	/*
+	 * Almost all Exynos-series of SoCs that run in secure mode don't need
+	 * additional offset for every CPU, with Exynos4412 being the only
+	 * exception.
+	 */
+	if (soc_is_exynos4412())
+		boot_reg += 4 * cpu;
 
 	__raw_writel(boot_addr, boot_reg);
 	return 0;
diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S
index cdd9d91e993..b54f9701e42 100644
--- a/arch/arm/mach-exynos/headsmp.S
+++ b/arch/arm/mach-exynos/headsmp.S
@@ -1,5 +1,4 @@
 /*
- *  linux/arch/arm/mach-exynos4/headsmp.S
  *
  *  Cloned from linux/arch/arm/mach-realview/headsmp.S
  *
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 8a134d019cb..572f6b1a08f 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -1,5 +1,4 @@
-/* linux arch/arm/mach-exynos4/hotplug.c
- *
+/*
  *  Cloned from linux/arch/arm/mach-realview/hotplug.c
  *
  *  Copyright (C) 2002 ARM Ltd.
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 548269a6063..963002fb15c 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos/include/mach/map.h
- *
+/*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
index 2a4cdb7cb32..e19df1f18c0 100644
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ b/arch/arm/mach-exynos/include/mach/memory.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos4/include/mach/memory.h
- *
+/*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 1c8d31e3952..39ad38f561f 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos4/platsmp.c
- *
+ /*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 202ca73e49c..f127c0cefbb 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -35,6 +35,7 @@
 
 #include "common.h"
 #include "regs-pmu.h"
+#include "regs-sys.h"
 
 /**
  * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index fe6570ebbdd..fd76e1b5a47 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -17,12 +17,14 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/pm_domain.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/sched.h>
 
-#include "regs-pmu.h"
+#define INT_LOCAL_PWR_EN	0x7
+#define MAX_CLK_PER_DOMAIN	4
 
 /*
  * Exynos specific wrapper around the generic power domain
@@ -32,6 +34,9 @@ struct exynos_pm_domain {
 	char const *name;
 	bool is_off;
 	struct generic_pm_domain pd;
+	struct clk *oscclk;
+	struct clk *clk[MAX_CLK_PER_DOMAIN];
+	struct clk *pclk[MAX_CLK_PER_DOMAIN];
 };
 
 static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
@@ -44,13 +49,26 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 	pd = container_of(domain, struct exynos_pm_domain, pd);
 	base = pd->base;
 
-	pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
+	/* Set oscclk before powering off a domain*/
+	if (!power_on) {
+		int i;
+
+		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+			if (IS_ERR(pd->clk[i]))
+				break;
+			if (clk_set_parent(pd->clk[i], pd->oscclk))
+				pr_err("%s: error setting oscclk as parent to clock %d\n",
+						pd->name, i);
+		}
+	}
+
+	pwr = power_on ? INT_LOCAL_PWR_EN : 0;
 	__raw_writel(pwr, base);
 
 	/* Wait max 1ms */
 	timeout = 10;
 
-	while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN)	!= pwr) {
+	while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
 		if (!timeout) {
 			op = (power_on) ? "enable" : "disable";
 			pr_err("Power domain %s %s failed\n", domain->name, op);
@@ -60,6 +78,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 		cpu_relax();
 		usleep_range(80, 100);
 	}
+
+	/* Restore clocks after powering on a domain*/
+	if (power_on) {
+		int i;
+
+		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+			if (IS_ERR(pd->clk[i]))
+				break;
+			if (clk_set_parent(pd->clk[i], pd->pclk[i]))
+				pr_err("%s: error setting parent to clock%d\n",
+						pd->name, i);
+		}
+	}
+
 	return 0;
 }
 
@@ -152,9 +184,11 @@ static __init int exynos4_pm_init_power_domain(void)
 
 	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
 		struct exynos_pm_domain *pd;
-		int on;
+		int on, i;
+		struct device *dev;
 
 		pdev = of_find_device_by_node(np);
+		dev = &pdev->dev;
 
 		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
 		if (!pd) {
@@ -170,9 +204,33 @@ static __init int exynos4_pm_init_power_domain(void)
 		pd->pd.power_on = exynos_pd_power_on;
 		pd->pd.of_node = np;
 
+		pd->oscclk = clk_get(dev, "oscclk");
+		if (IS_ERR(pd->oscclk))
+			goto no_clk;
+
+		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+			char clk_name[8];
+
+			snprintf(clk_name, sizeof(clk_name), "clk%d", i);
+			pd->clk[i] = clk_get(dev, clk_name);
+			if (IS_ERR(pd->clk[i]))
+				break;
+			snprintf(clk_name, sizeof(clk_name), "pclk%d", i);
+			pd->pclk[i] = clk_get(dev, clk_name);
+			if (IS_ERR(pd->pclk[i])) {
+				clk_put(pd->clk[i]);
+				pd->clk[i] = ERR_PTR(-EINVAL);
+				break;
+			}
+		}
+
+		if (IS_ERR(pd->clk[0]))
+			clk_put(pd->oscclk);
+
+no_clk:
 		platform_set_drvdata(pdev, pd);
 
-		on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+		on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN;
 
 		pm_genpd_init(&pd->pd, NULL, !on);
 	}
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index fb0deda3b3a..dcfcb44c3c5 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -11,7 +11,6 @@
 
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/bug.h>
 
 #include "common.h"
 #include "regs-pmu.h"
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 1d13b08708f..1993e6bd538 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -15,7 +15,6 @@
 #include <mach/map.h>
 
 #define S5P_PMUREG(x)				(S5P_VA_PMU + (x))
-#define S5P_SYSREG(x)				(S3C_VA_SYS + (x))
 
 #define S5P_CENTRAL_SEQ_CONFIGURATION		S5P_PMUREG(0x0200)
 
@@ -127,7 +126,6 @@
 #define S5P_PAD_RET_EBIB_OPTION			S5P_PMUREG(0x31A8)
 
 #define S5P_CORE_LOCAL_PWR_EN			0x3
-#define S5P_INT_LOCAL_PWR_EN			0x7
 
 /* Only for EXYNOS4210 */
 #define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
@@ -188,8 +186,6 @@
 
 /* For EXYNOS5 */
 
-#define EXYNOS5_SYS_I2C_CFG					S5P_SYSREG(0x0234)
-
 #define EXYNOS5_AUTO_WDTRESET_DISABLE				S5P_PMUREG(0x0408)
 #define EXYNOS5_MASK_WDTRESET_REQUEST				S5P_PMUREG(0x040C)
 
diff --git a/arch/arm/mach-exynos/regs-sys.h b/arch/arm/mach-exynos/regs-sys.h
new file mode 100644
index 00000000000..84332b0dd7a
--- /dev/null
+++ b/arch/arm/mach-exynos/regs-sys.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * EXYNOS - system register definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_SYS_H
+#define __ASM_ARCH_REGS_SYS_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SYSREG(x)                          (S3C_VA_SYS + (x))
+
+/* For EXYNOS5 */
+#define EXYNOS5_SYS_I2C_CFG                    S5P_SYSREG(0x0234)
+
+#endif /* __ASM_ARCH_REGS_SYS_H */
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
index 4ba587da89d..84acdfd1d71 100644
--- a/arch/arm/mach-imx/clk-gate2.c
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw)
 
 	spin_lock_irqsave(gate->lock, flags);
 
-	if (gate->share_count && --(*gate->share_count) > 0)
-		goto out;
+	if (gate->share_count) {
+		if (WARN_ON(*gate->share_count == 0))
+			goto out;
+		else if (--(*gate->share_count) > 0)
+			goto out;
+	}
 
 	reg = readl(gate->reg);
 	reg &= ~(3 << gate->bit_idx);
@@ -78,19 +82,26 @@ out:
 	spin_unlock_irqrestore(gate->lock, flags);
 }
 
-static int clk_gate2_is_enabled(struct clk_hw *hw)
+static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
 {
-	u32 reg;
-	struct clk_gate2 *gate = to_clk_gate2(hw);
+	u32 val = readl(reg);
 
-	reg = readl(gate->reg);
-
-	if (((reg >> gate->bit_idx) & 1) == 1)
+	if (((val >> bit_idx) & 1) == 1)
 		return 1;
 
 	return 0;
 }
 
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+	struct clk_gate2 *gate = to_clk_gate2(hw);
+
+	if (gate->share_count)
+		return !!(*gate->share_count);
+	else
+		return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
+}
+
 static struct clk_ops clk_gate2_ops = {
 	.enable = clk_gate2_enable,
 	.disable = clk_gate2_disable,
@@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
 	gate->bit_idx = bit_idx;
 	gate->flags = clk_gate2_flags;
 	gate->lock = lock;
+
+	/* Initialize share_count per hardware state */
+	if (share_count)
+		*share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0;
 	gate->share_count = share_count;
 
 	init.name = name;
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 332af927f4d..67fd26a1844 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -76,7 +76,7 @@
  * (assuming that it is counting N upwards), or -2 if the enclosing loop
  * should skip to the next iteration (again assuming N is increasing).
  */
-static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
 {
 	struct dpll_data *dd;
 	long fint, fint_min, fint_max;
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 04dab2fcf86..ee6c784cd6b 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -26,11 +26,14 @@
 #define OMAP3430_EN_WDT3_SHIFT				12
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK		(1 << 0)
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
+#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK			(0xf << 4)
 #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_IVA2_DPLL_SHIFT			0
 #define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
 #define OMAP3430_ST_IVA2_SHIFT				0
 #define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
+#define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
 #define OMAP3430_AUTO_IVA2_DPLL_MASK			(0x7 << 0)
 #define OMAP3430_IVA2_CLK_SRC_SHIFT			19
 #define OMAP3430_IVA2_CLK_SRC_WIDTH			3
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index b2d252bf4a5..dc571f1d3b8 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -162,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd)
 }
 #endif
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
 void omap44xx_restart(enum reboot_mode mode, const char *cmd);
 #else
 static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 592ba0a0ecf..b6f8f348296 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -297,33 +297,6 @@ static void omap_init_audio(void)
 static inline void omap_init_audio(void) {}
 #endif
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
-		defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
-
-static struct platform_device omap_hdmi_audio = {
-	.name	= "omap-hdmi-audio",
-	.id	= -1,
-};
-
-static void __init omap_init_hdmi_audio(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("dss_hdmi");
-	if (!oh)
-		return;
-
-	pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0);
-	WARN(IS_ERR(pdev),
-	     "Can't build omap_device for omap-hdmi-audio-dai.\n");
-
-	platform_device_register(&omap_hdmi_audio);
-}
-#else
-static inline void omap_init_hdmi_audio(void) {}
-#endif
-
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -459,7 +432,6 @@ static int __init omap2_init_devices(void)
 	 */
 	omap_init_audio();
 	omap_init_camera();
-	omap_init_hdmi_audio();
 	omap_init_mbox();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index b8208b4b1bd..f7492df1cbb 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -29,6 +29,7 @@
 #ifdef CONFIG_TIDSPBRIDGE_DVFS
 #include "omap-pm.h"
 #endif
+#include "soc.h"
 
 #include <linux/platform_data/dsp-omap.h>
 
@@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void)
 	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
 	phys_addr_t paddr;
 
+	if (!cpu_is_omap34xx())
+		return;
+
 	if (!size)
 		return;
 
@@ -83,6 +87,9 @@ static int __init omap_dsp_init(void)
 	int err = -ENOMEM;
 	struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
 
+	if (!cpu_is_omap34xx())
+		return 0;
+
 	pdata->phys_mempool_base = omap_dsp_get_mempool_base();
 
 	if (pdata->phys_mempool_base) {
@@ -115,6 +122,9 @@ module_init(omap_dsp_init);
 
 static void __exit omap_dsp_exit(void)
 {
+	if (!cpu_is_omap34xx())
+		return;
+
 	platform_device_unregister(omap_dsp_pdev);
 }
 module_exit(omap_dsp_exit);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2c0c2816900..8bc13380f0a 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 		return ret;
 	}
 
-	for_each_child_of_node(pdev->dev.of_node, child) {
+	for_each_available_child_of_node(pdev->dev.of_node, child) {
 
 		if (!child->name)
 			continue;
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 20b4398cec0..284324f2b98 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1268,9 +1268,6 @@ static struct omap_hwmod_class dra7xx_sata_hwmod_class = {
 };
 
 /* sata */
-static struct omap_hwmod_opt_clk sata_opt_clks[] = {
-	{ .role = "ref_clk", .clk = "sata_ref_clk" },
-};
 
 static struct omap_hwmod dra7xx_sata_hwmod = {
 	.name		= "sata",
@@ -1278,6 +1275,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
 	.clkdm_name	= "l3init_clkdm",
 	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 	.main_clk	= "func_48m_fclk",
+	.mpu_rt_idx	= 1,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
@@ -1285,8 +1283,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.opt_clks	= sata_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(sata_opt_clks),
 };
 
 /*
@@ -1731,8 +1727,20 @@ static struct omap_hwmod dra7xx_uart6_hwmod = {
  *
  */
 
+static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
 static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = {
 	.name	= "usb_otg_ss",
+	.sysc	= &dra7xx_usb_otg_ss_sysc,
 };
 
 /* usb_otg_ss1 */
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 106132db532..cbefbd7cfdb 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -35,6 +35,8 @@
 #define OMAP3430_LOGICSTATEST_MASK			(1 << 2)
 #define OMAP3430_LASTLOGICSTATEENTERED_MASK		(1 << 2)
 #define OMAP3430_LASTPOWERSTATEENTERED_MASK		(0x3 << 0)
+#define OMAP3430_GRPSEL_MCBSP5_MASK			(1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1_MASK			(1 << 9)
 #define OMAP3630_GRPSEL_UART4_MASK			(1 << 18)
 #define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
 #define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
@@ -42,6 +44,10 @@
 #define OMAP3430_GRPSEL_GPIO3_MASK			(1 << 14)
 #define OMAP3430_GRPSEL_GPIO2_MASK			(1 << 13)
 #define OMAP3430_GRPSEL_UART3_MASK			(1 << 11)
+#define OMAP3430_GRPSEL_GPT8_MASK			(1 << 9)
+#define OMAP3430_GRPSEL_GPT7_MASK			(1 << 8)
+#define OMAP3430_GRPSEL_GPT6_MASK			(1 << 7)
+#define OMAP3430_GRPSEL_GPT5_MASK			(1 << 6)
 #define OMAP3430_GRPSEL_MCBSP4_MASK			(1 << 2)
 #define OMAP3430_GRPSEL_MCBSP3_MASK			(1 << 1)
 #define OMAP3430_GRPSEL_MCBSP2_MASK			(1 << 0)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 076172b6942..7c3fb41a462 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -664,7 +664,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v
 
 static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
 {
-	unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
+	unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
 	bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9;
 
 	if (rev >= L310_CACHE_ID_RTL_R2P0) {