Merge branch 'master'; commit 'v2.6.38-rc7' into next

11 files changed, 435 insertions, 282 deletions

diff --git a/arch/blackfin/include/asm/bfin_dma.h b/arch/blackfin/include/asm/bfin_dma.h
new file mode 100644
index 00000000000..d5112074414
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_dma.h
@@ -0,0 +1,91 @@
+/*
+ * bfin_dma.h - Blackfin DMA defines/structures/etc...
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_DMA_H__
+#define __ASM_BFIN_DMA_H__
+
+#include <linux/types.h>
+
+/* DMA_CONFIG Masks */
+#define DMAEN			0x0001	/* DMA Channel Enable */
+#define WNR				0x0002	/* Channel Direction (W/R*) */
+#define WDSIZE_8		0x0000	/* Transfer Word Size = 8 */
+#define WDSIZE_16		0x0004	/* Transfer Word Size = 16 */
+#define WDSIZE_32		0x0008	/* Transfer Word Size = 32 */
+#define DMA2D			0x0010	/* DMA Mode (2D/1D*) */
+#define RESTART			0x0020	/* DMA Buffer Clear */
+#define DI_SEL			0x0040	/* Data Interrupt Timing Select */
+#define DI_EN			0x0080	/* Data Interrupt Enable */
+#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1 */
+#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2 */
+#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3 */
+#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4 */
+#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5 */
+#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6 */
+#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7 */
+#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8 */
+#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9 */
+#define NDSIZE			0x0f00	/* Next Descriptor Size */
+#define DMAFLOW			0x7000	/* Flow Control */
+#define DMAFLOW_STOP	0x0000	/* Stop Mode */
+#define DMAFLOW_AUTO	0x1000	/* Autobuffer Mode */
+#define DMAFLOW_ARRAY	0x4000	/* Descriptor Array Mode */
+#define DMAFLOW_SMALL	0x6000	/* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE	0x7000	/* Large Model Descriptor List Mode */
+
+/* DMA_IRQ_STATUS Masks */
+#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status */
+#define DMA_ERR			0x0002	/* DMA Error Interrupt Status */
+#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator */
+#define DMA_RUN			0x0008	/* DMA Channel Running Indicator */
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin dma registers layout
+ */
+struct bfin_dma_regs {
+	u32 next_desc_ptr;
+	u32 start_addr;
+	__BFP(config);
+	u32 __pad0;
+	__BFP(x_count);
+	__BFP(x_modify);
+	__BFP(y_count);
+	__BFP(y_modify);
+	u32 curr_desc_ptr;
+	u32 curr_addr;
+	__BFP(irq_status);
+	__BFP(peripheral_map);
+	__BFP(curr_x_count);
+	u32 __pad1;
+	__BFP(curr_y_count);
+	u32 __pad2;
+};
+
+/*
+ * bfin handshake mdma registers layout
+ */
+struct bfin_hmdma_regs {
+	__BFP(control);
+	__BFP(ecinit);
+	__BFP(bcinit);
+	__BFP(ecurgent);
+	__BFP(ecoverflow);
+	__BFP(ecount);
+	__BFP(bcount);
+};
+
+#undef __BFP
+
+#endif
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
new file mode 100644
index 00000000000..7dbc664eab1
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -0,0 +1,277 @@
+/*
+ * bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_ASM_SERIAL_H__
+#define __BFIN_ASM_SERIAL_H__
+
+#include <linux/serial_core.h>
+#include <linux/spinlock.h>
+#include <mach/anomaly.h>
+#include <mach/bfin_serial.h>
+
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || \
+    defined(CONFIG_BFIN_UART1_CTSRTS) || \
+    defined(CONFIG_BFIN_UART2_CTSRTS) || \
+    defined(CONFIG_BFIN_UART3_CTSRTS)
+# ifdef BFIN_UART_BF54X_STYLE
+#  define CONFIG_SERIAL_BFIN_HARD_CTSRTS
+# else
+#  define CONFIG_SERIAL_BFIN_CTSRTS
+# endif
+#endif
+
+struct circ_buf;
+struct timer_list;
+struct work_struct;
+
+struct bfin_serial_port {
+	struct uart_port port;
+	unsigned int old_status;
+	int status_irq;
+#ifndef BFIN_UART_BF54X_STYLE
+	unsigned int lsr;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	int tx_done;
+	int tx_count;
+	struct circ_buf rx_dma_buf;
+	struct timer_list rx_dma_timer;
+	int rx_dma_nrows;
+	spinlock_t rx_lock;
+	unsigned int tx_dma_channel;
+	unsigned int rx_dma_channel;
+	struct work_struct tx_dma_workqueue;
+#elif ANOMALY_05000363
+	unsigned int anomaly_threshold;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+	int scts;
+#endif
+#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
+	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+	int cts_pin;
+	int rts_pin;
+#endif
+};
+
+/* UART_LCR Masks */
+#define WLS(x)                   (((x)-5) & 0x03)  /* Word Length Select */
+#define STB                      0x04  /* Stop Bits */
+#define PEN                      0x08  /* Parity Enable */
+#define EPS                      0x10  /* Even Parity Select */
+#define STP                      0x20  /* Stick Parity */
+#define SB                       0x40  /* Set Break */
+#define DLAB                     0x80  /* Divisor Latch Access */
+
+/* UART_LSR Masks */
+#define DR                       0x01  /* Data Ready */
+#define OE                       0x02  /* Overrun Error */
+#define PE                       0x04  /* Parity Error */
+#define FE                       0x08  /* Framing Error */
+#define BI                       0x10  /* Break Interrupt */
+#define THRE                     0x20  /* THR Empty */
+#define TEMT                     0x40  /* TSR and UART_THR Empty */
+#define TFI                      0x80  /* Transmission Finished Indicator */
+
+/* UART_IER Masks */
+#define ERBFI                    0x01  /* Enable Receive Buffer Full Interrupt */
+#define ETBEI                    0x02  /* Enable Transmit Buffer Empty Interrupt */
+#define ELSI                     0x04  /* Enable RX Status Interrupt */
+#define EDSSI                    0x08  /* Enable Modem Status Interrupt */
+#define EDTPTI                   0x10  /* Enable DMA Transmit PIRQ Interrupt */
+#define ETFI                     0x20  /* Enable Transmission Finished Interrupt */
+#define ERFCI                    0x40  /* Enable Receive FIFO Count Interrupt */
+
+/* UART_MCR Masks */
+#define XOFF                     0x01  /* Transmitter Off */
+#define MRTS                     0x02  /* Manual Request To Send */
+#define RFIT                     0x04  /* Receive FIFO IRQ Threshold */
+#define RFRT                     0x08  /* Receive FIFO RTS Threshold */
+#define LOOP_ENA                 0x10  /* Loopback Mode Enable */
+#define FCPOL                    0x20  /* Flow Control Pin Polarity */
+#define ARTS                     0x40  /* Automatic Request To Send */
+#define ACTS                     0x80  /* Automatic Clear To Send */
+
+/* UART_MSR Masks */
+#define SCTS                     0x01  /* Sticky CTS */
+#define CTS                      0x10  /* Clear To Send */
+#define RFCS                     0x20  /* Receive FIFO Count Status */
+
+/* UART_GCTL Masks */
+#define UCEN                     0x01  /* Enable UARTx Clocks */
+#define IREN                     0x02  /* Enable IrDA Mode */
+#define TPOLC                    0x04  /* IrDA TX Polarity Change */
+#define RPOLC                    0x08  /* IrDA RX Polarity Change */
+#define FPE                      0x10  /* Force Parity Error On Transmit */
+#define FFE                      0x20  /* Force Framing Error On Transmit */
+
+#ifdef BFIN_UART_BF54X_STYLE
+# define OFFSET_DLL              0x00  /* Divisor Latch (Low-Byte)        */
+# define OFFSET_DLH              0x04  /* Divisor Latch (High-Byte)       */
+# define OFFSET_GCTL             0x08  /* Global Control Register         */
+# define OFFSET_LCR              0x0C  /* Line Control Register           */
+# define OFFSET_MCR              0x10  /* Modem Control Register          */
+# define OFFSET_LSR              0x14  /* Line Status Register            */
+# define OFFSET_MSR              0x18  /* Modem Status Register           */
+# define OFFSET_SCR              0x1C  /* SCR Scratch Register            */
+# define OFFSET_IER_SET          0x20  /* Set Interrupt Enable Register   */
+# define OFFSET_IER_CLEAR        0x24  /* Clear Interrupt Enable Register */
+# define OFFSET_THR              0x28  /* Transmit Holding register       */
+# define OFFSET_RBR              0x2C  /* Receive Buffer register         */
+#else /* BF533 style */
+# define OFFSET_THR              0x00  /* Transmit Holding register         */
+# define OFFSET_RBR              0x00  /* Receive Buffer register           */
+# define OFFSET_DLL              0x00  /* Divisor Latch (Low-Byte)          */
+# define OFFSET_DLH              0x04  /* Divisor Latch (High-Byte)         */
+# define OFFSET_IER              0x04  /* Interrupt Enable Register         */
+# define OFFSET_IIR              0x08  /* Interrupt Identification Register */
+# define OFFSET_LCR              0x0C  /* Line Control Register             */
+# define OFFSET_MCR              0x10  /* Modem Control Register            */
+# define OFFSET_LSR              0x14  /* Line Status Register              */
+# define OFFSET_MSR              0x18  /* Modem Status Register             */
+# define OFFSET_SCR              0x1C  /* SCR Scratch Register              */
+# define OFFSET_GCTL             0x24  /* Global Control Register           */
+/* code should not need IIR, so force build error if they use it */
+# undef OFFSET_IIR
+#endif
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+struct bfin_uart_regs {
+#ifdef BFIN_UART_BF54X_STYLE
+	__BFP(dll);
+	__BFP(dlh);
+	__BFP(gctl);
+	__BFP(lcr);
+	__BFP(mcr);
+	__BFP(lsr);
+	__BFP(msr);
+	__BFP(scr);
+	__BFP(ier_set);
+	__BFP(ier_clear);
+	__BFP(thr);
+	__BFP(rbr);
+#else
+	union {
+		u16 dll;
+		u16 thr;
+		const u16 rbr;
+	};
+	const u16 __pad0;
+	union {
+		u16 dlh;
+		u16 ier;
+	};
+	const u16 __pad1;
+	const __BFP(iir);
+	__BFP(lcr);
+	__BFP(mcr);
+	__BFP(lsr);
+	__BFP(msr);
+	__BFP(scr);
+	const u32 __pad2;
+	__BFP(gctl);
+#endif
+};
+#undef __BFP
+
+#ifndef port_membase
+# define port_membase(p) (((struct bfin_serial_port *)(p))->port.membase)
+#endif
+
+#define UART_GET_CHAR(p)      bfin_read16(port_membase(p) + OFFSET_RBR)
+#define UART_GET_DLL(p)       bfin_read16(port_membase(p) + OFFSET_DLL)
+#define UART_GET_DLH(p)       bfin_read16(port_membase(p) + OFFSET_DLH)
+#define UART_GET_GCTL(p)      bfin_read16(port_membase(p) + OFFSET_GCTL)
+#define UART_GET_LCR(p)       bfin_read16(port_membase(p) + OFFSET_LCR)
+#define UART_GET_MCR(p)       bfin_read16(port_membase(p) + OFFSET_MCR)
+#define UART_GET_MSR(p)       bfin_read16(port_membase(p) + OFFSET_MSR)
+
+#define UART_PUT_CHAR(p, v)   bfin_write16(port_membase(p) + OFFSET_THR, v)
+#define UART_PUT_DLL(p, v)    bfin_write16(port_membase(p) + OFFSET_DLL, v)
+#define UART_PUT_DLH(p, v)    bfin_write16(port_membase(p) + OFFSET_DLH, v)
+#define UART_PUT_GCTL(p, v)   bfin_write16(port_membase(p) + OFFSET_GCTL, v)
+#define UART_PUT_LCR(p, v)    bfin_write16(port_membase(p) + OFFSET_LCR, v)
+#define UART_PUT_MCR(p, v)    bfin_write16(port_membase(p) + OFFSET_MCR, v)
+
+#ifdef BFIN_UART_BF54X_STYLE
+
+#define UART_CLEAR_IER(p, v)  bfin_write16(port_membase(p) + OFFSET_IER_CLEAR, v)
+#define UART_GET_IER(p)       bfin_read16(port_membase(p) + OFFSET_IER_SET)
+#define UART_SET_IER(p, v)    bfin_write16(port_membase(p) + OFFSET_IER_SET, v)
+
+#define UART_CLEAR_DLAB(p)    /* MMRs not muxed on BF54x */
+#define UART_SET_DLAB(p)      /* MMRs not muxed on BF54x */
+
+#define UART_CLEAR_LSR(p)     bfin_write16(port_membase(p) + OFFSET_LSR, -1)
+#define UART_GET_LSR(p)       bfin_read16(port_membase(p) + OFFSET_LSR)
+#define UART_PUT_LSR(p, v)    bfin_write16(port_membase(p) + OFFSET_LSR, v)
+
+/* This handles hard CTS/RTS */
+#define BFIN_UART_CTSRTS_HARD
+#define UART_CLEAR_SCTS(p)      bfin_write16((port_membase(p) + OFFSET_MSR), SCTS)
+#define UART_GET_CTS(x)         (UART_GET_MSR(x) & CTS)
+#define UART_DISABLE_RTS(x)     UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS | MRTS))
+#define UART_ENABLE_RTS(x)      UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS)
+#define UART_ENABLE_INTS(x, v)  UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x)    UART_CLEAR_IER(x, 0xF)
+
+#else /* BF533 style */
+
+#define UART_CLEAR_IER(p, v)  UART_PUT_IER(p, UART_GET_IER(p) & ~(v))
+#define UART_GET_IER(p)       bfin_read16(port_membase(p) + OFFSET_IER)
+#define UART_PUT_IER(p, v)    bfin_write16(port_membase(p) + OFFSET_IER, v)
+#define UART_SET_IER(p, v)    UART_PUT_IER(p, UART_GET_IER(p) | (v))
+
+#define UART_CLEAR_DLAB(p)    do { UART_PUT_LCR(p, UART_GET_LCR(p) & ~DLAB); SSYNC(); } while (0)
+#define UART_SET_DLAB(p)      do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0)
+
+#ifndef put_lsr_cache
+# define put_lsr_cache(p, v) (((struct bfin_serial_port *)(p))->lsr = (v))
+#endif
+#ifndef get_lsr_cache
+# define get_lsr_cache(p)    (((struct bfin_serial_port *)(p))->lsr)
+#endif
+
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline void UART_CLEAR_LSR(void *p)
+{
+	put_lsr_cache(p, 0);
+	bfin_write16(port_membase(p) + OFFSET_LSR, -1);
+}
+static inline unsigned int UART_GET_LSR(void *p)
+{
+	unsigned int lsr = bfin_read16(port_membase(p) + OFFSET_LSR);
+	put_lsr_cache(p, get_lsr_cache(p) | (lsr & (BI|FE|PE|OE)));
+	return lsr | get_lsr_cache(p);
+}
+static inline void UART_PUT_LSR(void *p, uint16_t val)
+{
+	put_lsr_cache(p, get_lsr_cache(p) & ~val);
+}
+
+/* This handles soft CTS/RTS */
+#define UART_GET_CTS(x)        gpio_get_value((x)->cts_pin)
+#define UART_DISABLE_RTS(x)    gpio_set_value((x)->rts_pin, 1)
+#define UART_ENABLE_RTS(x)     gpio_set_value((x)->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x)   UART_PUT_IER(x, 0)
+
+#endif
+
+#ifndef BFIN_UART_TX_FIFO_SIZE
+# define BFIN_UART_TX_FIFO_SIZE 2
+#endif
+
+#endif /* __BFIN_ASM_SERIAL_H__ */
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 3f7ef4d9779..29f4fd88617 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -108,7 +108,9 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 #define smp_mb__before_clear_bit()	barrier()
 #define smp_mb__after_clear_bit()	barrier()
 
+#define test_bit __skip_test_bit
 #include <asm-generic/bitops/non-atomic.h>
+#undef test_bit
 
 #endif /* CONFIG_SMP */
 
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index bd0641a267f..568885a2c28 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -7,6 +7,8 @@
 #ifndef __ARCH_BLACKFIN_CACHE_H
 #define __ARCH_BLACKFIN_CACHE_H
 
+#include <linux/linkage.h>	/* for asmlinkage */
+
 /*
  * Bytes per L1 cache line
  * Blackfin loads 32 bytes for cache
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 2666ff8ea95..77135b62818 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -11,6 +11,9 @@
 
 #include <asm/blackfin.h>	/* for SSYNC() */
 #include <asm/sections.h>	/* for _ramend */
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#endif
 
 extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address);
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index eedf3ca65ba..d9dbc1a5353 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -14,40 +14,7 @@
 #include <asm/blackfin.h>
 #include <asm/page.h>
 #include <asm-generic/dma.h>
-
-/* DMA_CONFIG Masks */
-#define DMAEN			0x0001	/* DMA Channel Enable */
-#define WNR				0x0002	/* Channel Direction (W/R*) */
-#define WDSIZE_8		0x0000	/* Transfer Word Size = 8 */
-#define WDSIZE_16		0x0004	/* Transfer Word Size = 16 */
-#define WDSIZE_32		0x0008	/* Transfer Word Size = 32 */
-#define DMA2D			0x0010	/* DMA Mode (2D/1D*) */
-#define RESTART			0x0020	/* DMA Buffer Clear */
-#define DI_SEL			0x0040	/* Data Interrupt Timing Select */
-#define DI_EN			0x0080	/* Data Interrupt Enable */
-#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1 */
-#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2 */
-#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3 */
-#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4 */
-#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5 */
-#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6 */
-#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7 */
-#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8 */
-#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9 */
-#define NDSIZE			0x0f00	/* Next Descriptor Size */
-#define DMAFLOW			0x7000	/* Flow Control */
-#define DMAFLOW_STOP	0x0000	/* Stop Mode */
-#define DMAFLOW_AUTO	0x1000	/* Autobuffer Mode */
-#define DMAFLOW_ARRAY	0x4000	/* Descriptor Array Mode */
-#define DMAFLOW_SMALL	0x6000	/* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE	0x7000	/* Large Model Descriptor List Mode */
-
-/* DMA_IRQ_STATUS Masks */
-#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status */
-#define DMA_ERR			0x0002	/* DMA Error Interrupt Status */
-#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator */
-#define DMA_RUN			0x0008	/* DMA Channel Running Indicator */
+#include <asm/bfin_dma.h>
 
 /*-------------------------
  * config reg bits value
@@ -149,7 +116,7 @@ void blackfin_dma_resume(void);
 *	DMA API's
 *******************************************************************************/
 extern struct dma_channel dma_ch[MAX_DMA_CHANNELS];
-extern struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS];
+extern struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS];
 extern int channel2irq(unsigned int channel);
 
 static inline void set_dma_start_addr(unsigned int channel, unsigned long addr)
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index efcc3aebeae..3047120cfcf 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -9,6 +9,8 @@
 #ifndef _BLACKFIN_DPMC_H_
 #define _BLACKFIN_DPMC_H_
 
+#include <mach/pll.h>
+
 /* PLL_CTL Masks */
 #define DF			0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
 #define PLL_OFF			0x0002	/* PLL Not Powered */
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 234fbac17ec..dccae26805b 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -7,148 +7,48 @@
 #ifndef _BFIN_IO_H
 #define _BFIN_IO_H
 
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#endif
 #include <linux/compiler.h>
-
-/*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the bfin architecture, we just read/write the
- * memory location directly.
- */
-#ifndef __ASSEMBLY__
-
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
-	unsigned int val;
-	int tmp;
-
-	__asm__ __volatile__ (
-		"cli %1;"
-		"NOP; NOP; SSYNC;"
-		"%0 = b [%2] (z);"
-		"sti %1;"
-		: "=d"(val), "=d"(tmp)
-		: "a"(addr)
-	);
-
-	return (unsigned char) val;
-}
-
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
-	unsigned int val;
-	int tmp;
-
-	__asm__ __volatile__ (
-		"cli %1;"
-		"NOP; NOP; SSYNC;"
-		"%0 = w [%2] (z);"
-		"sti %1;"
-		: "=d"(val), "=d"(tmp)
-		: "a"(addr)
-	);
-
-	return (unsigned short) val;
-}
-
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
-	unsigned int val;
-	int tmp;
-
-	__asm__ __volatile__ (
-		"cli %1;"
-		"NOP; NOP; SSYNC;"
-		"%0 = [%2];"
-		"sti %1;"
-		: "=d"(val), "=d"(tmp)
-		: "a"(addr)
-	);
-
-	return val;
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define DECLARE_BFIN_RAW_READX(size, type, asm, asm_sign) \
+static inline type __raw_read##size(const volatile void __iomem *addr) \
+{ \
+	unsigned int val; \
+	int tmp; \
+	__asm__ __volatile__ ( \
+		"cli %1;" \
+		"NOP; NOP; SSYNC;" \
+		"%0 = "#asm" [%2] "#asm_sign";" \
+		"sti %1;" \
+		: "=d"(val), "=d"(tmp) \
+		: "a"(addr) \
+	); \
+	return (type) val; \
 }
-
-#endif /*  __ASSEMBLY__ */
-
-#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-#define memset_io(a, b, c)	memset((void *)(a), (b), (c))
-#define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
-#define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
-
-/* Convert "I/O port addresses" to actual addresses.  i.e. ugly casts. */
-#define __io(port) ((void *)(unsigned long)(port))
-
-#define inb(port)    readb(__io(port))
-#define inw(port)    readw(__io(port))
-#define inl(port)    readl(__io(port))
-#define outb(x, port) writeb(x, __io(port))
-#define outw(x, port) writew(x, __io(port))
-#define outl(x, port) writel(x, __io(port))
-
-#define inb_p(port)    inb(__io(port))
-#define inw_p(port)    inw(__io(port))
-#define inl_p(port)    inl(__io(port))
-#define outb_p(x, port) outb(x, __io(port))
-#define outw_p(x, port) outw(x, __io(port))
-#define outl_p(x, port) outl(x, __io(port))
-
-#define ioread8_rep(a, d, c)	readsb(a, d, c)
-#define ioread16_rep(a, d, c)	readsw(a, d, c)
-#define ioread32_rep(a, d, c)	readsl(a, d, c)
-#define iowrite8_rep(a, s, c)	writesb(a, s, c)
-#define iowrite16_rep(a, s, c)	writesw(a, s, c)
-#define iowrite32_rep(a, s, c)	writesl(a, s, c)
-
-#define ioread8(x)			readb(x)
-#define ioread16(x)			readw(x)
-#define ioread32(x)			readl(x)
-#define iowrite8(val, x)		writeb(val, x)
-#define iowrite16(val, x)		writew(val, x)
-#define iowrite32(val, x)		writel(val, x)
-
-/**
- * I/O write barrier
- *
- * Ensure ordering of I/O space writes. This will make sure that writes
- * following the barrier will arrive after all previous writes.
- */
-#define mmiowb() do { SSYNC(); wmb(); } while (0)
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_NOCACHE_SER		1
-
-#ifndef __ASSEMBLY__
+DECLARE_BFIN_RAW_READX(b, u8, b, (z))
+#define __raw_readb __raw_readb
+DECLARE_BFIN_RAW_READX(w, u16, w, (z))
+#define __raw_readw __raw_readw
+DECLARE_BFIN_RAW_READX(l, u32, , )
+#define __raw_readl __raw_readl
 
 extern void outsb(unsigned long port, const void *addr, unsigned long count);
 extern void outsw(unsigned long port, const void *addr, unsigned long count);
 extern void outsw_8(unsigned long port, const void *addr, unsigned long count);
 extern void outsl(unsigned long port, const void *addr, unsigned long count);
+#define outsb outsb
+#define outsw outsw
+#define outsl outsl
 
 extern void insb(unsigned long port, void *addr, unsigned long count);
 extern void insw(unsigned long port, void *addr, unsigned long count);
 extern void insw_8(unsigned long port, void *addr, unsigned long count);
 extern void insl(unsigned long port, void *addr, unsigned long count);
 extern void insl_16(unsigned long port, void *addr, unsigned long count);
+#define insb insb
+#define insw insw
+#define insl insl
 
 extern void dma_outsb(unsigned long port, const void *addr, unsigned short count);
 extern void dma_outsw(unsigned long port, const void *addr, unsigned short count);
@@ -158,108 +58,14 @@ extern void dma_insb(unsigned long port, void *addr, unsigned short count);
 extern void dma_insw(unsigned long port, void *addr, unsigned short count);
 extern void dma_insl(unsigned long port, void *addr, unsigned short count);
 
-static inline void readsl(const void __iomem *addr, void *buf, int len)
-{
-	insl((unsigned long)addr, buf, len);
-}
-
-static inline void readsw(const void __iomem *addr, void *buf, int len)
-{
-	insw((unsigned long)addr, buf, len);
-}
-
-static inline void readsb(const void __iomem *addr, void *buf, int len)
-{
-	insb((unsigned long)addr, buf, len);
-}
-
-static inline void writesl(const void __iomem *addr, const void *buf, int len)
-{
-	outsl((unsigned long)addr, buf, len);
-}
-
-static inline void writesw(const void __iomem *addr, const void *buf, int len)
-{
-	outsw((unsigned long)addr, buf, len);
-}
-
-static inline void writesb(const void __iomem *addr, const void *buf, int len)
-{
-	outsb((unsigned long)addr, buf, len);
-}
-
-/*
- * Map some physical address range into the kernel address space.
- */
-static inline void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
-				int cacheflag)
-{
-	return (void __iomem *)physaddr;
-}
-
-/*
- * Unmap a ioremap()ed region again
- */
-static inline void iounmap(void *addr)
-{
-}
-
-/*
- * __iounmap unmaps nearly everything, so be careful
- * it doesn't free currently pointer/page tables anymore but it
- * wans't used anyway and might be added later.
- */
-static inline void __iounmap(void *addr, unsigned long size)
-{
-}
-
-/*
- * Set new cache mode for some kernel address space.
- * The caller must push data for that range itself, if such data may already
- * be in the cache.
+/**
+ * I/O write barrier
+ *
+ * Ensure ordering of I/O space writes. This will make sure that writes
+ * following the barrier will arrive after all previous writes.
  */
-static inline void kernel_set_cachemode(void *addr, unsigned long size,
-					int cmode)
-{
-}
-
-static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void __iomem *ioremap_nocache(unsigned long physaddr,
-					    unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
+#define mmiowb() do { SSYNC(); wmb(); } while (0)
 
-extern void blkfin_inv_cache_all(void);
+#include <asm-generic/io.h>
 
 #endif
-
-#define	ioport_map(port, nr)		((void __iomem*)(port))
-#define	ioport_unmap(addr)
-
-/* Pages to physical address... */
-#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
-
-#define phys_to_virt(vaddr)	((void *) (vaddr))
-#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif				/* __KERNEL__ */
-
-#endif				/* _BFIN_IO_H */
diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h
index 41c4d70544e..3365cb97f53 100644
--- a/arch/blackfin/include/asm/irqflags.h
+++ b/arch/blackfin/include/asm/irqflags.h
@@ -13,9 +13,6 @@
 #ifdef CONFIG_SMP
 # include <asm/pda.h>
 # include <asm/processor.h>
-/* Forward decl needed due to cdef inter dependencies */
-static inline uint32_t __pure bfin_dspid(void);
-# define blackfin_core_id() (bfin_dspid() & 0xff)
 # define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
 #else
 extern unsigned long bfin_irq_flags;
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index aea880274de..8af7772e84c 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -14,7 +14,7 @@
 #define current_text_addr() ({ __label__ _l; _l: &&_l;})
 
 #include <asm/ptrace.h>
-#include <asm/blackfin.h>
+#include <mach/blackfin.h>
 
 static inline unsigned long rdusp(void)
 {
@@ -134,6 +134,8 @@ static inline uint32_t __pure bfin_dspid(void)
 	return bfin_read_DSPID();
 }
 
+#define blackfin_core_id() (bfin_dspid() & 0xff)
+
 static inline uint32_t __pure bfin_compiled_revid(void)
 {
 #if defined(CONFIG_BF_REV_0_0)
diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h
index 1942ccfedbe..1f286e71c21 100644
--- a/arch/blackfin/include/asm/spinlock.h
+++ b/arch/blackfin/include/asm/spinlock.h
@@ -17,12 +17,12 @@ asmlinkage int __raw_spin_is_locked_asm(volatile int *ptr);
 asmlinkage void __raw_spin_lock_asm(volatile int *ptr);
 asmlinkage int __raw_spin_trylock_asm(volatile int *ptr);
 asmlinkage void __raw_spin_unlock_asm(volatile int *ptr);
-asmlinkage void arch_read_lock_asm(volatile int *ptr);
-asmlinkage int arch_read_trylock_asm(volatile int *ptr);
-asmlinkage void arch_read_unlock_asm(volatile int *ptr);
-asmlinkage void arch_write_lock_asm(volatile int *ptr);
-asmlinkage int arch_write_trylock_asm(volatile int *ptr);
-asmlinkage void arch_write_unlock_asm(volatile int *ptr);
+asmlinkage void __raw_read_lock_asm(volatile int *ptr);
+asmlinkage int __raw_read_trylock_asm(volatile int *ptr);
+asmlinkage void __raw_read_unlock_asm(volatile int *ptr);
+asmlinkage void __raw_write_lock_asm(volatile int *ptr);
+asmlinkage int __raw_write_trylock_asm(volatile int *ptr);
+asmlinkage void __raw_write_unlock_asm(volatile int *ptr);
 
 static inline int arch_spin_is_locked(arch_spinlock_t *lock)
 {
@@ -64,32 +64,36 @@ static inline int arch_write_can_lock(arch_rwlock_t *rw)
 
 static inline void arch_read_lock(arch_rwlock_t *rw)
 {
-	arch_read_lock_asm(&rw->lock);
+	__raw_read_lock_asm(&rw->lock);
 }
 
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+
 static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
-	return arch_read_trylock_asm(&rw->lock);
+	return __raw_read_trylock_asm(&rw->lock);
 }
 
 static inline void arch_read_unlock(arch_rwlock_t *rw)
 {
-	arch_read_unlock_asm(&rw->lock);
+	__raw_read_unlock_asm(&rw->lock);
 }
 
 static inline void arch_write_lock(arch_rwlock_t *rw)
 {
-	arch_write_lock_asm(&rw->lock);
+	__raw_write_lock_asm(&rw->lock);
 }
 
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
 static inline int arch_write_trylock(arch_rwlock_t *rw)
 {
-	return arch_write_trylock_asm(&rw->lock);
+	return __raw_write_trylock_asm(&rw->lock);
 }
 
 static inline void arch_write_unlock(arch_rwlock_t *rw)
 {
-	arch_write_unlock_asm(&rw->lock);
+	__raw_write_unlock_asm(&rw->lock);
 }
 
 #define arch_spin_relax(lock)  	cpu_relax()