Merge branch 'master'; commit 'v2.6.38-rc7' into next

15 files changed, 118 insertions, 388 deletions

diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 2ce7b16faee..d4bfcea5682 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -286,7 +286,7 @@ static struct resource bfin_uart0_resources[] = {
 	},
 };
 
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
 	P_UART0_TX, P_UART0_RX, 0
 };
 
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 20c102285be..87b5af3693c 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -25,7 +25,6 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
-#include <mach/fio_flag.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -225,7 +224,7 @@ static struct resource bfin_uart0_resources[] = {
 	},
 };
 
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
 	P_UART0_TX, P_UART0_RX, 0
 };
 
@@ -290,9 +289,9 @@ static struct resource bfin_sport0_uart_resources[] = {
 	},
 };
 
-unsigned short bfin_sport0_peripherals[] = {
+static unsigned short bfin_sport0_peripherals[] = {
 	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
 };
 
 static struct platform_device bfin_sport0_uart_device = {
@@ -324,9 +323,9 @@ static struct resource bfin_sport1_uart_resources[] = {
 	},
 };
 
-unsigned short bfin_sport1_peripherals[] = {
+static unsigned short bfin_sport1_peripherals[] = {
 	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
@@ -476,10 +475,16 @@ static int __init blackstamp_init(void)
 		return ret;
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
-	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
-	bfin_write_FIO_FLAG_S(PF0);
-	SSYNC();
+	/*
+	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
+	 * the bfin-async-map driver takes care of flipping between
+	 * flash and ethernet when necessary.
+	 */
+	ret = gpio_request(GPIO_PF0, "enet_cpld");
+	if (!ret) {
+		gpio_direction_output(GPIO_PF0, 1);
+		gpio_free(GPIO_PF0);
+	}
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index adbe62a81e2..4d5604eaa7c 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -271,7 +271,7 @@ static struct resource bfin_uart0_resources[] = {
 	},
 };
 
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
 	P_UART0_TX, P_UART0_RX, 0
 };
 
@@ -336,9 +336,9 @@ static struct resource bfin_sport0_uart_resources[] = {
 	},
 };
 
-unsigned short bfin_sport0_peripherals[] = {
+static unsigned short bfin_sport0_peripherals[] = {
 	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
 };
 
 static struct platform_device bfin_sport0_uart_device = {
@@ -370,9 +370,9 @@ static struct resource bfin_sport1_uart_resources[] = {
 	},
 };
 
-unsigned short bfin_sport1_peripherals[] = {
+static unsigned short bfin_sport1_peripherals[] = {
 	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index a1cb8e7c101..b67b91d8224 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -349,7 +349,7 @@ static struct resource bfin_uart0_resources[] = {
 	},
 };
 
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
 	P_UART0_TX, P_UART0_RX, 0
 };
 
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index 5ba4b02a12e..f869a371148 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -22,7 +22,6 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
-#include <mach/fio_flag.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -174,7 +173,7 @@ static struct resource bfin_uart0_resources[] = {
 	},
 };
 
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
 	P_UART0_TX, P_UART0_RX, 0
 };
 
@@ -295,15 +294,7 @@ static int __init ip0x_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices));
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	for (i = 0; i < ARRAY_SIZE(bfin_spi_board_info); ++i) {
-		int j = 1 << bfin_spi_board_info[i].chip_select;
-		/* set spi cs to 1 */
-		bfin_write_FIO_DIR(bfin_read_FIO_DIR() | j);
-		bfin_write_FIO_FLAG_S(j);
-	}
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
 
 	return 0;
 }
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index b3b1cdea270..43224ef00b8 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -24,7 +24,6 @@
 #include <asm/reboot.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
-#include <mach/fio_flag.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -354,7 +353,7 @@ static struct resource bfin_uart0_resources[] = {
 	},
 };
 
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
 	P_UART0_TX, P_UART0_RX, 0
 };
 
@@ -419,9 +418,9 @@ static struct resource bfin_sport0_uart_resources[] = {
 	},
 };
 
-unsigned short bfin_sport0_peripherals[] = {
+static unsigned short bfin_sport0_peripherals[] = {
 	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
 };
 
 static struct platform_device bfin_sport0_uart_device = {
@@ -453,9 +452,9 @@ static struct resource bfin_sport1_uart_resources[] = {
 	},
 };
 
-unsigned short bfin_sport1_peripherals[] = {
+static unsigned short bfin_sport1_peripherals[] = {
 	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
@@ -674,10 +673,16 @@ static int __init stamp_init(void)
 		return ret;
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
-	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
-	bfin_write_FIO_FLAG_S(PF0);
-	SSYNC();
+	/*
+	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
+	 * the bfin-async-map driver takes care of flipping between
+	 * flash and ethernet when necessary.
+	 */
+	ret = gpio_request(GPIO_PF0, "enet_cpld");
+	if (!ret) {
+		gpio_direction_output(GPIO_PF0, 1);
+		gpio_free(GPIO_PF0);
+	}
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
@@ -713,7 +718,6 @@ void __init native_machine_early_platform_add_devices(void)
 void native_machine_restart(char *cmd)
 {
 	/* workaround pull up on cpld / flash pin not being strong enough */
-	bfin_write_FIO_INEN(~PF0);
-	bfin_write_FIO_DIR(PF0);
-	bfin_write_FIO_FLAG_C(PF0);
+	gpio_request(GPIO_PF0, "flash_cpld");
+	gpio_direction_output(GPIO_PF0, 0);
 }
diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c
index 4a14a46a9a6..1f5988d4313 100644
--- a/arch/blackfin/mach-bf533/dma.c
+++ b/arch/blackfin/mach-bf533/dma.c
@@ -11,7 +11,7 @@
 #include <asm/blackfin.h>
 #include <asm/dma.h>
 
-struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = {
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
 	(struct dma_register *) DMA0_NEXT_DESC_PTR,
 	(struct dma_register *) DMA1_NEXT_DESC_PTR,
 	(struct dma_register *) DMA2_NEXT_DESC_PTR,
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
new file mode 100644
index 00000000000..08072c86d5d
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	1
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 9e1f3defb6b..45dcaa4f3e4 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -4,36 +4,9 @@
  * Licensed under the GPL-2 or later
  */
 
-#include <linux/serial.h>
 #include <asm/dma.h>
 #include <asm/portmux.h>
 
-#define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
-#define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
-#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
-#define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
-#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
-#define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
-
-#define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
-#define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
-#define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
-#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
-#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
-#define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
-#define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
-#define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
-
-#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
-#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
-#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
-#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
-
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN
@@ -44,51 +17,6 @@
 # endif
 #endif
 
-#define BFIN_UART_TX_FIFO_SIZE	2
-
-struct bfin_serial_port {
-        struct uart_port        port;
-        unsigned int            old_status;
-	int			status_irq;
-	unsigned int lsr;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	int			tx_done;
-	int			tx_count;
-	struct circ_buf		rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int			rx_dma_nrows;
-	unsigned int		tx_dma_channel;
-	unsigned int		rx_dma_channel;
-	struct work_struct	tx_dma_workqueue;
-#else
-# if ANOMALY_05000363
-	unsigned int anomaly_threshold;
-# endif
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	struct timer_list       cts_timer;
-	int			cts_pin;
-	int			rts_pin;
-#endif
-};
-
-/* The hardware clears the LSR bits upon read, so we need to cache
- * some of the more fun bits in software so they don't get lost
- * when checking the LSR in other code paths (TX).
- */
-static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
-{
-	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
-	uart->lsr |= (lsr & (BI|FE|PE|OE));
-	return lsr | uart->lsr;
-}
-
-static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
-{
-	uart->lsr = 0;
-	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
-}
-
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -120,3 +48,5 @@ struct bfin_serial_res bfin_serial_resource[] = {
 };
 
 #define DRIVER_NAME "bfin-uart"
+
+#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index f4bd6df5d96..e366207fbf1 100644
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -1,7 +1,7 @@
 /*
- * Copyright 2005-2009 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
  *
- * Licensed under the GPL-2 or later
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_BLACKFIN_H_
@@ -10,26 +10,14 @@
 #define BF533_FAMILY
 
 #include "bf533.h"
-#include "defBF532.h"
 #include "anomaly.h"
 
-#if !defined(__ASSEMBLY__)
-#include "cdefBF532.h"
-#endif
-
-#define BFIN_UART_NR_PORTS      1
+#include <asm/def_LPBlackfin.h>
+#include "defBF532.h"
 
-#define OFFSET_THR              0x00	/* Transmit Holding register            */
-#define OFFSET_RBR              0x00	/* Receive Buffer register              */
-#define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
-#define OFFSET_IER              0x04	/* Interrupt Enable Register            */
-#define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
-#define OFFSET_IIR              0x08	/* Interrupt Identification Register    */
-#define OFFSET_LCR              0x0C	/* Line Control Register                */
-#define OFFSET_MCR              0x10	/* Modem Control Register               */
-#define OFFSET_LSR              0x14	/* Line Status Register                 */
-#define OFFSET_MSR              0x18	/* Modem Status Register                */
-#define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
-#define OFFSET_GCTL             0x24	/* Global Control Register              */
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# include "cdefBF532.h"
+#endif
 
-#endif				/* _MACH_BLACKFIN_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
index 401e524f532..fd0cbe4df21 100644
--- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2005-2008 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later
  */
@@ -7,9 +7,6 @@
 #ifndef _CDEF_BF532_H
 #define _CDEF_BF532_H
 
-/*include core specific register pointer definitions*/
-#include <asm/cdef_LPBlackfin.h>
-
 /* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */
 #define bfin_read_PLL_CTL()                  bfin_read16(PLL_CTL)
 #define bfin_read_PLL_STAT()                 bfin_read16(PLL_STAT)
@@ -66,16 +63,10 @@
 #define bfin_write_RTC_PREN(val)             bfin_write16(RTC_PREN,val)
 
 /* DMA Traffic controls */
-#define bfin_read_DMA_TCPER()                bfin_read16(DMA_TCPER)
-#define bfin_write_DMA_TCPER(val)            bfin_write16(DMA_TCPER,val)
-#define bfin_read_DMA_TCCNT()                bfin_read16(DMA_TCCNT)
-#define bfin_write_DMA_TCCNT(val)            bfin_write16(DMA_TCCNT,val)
-
-/* Alternate deprecated register names (below) provided for backwards code compatibility */
-#define bfin_read_DMA_TC_PER()               bfin_read16(DMA_TC_PER)
-#define bfin_write_DMA_TC_PER(val)           bfin_write16(DMA_TC_PER,val)
-#define bfin_read_DMA_TC_CNT()               bfin_read16(DMA_TC_CNT)
-#define bfin_write_DMA_TC_CNT(val)           bfin_write16(DMA_TC_CNT,val)
+#define bfin_read_DMAC_TC_PER()              bfin_read16(DMAC_TC_PER)
+#define bfin_write_DMAC_TC_PER(val)          bfin_write16(DMAC_TC_PER,val)
+#define bfin_read_DMAC_TC_CNT()              bfin_read16(DMAC_TC_CNT)
+#define bfin_write_DMAC_TC_CNT(val)          bfin_write16(DMAC_TC_CNT,val)
 
 /* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */
 #define bfin_read_FIO_DIR()                  bfin_read16(FIO_DIR)
@@ -105,6 +96,47 @@
 #define bfin_read_FIO_MASKB_T()              bfin_read16(FIO_MASKB_T)
 #define bfin_write_FIO_MASKB_T(val)          bfin_write16(FIO_MASKB_T,val)
 
+#if ANOMALY_05000311
+/* Keep at the CPP expansion to avoid circular header dependency loops */
+#define BFIN_WRITE_FIO_FLAG(name, val) \
+	do { \
+		unsigned long __flags; \
+		__flags = hard_local_irq_save(); \
+		bfin_write16(FIO_FLAG_##name, val); \
+		bfin_read_CHIPID(); \
+		hard_local_irq_restore(__flags); \
+	} while (0)
+#define bfin_write_FIO_FLAG_D(val)           BFIN_WRITE_FIO_FLAG(D, val)
+#define bfin_write_FIO_FLAG_C(val)           BFIN_WRITE_FIO_FLAG(C, val)
+#define bfin_write_FIO_FLAG_S(val)           BFIN_WRITE_FIO_FLAG(S, val)
+#define bfin_write_FIO_FLAG_T(val)           BFIN_WRITE_FIO_FLAG(T, val)
+
+#define BFIN_READ_FIO_FLAG(name) \
+	({ \
+		unsigned long __flags; \
+		u16 __ret; \
+		__flags = hard_local_irq_save(); \
+		__ret = bfin_read16(FIO_FLAG_##name); \
+		bfin_read_CHIPID(); \
+		hard_local_irq_restore(__flags); \
+		__ret; \
+	})
+#define bfin_read_FIO_FLAG_D()               BFIN_READ_FIO_FLAG(D)
+#define bfin_read_FIO_FLAG_C()               BFIN_READ_FIO_FLAG(C)
+#define bfin_read_FIO_FLAG_S()               BFIN_READ_FIO_FLAG(S)
+#define bfin_read_FIO_FLAG_T()               BFIN_READ_FIO_FLAG(T)
+
+#else
+#define bfin_write_FIO_FLAG_D(val)           bfin_write16(FIO_FLAG_D, val)
+#define bfin_write_FIO_FLAG_C(val)           bfin_write16(FIO_FLAG_C, val)
+#define bfin_write_FIO_FLAG_S(val)           bfin_write16(FIO_FLAG_S, val)
+#define bfin_write_FIO_FLAG_T(val)           bfin_write16(FIO_FLAG_T, val)
+#define bfin_read_FIO_FLAG_D()               bfin_read16(FIO_FLAG_D)
+#define bfin_read_FIO_FLAG_C()               bfin_read16(FIO_FLAG_C)
+#define bfin_read_FIO_FLAG_S()               bfin_read16(FIO_FLAG_S)
+#define bfin_read_FIO_FLAG_T()               bfin_read16(FIO_FLAG_T)
+#endif
+
 /* DMA Controller */
 #define bfin_read_DMA0_CONFIG()              bfin_read16(DMA0_CONFIG)
 #define bfin_write_DMA0_CONFIG(val)          bfin_write16(DMA0_CONFIG,val)
@@ -647,7 +679,4 @@
 #define bfin_read_PPI_FRAME()                bfin_read16(PPI_FRAME)
 #define bfin_write_PPI_FRAME(val)            bfin_write16(PPI_FRAME,val)
 
-/* These need to be last due to the cdef/linux inter-dependencies */
-#include <asm/irq.h>
-
 #endif				/* _CDEF_BF532_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 3adb0b44e59..2376d539351 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -1,7 +1,7 @@
 /*
  * System & MMR bit and Address definitions for ADSP-BF532
  *
- * Copyright 2005-2008 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
  *
  * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
@@ -9,9 +9,6 @@
 #ifndef _DEF_BF532_H
 #define _DEF_BF532_H
 
-/* include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
 /*********************************************************************************** */
 /* System MMR Register Map */
 /*********************************************************************************** */
@@ -182,12 +179,8 @@
 #define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register */
 
 /* DMA Traffic controls */
-#define DMA_TC_PER 0xFFC00B0C	/* Traffic Control Periods Register */
-#define DMA_TC_CNT 0xFFC00B10	/* Traffic Control Current Counts Register */
-
-/* Alternate deprecated register names (below) provided for backwards code compatibility */
-#define DMA_TCPER 0xFFC00B0C	/* Traffic Control Periods Register */
-#define DMA_TCCNT 0xFFC00B10	/* Traffic Control Current Counts Register */
+#define DMAC_TC_PER 0xFFC00B0C	/* Traffic Control Periods Register */
+#define DMAC_TC_CNT 0xFFC00B10	/* Traffic Control Current Counts Register */
 
 /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
 #define DMA0_CONFIG		0xFFC00C08	/* DMA Channel 0 Configuration Register */
@@ -432,83 +425,6 @@
 #define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
 #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
 
-/* ***************************** UART CONTROLLER MASKS ********************** */
-
-/* UART_LCR Register */
-
-#define DLAB	0x80
-#define SB      0x40
-#define STP      0x20
-#define EPS     0x10
-#define PEN	0x08
-#define STB	0x04
-#define WLS(x)	((x-5) & 0x03)
-
-#define DLAB_P	0x07
-#define SB_P	0x06
-#define STP_P	0x05
-#define EPS_P	0x04
-#define PEN_P	0x03
-#define STB_P	0x02
-#define WLS_P1	0x01
-#define WLS_P0	0x00
-
-/* UART_MCR Register */
-#define LOOP_ENA	0x10
-#define LOOP_ENA_P	0x04
-
-/* UART_LSR Register */
-#define TEMT	0x40
-#define THRE	0x20
-#define BI	0x10
-#define FE	0x08
-#define PE	0x04
-#define OE	0x02
-#define DR	0x01
-
-#define TEMP_P	0x06
-#define THRE_P	0x05
-#define BI_P	0x04
-#define FE_P	0x03
-#define PE_P	0x02
-#define OE_P	0x01
-#define DR_P	0x00
-
-/* UART_IER Register */
-#define ELSI	0x04
-#define ETBEI	0x02
-#define ERBFI	0x01
-
-#define ELSI_P	0x02
-#define ETBEI_P	0x01
-#define ERBFI_P	0x00
-
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define NINT		0x01
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-#define NINT_P		0x00
-#define IIR_TX_READY    0x02	/* UART_THR empty                               */
-#define IIR_RX_READY    0x04	/* Receive data ready                           */
-#define IIR_LINE_CHANGE 0x06	/* Receive line status                          */
-#define IIR_STATUS	0x06
-
-/* UART_GCTL Register */
-#define FFE	0x20
-#define FPE	0x10
-#define RPOLC	0x08
-#define TPOLC	0x04
-#define IREN	0x02
-#define UCEN	0x01
-
-#define FFE_P	0x05
-#define FPE_P	0x04
-#define RPOLC_P	0x03
-#define TPOLC_P	0x02
-#define IREN_P	0x01
-#define UCEN_P	0x00
-
 /*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
 
 /*  PPI_CONTROL Masks         */
@@ -643,44 +559,6 @@
 #define ERR_TYP_P0		0x0E
 #define ERR_TYP_P1		0x0F
 
-/*/ ******************   PROGRAMMABLE FLAG MASKS  ********************* */
-
-/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
-#define PF0         0x0001
-#define PF1         0x0002
-#define PF2         0x0004
-#define PF3         0x0008
-#define PF4         0x0010
-#define PF5         0x0020
-#define PF6         0x0040
-#define PF7         0x0080
-#define PF8         0x0100
-#define PF9         0x0200
-#define PF10        0x0400
-#define PF11        0x0800
-#define PF12        0x1000
-#define PF13        0x2000
-#define PF14        0x4000
-#define PF15        0x8000
-
-/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  BIT POSITIONS */
-#define PF0_P         0
-#define PF1_P         1
-#define PF2_P         2
-#define PF3_P         3
-#define PF4_P         4
-#define PF5_P         5
-#define PF6_P         6
-#define PF7_P         7
-#define PF8_P         8
-#define PF9_P         9
-#define PF10_P        10
-#define PF11_P        11
-#define PF12_P        12
-#define PF13_P        13
-#define PF14_P        14
-#define PF15_P        15
-
 /* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
 
 /* AMGCTL Masks */
diff --git a/arch/blackfin/mach-bf533/include/mach/fio_flag.h b/arch/blackfin/mach-bf533/include/mach/fio_flag.h
deleted file mode 100644
index d0bfba0b083..00000000000
--- a/arch/blackfin/mach-bf533/include/mach/fio_flag.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#ifndef _MACH_FIO_FLAG_H
-#define _MACH_FIO_FLAG_H
-
-#include <asm/blackfin.h>
-#include <asm/irqflags.h>
-
-#if ANOMALY_05000311
-#define BFIN_WRITE_FIO_FLAG(name) \
-static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \
-{ \
-	unsigned long flags; \
-	flags = hard_local_irq_save(); \
-	bfin_write16(FIO_FLAG_##name, val); \
-	bfin_read_CHIPID(); \
-	hard_local_irq_restore(flags); \
-}
-BFIN_WRITE_FIO_FLAG(D)
-BFIN_WRITE_FIO_FLAG(C)
-BFIN_WRITE_FIO_FLAG(S)
-BFIN_WRITE_FIO_FLAG(T)
-
-#define BFIN_READ_FIO_FLAG(name) \
-static inline u16 bfin_read_FIO_FLAG_##name(void) \
-{ \
-	unsigned long flags; \
-	u16 ret; \
-	flags = hard_local_irq_save(); \
-	ret = bfin_read16(FIO_FLAG_##name); \
-	bfin_read_CHIPID(); \
-	hard_local_irq_restore(flags); \
-	return ret; \
-}
-BFIN_READ_FIO_FLAG(D)
-BFIN_READ_FIO_FLAG(C)
-BFIN_READ_FIO_FLAG(S)
-BFIN_READ_FIO_FLAG(T)
-
-#else
-#define bfin_write_FIO_FLAG_D(val)           bfin_write16(FIO_FLAG_D, val)
-#define bfin_write_FIO_FLAG_C(val)           bfin_write16(FIO_FLAG_C, val)
-#define bfin_write_FIO_FLAG_S(val)           bfin_write16(FIO_FLAG_S, val)
-#define bfin_write_FIO_FLAG_T(val)           bfin_write16(FIO_FLAG_T, val)
-#define bfin_read_FIO_FLAG_T()               bfin_read16(FIO_FLAG_T)
-#define bfin_read_FIO_FLAG_C()               bfin_read16(FIO_FLAG_C)
-#define bfin_read_FIO_FLAG_S()               bfin_read16(FIO_FLAG_S)
-#define bfin_read_FIO_FLAG_D()               bfin_read16(FIO_FLAG_D)
-#endif
-
-#endif /* _MACH_FIO_FLAG_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h
index e02416db4b0..cce4f8fb378 100644
--- a/arch/blackfin/mach-bf533/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf533/include/mach/gpio.h
@@ -28,4 +28,6 @@
 
 #define PORT_F GPIO_PF0
 
+#include <mach-common/ports-f.h>
+
 #endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf533/include/mach/pll.h b/arch/blackfin/mach-bf533/include/mach/pll.h
index 169c106d0ed..94cca674d83 100644
--- a/arch/blackfin/mach-bf533/include/mach/pll.h
+++ b/arch/blackfin/mach-bf533/include/mach/pll.h
@@ -1,57 +1 @@
-/*
- * Copyright 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#ifndef _MACH_PLL_H
-#define _MACH_PLL_H
-
-#include <asm/blackfin.h>
-#include <asm/irqflags.h>
-
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-	unsigned long flags, iwr;
-
-	if (val == bfin_read_PLL_CTL())
-		return;
-
-	flags = hard_local_irq_save();
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr = bfin_read32(SIC_IWR);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
-	bfin_write16(PLL_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR, iwr);
-	hard_local_irq_restore(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-	unsigned long flags, iwr;
-
-	if (val == bfin_read_VR_CTL())
-		return;
-
-	flags = hard_local_irq_save();
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr = bfin_read32(SIC_IWR);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
-	bfin_write16(VR_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR, iwr);
-	hard_local_irq_restore(flags);
-}
-
-#endif /* _MACH_PLL_H */
+#include <mach-common/pll.h>