Blackfin: bfin_serial.h: unify heavily duplicated serial code

Each Blackfin port has been duplicating UART structures and defines when
there really is no need for it.  So start a new bfin_serial.h header to
unify all these pieces and give ourselves a fresh start.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

4 files changed, 16 insertions, 164 deletions

diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial.h
new file mode 100644
index 00000000000..08072c86d5d
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	1
+
+#endif
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index e33e158bc16..3a6947456cf 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -4,36 +4,9 @@
  * Licensed under the GPL-2 or later.
  */
 
-#include <linux/serial.h>
 #include <asm/dma.h>
 #include <asm/portmux.h>
 
-#define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
-#define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
-#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
-#define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
-#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
-#define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
-
-#define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
-#define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
-#define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
-#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
-#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
-#define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
-#define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
-#define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
-
-#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
-#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
-#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
-#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
-
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN
@@ -44,51 +17,6 @@
 # endif
 #endif
 
-#define BFIN_UART_TX_FIFO_SIZE	2
-
-struct bfin_serial_port {
-        struct uart_port        port;
-        unsigned int            old_status;
-	int			status_irq;
-	unsigned int lsr;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	int			tx_done;
-	int			tx_count;
-	struct circ_buf		rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int			rx_dma_nrows;
-	unsigned int		tx_dma_channel;
-	unsigned int		rx_dma_channel;
-	struct work_struct	tx_dma_workqueue;
-#else
-# if ANOMALY_05000363
-	unsigned int anomaly_threshold;
-# endif
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	struct timer_list       cts_timer;
-	int			cts_pin;
-	int			rts_pin;
-#endif
-};
-
-/* The hardware clears the LSR bits upon read, so we need to cache
- * some of the more fun bits in software so they don't get lost
- * when checking the LSR in other code paths (TX).
- */
-static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
-{
-	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
-	uart->lsr |= (lsr & (BI|FE|PE|OE));
-	return lsr | uart->lsr;
-}
-
-static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
-{
-	uart->lsr = 0;
-	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
-}
-
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -120,3 +48,5 @@ struct bfin_serial_res bfin_serial_resource[] = {
 };
 
 #define DRIVER_NAME "bfin-uart"
+
+#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
index 6c7dc58c018..891cb599aa6 100644
--- a/arch/blackfin/mach-bf561/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h
@@ -35,19 +35,4 @@
 #define bfin_read_SICB_ISR(x)		bfin_read32(__SIC_MUX(SICB_ISR0, x))
 #define bfin_write_SICB_ISR(x, val)	bfin_write32(__SIC_MUX(SICB_ISR0, x), val)
 
-#define BFIN_UART_NR_PORTS      1
-
-#define OFFSET_THR              0x00	/* Transmit Holding register            */
-#define OFFSET_RBR              0x00	/* Receive Buffer register              */
-#define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
-#define OFFSET_IER              0x04	/* Interrupt Enable Register            */
-#define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
-#define OFFSET_IIR              0x08	/* Interrupt Identification Register    */
-#define OFFSET_LCR              0x0C	/* Line Control Register                */
-#define OFFSET_MCR              0x10	/* Modem Control Register               */
-#define OFFSET_LSR              0x14	/* Line Status Register                 */
-#define OFFSET_MSR              0x18	/* Modem Status Register                */
-#define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
-#define OFFSET_GCTL             0x24	/* Global Control Register              */
-
 #endif				/* _MACH_BLACKFIN_H_ */
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index 79e048d452e..bfc9180695f 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -927,83 +927,6 @@
 #define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
 #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
 
-/* ***************************** UART CONTROLLER MASKS ********************** */
-
-/* UART_LCR Register */
-
-#define DLAB	0x80
-#define SB      0x40
-#define STP      0x20
-#define EPS     0x10
-#define PEN	0x08
-#define STB	0x04
-#define WLS(x)	((x-5) & 0x03)
-
-#define DLAB_P	0x07
-#define SB_P	0x06
-#define STP_P	0x05
-#define EPS_P	0x04
-#define PEN_P	0x03
-#define STB_P	0x02
-#define WLS_P1	0x01
-#define WLS_P0	0x00
-
-/* UART_MCR Register */
-#define LOOP_ENA	0x10
-#define LOOP_ENA_P	0x04
-
-/* UART_LSR Register */
-#define TEMT	0x40
-#define THRE	0x20
-#define BI	0x10
-#define FE	0x08
-#define PE	0x04
-#define OE	0x02
-#define DR	0x01
-
-#define TEMP_P	0x06
-#define THRE_P	0x05
-#define BI_P	0x04
-#define FE_P	0x03
-#define PE_P	0x02
-#define OE_P	0x01
-#define DR_P	0x00
-
-/* UART_IER Register */
-#define ELSI	0x04
-#define ETBEI	0x02
-#define ERBFI	0x01
-
-#define ELSI_P	0x02
-#define ETBEI_P	0x01
-#define ERBFI_P	0x00
-
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define NINT		0x01
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-#define NINT_P		0x00
-#define IIR_TX_READY    0x02	/* UART_THR empty                               */
-#define IIR_RX_READY    0x04	/* Receive data ready                           */
-#define IIR_LINE_CHANGE 0x06	/* Receive line status                          */
-#define IIR_STATUS	0x06
-
-/* UART_GCTL Register */
-#define FFE	0x20
-#define FPE	0x10
-#define RPOLC	0x08
-#define TPOLC	0x04
-#define IREN	0x02
-#define UCEN	0x01
-
-#define FFE_P	0x05
-#define FPE_P	0x04
-#define RPOLC_P	0x03
-#define TPOLC_P	0x02
-#define IREN_P	0x01
-#define UCEN_P	0x00
-
 /*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
 
 /*  PPI_CONTROL Masks         */