Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 147 insertions, 558 deletions

diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index bff0824cf8a..c34785dca92 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -4,16 +4,11 @@
  * This driver is mostly used for bringup purposes and will go away.
  * It has a strong dependency on the system console. All outputs
  * are rerouted to the same facility as the one used by printk which, in our
- * case means sys_sim.c console (goes via the simulator). The code hereafter
- * is completely leveraged from the serial.c driver.
+ * case means sys_sim.c console (goes via the simulator).
  *
  * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
  *	Stephane Eranian <eranian@hpl.hp.com>
  *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 02/04/00 D. Mosberger	Merged in serial.c bug fixes in rs_close().
- * 02/25/00 D. Mosberger	Synced up with 2.3.99pre-5 version of serial.c.
- * 07/30/02 D. Mosberger	Replace sti()/cli() with explicit spinlocks & local irq masking
  */
 
 #include <linux/init.h>
@@ -27,15 +22,17 @@
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/capability.h>
+#include <linux/circ_buf.h>
 #include <linux/console.h>
+#include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/serial.h>
-#include <linux/serialP.h>
 #include <linux/sysrq.h>
+#include <linux/uaccess.h>
+
+#include <asm/hpsim.h>
 
-#include <asm/irq.h>
-#include <asm/hw_irq.h>
-#include <asm/uaccess.h>
+#include "hpsim_ssc.h"
 
 #undef SIMSERIAL_DEBUG	/* define this to get some debug information */
 
@@ -43,118 +40,44 @@
 
 #define NR_PORTS	1	/* only one port for now */
 
-#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED)
-
-#define SSC_GETCHAR	21
-
-extern long ia64_ssc (long, long, long, long, int);
-extern void ia64_ssc_connect_irq (long intr, long irq);
-
-static char *serial_name = "SimSerial driver";
-static char *serial_version = "0.6";
-
-/*
- * This has been extracted from asm/serial.h. We need one eventually but
- * I don't know exactly what we're going to put in it so just fake one
- * for now.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-/*
- * Most of the values here are meaningless to this particular driver.
- * However some values must be preserved for the code (leveraged from serial.c
- * to work correctly).
- * port must not be 0
- * type must not be UNKNOWN
- * So I picked arbitrary (guess from where?) values instead
- */
-static struct serial_state rs_table[NR_PORTS]={
-  /* UART CLK   PORT IRQ     FLAGS        */
-  { 0, BASE_BAUD, 0x3F8, 0, STD_COM_FLAGS,0,PORT_16550 }  /* ttyS0 */
+struct serial_state {
+	struct tty_port port;
+	struct circ_buf xmit;
+	int irq;
+	int x_char;
 };
 
-/*
- * Just for the fun of it !
- */
-static struct serial_uart_config uart_config[] = {
-	{ "unknown", 1, 0 },
-	{ "8250", 1, 0 },
-	{ "16450", 1, 0 },
-	{ "16550", 1, 0 },
-	{ "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
-	{ "cirrus", 1, 0 },
-	{ "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
-	{ "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO |
-		  UART_STARTECH },
-	{ "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO},
-	{ NULL, 0}
-};
+static struct serial_state rs_table[NR_PORTS];
 
 struct tty_driver *hp_simserial_driver;
 
-static struct async_struct *IRQ_ports[NR_IRQS];
-
 static struct console *console;
 
-static unsigned char *tmp_buf;
-
-extern struct console *console_drivers; /* from kernel/printk.c */
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void rs_stop(struct tty_struct *tty)
-{
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_stop: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
-		tty->stopped, tty->hw_stopped, tty->flow_stopped);
-#endif
-
-}
-
-static void rs_start(struct tty_struct *tty)
-{
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
-		tty->stopped, tty->hw_stopped, tty->flow_stopped);
-#endif
-}
-
-static  void receive_chars(struct tty_struct *tty)
+static void receive_chars(struct tty_struct *tty)
 {
 	unsigned char ch;
 	static unsigned char seen_esc = 0;
 
 	while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
-		if ( ch == 27 && seen_esc == 0 ) {
+		if (ch == 27 && seen_esc == 0) {
 			seen_esc = 1;
 			continue;
-		} else {
-			if ( seen_esc==1 && ch == 'O' ) {
-				seen_esc = 2;
-				continue;
-			} else if ( seen_esc == 2 ) {
-				if ( ch == 'P' ) /* F1 */
-					show_state();
+		} else if (seen_esc == 1 && ch == 'O') {
+			seen_esc = 2;
+			continue;
+		} else if (seen_esc == 2) {
+			if (ch == 'P') /* F1 */
+				show_state();
 #ifdef CONFIG_MAGIC_SYSRQ
-				if ( ch == 'S' ) { /* F4 */
-					do
-						ch = ia64_ssc(0, 0, 0, 0,
-							      SSC_GETCHAR);
-					while (!ch);
-					handle_sysrq(ch);
-				}
-#endif
-				seen_esc = 0;
-				continue;
+			if (ch == 'S') { /* F4 */
+				do {
+					ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR);
+				} while (!ch);
+				handle_sysrq(ch);
 			}
+#endif
+			seen_esc = 0;
+			continue;
 		}
 		seen_esc = 0;
 
@@ -169,22 +92,19 @@ static  void receive_chars(struct tty_struct *tty)
  */
 static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
 {
-	struct async_struct * info;
+	struct serial_state *info = dev_id;
+	struct tty_struct *tty = tty_port_tty_get(&info->port);
 
-	/*
-	 * I don't know exactly why they don't use the dev_id opaque data
-	 * pointer instead of this extra lookup table
-	 */
-	info = IRQ_ports[irq];
-	if (!info || !info->tty) {
-		printk(KERN_INFO "simrs_interrupt_single: info|tty=0 info=%p problem\n", info);
+	if (!tty) {
+		printk(KERN_INFO "%s: tty=0 problem\n", __func__);
 		return IRQ_NONE;
 	}
 	/*
 	 * pretty simple in our case, because we only get interrupts
 	 * on inbound traffic
 	 */
-	receive_chars(info->tty);
+	receive_chars(tty);
+	tty_kref_put(tty);
 	return IRQ_HANDLED;
 }
 
@@ -194,17 +114,12 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
  * -------------------------------------------------------------------
  */
 
-static void do_softint(struct work_struct *private_)
-{
-	printk(KERN_ERR "simserial: do_softint called\n");
-}
-
 static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
-	if (!tty || !info->xmit.buf)
+	if (!info->xmit.buf)
 		return 0;
 
 	local_irq_save(flags);
@@ -218,12 +133,12 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 	return 1;
 }
 
-static void transmit_chars(struct async_struct *info, int *intr_done)
+static void transmit_chars(struct tty_struct *tty, struct serial_state *info,
+		int *intr_done)
 {
 	int count;
 	unsigned long flags;
 
-
 	local_irq_save(flags);
 
 	if (info->x_char) {
@@ -231,16 +146,16 @@ static void transmit_chars(struct async_struct *info, int *intr_done)
 
 		console->write(console, &c, 1);
 
-		info->state->icount.tx++;
 		info->x_char = 0;
 
 		goto out;
 	}
 
-	if (info->xmit.head == info->xmit.tail || info->tty->stopped || info->tty->hw_stopped) {
+	if (info->xmit.head == info->xmit.tail || tty->stopped ||
+			tty->hw_stopped) {
 #ifdef SIMSERIAL_DEBUG
 		printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
-		       info->xmit.head, info->xmit.tail, info->tty->stopped);
+		       info->xmit.head, info->xmit.tail, tty->stopped);
 #endif
 		goto out;
 	}
@@ -272,24 +187,24 @@ out:
 
 static void rs_flush_chars(struct tty_struct *tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
-	if (info->xmit.head == info->xmit.tail || tty->stopped || tty->hw_stopped ||
-	    !info->xmit.buf)
+	if (info->xmit.head == info->xmit.tail || tty->stopped ||
+			tty->hw_stopped || !info->xmit.buf)
 		return;
 
-	transmit_chars(info, NULL);
+	transmit_chars(tty, info, NULL);
 }
 
-
 static int rs_write(struct tty_struct * tty,
 		    const unsigned char *buf, int count)
 {
+	struct serial_state *info = tty->driver_data;
 	int	c, ret = 0;
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
 	unsigned long flags;
 
-	if (!tty || !info->xmit.buf || !tmp_buf) return 0;
+	if (!info->xmit.buf)
+		return 0;
 
 	local_irq_save(flags);
 	while (1) {
@@ -310,30 +225,30 @@ static int rs_write(struct tty_struct * tty,
 	/*
 	 * Hey, we transmit directly from here in our case
 	 */
-	if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE)
-	    && !tty->stopped && !tty->hw_stopped) {
-		transmit_chars(info, NULL);
-	}
+	if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) &&
+			!tty->stopped && !tty->hw_stopped)
+		transmit_chars(tty, info, NULL);
+
 	return ret;
 }
 
 static int rs_write_room(struct tty_struct *tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
 }
 
 static int rs_chars_in_buffer(struct tty_struct *tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
 }
 
 static void rs_flush_buffer(struct tty_struct *tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
 	local_irq_save(flags);
@@ -349,7 +264,7 @@ static void rs_flush_buffer(struct tty_struct *tty)
  */
 static void rs_send_xchar(struct tty_struct *tty, char ch)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	info->x_char = ch;
 	if (ch) {
@@ -357,7 +272,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
 		 * I guess we could call console->write() directly but
 		 * let's do that for now.
 		 */
-		transmit_chars(info, NULL);
+		transmit_chars(tty, info, NULL);
 	}
 }
 
@@ -371,14 +286,15 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
  */
 static void rs_throttle(struct tty_struct * tty)
 {
-	if (I_IXOFF(tty)) rs_send_xchar(tty, STOP_CHAR(tty));
+	if (I_IXOFF(tty))
+		rs_send_xchar(tty, STOP_CHAR(tty));
 
 	printk(KERN_INFO "simrs_throttle called\n");
 }
 
 static void rs_unthrottle(struct tty_struct * tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	if (I_IXOFF(tty)) {
 		if (info->x_char)
@@ -389,7 +305,6 @@ static void rs_unthrottle(struct tty_struct * tty)
 	printk(KERN_INFO "simrs_unthrottle called\n");
 }
 
-
 static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 {
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
@@ -400,48 +315,21 @@ static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 	}
 
 	switch (cmd) {
-		case TIOCGSERIAL:
-			printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
-			return 0;
-		case TIOCSSERIAL:
-			printk(KERN_INFO "simrs_ioctl TIOCSSERIAL called\n");
-			return 0;
-		case TIOCSERCONFIG:
-			printk(KERN_INFO "rs_ioctl: TIOCSERCONFIG called\n");
-			return -EINVAL;
-
-		case TIOCSERGETLSR: /* Get line status register */
-			printk(KERN_INFO "rs_ioctl: TIOCSERGETLSR called\n");
-			return  -EINVAL;
-
-		case TIOCSERGSTRUCT:
-			printk(KERN_INFO "rs_ioctl: TIOCSERGSTRUCT called\n");
-#if 0
-			if (copy_to_user((struct async_struct *) arg,
-					 info, sizeof(struct async_struct)))
-				return -EFAULT;
-#endif
-			return 0;
-
-		/*
-		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-		 * - mask passed in arg for lines of interest
-		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-		 * Caller should use TIOCGICOUNT to see which one it was
-		 */
-		case TIOCMIWAIT:
-			printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
-			return 0;
-		case TIOCSERGWILD:
-		case TIOCSERSWILD:
-			/* "setserial -W" is called in Debian boot */
-			printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n");
-			return 0;
-
-		default:
-			return -ENOIOCTLCMD;
-		}
-	return 0;
+	case TIOCGSERIAL:
+	case TIOCSSERIAL:
+	case TIOCSERGSTRUCT:
+	case TIOCMIWAIT:
+		return 0;
+	case TIOCSERCONFIG:
+	case TIOCSERGETLSR: /* Get line status register */
+		return -EINVAL;
+	case TIOCSERGWILD:
+	case TIOCSERSWILD:
+		/* "setserial -W" is called in Debian boot */
+		printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n");
+		return 0;
+	}
+	return -ENOIOCTLCMD;
 }
 
 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
@@ -452,220 +340,50 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	if ((old_termios->c_cflag & CRTSCTS) &&
 	    !(tty->termios->c_cflag & CRTSCTS)) {
 		tty->hw_stopped = 0;
-		rs_start(tty);
 	}
 }
 /*
  * This routine will shutdown a serial port; interrupts are disabled, and
  * DTR is dropped if the hangup on close termio flag is on.
  */
-static void shutdown(struct async_struct * info)
+static void shutdown(struct tty_port *port)
 {
-	unsigned long	flags;
-	struct serial_state *state;
-	int		retval;
-
-	if (!(info->flags & ASYNC_INITIALIZED)) return;
-
-	state = info->state;
-
-#ifdef SIMSERIAL_DEBUG
-	printk("Shutting down serial port %d (irq %d)....", info->line,
-	       state->irq);
-#endif
+	struct serial_state *info = container_of(port, struct serial_state,
+			port);
+	unsigned long flags;
 
 	local_irq_save(flags);
-	{
-		/*
-		 * First unlink the serial port from the IRQ chain...
-		 */
-		if (info->next_port)
-			info->next_port->prev_port = info->prev_port;
-		if (info->prev_port)
-			info->prev_port->next_port = info->next_port;
-		else
-			IRQ_ports[state->irq] = info->next_port;
-
-		/*
-		 * Free the IRQ, if necessary
-		 */
-		if (state->irq && (!IRQ_ports[state->irq] ||
-				   !IRQ_ports[state->irq]->next_port)) {
-			if (IRQ_ports[state->irq]) {
-				free_irq(state->irq, NULL);
-				retval = request_irq(state->irq, rs_interrupt_single,
-						     IRQ_T(info), "serial", NULL);
-
-				if (retval)
-					printk(KERN_ERR "serial shutdown: request_irq: error %d"
-					       "  Couldn't reacquire IRQ.\n", retval);
-			} else
-				free_irq(state->irq, NULL);
-		}
-
-		if (info->xmit.buf) {
-			free_page((unsigned long) info->xmit.buf);
-			info->xmit.buf = NULL;
-		}
-
-		if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->irq)
+		free_irq(info->irq, info);
 
-		info->flags &= ~ASYNC_INITIALIZED;
+	if (info->xmit.buf) {
+		free_page((unsigned long) info->xmit.buf);
+		info->xmit.buf = NULL;
 	}
 	local_irq_restore(flags);
 }
 
-/*
- * ------------------------------------------------------------
- * rs_close()
- *
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
 static void rs_close(struct tty_struct *tty, struct file * filp)
 {
-	struct async_struct * info = (struct async_struct *)tty->driver_data;
-	struct serial_state *state;
-	unsigned long flags;
-
-	if (!info ) return;
-
-	state = info->state;
-
-	local_irq_save(flags);
-	if (tty_hung_up_p(filp)) {
-#ifdef SIMSERIAL_DEBUG
-		printk("rs_close: hung_up\n");
-#endif
-		local_irq_restore(flags);
-		return;
-	}
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_close ttys%d, count = %d\n", info->line, state->count);
-#endif
-	if ((tty->count == 1) && (state->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  state->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk(KERN_ERR "rs_close: bad serial port count; tty->count is 1, "
-		       "state->count is %d\n", state->count);
-		state->count = 1;
-	}
-	if (--state->count < 0) {
-		printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
-		       info->line, state->count);
-		state->count = 0;
-	}
-	if (state->count) {
-		local_irq_restore(flags);
-		return;
-	}
-	info->flags |= ASYNC_CLOSING;
-	local_irq_restore(flags);
+	struct serial_state *info = tty->driver_data;
 
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	shutdown(info);
-	rs_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	info->event = 0;
-	info->tty = NULL;
-	if (info->blocked_open) {
-		if (info->close_delay)
-			schedule_timeout_interruptible(info->close_delay);
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
+	tty_port_close(&info->port, tty, filp);
 }
 
-/*
- * rs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-}
-
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
 static void rs_hangup(struct tty_struct *tty)
 {
-	struct async_struct * info = (struct async_struct *)tty->driver_data;
-	struct serial_state *state = info->state;
-
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_hangup: called\n");
-#endif
-
-	state = info->state;
+	struct serial_state *info = tty->driver_data;
 
 	rs_flush_buffer(tty);
-	if (info->flags & ASYNC_CLOSING)
-		return;
-	shutdown(info);
-
-	info->event = 0;
-	state->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->tty = NULL;
-	wake_up_interruptible(&info->open_wait);
+	tty_port_hangup(&info->port);
 }
 
-
-static int get_async_struct(int line, struct async_struct **ret_info)
+static int activate(struct tty_port *port, struct tty_struct *tty)
 {
-	struct async_struct *info;
-	struct serial_state *sstate;
-
-	sstate = rs_table + line;
-	sstate->count++;
-	if (sstate->info) {
-		*ret_info = sstate->info;
-		return 0;
-	}
-	info = kzalloc(sizeof(struct async_struct), GFP_KERNEL);
-	if (!info) {
-		sstate->count--;
-		return -ENOMEM;
-	}
-	init_waitqueue_head(&info->open_wait);
-	init_waitqueue_head(&info->close_wait);
-	init_waitqueue_head(&info->delta_msr_wait);
-	info->magic = SERIAL_MAGIC;
-	info->port = sstate->port;
-	info->flags = sstate->flags;
-	info->xmit_fifo_size = sstate->xmit_fifo_size;
-	info->line = line;
-	INIT_WORK(&info->work, do_softint);
-	info->state = sstate;
-	if (sstate->info) {
-		kfree(info);
-		*ret_info = sstate->info;
-		return 0;
-	}
-	*ret_info = sstate->info = info;
-	return 0;
-}
-
-static int
-startup(struct async_struct *info)
-{
-	unsigned long flags;
-	int	retval=0;
-	irq_handler_t handler;
-	struct serial_state *state= info->state;
-	unsigned long page;
+	struct serial_state *state = container_of(port, struct serial_state,
+			port);
+	unsigned long flags, page;
+	int retval = 0;
 
 	page = get_zeroed_page(GFP_KERNEL);
 	if (!page)
@@ -673,86 +391,31 @@ startup(struct async_struct *info)
 
 	local_irq_save(flags);
 
-	if (info->flags & ASYNC_INITIALIZED) {
-		free_page(page);
-		goto errout;
-	}
-
-	if (!state->port || !state->type) {
-		if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
-		free_page(page);
-		goto errout;
-	}
-	if (info->xmit.buf)
+	if (state->xmit.buf)
 		free_page(page);
 	else
-		info->xmit.buf = (unsigned char *) page;
-
-#ifdef SIMSERIAL_DEBUG
-	printk("startup: ttys%d (irq %d)...", info->line, state->irq);
-#endif
+		state->xmit.buf = (unsigned char *) page;
 
-	/*
-	 * Allocate the IRQ if necessary
-	 */
-	if (state->irq && (!IRQ_ports[state->irq] ||
-			  !IRQ_ports[state->irq]->next_port)) {
-		if (IRQ_ports[state->irq]) {
-			retval = -EBUSY;
-			goto errout;
-		} else
-			handler = rs_interrupt_single;
-
-		retval = request_irq(state->irq, handler, IRQ_T(info), "simserial", NULL);
-		if (retval) {
-			if (capable(CAP_SYS_ADMIN)) {
-				if (info->tty)
-					set_bit(TTY_IO_ERROR,
-						&info->tty->flags);
-				retval = 0;
-			}
+	if (state->irq) {
+		retval = request_irq(state->irq, rs_interrupt_single, 0,
+				"simserial", state);
+		if (retval)
 			goto errout;
-		}
 	}
 
-	/*
-	 * Insert serial port into IRQ chain.
-	 */
-	info->prev_port = NULL;
-	info->next_port = IRQ_ports[state->irq];
-	if (info->next_port)
-		info->next_port->prev_port = info;
-	IRQ_ports[state->irq] = info;
-
-	if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags);
-
-	info->xmit.head = info->xmit.tail = 0;
-
-#if 0
-	/*
-	 * Set up serial timers...
-	 */
-	timer_table[RS_TIMER].expires = jiffies + 2*HZ/100;
-	timer_active |= 1 << RS_TIMER;
-#endif
+	state->xmit.head = state->xmit.tail = 0;
 
 	/*
 	 * Set up the tty->alt_speed kludge
 	 */
-	if (info->tty) {
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			info->tty->alt_speed = 57600;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			info->tty->alt_speed = 115200;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			info->tty->alt_speed = 230400;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			info->tty->alt_speed = 460800;
-	}
-
-	info->flags |= ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-	return 0;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+		tty->alt_speed = 57600;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+		tty->alt_speed = 115200;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+		tty->alt_speed = 230400;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+		tty->alt_speed = 460800;
 
 errout:
 	local_irq_restore(flags);
@@ -768,56 +431,11 @@ errout:
  */
 static int rs_open(struct tty_struct *tty, struct file * filp)
 {
-	struct async_struct	*info;
-	int			retval, line;
-	unsigned long		page;
+	struct serial_state *info = rs_table + tty->index;
+	struct tty_port *port = &info->port;
 
-	line = tty->index;
-	if ((line < 0) || (line >= NR_PORTS))
-		return -ENODEV;
-	retval = get_async_struct(line, &info);
-	if (retval)
-		return retval;
 	tty->driver_data = info;
-	info->tty = tty;
-
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_open %s, count = %d\n", tty->name, info->state->count);
-#endif
-	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
-	if (!tmp_buf) {
-		page = get_zeroed_page(GFP_KERNEL);
-		if (!page)
-			return -ENOMEM;
-		if (tmp_buf)
-			free_page(page);
-		else
-			tmp_buf = (unsigned char *) page;
-	}
-
-	/*
-	 * If the port is the middle of closing, bail out now
-	 */
-	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		return ((info->flags & ASYNC_HUP_NOTIFY) ?
-			-EAGAIN : -ERESTARTSYS);
-#else
-		return -EAGAIN;
-#endif
-	}
-
-	/*
-	 * Start up serial port
-	 */
-	retval = startup(info);
-	if (retval) {
-		return retval;
-	}
+	tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	/*
 	 * figure out which console to use (should be one already)
@@ -828,30 +446,21 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 		console = console->next;
 	}
 
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_open ttys%d successful\n", info->line);
-#endif
-	return 0;
+	return tty_port_open(port, tty, filp);
 }
 
 /*
  * /proc fs routines....
  */
 
-static inline void line_info(struct seq_file *m, struct serial_state *state)
-{
-	seq_printf(m, "%d: uart:%s port:%lX irq:%d\n",
-		       state->line, uart_config[state->type].name,
-		       state->port, state->irq);
-}
-
 static int rs_proc_show(struct seq_file *m, void *v)
 {
 	int i;
 
-	seq_printf(m, "simserinfo:1.0 driver:%s\n", serial_version);
+	seq_printf(m, "simserinfo:1.0\n");
 	for (i = 0; i < NR_PORTS; i++)
-		line_info(m, &rs_table[i]);
+		seq_printf(m, "%d: uart:16550 port:3F8 irq:%d\n",
+		       i, rs_table[i].irq);
 	return 0;
 }
 
@@ -868,25 +477,6 @@ static const struct file_operations rs_proc_fops = {
 	.release	= single_release,
 };
 
-/*
- * ---------------------------------------------------------------------
- * rs_init() and friends
- *
- * rs_init() is called at boot-time to initialize the serial driver.
- * ---------------------------------------------------------------------
- */
-
-/*
- * This routine prints out the appropriate serial driver version
- * number, and identifies which options were configured into this
- * driver.
- */
-static inline void show_serial_version(void)
-{
-	printk(KERN_INFO "%s version %s with", serial_name, serial_version);
-	printk(KERN_INFO " no serial options enabled\n");
-}
-
 static const struct tty_operations hp_ops = {
 	.open = rs_open,
 	.close = rs_close,
@@ -901,34 +491,31 @@ static const struct tty_operations hp_ops = {
 	.unthrottle = rs_unthrottle,
 	.send_xchar = rs_send_xchar,
 	.set_termios = rs_set_termios,
-	.stop = rs_stop,
-	.start = rs_start,
 	.hangup = rs_hangup,
-	.wait_until_sent = rs_wait_until_sent,
 	.proc_fops = &rs_proc_fops,
 };
 
-/*
- * The serial driver boot-time initialization code!
- */
-static int __init
-simrs_init (void)
+static const struct tty_port_operations hp_port_ops = {
+	.activate = activate,
+	.shutdown = shutdown,
+};
+
+static int __init simrs_init(void)
 {
-	int			i, rc;
-	struct serial_state	*state;
+	struct serial_state *state;
+	int retval;
 
 	if (!ia64_platform_is("hpsim"))
 		return -ENODEV;
 
-	hp_simserial_driver = alloc_tty_driver(1);
+	hp_simserial_driver = alloc_tty_driver(NR_PORTS);
 	if (!hp_simserial_driver)
 		return -ENOMEM;
 
-	show_serial_version();
+	printk(KERN_INFO "SimSerial driver with no serial options enabled\n");
 
 	/* Initialize the tty_driver structure */
 
-	hp_simserial_driver->owner = THIS_MODULE;
 	hp_simserial_driver->driver_name = "simserial";
 	hp_simserial_driver->name = "ttyS";
 	hp_simserial_driver->major = TTY_MAJOR;
@@ -941,31 +528,33 @@ simrs_init (void)
 	hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(hp_simserial_driver, &hp_ops);
 
-	/*
-	 * Let's have a little bit of fun !
-	 */
-	for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
+	state = rs_table;
+	tty_port_init(&state->port);
+	state->port.ops = &hp_port_ops;
+	state->port.close_delay = 0; /* XXX really 0? */
 
-		if (state->type == PORT_UNKNOWN) continue;
+	retval = hpsim_get_irq(KEYBOARD_INTR);
+	if (retval < 0) {
+		printk(KERN_ERR "%s: out of interrupt vectors!\n",
+				__func__);
+		goto err_free_tty;
+	}
 
-		if (!state->irq) {
-			if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
-				panic("%s: out of interrupt vectors!\n",
-				      __func__);
-			state->irq = rc;
-			ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
-		}
+	state->irq = retval;
 
-		printk(KERN_INFO "ttyS%d at 0x%04lx (irq = %d) is a %s\n",
-		       state->line,
-		       state->port, state->irq,
-		       uart_config[state->type].name);
-	}
+	/* the port is imaginary */
+	printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
 
-	if (tty_register_driver(hp_simserial_driver))
-		panic("Couldn't register simserial driver\n");
+	retval = tty_register_driver(hp_simserial_driver);
+	if (retval) {
+		printk(KERN_ERR "Couldn't register simserial driver\n");
+		goto err_free_tty;
+	}
 
 	return 0;
+err_free_tty:
+	put_tty_driver(hp_simserial_driver);
+	return retval;
 }
 
 #ifndef MODULE