[IA64] cpu hotplug: return offlined cpus to SAL

This patch is required to support cpu removal for IPF systems. Existing code
just fakes the real offline by keeping it run the idle thread, and polling
for the bit to re-appear in the cpu_state to get out of the idle loop.

For the cpu-offline to work correctly, we need to pass control of this CPU 
back to SAL so it can continue in the boot-rendez mode. This gives the
SAL control to not pick this cpu as the monarch processor for global MCA
events, and addition does not wait for this cpu to checkin with SAL
for global MCA events as well. The handoff is implemented as documented in 
SAL specification section 3.2.5.1 "OS_BOOT_RENDEZ to SAL return State"

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

1 files changed, 53 insertions, 35 deletions

diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index cf3f8014f9a..ef3fd7265b6 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -110,46 +110,19 @@
 	.global ia64_os_mca_dispatch_end
 	.global ia64_sal_to_os_handoff_state
 	.global	ia64_os_to_sal_handoff_state
+	.global ia64_do_tlb_purge
 
 	.text
 	.align 16
 
-ia64_os_mca_dispatch:
-
-	// Serialize all MCA processing
-	mov	r3=1;;
-	LOAD_PHYSICAL(p0,r2,ia64_mca_serialize);;
-ia64_os_mca_spin:
-	xchg8	r4=[r2],r3;;
-	cmp.ne	p6,p0=r4,r0
-(p6)	br ia64_os_mca_spin
-
-	// Save the SAL to OS MCA handoff state as defined
-	// by SAL SPEC 3.0
-	// NOTE : The order in which the state gets saved
-	//	  is dependent on the way the C-structure
-	//	  for ia64_mca_sal_to_os_state_t has been
-	//	  defined in include/asm/mca.h
-	SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2)
-	;;
-
-	// LOG PROCESSOR STATE INFO FROM HERE ON..
-begin_os_mca_dump:
-	br	ia64_os_mca_proc_state_dump;;
-
-ia64_os_mca_done_dump:
-
-	LOAD_PHYSICAL(p0,r16,ia64_sal_to_os_handoff_state+56)
-	;;
-	ld8 r18=[r16]		// Get processor state parameter on existing PALE_CHECK.
-	;;
-	tbit.nz p6,p7=r18,60
-(p7)	br.spnt done_tlb_purge_and_reload
-
-	// The following code purges TC and TR entries. Then reload all TC entries.
-	// Purge percpu data TC entries.
-begin_tlb_purge_and_reload:
+/*
+ * Just the TLB purge part is moved to a separate function
+ * so we can re-use the code for cpu hotplug code as well
+ * Caller should now setup b1, so we can branch once the
+ * tlb flush is complete.
+ */
 
+ia64_do_tlb_purge:
 #define O(member)	IA64_CPUINFO_##member##_OFFSET
 
 	GET_THIS_PADDR(r2, cpu_info)	// load phys addr of cpu_info into r2
@@ -230,6 +203,51 @@ begin_tlb_purge_and_reload:
 	;;
 	srlz.i
 	;;
+	// Now branch away to caller.
+	br.sptk.many b1
+	;;
+
+ia64_os_mca_dispatch:
+
+	// Serialize all MCA processing
+	mov	r3=1;;
+	LOAD_PHYSICAL(p0,r2,ia64_mca_serialize);;
+ia64_os_mca_spin:
+	xchg8	r4=[r2],r3;;
+	cmp.ne	p6,p0=r4,r0
+(p6)	br ia64_os_mca_spin
+
+	// Save the SAL to OS MCA handoff state as defined
+	// by SAL SPEC 3.0
+	// NOTE : The order in which the state gets saved
+	//	  is dependent on the way the C-structure
+	//	  for ia64_mca_sal_to_os_state_t has been
+	//	  defined in include/asm/mca.h
+	SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2)
+	;;
+
+	// LOG PROCESSOR STATE INFO FROM HERE ON..
+begin_os_mca_dump:
+	br	ia64_os_mca_proc_state_dump;;
+
+ia64_os_mca_done_dump:
+
+	LOAD_PHYSICAL(p0,r16,ia64_sal_to_os_handoff_state+56)
+	;;
+	ld8 r18=[r16]		// Get processor state parameter on existing PALE_CHECK.
+	;;
+	tbit.nz p6,p7=r18,60
+(p7)	br.spnt done_tlb_purge_and_reload
+
+	// The following code purges TC and TR entries. Then reload all TC entries.
+	// Purge percpu data TC entries.
+begin_tlb_purge_and_reload:
+	movl r18=ia64_reload_tr;;
+	LOAD_PHYSICAL(p0,r18,ia64_reload_tr);;
+	mov b1=r18;;
+	br.sptk.many ia64_do_tlb_purge;;
+
+ia64_reload_tr:
 	// Finally reload the TR registers.
 	// 1. Reload DTR/ITR registers for kernel.
 	mov r18=KERNEL_TR_PAGE_SHIFT<<2