m68k: merge mmu and non-mmu arch Makefiles

Most of the build logic is the same for the mmu and non-mmu m68k targets.
Merge the top level architecture Makefiles back into a single Makefile.

For the most part this is just adding the non-mmu processor types and
their specific cflags and other options into the mmu Makefile.

Note that all the BOARD setting logic that was in the non-mmu Makefile
is completely removed. It was no longer being used at all.

This has been build and run tested on ColdFire targets and ARAnyM.
It has been build tested on all the m68k defconfig targets using a
gcc-4.5.1 based toolchain.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

1 files changed, 0 insertions, 121 deletions

diff --git a/arch/m68k/Makefile_mm b/arch/m68k/Makefile_mm
deleted file mode 100644
index d449b6d5aec..00000000000
--- a/arch/m68k/Makefile_mm
+++ /dev/null
@@ -1,121 +0,0 @@
-#
-# m68k/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Hamish Macdonald
-#
-
-# override top level makefile
-AS += -m68020
-LDFLAGS := -m m68kelf
-KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
-ifneq ($(SUBARCH),$(ARCH))
-	ifeq ($(CROSS_COMPILE),)
-		CROSS_COMPILE := $(call cc-cross-prefix, \
-			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
-	endif
-endif
-
-ifdef CONFIG_SUN3
-LDFLAGS_vmlinux = -N
-endif
-
-CHECKFLAGS += -D__mc68000__
-
-# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
-KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2
-
-# enable processor switch if compiled only for a single cpu
-ifndef CONFIG_M68020
-ifndef CONFIG_M68030
-
-ifndef CONFIG_M68060
-KBUILD_CFLAGS += -m68040
-endif
-
-ifndef CONFIG_M68040
-KBUILD_CFLAGS += -m68060
-endif
-
-endif
-endif
-
-ifdef CONFIG_KGDB
-# If configured for kgdb support, include debugging infos and keep the
-# frame pointer
-KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
-endif
-
-ifndef CONFIG_SUN3
-head-y := arch/m68k/kernel/head.o
-else
-head-y := arch/m68k/kernel/sun3-head.o
-endif
-
-core-y				+= arch/m68k/kernel/	arch/m68k/mm/
-libs-y				+= arch/m68k/lib/
-
-core-$(CONFIG_Q40)		+= arch/m68k/q40/
-core-$(CONFIG_AMIGA)		+= arch/m68k/amiga/
-core-$(CONFIG_ATARI)		+= arch/m68k/atari/
-core-$(CONFIG_MAC)		+= arch/m68k/mac/
-core-$(CONFIG_HP300)		+= arch/m68k/hp300/
-core-$(CONFIG_APOLLO)		+= arch/m68k/apollo/
-core-$(CONFIG_MVME147)		+= arch/m68k/mvme147/
-core-$(CONFIG_MVME16x)		+= arch/m68k/mvme16x/
-core-$(CONFIG_BVME6000)		+= arch/m68k/bvme6000/
-core-$(CONFIG_SUN3X)		+= arch/m68k/sun3x/	arch/m68k/sun3/
-core-$(CONFIG_SUN3)		+= arch/m68k/sun3/	arch/m68k/sun3/prom/
-core-$(CONFIG_NATFEAT)		+= arch/m68k/emu/
-core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/
-core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/
-core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/
-
-all:	zImage
-
-lilo:	vmlinux
-	if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
-	if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
-	cat vmlinux > $(INSTALL_PATH)/vmlinux
-	cp System.map $(INSTALL_PATH)/System.map
-	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
-
-zImage compressed: vmlinux.gz
-
-vmlinux.gz: vmlinux
-
-ifndef CONFIG_KGDB
-	cp vmlinux vmlinux.tmp
-	$(STRIP) vmlinux.tmp
-	gzip -9c vmlinux.tmp >vmlinux.gz
-	rm vmlinux.tmp
-else
-	gzip -9c vmlinux >vmlinux.gz
-endif
-
-bzImage: vmlinux.bz2
-
-vmlinux.bz2: vmlinux
-
-ifndef CONFIG_KGDB
-	cp vmlinux vmlinux.tmp
-	$(STRIP) vmlinux.tmp
-	bzip2 -1c vmlinux.tmp >vmlinux.bz2
-	rm vmlinux.tmp
-else
-	bzip2 -1c vmlinux >vmlinux.bz2
-endif
-
-archclean:
-	rm -f vmlinux.gz vmlinux.bz2
-
-install:
-	sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"