m68knommu: move the 528x platform code into the common ColdFire code directory

All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

2 files changed, 0 insertions, 155 deletions

diff --git a/arch/m68k/platform/528x/Makefile b/arch/m68k/platform/528x/Makefile
deleted file mode 100644
index 8755c9e6c66..00000000000
--- a/arch/m68k/platform/528x/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o
-
diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c
deleted file mode 100644
index 7ed1276b29d..00000000000
--- a/arch/m68k/platform/528x/config.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/528x/config.c
- *
- *	Sub-architcture dependent initialization code for the Freescale
- *	5280, 5281 and 5282 CPUs.
- *
- *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(NQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
-	MCFGPS(TA, 8, 4, MCFGPTA_GPTDDR, MCFGPTA_GPTPORT, MCFGPTB_GPTPORT),
-	MCFGPS(TB, 16, 4, MCFGPTB_GPTDDR, MCFGPTB_GPTPORT, MCFGPTB_GPTPORT),
-	MCFGPS(QA, 24, 4, MCFQADC_DDRQA, MCFQADC_PORTQA, MCFQADC_PORTQA),
-	MCFGPS(QB, 32, 4, MCFQADC_DDRQB, MCFQADC_PORTQB, MCFQADC_PORTQB),
-	MCFGPF(A, 40, 8),
-	MCFGPF(B, 48, 8),
-	MCFGPF(C, 56, 8),
-	MCFGPF(D, 64, 8),
-	MCFGPF(E, 72, 8),
-	MCFGPF(F, 80, 8),
-	MCFGPF(G, 88, 8),
-	MCFGPF(H, 96, 8),
-	MCFGPF(J, 104, 8),
-	MCFGPF(DD, 112, 8),
-	MCFGPF(EH, 120, 8),
-	MCFGPF(EL, 128, 8),
-	MCFGPF(AS, 136, 6),
-	MCFGPF(QS, 144, 7),
-	MCFGPF(SD, 152, 6),
-	MCFGPF(TC, 160, 4),
-	MCFGPF(TD, 168, 4),
-	MCFGPF(UA, 176, 4),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m528x_qspi_init(void)
-{
-	/* setup Port QS for QSPI with gpio CS control */
-	__raw_writeb(0x07, MCFGPIO_PQSPAR);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-static void __init m528x_uarts_init(void)
-{
-	u8 port;
-
-	/* make sure PUAPAR is set for UART0 and UART1 */
-	port = readb(MCF5282_GPIO_PUAPAR);
-	port |= 0x03 | (0x03 << 2);
-	writeb(port, MCF5282_GPIO_PUAPAR);
-}
-
-/***************************************************************************/
-
-static void __init m528x_fec_init(void)
-{
-	u16 v16;
-
-	/* Set multi-function pins to ethernet mode for fec0 */
-	v16 = readw(MCF_IPSBAR + 0x100056);
-	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
-	writeb(0xc0, MCF_IPSBAR + 0x100058);
-}
-
-/***************************************************************************/
-
-#ifdef CONFIG_WILDFIRE
-void wildfire_halt(void)
-{
-	writeb(0, 0x30000007);
-	writeb(0x2, 0x30000007);
-}
-#endif
-
-#ifdef CONFIG_WILDFIREMOD
-void wildfiremod_halt(void)
-{
-	printk(KERN_INFO "WildFireMod hibernating...\n");
-
-	/* Set portE.5 to Digital IO */
-	MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
-
-	/* Make portE.5 an output */
-	MCF5282_GPIO_DDRE |= (1 << 5);
-
-	/* Now toggle portE.5 from low to high */
-	MCF5282_GPIO_PORTE &= ~(1 << 5);
-	MCF5282_GPIO_PORTE |= (1 << 5);
-
-	printk(KERN_EMERG "Failed to hibernate. Halting!\n");
-}
-#endif
-
-void __init config_BSP(char *commandp, int size)
-{
-#ifdef CONFIG_WILDFIRE
-	mach_halt = wildfire_halt;
-#endif
-#ifdef CONFIG_WILDFIREMOD
-	mach_halt = wildfiremod_halt;
-#endif
-	mach_sched_init = hw_timer_init;
-	m528x_uarts_init();
-	m528x_fec_init();
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m528x_qspi_init();
-#endif
-}
-
-/***************************************************************************/