m68knommu: Coldfire QSPI platform support

Since Grant has added the coldfire-qspi driver to next-spi, here is the
platform support for the parts that have qspi hardware.  This sets up
gpio to do the spi chip select using the default chip select pins; it should
be trivial for boards that require different or additional spi chip selects to
use other gpios as needed.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 137 insertions, 0 deletions

diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index 6e608d1836f..76b743343bf 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -17,10 +17,13 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -76,10 +79,141 @@ static struct platform_device m528x_fec = {
 	.resource		= m528x_fec_resources,
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m528x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    147
+#define MCFQSPI_CS1    148
+#define MCFQSPI_CS2    149
+#define MCFQSPI_CS3    150
+
+static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
+}
+
+static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
+}
+
+static struct mcfqspi_cs_control m528x_cs_control = {
+	.setup                  = m528x_cs_setup,
+	.teardown               = m528x_cs_teardown,
+	.select                 = m528x_cs_select,
+	.deselect               = m528x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m528x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m528x_cs_control,
+};
+
+static struct platform_device m528x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m528x_qspi_resources),
+	.resource		= m528x_qspi_resources,
+	.dev.platform_data	= &m528x_qspi_data,
+};
+
+static void __init m528x_qspi_init(void)
+{
+	/* setup Port QS for QSPI with gpio CS control */
+	__raw_writeb(0x07, MCFGPIO_PQSPAR);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
 static struct platform_device *m528x_devices[] __initdata = {
 	&m528x_uart,
 	&m528x_fec,
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m528x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -174,6 +308,9 @@ static int __init init_BSP(void)
 	mach_reset = m528x_cpu_reset;
 	m528x_uarts_init();
 	m528x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m528x_qspi_init();
+#endif
 	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
 	return 0;
 }