metag: Headers for core arch constants

Add a couple of header files containing core architecture constants.

The first (<asm/metag_isa.h>) contains some constants relating to the
instruction set, such as values to give to the CACHEW and CACHER
instructions.

The second (<asm/metag_regs.h>) contains constants for the core register
units directly accessible to various instructions, and for the
registers, fields, and bits in those units. The main units described are
the control unit (CT.*), the trigger unit (TR.*), and the run-time trace
unit (TT.*).

Signed-off-by: James Hogan <james.hogan@imgtec.com>

2 files changed, 1261 insertions, 0 deletions

diff --git a/arch/metag/include/asm/metag_isa.h b/arch/metag/include/asm/metag_isa.h
new file mode 100644
index 00000000000..c8aa2ae3899
--- /dev/null
+++ b/arch/metag/include/asm/metag_isa.h
@@ -0,0 +1,81 @@
+/*
+ * asm/metag_isa.h
+ *
+ * Copyright (C) 2000-2007, 2012 Imagination Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * Various defines for Meta instruction set.
+ */
+
+#ifndef _ASM_METAG_ISA_H_
+#define _ASM_METAG_ISA_H_
+
+
+/* L1 cache layout */
+
+/* Data cache line size as bytes and shift */
+#define DCACHE_LINE_BYTES 64
+#define DCACHE_LINE_S     6
+
+/* Number of ways in the data cache */
+#define DCACHE_WAYS       4
+
+/* Instruction cache line size as bytes and shift */
+#define ICACHE_LINE_BYTES 64
+#define ICACHE_LINE_S     6
+
+/* Number of ways in the instruction cache */
+#define ICACHE_WAYS       4
+
+
+/*
+ * CACHEWD/CACHEWL instructions use the bottom 8 bits of the data presented to
+ * control the operation actually achieved.
+ */
+/* Use of these two bits should be discouraged since the bits dont have
+ * consistent meanings
+ */
+#define CACHEW_ICACHE_BIT           0x01
+#define CACHEW_TLBFLUSH_BIT         0x02
+
+#define CACHEW_FLUSH_L1D_L2         0x0
+#define CACHEW_INVALIDATE_L1I       0x1
+#define CACHEW_INVALIDATE_L1DTLB    0x2
+#define CACHEW_INVALIDATE_L1ITLB    0x3
+#define CACHEW_WRITEBACK_L1D_L2     0x4
+#define CACHEW_INVALIDATE_L1D       0x8
+#define CACHEW_INVALIDATE_L1D_L2    0xC
+
+/*
+ * CACHERD/CACHERL instructions use bits 3:5 of the address presented to
+ * control the operation achieved and hence the specific result.
+ */
+#define CACHER_ADDR_BITS            0xFFFFFFC0
+#define CACHER_OPER_BITS            0x00000030
+#define CACHER_OPER_S               4
+#define     CACHER_OPER_LINPHY          0
+#define CACHER_ICACHE_BIT           0x00000008
+#define CACHER_ICACHE_S             3
+
+/*
+ * CACHERD/CACHERL LINPHY Oper result is one/two 32-bit words
+ *
+ *  If CRLINPHY0_VAL_BIT (Bit 0) set then,
+ *      Lower 32-bits corresponds to MMCU_ENTRY_* above.
+ *      Upper 32-bits corresponds to CRLINPHY1_* values below (if requested).
+ *  else
+ *      Lower 32-bits corresponds to CRLINPHY0_* values below.
+ *      Upper 32-bits undefined.
+ */
+#define CRLINPHY0_VAL_BIT      0x00000001
+#define CRLINPHY0_FIRST_BIT    0x00000004 /* Set if VAL=0 due to first level */
+
+#define CRLINPHY1_READ_BIT     0x00000001 /* Set if reads permitted          */
+#define CRLINPHY1_SINGLE_BIT   0x00000004 /* Set if TLB does not cache entry */
+#define CRLINPHY1_PAGEMSK_BITS 0x0000FFF0 /* Set to ((2^n-1)>>12) value      */
+#define CRLINPHY1_PAGEMSK_S    4
+
+#endif /* _ASM_METAG_ISA_H_ */
diff --git a/arch/metag/include/asm/metag_regs.h b/arch/metag/include/asm/metag_regs.h
new file mode 100644
index 00000000000..022fcad768f
--- /dev/null
+++ b/arch/metag/include/asm/metag_regs.h
@@ -0,0 +1,1180 @@
+/*
+ * asm/metag_regs.h
+ *
+ * Copyright (C) 2000-2007, 2012 Imagination Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * Various defines for Meta core (non memory-mapped) registers.
+ */
+
+#ifndef _ASM_METAG_REGS_H_
+#define _ASM_METAG_REGS_H_
+
+/*
+ * CHIP Unit Identifiers and Valid/Global register number masks
+ * ------------------------------------------------------------
+ */
+#define TXUCT_ID    0x0     /* Control unit regs */
+#ifdef METAC_1_2
+#define     TXUCT_MASK  0xFF0FFFFF  /* Valid regs 0..31  */
+#else
+#define     TXUCT_MASK  0xFF1FFFFF  /* Valid regs 0..31  */
+#endif
+#define     TGUCT_MASK  0x00000000  /* No global regs    */
+#define TXUD0_ID    0x1     /* Data unit regs */
+#define TXUD1_ID    0x2
+#define     TXUDX_MASK  0xFFFFFFFF  /* Valid regs 0..31 */
+#define     TGUDX_MASK  0xFFFF0000  /* Global regs for base inst */
+#define     TXUDXDSP_MASK   0x0F0FFFFF  /* Valid DSP regs */
+#define     TGUDXDSP_MASK   0x0E0E0000  /* Global DSP ACC regs */
+#define TXUA0_ID    0x3     /* Address unit regs */
+#define TXUA1_ID    0x4
+#define     TXUAX_MASK  0x0000FFFF  /* Valid regs   0-15 */
+#define     TGUAX_MASK  0x0000FF00  /* Global regs  8-15 */
+#define TXUPC_ID    0x5     /* PC registers */
+#define     TXUPC_MASK  0x00000003  /* Valid regs   0- 1 */
+#define     TGUPC_MASK  0x00000000  /* No global regs    */
+#define TXUPORT_ID  0x6     /* Ports are not registers */
+#define TXUTR_ID    0x7
+#define     TXUTR_MASK  0x0000005F  /* Valid regs   0-3,4,6 */
+#define     TGUTR_MASK  0x00000000  /* No global regs    */
+#ifdef METAC_2_1
+#define TXUTT_ID    0x8
+#define     TXUTT_MASK  0x0000000F  /* Valid regs   0-3 */
+#define     TGUTT_MASK  0x00000010  /* Global reg   4   */
+#define TXUFP_ID    0x9     /* FPU regs */
+#define     TXUFP_MASK  0x0000FFFF  /* Valid regs   0-15 */
+#define     TGUFP_MASK  0x00000000  /* No global regs    */
+#endif /* METAC_2_1 */
+
+#ifdef METAC_1_2
+#define TXUXX_MASKS { TXUCT_MASK, TXUDX_MASK, TXUDX_MASK, TXUAX_MASK, \
+		      TXUAX_MASK, TXUPC_MASK,          0, TXUTR_MASK, \
+		      0, 0, 0, 0, 0, 0, 0, 0                          }
+#define TGUXX_MASKS { TGUCT_MASK, TGUDX_MASK, TGUDX_MASK, TGUAX_MASK, \
+		      TGUAX_MASK, TGUPC_MASK,          0, TGUTR_MASK, \
+		      0, 0, 0, 0, 0, 0, 0, 0                          }
+#else /* METAC_1_2 */
+#define TXUXX_MASKS { TXUCT_MASK, TXUDX_MASK, TXUDX_MASK, TXUAX_MASK, \
+		      TXUAX_MASK, TXUPC_MASK,          0, TXUTR_MASK, \
+		      TXUTT_MASK, TXUFP_MASK,          0,          0, \
+			       0,          0,          0,          0  }
+#define TGUXX_MASKS { TGUCT_MASK, TGUDX_MASK, TGUDX_MASK, TGUAX_MASK, \
+		      TGUAX_MASK, TGUPC_MASK,          0, TGUTR_MASK, \
+		      TGUTT_MASK, TGUFP_MASK,          0,          0, \
+			       0,          0,          0,          0  }
+#endif /* !METAC_1_2 */
+
+#define TXUXXDSP_MASKS { 0, TXUDXDSP_MASK, TXUDXDSP_MASK, 0, 0, 0, 0, 0, \
+			 0, 0, 0, 0, 0, 0, 0, 0                          }
+#define TGUXXDSP_MASKS { 0, TGUDXDSP_MASK, TGUDXDSP_MASK, 0, 0, 0, 0, 0, \
+			 0, 0, 0, 0, 0, 0, 0, 0                          }
+
+/* -------------------------------------------------------------------------
+;                          DATA AND ADDRESS UNIT REGISTERS
+;  -----------------------------------------------------------------------*/
+/*
+  Thread local D0 registers
+ */
+/*   D0.0    ; Holds 32-bit result, can be used as scratch */
+#define D0Re0 D0.0
+/*   D0.1    ; Used to pass Arg6_32 */
+#define D0Ar6 D0.1
+/*   D0.2    ; Used to pass Arg4_32 */
+#define D0Ar4 D0.2
+/*   D0.3    ; Used to pass Arg2_32 to a called routine (see D1.3 below) */
+#define D0Ar2 D0.3
+/*   D0.4    ; Can be used as scratch; used to save A0FrP in entry sequences */
+#define D0FrT D0.4
+/*   D0.5    ; C compiler assumes preservation, save with D1.5 if used */
+/*   D0.6    ; C compiler assumes preservation, save with D1.6 if used */
+/*   D0.7    ; C compiler assumes preservation, save with D1.7 if used */
+/*   D0.8    ; Use of D0.8 and above is not encouraged */
+/*   D0.9  */
+/*   D0.10 */
+/*   D0.11 */
+/*   D0.12 */
+/*   D0.13 */
+/*   D0.14 */
+/*   D0.15 */
+/*
+   Thread local D1 registers
+ */
+/*   D1.0    ; Holds top 32-bits of 64-bit result, can be used as scratch */
+#define D1Re0 D1.0
+/*   D1.1    ; Used to pass Arg5_32 */
+#define D1Ar5 D1.1
+/*   D1.2    ; Used to pass Arg3_32 */
+#define D1Ar3 D1.2
+/*   D1.3    ; Used to pass Arg1_32 (first 32-bit argument) to a called routine */
+#define D1Ar1 D1.3
+/*   D1.4    ; Used for Return Pointer, save during entry with A0FrP (via D0.4) */
+#define D1RtP D1.4
+/*   D1.5    ; C compiler assumes preservation, save if used */
+/*   D1.6    ; C compiler assumes preservation, save if used */
+/*   D1.7    ; C compiler assumes preservation, save if used */
+/*   D1.8    ; Use of D1.8 and above is not encouraged */
+/*   D1.9  */
+/*   D1.10 */
+/*   D1.11 */
+/*   D1.12 */
+/*   D1.13 */
+/*   D1.14 */
+/*   D1.15 */
+/*
+   Thread local A0 registers
+ */
+/*   A0.0    ; Primary stack pointer */
+#define A0StP A0.0
+/*   A0.1    ; Used as local frame pointer in C, save if used (via D0.4) */
+#define A0FrP A0.1
+/*   A0.2  */
+/*   A0.3  */
+/*   A0.4    ; Use of A0.4 and above is not encouraged */
+/*   A0.5  */
+/*   A0.6  */
+/*   A0.7  */
+/*
+   Thread local A1 registers
+ */
+/*   A1.0    ; Global static chain pointer - do not modify */
+#define A1GbP A1.0
+/*   A1.1    ; Local static chain pointer in C, can be used as scratch */
+#define A1LbP A1.1
+/*   A1.2  */
+/*   A1.3  */
+/*   A1.4    ; Use of A1.4 and above is not encouraged */
+/*   A1.5  */
+/*   A1.6  */
+/*   A1.7  */
+#ifdef METAC_2_1
+/* Renameable registers for use with Fast Interrupts */
+/* The interrupt stack pointer (usually a global register) */
+#define A0IStP A0IReg
+/* The interrupt global pointer (usually a global register) */
+#define A1IGbP A1IReg
+#endif
+/*
+   Further registers may be globally allocated via linkage/loading tools,
+   normally they are not used.
+ */
+/*-------------------------------------------------------------------------
+;                    STACK STRUCTURE and CALLING CONVENTION
+; -----------------------------------------------------------------------*/
+/*
+; Calling convention indicates that the following is the state of the
+; stack frame at the start of a routine-
+;
+;       Arg9_32 [A0StP+#-12]
+;       Arg8_32 [A0StP+#- 8]
+;       Arg7_32 [A0StP+#- 4]
+;   A0StP->
+;
+; Registers D1.3, D0.3, ..., to D0.1 are used to pass Arg1_32 to Arg6_32
+;   respectively. If a routine needs to store them on the stack in order
+;   to make sub-calls or because of the general complexity of the routine it
+;   is best to dump these registers immediately at the start of a routine
+;   using a MSETL or SETL instruction-
+;
+;   MSETL   [A0StP],D0Ar6,D0Ar4,D0Ar2; Only dump argments expected
+;or SETL    [A0StP+#8++],D0Ar2       ; Up to two 32-bit args expected
+;
+; For non-leaf routines it is always necessary to save and restore at least
+; the return address value D1RtP on the stack. Also by convention if the
+; frame is saved then a new A0FrP value must be set-up. So for non-leaf
+; routines at this point both these registers must be saved onto the stack
+; using a SETL instruction and the new A0FrP value is then set-up-
+;
+;   MOV     D0FrT,A0FrP
+;   ADD     A0FrP,A0StP,#0
+;   SETL    [A0StP+#8++],D0FrT,D1RtP
+;
+; Registers D0.5, D1.5, to D1.7 are assumed to be preserved across calls so
+;   a SETL or MSETL instruction can be used to save the current state
+;   of these registers if they are modified by the current routine-
+;
+;   MSETL   [A0StP],D0.5,D0.6,D0.7   ; Only save registers modified
+;or SETL    [A0StP+#8++],D0.5        ; Only D0.5 and/or D1.5 modified
+;
+; All of the above sequences can be combined into one maximal case-
+;
+;   MOV     D0FrT,A0FrP              ; Save and calculate new frame pointer
+;   ADD     A0FrP,A0StP,#(ARS)
+;   MSETL   [A0StP],D0Ar6,D0Ar4,D0Ar2,D0FrT,D0.5,D0.6,D0.7
+;
+; Having completed the above sequence the only remaining task on routine
+; entry is to reserve any local and outgoing argment storage space on the
+; stack. This instruction may be omitted if the size of this region is zero-
+;
+;   ADD     A0StP,A0StP,#(LCS)
+;
+; LCS is the first example use of one of a number of standard local defined
+; values that can be created to make assembler code more readable and
+; potentially more robust-
+;
+; #define ARS   0x18                 ; Register arg bytes saved on stack
+; #define FRS   0x20                 ; Frame save area size in bytes
+; #define LCS   0x00                 ; Locals and Outgoing arg size
+; #define ARO   (LCS+FRS)            ; Stack offset to access args
+;
+; All of the above defines should be undefined (#undef) at the end of each
+; routine to avoid accidental use in the next routine.
+;
+; Given all of the above the following stack structure is expected during
+; the body of a routine if all args passed in registers are saved during
+; entry-
+;
+;                                    ; 'Incoming args area'
+;         Arg10_32 [A0StP+#-((10*4)+ARO)]       Arg9_32  [A0StP+#-(( 9*4)+ARO)]
+;         Arg8_32  [A0StP+#-(( 8*4)+ARO)]       Arg7_32  [A0StP+#-(( 7*4)+ARO)]
+;--- Call point
+; D0Ar6=  Arg6_32  [A0StP+#-(( 6*4)+ARO)] D1Ar5=Arg5_32  [A0StP+#-(( 5*4)+ARO)]
+; D0Ar4=  Arg4_32  [A0StP+#-(( 4*4)+ARO)] D1Ar3=Arg3_32  [A0StP+#-(( 3*4)+ARO)]
+; D0Ar2=  Arg2_32  [A0StP+#-(( 2*4)+ARO)] D1Ar2=Arg1_32  [A0StP+#-(( 1*4)+ARO)]
+;                                    ; 'Frame area'
+; A0FrP-> D0FrT, D1RtP,
+;         D0.5, D1.5,
+;         D0.6, D1.6,
+;         D0.7, D1.7,
+;                                    ; 'Locals area'
+;         Loc0_32  [A0StP+# (( 0*4)-LCS)],      Loc1_32 [A0StP+# (( 1*4)-LCS)]
+;               .... other locals
+;         Locn_32  [A0StP+# (( n*4)-LCS)]
+;                                    ; 'Outgoing args area'
+;         Outm_32  [A0StP+#- ( m*4)]            .... other outgoing args
+;         Out8_32  [A0StP+#- ( 1*4)]            Out7_32  [A0StP+#- ( 1*4)]
+; A0StP-> (Out1_32-Out6_32 in regs D1Ar1-D0Ar6)
+;
+; The exit sequence for a non-leaf routine can use the frame pointer created
+; in the entry sequence to optimise the recovery of the full state-
+;
+;   MGETL   D0FrT,D0.5,D0.6,D0.7,[A0FrP]
+;   SUB     A0StP,A0FrP,#(ARS+FRS)
+;   MOV     A0FrP,D0FrT
+;   MOV     PC,D1RtP
+;
+; Having described the most complex non-leaf case above, it is worth noting
+; that if a routine is a leaf and does not use any of the caller-preserved
+; state. The routine can be implemented as-
+;
+;   ADD     A0StP,A0StP,#LCS
+;   .... body of routine
+;   SUB     A0StP,A0StP,#LCS
+;   MOV     PC,D1RtP
+;
+; The stack adjustments can also be omitted if no local storage is required.
+;
+; Another exit sequence structure is more applicable if for a leaf routine
+; with no local frame pointer saved/generated in which the call saved
+; registers need to be saved and restored-
+;
+;   MSETL   [A0StP],D0.5,D0.6,D0.7   ; Hence FRS is 0x18, ARS is 0x00
+;   ADD     A0StP,A0StP,#LCS
+;   .... body of routine
+;   GETL    D0.5,D1.5,[A0StP+#((0*8)-(FRS+LCS))]
+;   GETL    D0.6,D1.6,[A0StP+#((1*8)-(FRS+LCS))]
+;   GETL    D0.7,D1.7,[A0StP+#((2*8)-(FRS+LCS))]
+;   SUB     A0StP,A0StP,#(ARS+FRS+LCS)
+;   MOV     PC,D1RtP
+;
+; Lastly, to support profiling assembler code should use a fixed entry/exit
+; sequence if the trigger define _GMON_ASM is defined-
+;
+;   #ifndef _GMON_ASM
+;   ... optimised entry code
+;   #else
+;   ; Profiling entry case
+;   MOV     D0FrT,A0FrP              ; Save and calculate new frame pointer
+;   ADD     A0FrP,A0StP,#(ARS)
+;   MSETL   [A0StP],...,D0FrT,... or SETL    [A0FrP],D0FrT,D1RtP
+;   CALLR   D0FrT,_mcount_wrapper
+;   #endif
+;   ... body of routine
+;   #ifndef _GMON_ASM
+;   ... optimised exit code
+;   #else
+;   ; Profiling exit case
+;   MGETL   D0FrT,...,[A0FrP]     or GETL    D0FrT,D1RtP,[A0FrP++]
+;   SUB     A0StP,A0FrP,#(ARS+FRS)
+;   MOV     A0FrP,D0FrT
+;   MOV     PC,D1RtP
+;   #endif
+
+
+; -------------------------------------------------------------------------
+;                         CONTROL UNIT REGISTERS
+; -------------------------------------------------------------------------
+;
+; See the assembler guide, hardware documentation, or the field values
+; defined below for some details of the use of these registers.
+*/
+#define TXENABLE    CT.0    /* Need to define bit-field values in these */
+#define TXMODE      CT.1
+#define TXSTATUS    CT.2    /* DEFAULT 0x00020000 */
+#define TXRPT       CT.3
+#define TXTIMER     CT.4
+#define TXL1START   CT.5
+#define TXL1END     CT.6
+#define TXL1COUNT   CT.7
+#define TXL2START   CT.8
+#define TXL2END     CT.9
+#define TXL2COUNT   CT.10
+#define TXBPOBITS   CT.11
+#define TXMRSIZE    CT.12
+#define TXTIMERI    CT.13
+#define TXDRCTRL    CT.14  /* DEFAULT 0x0XXXF0F0 */
+#define TXDRSIZE    CT.15
+#define TXCATCH0    CT.16
+#define TXCATCH1    CT.17
+#define TXCATCH2    CT.18
+#define TXCATCH3    CT.19
+
+#ifdef METAC_2_1
+#define TXDEFR      CT.20
+#define TXCPRS      CT.21
+#endif
+
+#define TXINTERN0   CT.23
+#define TXAMAREG0   CT.24
+#define TXAMAREG1   CT.25
+#define TXAMAREG2   CT.26
+#define TXAMAREG3   CT.27
+#define TXDIVTIME   CT.28   /* DEFAULT 0x00000001 */
+#define TXPRIVEXT   CT.29   /* DEFAULT 0x003B0000 */
+#define TXTACTCYC   CT.30
+#define TXIDLECYC   CT.31
+
+/*****************************************************************************
+ *                        CONTROL UNIT REGISTER BITS
+ ****************************************************************************/
+/*
+ * The following registers and where appropriate the sub-fields of those
+ * registers are defined for pervasive use in controlling program flow.
+ */
+
+/*
+ * TXENABLE register fields - only the thread id is routinely useful
+ */
+#define TXENABLE_REGNUM 0
+#define TXENABLE_THREAD_BITS       0x00000700
+#define TXENABLE_THREAD_S          8
+#define TXENABLE_REV_STEP_BITS     0x000000F0
+#define TXENABLE_REV_STEP_S        4
+
+/*
+ * TXMODE register - controls extensions of the instruction set
+ */
+#define TXMODE_REGNUM 1
+#define     TXMODE_DEFAULT  0   /* All fields default to zero */
+
+/*
+ * TXSTATUS register - contains a couple of stable bits that can be used
+ *      to determine the privilege processing level and interrupt
+ *      processing level of the current thread.
+ */
+#define TXSTATUS_REGNUM 2
+#define TXSTATUS_PSTAT_BIT         0x00020000   /* -> Privilege active      */
+#define TXSTATUS_PSTAT_S           17
+#define TXSTATUS_ISTAT_BIT         0x00010000   /* -> In interrupt state    */
+#define TXSTATUS_ISTAT_S           16
+
+/*
+ * These are all relatively boring registers, mostly full 32-bit
+ */
+#define TXRPT_REGNUM     3  /* Repeat counter for XFR... instructions   */
+#define TXTIMER_REGNUM   4  /* Timer-- causes timer trigger on overflow */
+#define TXL1START_REGNUM 5  /* Hardware Loop 1 Start-PC/End-PC/Count    */
+#define TXL1END_REGNUM   6
+#define TXL1COUNT_REGNUM 7
+#define TXL2START_REGNUM 8  /* Hardware Loop 2 Start-PC/End-PC/Count    */
+#define TXL2END_REGNUM   9
+#define TXL2COUNT_REGNUM 10
+#define TXBPOBITS_REGNUM 11 /* Branch predict override bits - tune perf */
+#define TXTIMERI_REGNUM  13 /* Timer-- time based interrupt trigger     */
+
+/*
+ * TXDIVTIME register is routinely read to calculate the time-base for
+ * the TXTIMER register.
+ */
+#define TXDIVTIME_REGNUM 28
+#define     TXDIVTIME_DIV_BITS 0x000000FF
+#define     TXDIVTIME_DIV_S    0
+#define     TXDIVTIME_DIV_MIN  0x00000001   /* Maximum resolution       */
+#define     TXDIVTIME_DIV_MAX  0x00000100   /* 1/1 -> 1/256 resolution  */
+#define     TXDIVTIME_BASE_HZ  1000000      /* Timers run at 1Mhz @1/1  */
+
+/*
+ * TXPRIVEXT register can be consulted to decide if write access to a
+ *    part of the threads register set is not permitted when in
+ *    unprivileged mode (PSTAT == 0).
+ */
+#define TXPRIVEXT_REGNUM 29
+#define     TXPRIVEXT_COPRO_BITS    0xFF000000 /* Co-processor 0-7 */
+#define     TXPRIVEXT_COPRO_S       24
+#define     TXPRIVEXT_TXTRIGGER_BIT 0x00020000 /* TXSTAT|TXMASK|TXPOLL */
+#define     TXPRIVEXT_TXGBLCREG_BIT 0x00010000 /* Global common regs */
+#define     TXPRIVEXT_CBPRIV_BIT    0x00008000 /* Mem i/f dump priv */
+#define     TXPRIVEXT_ILOCK_BIT     0x00004000 /* LOCK inst priv */
+#define     TXPRIVEXT_TXITACCYC_BIT 0x00002000 /* TXIDLECYC|TXTACTCYC */
+#define     TXPRIVEXT_TXDIVTIME_BIT 0x00001000 /* TXDIVTIME priv */
+#define     TXPRIVEXT_TXAMAREGX_BIT 0x00000800 /* TXAMAREGX priv */
+#define     TXPRIVEXT_TXTIMERI_BIT  0x00000400 /* TXTIMERI  priv */
+#define     TXPRIVEXT_TXSTATUS_BIT  0x00000200 /* TXSTATUS  priv */
+#define     TXPRIVEXT_TXDISABLE_BIT 0x00000100 /* TXENABLE  priv */
+#ifndef METAC_1_2
+#define     TXPRIVEXT_MINIMON_BIT   0x00000080 /* Enable Minim features */
+#define     TXPRIVEXT_OLDBCCON_BIT  0x00000020 /* Restore Static predictions */
+#define     TXPRIVEXT_ALIGNREW_BIT  0x00000010 /* Align & precise checks */
+#endif
+#define     TXPRIVEXT_KEEPPRI_BIT   0x00000008 /* Use AMA_Priority if ISTAT=1*/
+#define     TXPRIVEXT_TXTOGGLEI_BIT 0x00000001 /* TX.....I  priv */
+
+/*
+ * TXTACTCYC register - counts instructions issued for this thread
+ */
+#define TXTACTCYC_REGNUM  30
+#define     TXTACTCYC_COUNT_MASK    0x00FFFFFF
+
+/*
+ * TXIDLECYC register - counts idle cycles
+ */
+#define TXIDLECYC_REGNUM  31
+#define     TXIDLECYC_COUNT_MASK    0x00FFFFFF
+
+/*****************************************************************************
+ *                             DSP EXTENSIONS
+ ****************************************************************************/
+/*
+ * The following values relate to fields and controls that only a program
+ * using the DSP extensions of the META instruction set need to know.
+ */
+
+
+#ifndef METAC_1_2
+/*
+ * Allow co-processor hardware to replace the read pipeline data source in
+ * appropriate cases.
+ */
+#define TXMODE_RDCPEN_BIT       0x00800000
+#endif
+
+/*
+ * Address unit addressing modes
+ */
+#define TXMODE_A1ADDR_BITS  0x00007000
+#define TXMODE_A1ADDR_S     12
+#define TXMODE_A0ADDR_BITS  0x00000700
+#define TXMODE_A0ADDR_S     8
+#define     TXMODE_AXADDR_MODULO 3
+#define     TXMODE_AXADDR_REVB   4
+#define     TXMODE_AXADDR_REVW   5
+#define     TXMODE_AXADDR_REVD   6
+#define     TXMODE_AXADDR_REVL   7
+
+/*
+ * Data unit OverScale select (default 0 -> normal, 1 -> top 16 bits)
+ */
+#define TXMODE_DXOVERSCALE_BIT  0x00000080
+
+/*
+ * Data unit MX mode select (default 0 -> MX16, 1 -> MX8)
+ */
+#define TXMODE_M8_BIT         0x00000040
+
+/*
+ * Data unit accumulator saturation point (default -> 40 bit accumulator)
+ */
+#define TXMODE_DXACCSAT_BIT 0x00000020 /* Set for 32-bit accumulator */
+
+/*
+ * Data unit accumulator saturation enable (default 0 -> no saturation)
+ */
+#define TXMODE_DXSAT_BIT    0x00000010
+
+/*
+ * Data unit master rounding control (default 0 -> normal, 1 -> convergent)
+ */
+#define TXMODE_DXROUNDING_BIT   0x00000008
+
+/*
+ * Data unit product shift for fractional arithmetic (default off)
+ */
+#define TXMODE_DXPRODSHIFT_BIT  0x00000004
+
+/*
+ * Select the arithmetic mode (multiply mostly) for both data units
+ */
+#define TXMODE_DXARITH_BITS 0x00000003
+#define     TXMODE_DXARITH_32  3
+#define     TXMODE_DXARITH_32H 2
+#define     TXMODE_DXARITH_S16 1
+#define     TXMODE_DXARITH_16  0
+
+/*
+ * TXMRSIZE register value only relevant when DSP modulo addressing active
+ */
+#define TXMRSIZE_REGNUM 12
+#define     TXMRSIZE_MIN    0x0002  /* 0, 1 -> normal addressing logic */
+#define     TXMRSIZE_MAX    0xFFFF
+
+/*
+ * TXDRCTRL register can be used to detect the actaul size of the DSP RAM
+ * partitions allocated to this thread.
+ */
+#define TXDRCTRL_REGNUM 14
+#define     TXDRCTRL_SINESIZE_BITS  0x0F000000
+#define     TXDRCTRL_SINESIZE_S     24
+#define     TXDRCTRL_RAMSZPOW_BITS  0x001F0000  /* Limit = (1<<RAMSZPOW)-1 */
+#define     TXDRCTRL_RAMSZPOW_S     16
+#define     TXDRCTRL_D1RSZAND_BITS  0x0000F000  /* Mask top 4 bits - D1 */
+#define     TXDRCTRL_D1RSZAND_S     12
+#define     TXDRCTRL_D0RSZAND_BITS  0x000000F0  /* Mask top 4 bits - D0 */
+#define     TXDRCTRL_D0RSZAND_S     4
+/* Given extracted RAMSZPOW and DnRSZAND fields this returns the size */
+#define     TXDRCTRL_DXSIZE(Pow, AndBits) \
+				((((~(AndBits)) & 0x0f) + 1) << ((Pow)-4))
+
+/*
+ * TXDRSIZE register provides modulo addressing options for each DSP RAM
+ */
+#define TXDRSIZE_REGNUM 15
+#define     TXDRSIZE_R1MOD_BITS       0xFFFF0000
+#define     TXDRSIZE_R1MOD_S          16
+#define     TXDRSIZE_R0MOD_BITS       0x0000FFFF
+#define     TXDRSIZE_R0MOD_S          0
+
+#define     TXDRSIZE_RBRAD_SCALE_BITS 0x70000000
+#define     TXDRSIZE_RBRAD_SCALE_S    28
+#define     TXDRSIZE_RBMODSIZE_BITS   0x0FFF0000
+#define     TXDRSIZE_RBMODSIZE_S      16
+#define     TXDRSIZE_RARAD_SCALE_BITS 0x00007000
+#define     TXDRSIZE_RARAD_SCALE_S    12
+#define     TXDRSIZE_RAMODSIZE_BITS   0x00000FFF
+#define     TXDRSIZE_RAMODSIZE_S      0
+
+/*****************************************************************************
+ *                       DEFERRED and BUS ERROR EXTENSION
+ ****************************************************************************/
+
+/*
+ * TXDEFR register - Deferred exception control
+ */
+#define TXDEFR_REGNUM 20
+#define     TXDEFR_DEFAULT  0   /* All fields default to zero */
+
+/*
+ * Bus error state is a multi-bit positive/negative event notification from
+ * the bus infrastructure.
+ */
+#define     TXDEFR_BUS_ERR_BIT    0x80000000  /* Set if error (LSB STATE) */
+#define     TXDEFR_BUS_ERRI_BIT   0x40000000  /* Fetch returned error */
+#define     TXDEFR_BUS_STATE_BITS 0x3F000000  /* Bus event/state data */
+#define     TXDEFR_BUS_STATE_S    24
+#define     TXDEFR_BUS_TRIG_BIT   0x00800000  /* Set when bus error seen */
+
+/*
+ * Bus events are collected by background code in a deferred manner unless
+ * selected to trigger an extended interrupt HALT trigger when they occur.
+ */
+#define     TXDEFR_BUS_ICTRL_BIT  0x00000080  /* Enable interrupt trigger */
+
+/*
+ * CHIP Automatic Mips Allocation control registers
+ * ------------------------------------------------
+ */
+
+/* CT Bank AMA Registers */
+#define TXAMAREG0_REGNUM 24
+#ifdef METAC_1_2
+#define     TXAMAREG0_CTRL_BITS       0x07000000
+#else /* METAC_1_2 */
+#define     TXAMAREG0_RCOFF_BIT       0x08000000
+#define     TXAMAREG0_DLINEHLT_BIT    0x04000000
+#define     TXAMAREG0_DLINEDIS_BIT    0x02000000
+#define     TXAMAREG0_CYCSTRICT_BIT   0x01000000
+#define     TXAMAREG0_CTRL_BITS       (TXAMAREG0_RCOFF_BIT |    \
+				       TXAMAREG0_DLINEHLT_BIT | \
+				       TXAMAREG0_DLINEDIS_BIT | \
+				       TXAMAREG0_CYCSTRICT_BIT)
+#endif /* !METAC_1_2 */
+#define     TXAMAREG0_CTRL_S           24
+#define     TXAMAREG0_MDM_BIT         0x00400000
+#define     TXAMAREG0_MPF_BIT         0x00200000
+#define     TXAMAREG0_MPE_BIT         0x00100000
+#define     TXAMAREG0_MASK_BITS       (TXAMAREG0_MDM_BIT | \
+				       TXAMAREG0_MPF_BIT | \
+				       TXAMAREG0_MPE_BIT)
+#define     TXAMAREG0_MASK_S          20
+#define     TXAMAREG0_SDM_BIT         0x00040000
+#define     TXAMAREG0_SPF_BIT         0x00020000
+#define     TXAMAREG0_SPE_BIT         0x00010000
+#define     TXAMAREG0_STATUS_BITS     (TXAMAREG0_SDM_BIT | \
+				       TXAMAREG0_SPF_BIT | \
+				       TXAMAREG0_SPE_BIT)
+#define     TXAMAREG0_STATUS_S        16
+#define     TXAMAREG0_PRIORITY_BITS   0x0000FF00
+#define     TXAMAREG0_PRIORITY_S      8
+#define     TXAMAREG0_BVALUE_BITS     0x000000FF
+#define     TXAMAREG0_BVALUE_S  0
+
+#define TXAMAREG1_REGNUM 25
+#define     TXAMAREG1_DELAYC_BITS     0x07FFFFFF
+#define     TXAMAREG1_DELAYC_S  0
+
+#define TXAMAREG2_REGNUM 26
+#ifdef METAC_1_2
+#define     TXAMAREG2_DLINEC_BITS     0x00FFFFFF
+#define     TXAMAREG2_DLINEC_S        0
+#else /* METAC_1_2 */
+#define     TXAMAREG2_IRQPRIORITY_BIT 0xFF000000
+#define     TXAMAREG2_IRQPRIORITY_S   24
+#define     TXAMAREG2_DLINEC_BITS     0x00FFFFF0
+#define     TXAMAREG2_DLINEC_S        4
+#endif /* !METAC_1_2 */
+
+#define TXAMAREG3_REGNUM 27
+#define     TXAMAREG2_AMABLOCK_BIT    0x00080000
+#define     TXAMAREG2_AMAC_BITS       0x0000FFFF
+#define     TXAMAREG2_AMAC_S          0
+
+/*****************************************************************************
+ *                                FPU EXTENSIONS
+ ****************************************************************************/
+/*
+ * The following registers only exist in FPU enabled cores.
+ */
+
+/*
+ * TXMODE register - FPU rounding mode control/status fields
+ */
+#define     TXMODE_FPURMODE_BITS     0x00030000
+#define     TXMODE_FPURMODE_S        16
+#define     TXMODE_FPURMODEWRITE_BIT 0x00040000  /* Set to change FPURMODE */
+
+/*
+ * TXDEFR register - FPU exception handling/state is a significant source
+ *   of deferrable errors. Run-time S/W can move handling to interrupt level
+ *   using DEFR instruction to collect state.
+ */
+#define     TXDEFR_FPE_FE_BITS       0x003F0000  /* Set by FPU_FE events */
+#define     TXDEFR_FPE_FE_S          16
+
+#define     TXDEFR_FPE_INEXACT_FE_BIT   0x010000
+#define     TXDEFR_FPE_UNDERFLOW_FE_BIT 0x020000
+#define     TXDEFR_FPE_OVERFLOW_FE_BIT  0x040000
+#define     TXDEFR_FPE_DIVBYZERO_FE_BIT 0x080000
+#define     TXDEFR_FPE_INVALID_FE_BIT   0x100000
+#define     TXDEFR_FPE_DENORMAL_FE_BIT  0x200000
+
+#define     TXDEFR_FPE_ICTRL_BITS    0x000003F   /* Route to interrupts */
+#define     TXDEFR_FPE_ICTRL_S       0
+
+#define     TXDEFR_FPE_INEXACT_ICTRL_BIT   0x01
+#define     TXDEFR_FPE_UNDERFLOW_ICTRL_BIT 0x02
+#define     TXDEFR_FPE_OVERFLOW_ICTRL_BIT  0x04
+#define     TXDEFR_FPE_DIVBYZERO_ICTRL_BIT 0x08
+#define     TXDEFR_FPE_INVALID_ICTRL_BIT   0x10
+#define     TXDEFR_FPE_DENORMAL_ICTRL_BIT  0x20
+
+/*
+ * DETAILED FPU RELATED VALUES
+ * ---------------------------
+ */
+
+/*
+ * Rounding mode field in TXMODE can hold a number of logical values
+ */
+#define METAG_FPURMODE_TONEAREST  0x0      /* Default */
+#define METAG_FPURMODE_TOWARDZERO 0x1
+#define METAG_FPURMODE_UPWARD     0x2
+#define METAG_FPURMODE_DOWNWARD   0x3
+
+/*
+ * In order to set the TXMODE register field that controls the rounding mode
+ * an extra bit must be set in the value written versus that read in order
+ * to gate writes to the rounding mode field. This allows other non-FPU code
+ * to modify TXMODE without knowledge of the FPU units presence and not
+ * influence the FPU rounding mode. This macro adds the required bit so new
+ * rounding modes are accepted.
+ */
+#define TXMODE_FPURMODE_SET(FPURMode) \
+	(TXMODE_FPURMODEWRITE_BIT + ((FPURMode)<<TXMODE_FPURMODE_S))
+
+/*
+ * To successfully restore TXMODE to zero at the end of the function the
+ * following value (rather than zero) must be used.
+ */
+#define TXMODE_FPURMODE_RESET (TXMODE_FPURMODEWRITE_BIT)
+
+/*
+ * In TXSTATUS a special bit exists to indicate if FPU H/W has been accessed
+ * since it was last reset.
+ */
+#define TXSTATUS_FPACTIVE_BIT  0x01000000
+
+/*
+ * Exception state (see TXDEFR_FPU_FE_*) and enabling (for interrupt
+ * level processing (see TXDEFR_FPU_ICTRL_*) are controlled by similar
+ * bit mask locations within each field.
+ */
+#define METAG_FPU_FE_INEXACT   0x01
+#define METAG_FPU_FE_UNDERFLOW 0x02
+#define METAG_FPU_FE_OVERFLOW  0x04
+#define METAG_FPU_FE_DIVBYZERO 0x08
+#define METAG_FPU_FE_INVALID   0x10
+#define METAG_FPU_FE_DENORMAL  0x20
+#define METAG_FPU_FE_ALL_EXCEPT (METAG_FPU_FE_INEXACT   | \
+				 METAG_FPU_FE_UNDERFLOW | \
+				 METAG_FPU_FE_OVERFLOW  | \
+				 METAG_FPU_FE_DIVBYZERO | \
+				 METAG_FPU_FE_INVALID   | \
+				 METAG_FPU_FE_DENORMAL)
+
+/*****************************************************************************
+ *             THREAD CONTROL, ERROR, OR INTERRUPT STATE EXTENSIONS
+ ****************************************************************************/
+/*
+ * The following values are only relevant to code that externally controls
+ * threads, handles errors/interrupts, and/or set-up interrupt/error handlers
+ * for subsequent use.
+ */
+
+/*
+ * TXENABLE register fields - only ENABLE_BIT is potentially read/write
+ */
+#define TXENABLE_MAJOR_REV_BITS    0xFF000000
+#define TXENABLE_MAJOR_REV_S       24
+#define TXENABLE_MINOR_REV_BITS    0x00FF0000
+#define TXENABLE_MINOR_REV_S       16
+#define TXENABLE_CLASS_BITS        0x0000F000
+#define TXENABLE_CLASS_S           12
+#define TXENABLE_CLASS_DSP             0x0 /* -> DSP Thread */
+#define TXENABLE_CLASS_LDSP            0x8 /* -> DSP LITE Thread */
+#define TXENABLE_CLASS_GP              0xC /* -> General Purpose Thread */
+#define     TXENABLE_CLASSALT_LFPU       0x2 /*  Set to indicate LITE FPU */
+#define     TXENABLE_CLASSALT_FPUR8      0x1 /*  Set to indicate 8xFPU regs */
+#define TXENABLE_MTXARCH_BIT       0x00000800
+#define TXENABLE_STEP_REV_BITS     0x000000F0
+#define TXENABLE_STEP_REV_S        4
+#define TXENABLE_STOPPED_BIT       0x00000004   /* TXOFF due to ENABLE->0 */
+#define TXENABLE_OFF_BIT           0x00000002   /* Thread is in off state */
+#define TXENABLE_ENABLE_BIT        0x00000001   /* Set if running */
+
+/*
+ * TXSTATUS register - used by external/internal interrupt/error handler
+ */
+#define TXSTATUS_CB1MARKER_BIT     0x00800000   /* -> int level mem state */
+#define TXSTATUS_CBMARKER_BIT      0x00400000   /* -> mem i/f state dumped */
+#define TXSTATUS_MEM_FAULT_BITS    0x00300000
+#define TXSTATUS_MEM_FAULT_S       20
+#define     TXSTATUS_MEMFAULT_NONE  0x0 /* -> No memory fault       */
+#define     TXSTATUS_MEMFAULT_GEN   0x1 /* -> General fault         */
+#define     TXSTATUS_MEMFAULT_PF    0x2 /* -> Page fault            */
+#define     TXSTATUS_MEMFAULT_RO    0x3 /* -> Read only fault       */
+#define TXSTATUS_MAJOR_HALT_BITS   0x000C0000
+#define TXSTATUS_MAJOR_HALT_S      18
+#define     TXSTATUS_MAJHALT_TRAP 0x0   /* -> SWITCH inst used      */
+#define     TXSTATUS_MAJHALT_INST 0x1   /* -> Unknown inst or fetch */
+#define     TXSTATUS_MAJHALT_PRIV 0x2   /* -> Internal privilege    */
+#define     TXSTATUS_MAJHALT_MEM  0x3   /* -> Memory i/f fault      */
+#define TXSTATUS_L_STEP_BITS       0x00000800   /* -> Progress of L oper    */
+#define TXSTATUS_LSM_STEP_BITS     0x00000700   /* -> Progress of L/S mult  */
+#define TXSTATUS_LSM_STEP_S        8
+#define TXSTATUS_FLAG_BITS         0x0000001F   /* -> All the flags         */
+#define TXSTATUS_SCC_BIT           0x00000010   /* -> Split-16 flags ...    */
+#define TXSTATUS_SCF_LZ_BIT        0x00000008   /* -> Split-16 Low  Z flag  */
+#define TXSTATUS_SCF_HZ_BIT        0x00000004   /* -> Split-16 High Z flag  */
+#define TXSTATUS_SCF_HC_BIT        0x00000002   /* -> Split-16 High C flag  */
+#define TXSTATUS_SCF_LC_BIT        0x00000001   /* -> Split-16 Low  C flag  */
+#define TXSTATUS_CF_Z_BIT          0x00000008   /* -> Condition Z flag      */
+#define TXSTATUS_CF_N_BIT          0x00000004   /* -> Condition N flag      */
+#define TXSTATUS_CF_O_BIT          0x00000002   /* -> Condition O flag      */
+#define TXSTATUS_CF_C_BIT          0x00000001   /* -> Condition C flag      */
+
+/*
+ * TXCATCH0-3 register contents may store information on a memory operation
+ * that has failed if the bit TXSTATUS_CBMARKER_BIT is set.
+ */
+#define TXCATCH0_REGNUM 16
+#define TXCATCH1_REGNUM 17
+#define     TXCATCH1_ADDR_BITS   0xFFFFFFFF   /* TXCATCH1 is Addr 0-31 */
+#define     TXCATCH1_ADDR_S      0
+#define TXCATCH2_REGNUM 18
+#define     TXCATCH2_DATA0_BITS  0xFFFFFFFF   /* TXCATCH2 is Data 0-31 */
+#define     TXCATCH2_DATA0_S     0
+#define TXCATCH3_REGNUM 19
+#define     TXCATCH3_DATA1_BITS  0xFFFFFFFF   /* TXCATCH3 is Data 32-63 */
+#define     TXCATCH3_DATA1_S     0
+
+/*
+ * Detailed catch state information
+ * --------------------------------
+ */
+
+/* Contents of TXCATCH0 register */
+#define     TXCATCH0_LDRXX_BITS  0xF8000000  /* Load destination reg 0-31 */
+#define     TXCATCH0_LDRXX_S     27
+#define     TXCATCH0_LDDST_BITS  0x07FF0000  /* Load destination bits */
+#define     TXCATCH0_LDDST_S     16
+#define         TXCATCH0_LDDST_D1DSP 0x400   /* One bit set if it's a LOAD */
+#define         TXCATCH0_LDDST_D0DSP 0x200
+#define         TXCATCH0_LDDST_TMPLT 0x100
+#define         TXCATCH0_LDDST_TR    0x080
+#ifdef METAC_2_1
+#define         TXCATCH0_LDDST_FPU   0x040
+#endif
+#define         TXCATCH0_LDDST_PC    0x020
+#define         TXCATCH0_LDDST_A1    0x010
+#define         TXCATCH0_LDDST_A0    0x008
+#define         TXCATCH0_LDDST_D1    0x004
+#define         TXCATCH0_LDDST_D0    0x002
+#define         TXCATCH0_LDDST_CT    0x001
+#ifdef METAC_2_1
+#define     TXCATCH0_WATCHSTOP_BIT 0x00004000  /* Set if Data Watch set fault */
+#endif
+#define     TXCATCH0_WATCHS_BIT  0x00004000  /* Set if Data Watch set fault */
+#define     TXCATCH0_WATCH1_BIT  0x00002000  /* Set if Data Watch 1 matches */
+#define     TXCATCH0_WATCH0_BIT  0x00001000  /* Set if Data Watch 0 matches */
+#define     TXCATCH0_FAULT_BITS  0x00000C00  /* See TXSTATUS_MEMFAULT_*     */
+#define     TXCATCH0_FAULT_S     10
+#define     TXCATCH0_PRIV_BIT    0x00000200  /* Privilege of transaction    */
+#define     TXCATCH0_READ_BIT    0x00000100  /* Set for Read or Load cases  */
+
+#ifdef METAC_2_1
+/* LNKGET Marker bit in TXCATCH0 */
+#define   TXCATCH0_LNKGET_MARKER_BIT 0x00000008
+#define       TXCATCH0_PREPROC_BIT  0x00000004
+#endif
+
+/* Loads are indicated by one of the LDDST bits being set */
+#define     TXCATCH0_LDM16_BIT   0x00000004  /* Load M16 flag */
+#define     TXCATCH0_LDL2L1_BITS 0x00000003  /* Load data size L2,L1 */
+#define     TXCATCH0_LDL2L1_S    0
+
+/* Reads are indicated by the READ bit being set without LDDST bits */
+#define     TXCATCH0_RAXX_BITS   0x0000001F  /* RAXX issue port for read */
+#define     TXCATCH0_RAXX_S      0
+
+/* Write operations are all that remain if READ bit is not set */
+#define     TXCATCH0_WMASK_BITS  0x000000FF  /* Write byte lane mask */
+#define     TXCATCH0_WMASK_S     0
+
+#ifdef METAC_2_1
+
+/* When a FPU exception is signalled then FPUSPEC == FPUSPEC_TAG */
+#define     TXCATCH0_FPURDREG_BITS    0xF8000000
+#define     TXCATCH0_FPURDREG_S       27
+#define     TXCATCH0_FPUR1REG_BITS    0x07C00000
+#define     TXCATCH0_FPUR1REG_S       22
+#define     TXCATCH0_FPUSPEC_BITS     0x000F0000
+#define     TXCATCH0_FPUSPEC_S        16
+#define         TXCATCH0_FPUSPEC_TAG      0xF
+#define     TXCATCH0_FPUINSTA_BIT     0x00001000
+#define     TXCATCH0_FPUINSTQ_BIT     0x00000800
+#define     TXCATCH0_FPUINSTZ_BIT     0x00000400
+#define     TXCATCH0_FPUINSTN_BIT     0x00000200
+#define     TXCATCH0_FPUINSTO3O_BIT   0x00000100
+#define     TXCATCH0_FPUWIDTH_BITS    0x000000C0
+#define     TXCATCH0_FPUWIDTH_S       6
+#define         TXCATCH0_FPUWIDTH_FLOAT   0
+#define         TXCATCH0_FPUWIDTH_DOUBLE  1
+#define         TXCATCH0_FPUWIDTH_PAIRED  2
+#define     TXCATCH0_FPUOPENC_BITS    0x0000003F
+#define     TXCATCH0_FPUOPENC_S       0
+#define         TXCATCH0_FPUOPENC_ADD     0  /* rop1=Rs1, rop3=Rs2 */
+#define         TXCATCH0_FPUOPENC_SUB     1  /* rop1=Rs1, rop3=Rs2 */
+#define         TXCATCH0_FPUOPENC_MUL     2  /* rop1=Rs1, rop2=Rs2 */
+#define         TXCATCH0_FPUOPENC_ATOI    3  /* rop3=Rs */
+#define         TXCATCH0_FPUOPENC_ATOX    4  /* rop3=Rs, uses #Imm */
+#define         TXCATCH0_FPUOPENC_ITOA    5  /* rop3=Rs */
+#define         TXCATCH0_FPUOPENC_XTOA    6  /* rop3=Rs, uses #Imm */
+#define         TXCATCH0_FPUOPENC_ATOH    7  /* rop2=Rs */
+#define         TXCATCH0_FPUOPENC_HTOA    8  /* rop2=Rs */
+#define         TXCATCH0_FPUOPENC_DTOF    9  /* rop3=Rs */
+#define         TXCATCH0_FPUOPENC_FTOD    10 /* rop3=Rs */
+#define         TXCATCH0_FPUOPENC_DTOL    11 /* rop3=Rs */
+#define         TXCATCH0_FPUOPENC_LTOD    12 /* rop3=Rs */
+#define         TXCATCH0_FPUOPENC_DTOXL   13 /* rop3=Rs, uses #imm */
+#define         TXCATCH0_FPUOPENC_XLTOD   14 /* rop3=Rs, uses #imm */
+#define         TXCATCH0_FPUOPENC_CMP     15 /* rop1=Rs1, rop2=Rs2 */
+#define         TXCATCH0_FPUOPENC_MIN     16 /* rop1=Rs1, rop2=Rs2 */
+#define         TXCATCH0_FPUOPENC_MAX     17 /* rop1=Rs1, rop2=Rs2 */
+#define         TXCATCH0_FPUOPENC_ADDRE   18 /* rop1=Rs1, rop3=Rs2 */
+#define         TXCATCH0_FPUOPENC_SUBRE   19 /* rop1=Rs1, rop3=Rs2 */
+#define         TXCATCH0_FPUOPENC_MULRE   20 /* rop1=Rs1, rop2=Rs2 */
+#define         TXCATCH0_FPUOPENC_MXA     21 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define         TXCATCH0_FPUOPENC_MXAS    22 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define         TXCATCH0_FPUOPENC_MAR     23 /* rop1=Rs1, rop2=Rs2 */
+#define         TXCATCH0_FPUOPENC_MARS    24 /* rop1=Rs1, rop2=Rs2 */
+#define         TXCATCH0_FPUOPENC_MUZ     25 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define         TXCATCH0_FPUOPENC_MUZS    26 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define         TXCATCH0_FPUOPENC_RCP     27 /* rop2=Rs */
+#define         TXCATCH0_FPUOPENC_RSQ     28 /* rop2=Rs */
+
+/* For floating point exceptions TXCATCH1 is used to carry extra data */
+#define     TXCATCH1_FPUR2REG_BITS    0xF8000000
+#define     TXCATCH1_FPUR2REG_S       27
+#define     TXCATCH1_FPUR3REG_BITS    0x07C00000  /* Undefined if O3O set */
+#define     TXCATCH1_FPUR3REG_S       22
+#define     TXCATCH1_FPUIMM16_BITS    0x0000FFFF
+#define     TXCATCH1_FPUIMM16_S       0
+
+#endif /* METAC_2_1 */
+
+/*
+ * TXDIVTIME register used to hold the partial base address of memory i/f
+ * state dump area. Now deprecated.
+ */
+#define     TXDIVTIME_CBBASE_MASK    0x03FFFE00
+#define     TXDIVTIME_CBBASE_LINBASE 0x80000000
+#define     TXDIVTIME_CBBASE_LINBOFF 0x00000000 /* BGnd state */
+#define     TXDIVTIME_CBBASE_LINIOFF 0x00000100 /* Int  state */
+
+/*
+ * TXDIVTIME register used to indicate if the read pipeline was dirty when a
+ * thread was interrupted, halted, or generated an exception. It is invalid
+ * to attempt to issue a further pipeline read address while the read
+ * pipeline is in the dirty state.
+ */
+#define     TXDIVTIME_RPDIRTY_BIT   0x80000000
+
+/*
+ * Further bits in the TXDIVTIME register allow interrupt handling code to
+ * short-cut the discovery the most significant bit last read from TXSTATI.
+ *
+ * This is the bit number of the trigger line that a low level interrupt
+ * handler should acknowledge and then perhaps the index of a corresponding
+ * handler function.
+ */
+#define     TXDIVTIME_IRQENC_BITS   0x0F000000
+#define     TXDIVTIME_IRQENC_S      24
+
+/*
+ * If TXDIVTIME_RPVALID_BIT is set the read pipeline contained significant
+ * information when the thread was interrupted|halted|exceptioned. Each slot
+ * containing data is indicated by a one bit in the corresponding
+ * TXDIVTIME_RPMASK_BITS bit (least significance bit relates to first
+ * location in read pipeline - most likely to have the 1 state). Empty slots
+ * contain zeroes with no interlock applied on reads if RPDIRTY is currently
+ * set with RPMASK itself being read-only state.
+ */
+#define     TXDIVTIME_RPMASK_BITS 0x003F0000   /* -> Full (1) Empty (0) */
+#define     TXDIVTIME_RPMASK_S    16
+
+/*
+ * TXPRIVEXT register can be used to single step thread execution and
+ * enforce synchronous memory i/f address checking for debugging purposes.
+ */
+#define     TXPRIVEXT_TXSTEP_BIT    0x00000004
+#define     TXPRIVEXT_MEMCHECK_BIT  0x00000002
+
+/*
+ * TXINTERNx registers holds internal state information for H/W debugging only
+ */
+#define TXINTERN0_REGNUM 23
+#define     TXINTERN0_LOCK2_BITS  0xF0000000
+#define     TXINTERN0_LOCK2_S     28
+#define     TXINTERN0_LOCK1_BITS  0x0F000000
+#define     TXINTERN0_LOCK1_S     24
+#define     TXINTERN0_TIFDF_BITS  0x0000F000
+#define     TXINTERN0_TIFDF_S     12
+#define     TXINTERN0_TIFIB_BITS  0x00000F00
+#define     TXINTERN0_TIFIB_S     8
+#define     TXINTERN0_TIFAF_BITS  0x000000F0
+#define     TXINTERN0_TIFAF_S     4
+#define     TXINTERN0_MSTATE_BITS 0x0000000F
+#define     TXINTERN0_MSTATE_S    0
+
+/*
+ * TXSTAT, TXMASK, TXPOLL, TXSTATI, TXMASKI, TXPOLLI registers from trigger
+ * bank all have similar contents (upper kick count bits not in MASK regs)
+ */
+#define TXSTAT_REGNUM  0
+#define     TXSTAT_TIMER_BIT    0x00000001
+#define     TXSTAT_TIMER_S      0
+#define     TXSTAT_KICK_BIT     0x00000002
+#define     TXSTAT_KICK_S       1
+#define     TXSTAT_DEFER_BIT    0x00000008
+#define     TXSTAT_DEFER_S      3
+#define     TXSTAT_EXTTRIG_BITS 0x0000FFF0
+#define     TXSTAT_EXTTRIG_S    4
+#define     TXSTAT_FPE_BITS     0x003F0000
+#define     TXSTAT_FPE_S        16
+#define     TXSTAT_FPE_DENORMAL_BIT    0x00200000
+#define     TXSTAT_FPE_DENORMAL_S      21
+#define     TXSTAT_FPE_INVALID_BIT     0x00100000
+#define     TXSTAT_FPE_INVALID_S       20
+#define     TXSTAT_FPE_DIVBYZERO_BIT   0x00080000
+#define     TXSTAT_FPE_DIVBYZERO_S     19
+#define     TXSTAT_FPE_OVERFLOW_BIT    0x00040000
+#define     TXSTAT_FPE_OVERFLOW_S      18
+#define     TXSTAT_FPE_UNDERFLOW_BIT   0x00020000
+#define     TXSTAT_FPE_UNDERFLOW_S     17
+#define     TXSTAT_FPE_INEXACT_BIT     0x00010000
+#define     TXSTAT_FPE_INEXACT_S       16
+#define     TXSTAT_BUSERR_BIT          0x00800000   /* Set if bus error/ack state */
+#define     TXSTAT_BUSERR_S            23
+#define         TXSTAT_BUSSTATE_BITS     0xFF000000 /* Read only */
+#define         TXSTAT_BUSSTATE_S        24
+#define     TXSTAT_KICKCNT_BITS 0xFFFF0000
+#define     TXSTAT_KICKCNT_S    16
+#define TXMASK_REGNUM  1
+#define TXSTATI_REGNUM 2
+#define     TXSTATI_BGNDHALT_BIT    0x00000004
+#define TXMASKI_REGNUM 3
+#define TXPOLL_REGNUM  4
+#define TXPOLLI_REGNUM 6
+
+/*
+ * TXDRCTRL register can be used to partition the DSP RAM space available to
+ * this thread at startup. This is achieved by offsetting the region allocated
+ * to each thread.
+ */
+#define     TXDRCTRL_D1PARTOR_BITS  0x00000F00  /* OR's into top 4 bits */
+#define     TXDRCTRL_D1PARTOR_S     8
+#define     TXDRCTRL_D0PARTOR_BITS  0x0000000F  /* OR's into top 4 bits */
+#define     TXDRCTRL_D0PARTOR_S     0
+/* Given extracted Pow and Or fields this is threads base within DSP RAM */
+#define     TXDRCTRL_DXBASE(Pow, Or)  ((Or)<<((Pow)-4))
+
+/*****************************************************************************
+ *                      RUN TIME TRACE CONTROL REGISTERS
+ ****************************************************************************/
+/*
+ * The following values are only relevant to code that implements run-time
+ *  trace features within the META Core
+ */
+#define TTEXEC      TT.0
+#define TTCTRL      TT.1
+#define TTMARK      TT.2
+#define TTREC       TT.3
+#define GTEXEC      TT.4
+
+#define TTEXEC_REGNUM               0
+#define     TTEXEC_EXTTRIGAND_BITS      0x7F000000
+#define     TTEXEC_EXTTRIGAND_S         24
+#define     TTEXEC_EXTTRIGEN_BIT        0x00008000
+#define     TTEXEC_EXTTRIGMATCH_BITS    0x00007F00
+#define     TTEXEC_EXTTRIGMATCH_S       8
+#define     TTEXEC_TCMODE_BITS          0x00000003
+#define     TTEXEC_TCMODE_S             0
+
+#define TTCTRL_REGNUM               1
+#define     TTCTRL_TRACETT_BITS         0x00008000
+#define     TTCTRL_TRACETT_S            15
+#define     TTCTRL_TRACEALL_BITS        0x00002000
+#define     TTCTRL_TRACEALL_S           13
+#ifdef METAC_2_1
+#define     TTCTRL_TRACEALLTAG_BITS     0x00000400
+#define     TTCTRL_TRACEALLTAG_S        10
+#endif /* METAC_2_1 */
+#define     TTCTRL_TRACETAG_BITS        0x00000200
+#define     TTCTRL_TRACETAG_S           9
+#define     TTCTRL_TRACETTPC_BITS       0x00000080
+#define     TTCTRL_TRACETTPC_S          7
+#define     TTCTRL_TRACEMPC_BITS        0x00000020
+#define     TTCTRL_TRACEMPC_S           5
+#define     TTCTRL_TRACEEN_BITS         0x00000008
+#define     TTCTRL_TRACEEN_S            3
+#define     TTCTRL_TRACEEN1_BITS        0x00000004
+#define     TTCTRL_TRACEEN1_S           2
+#define     TTCTRL_TRACEPC_BITS         0x00000002
+#define     TTCTRL_TRACEPC_S            1
+
+#ifdef METAC_2_1
+#define TTMARK_REGNUM   2
+#define TTMARK_BITS                 0xFFFFFFFF
+#define TTMARK_S                    0x0
+
+#define TTREC_REGNUM    3
+#define TTREC_BITS                  0xFFFFFFFFFFFFFFFF
+#define TTREC_S                     0x0
+#endif /* METAC_2_1 */
+
+#define GTEXEC_REGNUM               4
+#define     GTEXEC_DCRUN_BITS           0x80000000
+#define     GTEXEC_DCRUN_S              31
+#define     GTEXEC_ICMODE_BITS          0x0C000000
+#define     GTEXEC_ICMODE_S             26
+#define     GTEXEC_TCMODE_BITS          0x03000000
+#define     GTEXEC_TCMODE_S             24
+#define     GTEXEC_PERF1CMODE_BITS      0x00040000
+#define     GTEXEC_PERF1CMODE_S         18
+#define     GTEXEC_PERF0CMODE_BITS      0x00010000
+#define     GTEXEC_PERF0CMODE_S         16
+#define     GTEXEC_REFMSEL_BITS         0x0000F000
+#define     GTEXEC_REFMSEL_S            12
+#define     GTEXEC_METRICTH_BITS        0x000003FF
+#define     GTEXEC_METRICTH_S           0
+
+#ifdef METAC_2_1
+/*
+ * Clock Control registers
+ * -----------------------
+ */
+#define TXCLKCTRL_REGNUM        22
+
+/*
+ * Default setting is with clocks always on (DEFON), turning all clocks off
+ * can only be done from external devices (OFF), enabling automatic clock
+ * gating will allow clocks to stop as units fall idle.
+ */
+#define TXCLKCTRL_ALL_OFF       0x02222222
+#define TXCLKCTRL_ALL_DEFON     0x01111111
+#define TXCLKCTRL_ALL_AUTO      0x02222222
+
+/*
+ * Individual fields control caches, floating point and main data/addr units
+ */
+#define TXCLKCTRL_CLOCKIC_BITS  0x03000000
+#define TXCLKCTRL_CLOCKIC_S     24
+#define TXCLKCTRL_CLOCKDC_BITS  0x00300000
+#define TXCLKCTRL_CLOCKDC_S     20
+#define TXCLKCTRL_CLOCKFP_BITS  0x00030000
+#define TXCLKCTRL_CLOCKFP_S     16
+#define TXCLKCTRL_CLOCKD1_BITS  0x00003000
+#define TXCLKCTRL_CLOCKD1_S     12
+#define TXCLKCTRL_CLOCKD0_BITS  0x00000300
+#define TXCLKCTRL_CLOCKD0_S     8
+#define TXCLKCTRL_CLOCKA1_BITS  0x00000030
+#define TXCLKCTRL_CLOCKA1_S     4
+#define TXCLKCTRL_CLOCKA0_BITS  0x00000003
+#define TXCLKCTRL_CLOCKA0_S     0
+
+/*
+ * Individual settings for each field are common
+ */
+#define TXCLKCTRL_CLOCKxx_OFF   0
+#define TXCLKCTRL_CLOCKxx_DEFON 1
+#define TXCLKCTRL_CLOCKxx_AUTO  2
+
+#endif /* METAC_2_1 */
+
+#ifdef METAC_2_1
+/*
+ * Fast interrupt new bits
+ * ------------------------------------
+ */
+#define TXSTATUS_IPTOGGLE_BIT           0x80000000 /* Prev PToggle of TXPRIVEXT */
+#define TXSTATUS_ISTATE_BIT             0x40000000 /* IState bit */
+#define TXSTATUS_IWAIT_BIT              0x20000000 /* wait indefinitely in decision step*/
+#define TXSTATUS_IEXCEPT_BIT            0x10000000 /* Indicate an exception occured */
+#define TXSTATUS_IRPCOUNT_BITS          0x0E000000 /* Number of 'dirty' date entries*/
+#define TXSTATUS_IRPCOUNT_S             25
+#define TXSTATUS_IRQSTAT_BITS           0x0000F000 /* IRQEnc bits, trigger or interrupts */
+#define TXSTATUS_IRQSTAT_S              12
+#define TXSTATUS_LNKSETOK_BIT           0x00000020 /* LNKSetOK bit, successful LNKSET */
+
+/* New fields in TXDE for fast interrupt system */
+#define TXDIVTIME_IACTIVE_BIT           0x00008000 /* Enable new interrupt system */
+#define TXDIVTIME_INONEST_BIT           0x00004000 /* Gate nested interrupt */
+#define TXDIVTIME_IREGIDXGATE_BIT       0x00002000 /* gate of the IRegIdex field */
+#define TXDIVTIME_IREGIDX_BITS          0x00001E00 /* Index of A0.0/1 replaces */
+#define TXDIVTIME_IREGIDX_S             9
+#define TXDIVTIME_NOST_BIT              0x00000100 /* disable superthreading bit */
+#endif
+
+#endif /* _ASM_METAG_REGS_H_ */