Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

1 files changed, 25 insertions, 24 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1eabe575321..ae9c716c46b 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -108,12 +108,14 @@ config ATH79
 config BCM47XX
 	bool "Broadcom BCM47XX based boards"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select FW_CFE
 	select HW_HAS_PCI
 	select IRQ_CPU
+	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -295,6 +297,7 @@ config MIPS_MALTA
 	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
+	select CSRC_GIC
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
@@ -354,6 +357,7 @@ config MIPS_SEAD3
 	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
+	select USE_OF
 	help
 	  This enables support for the MIPS Technologies SEAD3 evaluation
 	  board.
@@ -385,16 +389,6 @@ config NXP_STB225
 	help
 	 Support for NXP Semiconductors STB225 Development Board.
 
-config PNX8550_JBS
-	bool "NXP PNX8550 based JBS board"
-	select PNX8550
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config PNX8550_STB810
-	bool "NXP PNX8550 based STB810 board"
-	select PNX8550
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config PMC_MSP
 	bool "PMC-Sierra MSP chipsets"
 	select CEVT_R4K
@@ -434,6 +428,22 @@ config POWERTV
 	help
 	  This enables support for the Cisco PowerTV Platform.
 
+config RALINK
+	bool "Ralink based machines"
+	select CEVT_R4K
+	select CSRC_R4K
+	select BOOT_RAW
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select USE_OF
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+	select HAVE_MACH_CLKDEV
+	select CLKDEV_LOOKUP
+
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
 	select FW_ARC
@@ -835,8 +845,9 @@ source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
-source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/pmcs-msp71xx/Kconfig"
 source "arch/mips/powertv/Kconfig"
+source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
@@ -917,6 +928,9 @@ config CSRC_POWERTV
 config CSRC_R4K
 	bool
 
+config CSRC_GIC
+	bool
+
 config CSRC_SB1250
 	bool
 
@@ -1103,19 +1117,6 @@ config SOC_PNX8335
 	bool
 	select SOC_PNX833X
 
-config PNX8550
-	bool
-	select SOC_PNX8550
-
-config SOC_PNX8550
-	bool
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select GENERIC_GPIO
-
 config SWAP_IO_SPACE
 	bool