MIPS: Alchemy: Move development board code to common subdirectory

This should ease sharing of common devboard code.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

4 files changed, 268 insertions, 0 deletions

diff --git a/arch/mips/alchemy/devboards/pb1000/Makefile b/arch/mips/alchemy/devboards/pb1000/Makefile
new file mode 100644
index 00000000000..99bbec0ca41
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1000/Makefile
@@ -0,0 +1,8 @@
+#
+#  Copyright 2000, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for the Alchemy Semiconductor Pb1000 board.
+#
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
new file mode 100644
index 00000000000..25df167a95b
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-pb1x00/pb1000.h>
+
+void board_reset(void)
+{
+}
+
+void __init board_setup(void)
+{
+	u32 pin_func, static_cfg0;
+	u32 sys_freqctrl, sys_clksrc;
+	u32 prid = read_c0_prid();
+
+	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
+	au_writel(8, SYS_AUXPLL);
+	au_writel(0, SYS_PINSTATERD);
+	udelay(100);
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* Zero and disable FREQ2 */
+	sys_freqctrl = au_readl(SYS_FREQCTRL0);
+	sys_freqctrl &= ~0xFFF00000;
+	au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+	/* Zero and disable USBH/USBD clocks */
+	sys_clksrc = au_readl(SYS_CLKSRC);
+	sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+		        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
+	au_writel(sys_clksrc, SYS_CLKSRC);
+
+	sys_freqctrl = au_readl(SYS_FREQCTRL0);
+	sys_freqctrl &= ~0xFFF00000;
+
+	sys_clksrc = au_readl(SYS_CLKSRC);
+	sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+		        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
+
+	switch (prid & 0x000000FF) {
+	case 0x00: /* DA */
+	case 0x01: /* HA */
+	case 0x02: /* HB */
+		/* CPU core freq to 48 MHz to slow it way down... */
+		au_writel(4, SYS_CPUPLL);
+
+		/*
+		 * Setup 48 MHz FREQ2 from CPUPLL for USB Host
+		 * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
+		 */
+		sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
+		au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+		/* CPU core freq to 384 MHz */
+		au_writel(0x20, SYS_CPUPLL);
+
+		printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
+		break;
+
+	default: /* HC and newer */
+		/* FREQ2 = aux / 2 = 48 MHz */
+		sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+				 SYS_FC_FE2 | SYS_FC_FS2;
+		au_writel(sys_freqctrl, SYS_FREQCTRL0);
+		break;
+	}
+
+	/*
+	 * Route 48 MHz FREQ2 into USB Host and/or Device
+	 */
+	sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
+	au_writel(sys_clksrc, SYS_CLKSRC);
+
+	/* Configure pins GPIO[14:9] as GPIO */
+	pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
+
+	/* 2nd USB port is USB host */
+	pin_func |= SYS_PF_USB;
+
+	au_writel(pin_func, SYS_PINFUNC);
+	au_writel(0x2800, SYS_TRIOUTCLR);
+	au_writel(0x0030, SYS_OUTPUTCLR);
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+
+	/* Make GPIO 15 an input (for interrupt line) */
+	pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
+	/* We don't need I2S, so make it available for GPIO[31:29] */
+	pin_func |= SYS_PF_I2S;
+	au_writel(pin_func, SYS_PINFUNC);
+
+	au_writel(0x8000, SYS_TRIOUTCLR);
+
+	static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
+	au_writel(static_cfg0, MEM_STCFG0);
+
+	/* configure RCE2* for LCD */
+	au_writel(0x00000004, MEM_STCFG2);
+
+	/* MEM_STTIME2 */
+	au_writel(0x09000000, MEM_STTIME2);
+
+	/* Set 32-bit base address decoding for RCE2* */
+	au_writel(0x10003ff0, MEM_STADDR2);
+
+	/*
+	 * PCI CPLD setup
+	 * Expand CE0 to cover PCI
+	 */
+	au_writel(0x11803e40, MEM_STADDR1);
+
+	/* Burst visibility on */
+	au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
+
+	au_writel(0x83, MEM_STCFG1);	     /* ewait enabled, flash timing */
+	au_writel(0x33030a10, MEM_STTIME1);  /* slower timing for FPGA */
+
+	/* Setup the static bus controller */
+	au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
+	au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
+	au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
+
+	/*
+	 * Enable Au1000 BCLK switching - note: sed1356 must not use
+	 * its BCLK (Au1000 LCLK) for any timings
+	 */
+	switch (prid & 0x000000FF) {
+	case 0x00: /* DA */
+	case 0x01: /* HA */
+	case 0x02: /* HB */
+		break;
+	default:  /* HC and newer */
+		/*
+		 * Enable sys bus clock divider when IDLE state or no bus
+		 * activity.
+		 */
+		au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
+		break;
+	}
+}
diff --git a/arch/mips/alchemy/devboards/pb1000/init.c b/arch/mips/alchemy/devboards/pb1000/init.c
new file mode 100644
index 00000000000..640055b8ac6
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1000/init.c
@@ -0,0 +1,57 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Pb1000 board setup
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/bootinfo.h>
+
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1000";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = (int)fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str)
+		memsize = 0x04000000;
+	else
+		strict_strtoul(memsize_str, 0, &memsize);
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/alchemy/devboards/pb1000/irqmap.c b/arch/mips/alchemy/devboards/pb1000/irqmap.c
new file mode 100644
index 00000000000..b3d56b0af32
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1000/irqmap.c
@@ -0,0 +1,38 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1xxx irq map table
+ *
+ * Copyright 2003 Embedded Edge, LLC
+ *		dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+	{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
+};
+
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);