Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

4 files changed, 313 insertions, 0 deletions

diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/au1000/pb1000/Makefile
new file mode 100644
index 00000000000..daa1a507e72
--- /dev/null
+++ b/arch/mips/au1000/pb1000/Makefile
@@ -0,0 +1,8 @@
+#
+#  Copyright 2000 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc.
+#     	ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the Alchemy Semiconductor PB1000 board.
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c
new file mode 100644
index 00000000000..2fa211b6932
--- /dev/null
+++ b/arch/mips/au1000/pb1000/board_setup.c
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-pb1x00/pb1000.h>
+
+void board_reset (void)
+{
+}
+
+void __init board_setup(void)
+{
+	u32 pin_func, static_cfg0;
+	u32 sys_freqctrl, sys_clksrc;
+	u32 prid = read_c0_prid();
+
+	// set AUX clock to 12MHz * 8 = 96 MHz
+	au_writel(8, SYS_AUXPLL);
+	au_writel(0, SYS_PINSTATERD);
+	udelay(100);
+
+#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
+	/* zero and disable FREQ2 */
+	sys_freqctrl = au_readl(SYS_FREQCTRL0);
+	sys_freqctrl &= ~0xFFF00000;
+	au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+	/* zero and disable USBH/USBD clocks */
+	sys_clksrc = au_readl(SYS_CLKSRC);
+	sys_clksrc &= ~0x00007FE0;
+	au_writel(sys_clksrc, SYS_CLKSRC);
+
+	sys_freqctrl = au_readl(SYS_FREQCTRL0);
+	sys_freqctrl &= ~0xFFF00000;
+
+	sys_clksrc = au_readl(SYS_CLKSRC);
+	sys_clksrc &= ~0x00007FE0;
+
+	switch (prid & 0x000000FF)
+	{
+	case 0x00: /* DA */
+	case 0x01: /* HA */
+	case 0x02: /* HB */
+	/* CPU core freq to 48MHz to slow it way down... */
+	au_writel(4, SYS_CPUPLL);
+
+	/*
+	 * Setup 48MHz FREQ2 from CPUPLL for USB Host
+	 */
+	/* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */
+	sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20));
+	au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+	/* CPU core freq to 384MHz */
+	au_writel(0x20, SYS_CPUPLL);
+
+	printk("Au1000: 48MHz OHCI workaround enabled\n");
+		break;
+
+	default:  /* HC and newer */
+	// FREQ2 = aux/2 = 48 MHz
+	sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+	au_writel(sys_freqctrl, SYS_FREQCTRL0);
+		break;
+	}
+
+	/*
+	 * Route 48MHz FREQ2 into USB Host and/or Device
+	 */
+#ifdef CONFIG_USB_OHCI
+	sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
+#endif
+#ifdef CONFIG_AU1X00_USB_DEVICE
+	sys_clksrc |= ((4<<7) | (0<<6) | (0<<5));
+#endif
+	au_writel(sys_clksrc, SYS_CLKSRC);
+
+	// configure pins GPIO[14:9] as GPIO
+	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
+
+#ifndef CONFIG_AU1X00_USB_DEVICE
+	// 2nd USB port is USB host
+	pin_func |= 0x8000;
+#endif
+	au_writel(pin_func, SYS_PINFUNC);
+	au_writel(0x2800, SYS_TRIOUTCLR);
+	au_writel(0x0030, SYS_OUTPUTCLR);
+#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
+
+	// make gpio 15 an input (for interrupt line)
+	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
+	// we don't need I2S, so make it available for GPIO[31:29]
+	pin_func |= (1<<5);
+	au_writel(pin_func, SYS_PINFUNC);
+
+	au_writel(0x8000, SYS_TRIOUTCLR);
+
+	static_cfg0 = au_readl(MEM_STCFG0) & (u32)(~0xc00);
+	au_writel(static_cfg0, MEM_STCFG0);
+
+	// configure RCE2* for LCD
+	au_writel(0x00000004, MEM_STCFG2);
+
+	// MEM_STTIME2
+	au_writel(0x09000000, MEM_STTIME2);
+
+	// Set 32-bit base address decoding for RCE2*
+	au_writel(0x10003ff0, MEM_STADDR2);
+
+	// PCI CPLD setup
+	// expand CE0 to cover PCI
+	au_writel(0x11803e40, MEM_STADDR1);
+
+	// burst visibility on
+	au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
+
+	au_writel(0x83, MEM_STCFG1);         // ewait enabled, flash timing
+	au_writel(0x33030a10, MEM_STTIME1);   // slower timing for FPGA
+
+	/* setup the static bus controller */
+	au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
+	au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
+	au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
+
+#ifdef CONFIG_PCI
+	au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
+	au_writel(0, SDRAM_MBAR);        // set mbar to 0
+	au_writel(0x2, SDRAM_CMD);       // enable memory accesses
+	au_sync_delay(1);
+#endif
+
+	/* Enable Au1000 BCLK switching - note: sed1356 must not use
+	 * its BCLK (Au1000 LCLK) for any timings */
+	switch (prid & 0x000000FF)
+	{
+	case 0x00: /* DA */
+	case 0x01: /* HA */
+	case 0x02: /* HB */
+		break;
+	default:  /* HC and newer */
+		/* Enable sys bus clock divider when IDLE state or no bus 
+		   activity. */
+		au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
+		break;
+	}
+}
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
new file mode 100644
index 00000000000..34713c5df0d
--- /dev/null
+++ b/arch/mips/au1000/pb1000/init.c
@@ -0,0 +1,69 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	PB1000 board setup
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1000";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = (int) fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+
+	mips_machgroup = MACH_GROUP_ALCHEMY;
+	mips_machtype = MACH_PB1000;
+
+	prom_init_cmdline();
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+		memsize = 0x04000000;
+	} else {
+		memsize = simple_strtol(memsize_str, NULL, 0);
+	}
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+	return 0;
+}
diff --git a/arch/mips/au1000/pb1000/irqmap.c b/arch/mips/au1000/pb1000/irqmap.c
new file mode 100644
index 00000000000..a3c460e3c23
--- /dev/null
+++ b/arch/mips/au1000/pb1000/irqmap.c
@@ -0,0 +1,54 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1xxx irq map table
+ *
+ * Copyright 2003 Embedded Edge, LLC
+ *		dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+	{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);