MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 179 insertions, 0 deletions

diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
new file mode 100644
index 00000000000..1a515b8c870
--- /dev/null
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -0,0 +1,179 @@
+/*
+ * AMD Alchemy DBAu1x00 Reference Boards
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1X00_H
+#define __ASM_DB1X00_H
+
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#ifdef CONFIG_MIPS_DB1550
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define AC97_PSC_BASE		PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
+#define I2S_PSC_BASE		PSC3_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 	0xAF000000
+#define NAND_PHYS_ADDR		0x20000000
+
+#else
+#define BCSR_KSEG1_ADDR 0xAE000000
+#endif
+
+/*
+ * Overlay data structure of the DBAu1x00 board registers.
+ * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
+ */
+typedef volatile struct
+{
+	/*00*/	unsigned short whoami;
+	unsigned short reserved0;
+	/*04*/	unsigned short status;
+	unsigned short reserved1;
+	/*08*/	unsigned short switches;
+	unsigned short reserved2;
+	/*0C*/	unsigned short resets;
+	unsigned short reserved3;
+	/*10*/	unsigned short pcmcia;
+	unsigned short reserved4;
+	/*14*/	unsigned short specific;
+	unsigned short reserved5;
+	/*18*/	unsigned short leds;
+	unsigned short reserved6;
+	/*1C*/	unsigned short swreset;
+	unsigned short reserved7;
+
+} BCSR;
+
+
+/*
+ * Register/mask bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID		0x000F
+#define BCSR_WHOAMI_CPLD		0x00F0
+#define BCSR_WHOAMI_BOARD		0x0F00
+
+#define BCSR_STATUS_PC0VS		0x0003
+#define BCSR_STATUS_PC1VS		0x000C
+#define BCSR_STATUS_PC0FI		0x0010
+#define BCSR_STATUS_PC1FI		0x0020
+#define BCSR_STATUS_FLASHBUSY		0x0100
+#define BCSR_STATUS_ROMBUSY		0x0400
+#define BCSR_STATUS_SWAPBOOT		0x2000
+#define BCSR_STATUS_FLASHDEN		0xC000
+
+#define BCSR_SWITCHES_DIP		0x00FF
+#define BCSR_SWITCHES_DIP_1		0x0080
+#define BCSR_SWITCHES_DIP_2		0x0040
+#define BCSR_SWITCHES_DIP_3		0x0020
+#define BCSR_SWITCHES_DIP_4		0x0010
+#define BCSR_SWITCHES_DIP_5		0x0008
+#define BCSR_SWITCHES_DIP_6		0x0004
+#define BCSR_SWITCHES_DIP_7		0x0002
+#define BCSR_SWITCHES_DIP_8		0x0001
+#define BCSR_SWITCHES_ROTARY		0x0F00
+
+#define BCSR_RESETS_PHY0		0x0001
+#define BCSR_RESETS_PHY1		0x0002
+#define BCSR_RESETS_DC			0x0004
+#define BCSR_RESETS_FIR_SEL		0x2000
+#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
+#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
+#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
+#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
+#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
+
+#define BCSR_PCMCIA_PC0VPP		0x0003
+#define BCSR_PCMCIA_PC0VCC		0x000C
+#define BCSR_PCMCIA_PC0DRVEN		0x0010
+#define BCSR_PCMCIA_PC0RST		0x0080
+#define BCSR_PCMCIA_PC1VPP		0x0300
+#define BCSR_PCMCIA_PC1VCC		0x0C00
+#define BCSR_PCMCIA_PC1DRVEN		0x1000
+#define BCSR_PCMCIA_PC1RST		0x8000
+
+#define BCSR_BOARD_PCIM66EN		0x0001
+#define BCSR_BOARD_SD0_PWR		0x0040
+#define BCSR_BOARD_SD1_PWR		0x0080
+#define BCSR_BOARD_PCIM33		0x0100
+#define BCSR_BOARD_GPIO200RST		0x0400
+#define BCSR_BOARD_PCICFG		0x1000
+#define BCSR_BOARD_SD0_WP		0x4000
+#define BCSR_BOARD_SD1_WP		0x8000
+
+#define BCSR_LEDS_DECIMALS		0x0003
+#define BCSR_LEDS_LED0			0x0100
+#define BCSR_LEDS_LED1			0x0200
+#define BCSR_LEDS_LED2			0x0400
+#define BCSR_LEDS_LED3			0x0800
+
+#define BCSR_SWRESET_RESET		0x0080
+
+/* PCMCIA DBAu1x00 specific defines */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+/*
+ * NAND defines
+ *
+ * Timing values as described in databook, * ns value stripped of the
+ * lower 2 bits.
+ * These defines are here rather than an Au1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H		(18 >> 2)
+#define NAND_T_PUL		(30 >> 2)
+#define NAND_T_SU		(30 >> 2)
+#define NAND_T_WH		(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
+			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
+#define NAND_CS 	1
+
+/* Should be done by YAMON */
+#define NAND_STCFG	0x00400005 /* 8-bit NAND */
+#define NAND_STTIME	0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR	0x12000FFF /* physical address 0x20000000 */
+
+#endif /* __ASM_DB1X00_H */