Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

7 files changed, 988 insertions, 0 deletions

diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile
new file mode 100644
index 00000000000..aab8fd89f83
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Momentum Computer's Ocelot-3 board.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+obj-y	 += int-handler.o irq.o prom.o reset.o setup.o
diff --git a/arch/mips/momentum/ocelot_3/int-handler.S b/arch/mips/momentum/ocelot_3/int-handler.S
new file mode 100644
index 00000000000..4522f09ed76
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/int-handler.S
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ * First-level interrupt dispatcher for Ocelot-3 board.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * First level interrupt dispatcher for Ocelot-3 board
+ */
+		.align	5
+		NESTED(ocelot3_handle_int, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+
+		mfc0	t0, CP0_CAUSE
+		mfc0	t2, CP0_STATUS
+
+		and	t0, t2
+
+		andi	t1, t0, STATUSF_IP0	/* sw0 software interrupt (IRQ0) */
+		bnez	t1, ll_sw0_irq
+
+		andi	t1, t0, STATUSF_IP1	/* sw1 software interrupt (IRQ1) */
+		bnez	t1, ll_sw1_irq
+
+		andi	t1, t0, STATUSF_IP2	/* int0 hardware line (IRQ2) */
+		bnez	t1, ll_pci0slot1_irq
+
+		andi	t1, t0, STATUSF_IP3	/* int1 hardware line (IRQ3) */
+		bnez	t1, ll_pci0slot2_irq
+
+		andi	t1, t0, STATUSF_IP4	/* int2 hardware line (IRQ4) */
+		bnez	t1, ll_pci1slot1_irq
+
+		andi	t1, t0, STATUSF_IP5	/* int3 hardware line (IRQ5) */
+		bnez	t1, ll_pci1slot2_irq
+
+		andi	t1, t0, STATUSF_IP6	/* int4 hardware line (IRQ6) */
+		bnez	t1, ll_uart_irq
+
+		andi	t1, t0, STATUSF_IP7	/* cpu timer (IRQ7) */
+		bnez	t1, ll_cputimer_irq
+
+                /* now look at extended interrupts */
+                mfc0    t0, CP0_CAUSE
+                cfc0    t1, CP0_S1_INTCONTROL
+
+                /* shift the mask 8 bits left to line up the bits */
+                sll     t2, t1, 8
+
+                and     t0, t2
+                srl     t0, t0, 16
+
+                andi    t1, t0, STATUSF_IP8     /* int6 hardware line (IRQ9) */
+                bnez    t1, ll_mv64340_decode_irq
+
+		.set	reorder
+
+		/* wrong alarm or masked ... */
+		j	spurious_interrupt
+		nop
+		END(ocelot3_handle_int)
+
+		.align	5
+ll_sw0_irq:
+		li	a0, 0		/* IRQ 1 */
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+ll_sw1_irq:
+		li	a0, 1		/* IRQ 2 */
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_pci0slot1_irq:
+		li	a0, 2		/* IRQ 3 */
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_pci0slot2_irq:
+		li	a0, 3		/* IRQ 4 */
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_pci1slot1_irq:
+		li	a0, 4		/* IRQ 5 */
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_pci1slot2_irq:
+		li	a0, 5		/* IRQ 6 */
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_uart_irq:
+		li	a0, 6		/* IRQ 7 */
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_cputimer_irq:
+		li	a0, 7		/* IRQ 8 */
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_mv64340_decode_irq:
+		move	a0, sp
+		jal	ll_mv64340_irq
+		j	ret_from_irq
+
diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c
new file mode 100644
index 00000000000..42464dbd4ad
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/irq.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Copyright (C) 2004 MontaVista Software Inc.
+ *  Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+extern asmlinkage void ocelot3_handle_int(void);
+
+static struct irqaction cascade_mv64340 = {
+	no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
+};
+
+void __init arch_init_irq(void)
+{
+	/*
+	 * Clear all of the interrupts while we change the able around a bit.
+	 * int-handler is not on bootstrap
+	 */
+	clear_c0_status(ST0_IM | ST0_BEV);
+
+	/* Sets the first-level interrupt dispatcher. */
+	set_except_vector(0, ocelot3_handle_int);
+	mips_cpu_irq_init(0);
+	rm7k_cpu_irq_init(8);
+
+	/* set up the cascading interrupts */
+	setup_irq(8, &cascade_mv64340);		/* unmask intControl IM8, IRQ 9 */
+	mv64340_irq_init(16);
+
+	set_c0_status(ST0_IM); /* IE in the status register */
+
+}
diff --git a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
new file mode 100644
index 00000000000..227e429fe72
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
@@ -0,0 +1,57 @@
+/*
+ * Ocelot-3 Board Register Definitions
+ *
+ * (C) 2002 Momentum Computer Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Louis Hamilton, Red Hat, Inc.
+ *    hamilton@redhat.com  [MIPS64 modifications]
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ */
+
+#ifndef __OCELOT_3_FPGA_H__
+#define __OCELOT_3_FPGA_H__
+
+#define OCELOT_3_REG_BOARDREV		0x0
+#define OCELOT_3_REG_FPGA_REV		0x1
+#define OCELOT_3_REG_FPGA_TYPE		0x2
+#define OCELOT_3_REG_RESET_STATUS	0x3
+#define OCELOT_3_REG_BOARD_STATUS	0x4
+#define OCELOT_3_REG_CPCI_ID		0x5
+#define OCELOT_3_REG_SET		0x6
+#define OCELOT_3_REG_CLR		0x7
+#define OCELOT_3_REG_EEPROM_MODE	0x9
+#define OCELOT_3_REG_INTMASK		0xa
+#define OCELOT_3_REG_INTSTAT		0xb
+#define OCELOT_3_REG_UART_INTMASK	0xc
+#define OCELOT_3_REG_UART_INTSTAT	0xd
+#define OCELOT_3_REG_INTSET		0xe
+#define OCELOT_3_REG_INTCLR		0xf
+
+extern unsigned long ocelot_fpga_base;
+
+#define OCELOT_FPGA_WRITE(x, y) writeb(x, ocelot_fpga_base + OCELOT_3_REG_##y)
+#define OCELOT_FPGA_READ(x) readb(ocelot_fpga_base + OCELOT_3_REG_##x)
+
+#endif
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
new file mode 100644
index 00000000000..89c17a0c0be
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/prom.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ *   hamilton@redhat.com  [MIPS64 modifications]
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mv643xx.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/pmon.h>
+#include "ocelot_3_fpga.h"
+
+struct callvectors* debug_vectors;
+extern unsigned long marvell_base;
+extern unsigned long cpu_clock;
+
+#ifdef CONFIG_MV643XX_ETH
+extern unsigned char prom_mac_addr_base[6];
+#endif
+
+const char *get_system_type(void)
+{
+	return "Momentum Ocelot-3";
+}
+
+#ifdef CONFIG_MV643XX_ETH
+void burn_clocks(void)
+{
+	int i;
+
+	/* this loop should burn at least 1us -- this should be plenty */
+	for (i = 0; i < 0x10000; i++)
+		;
+}
+
+u8 exchange_bit(u8 val, u8 cs)
+{
+	/* place the data */
+	OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+	burn_clocks();
+
+	/* turn the clock on */
+	OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+	burn_clocks();
+
+	/* turn the clock off and read-strobe */
+	OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+	/* return the data */
+	return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
+}
+
+void get_mac(char dest[6])
+{
+	u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+	int i,j;
+
+	for (i = 0; i < 12; i++)
+		exchange_bit(read_opcode[i], 1);
+
+	for (j = 0; j < 6; j++) {
+		dest[j] = 0;
+		for (i = 0; i < 8; i++) {
+			dest[j] <<= 1;
+			dest[j] |= exchange_bit(0, 1);
+		}
+	}
+
+	/* turn off CS */
+	exchange_bit(0,0);
+}
+#endif
+
+
+#ifdef CONFIG_MIPS64
+
+unsigned long signext(unsigned long addr)
+{
+	addr &= 0xffffffff;
+	return (unsigned long)((int)addr);
+}
+
+void *get_arg(unsigned long args, int arc)
+{
+	unsigned long ul;
+	unsigned char *puc, uc;
+
+	args += (arc * 4);
+	ul = (unsigned long)signext(args);
+	puc = (unsigned char *)ul;
+	if (puc == 0)
+		return (void *)0;
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	uc = *puc++;
+	ul = (unsigned long)uc;
+	uc = *puc++;
+	ul |= (((unsigned long)uc) << 8);
+	uc = *puc++;
+	ul |= (((unsigned long)uc) << 16);
+	uc = *puc++;
+	ul |= (((unsigned long)uc) << 24);
+#else  /* CONFIG_CPU_LITTLE_ENDIAN */
+	uc = *puc++;
+	ul = ((unsigned long)uc) << 24;
+	uc = *puc++;
+	ul |= (((unsigned long)uc) << 16);
+	uc = *puc++;
+	ul |= (((unsigned long)uc) << 8);
+	uc = *puc++;
+	ul |= ((unsigned long)uc);
+#endif  /* CONFIG_CPU_LITTLE_ENDIAN */
+	ul = signext(ul);
+	return (void *)ul;
+}
+
+char *arg64(unsigned long addrin, int arg_index)
+{
+	unsigned long args;
+	char *p;
+
+	args = signext(addrin);
+	p = (char *)get_arg(args, arg_index);
+
+	return p;
+}
+#endif  /* CONFIG_MIPS64 */
+
+void __init prom_init(void)
+{
+	int argc = fw_arg0;
+	char **arg = (char **) fw_arg1;
+	char **env = (char **) fw_arg2;
+	struct callvectors *cv = (struct callvectors *) fw_arg3;
+	int i;
+
+#ifdef CONFIG_MIPS64
+	char *ptr;
+	printk("prom_init - MIPS64\n");
+
+	/* save the PROM vectors for debugging use */
+	debug_vectors = (struct callvectors *)signext((unsigned long)cv);
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+
+	for (i = 1; i < argc; i++) {
+		ptr = (char *)arg64((unsigned long)arg, i);
+		if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
+		    sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, ptr);
+		strcat(arcs_cmdline, " ");
+	}
+	i = 0;
+
+	while (1) {
+		ptr = (char *)arg64((unsigned long)env, i);
+		if (! ptr)
+			break;
+
+		if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
+			marvell_base = simple_strtol(ptr + strlen("gtbase="),
+							NULL, 16);
+
+			if ((marvell_base & 0xffffffff00000000) == 0)
+				marvell_base |= 0xffffffff00000000;
+
+			printk("marvell_base set to 0x%016lx\n", marvell_base);
+		}
+		if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
+			cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
+							NULL, 10);
+			printk("cpu_clock set to %d\n", cpu_clock);
+		}
+		i++;
+	}
+	printk("arcs_cmdline: %s\n", arcs_cmdline);
+
+#else   /* CONFIG_MIPS64 */
+
+	/* save the PROM vectors for debugging use */
+	debug_vectors = cv;
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+	for (i = 1; i < argc; i++) {
+		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+		    >= sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, arg[i]);
+		strcat(arcs_cmdline, " ");
+	}
+
+	while (*env) {
+		if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
+			marvell_base = simple_strtol(*env + strlen("gtbase="),
+							NULL, 16);
+		}
+		if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
+			cpu_clock = simple_strtol(*env + strlen("cpuclock="),
+							NULL, 10);
+		}
+		env++;
+	}
+#endif /* CONFIG_MIPS64 */
+
+	mips_machgroup = MACH_GROUP_MOMENCO;
+	mips_machtype = MACH_MOMENCO_OCELOT_3;
+
+#ifdef CONFIG_MV643XX_ETH
+	/* get the base MAC address for on-board ethernet ports */
+	get_mac(prom_mac_addr_base);
+#endif
+
+#ifndef CONFIG_MIPS64
+	debug_vectors->printf("Booting Linux kernel...\n");
+#endif
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
+{
+}
diff --git a/arch/mips/momentum/ocelot_3/reset.c b/arch/mips/momentum/ocelot_3/reset.c
new file mode 100644
index 00000000000..72b4423c086
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/reset.c
@@ -0,0 +1,59 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 1997, 01, 05 Ralf Baechle
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com  [MIPS64 modifications]
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+
+void momenco_ocelot_restart(char *command)
+{
+	/* base address of timekeeper portion of part */
+	void *nvram = (void *) 0xfc807000L;
+
+ 	/* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
+	writeb(0x84, nvram + 0xff7);
+
+	/* wait for the watchdog to go off */
+	mdelay(100+(1000/16));
+
+	/* if the watchdog fails for some reason, let people know */
+	printk(KERN_NOTICE "Watchdog reset failed\n");
+}
+
+void momenco_ocelot_halt(void)
+{
+	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+	while (1)
+		__asm__(".set\tmips3\n\t"
+	                "wait\n\t"
+			".set\tmips0");
+}
+
+void momenco_ocelot_power_off(void)
+{
+	momenco_ocelot_halt();
+}
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
new file mode 100644
index 00000000000..ce2efcbab7a
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -0,0 +1,398 @@
+/*
+ * setup.c
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Momentum Computer Ocelot-3 board dependent boot routines
+ *
+ * Copyright (C) 1996, 1997, 01, 05  Ralf Baechle
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2001 Red Hat, Inc.
+ * Copyright (C) 2002 Momentum Computer
+ *
+ * Author: Matthew Dharm, Momentum Computer
+ *   mdharm@momenco.com
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ *   hamilton@redhat.com  [MIPS64 modifications]
+ *
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mc146818rtc.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <linux/bootmem.h>
+#include <linux/mv643xx.h>
+#include <asm/time.h>
+#include <asm/page.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/mc146818rtc.h>
+#include <asm/tlbflush.h>
+#include "ocelot_3_fpga.h"
+
+/* Marvell Discovery Register Base */
+unsigned long marvell_base = (signed)0xf4000000;
+
+/* CPU clock */
+unsigned long cpu_clock;
+
+/* RTC/NVRAM */
+unsigned char* rtc_base = (unsigned char*)(signed)0xfc800000;
+
+/* FPGA Base */
+unsigned long ocelot_fpga_base = (signed)0xfc000000;
+
+/* Serial base */
+unsigned long uart_base = (signed)0xfd000000;
+
+/*
+ * Marvell Discovery SRAM. This is one place where Ethernet
+ * Tx and Rx descriptors can be placed to improve performance
+ */
+extern unsigned long mv64340_sram_base;
+
+/* These functions are used for rebooting or halting the machine*/
+extern void momenco_ocelot_restart(char *command);
+extern void momenco_ocelot_halt(void);
+extern void momenco_ocelot_power_off(void);
+
+void momenco_time_init(void);
+static char reset_reason;
+
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+		     unsigned long entryhi, unsigned long pagemask);
+
+static inline unsigned long ENTRYLO(unsigned long paddr)
+{
+	return ((paddr & PAGE_MASK) |
+		(_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
+		_CACHE_UNCACHED)) >> 6;
+}
+
+void __init bus_error_init(void)
+{
+	/* nothing */
+}
+
+/*
+ * setup code for a handoff from a version 2 PMON 2000 PROM
+ */
+void setup_wired_tlb_entries(void)
+{
+	write_c0_wired(0);
+	local_flush_tlb_all();
+
+	/* marvell and extra space */
+	add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), (signed)0xf4000000, PM_64K);
+
+	/* fpga, rtc, and uart */
+	add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), (signed)0xfc000000, PM_16M);
+}
+
+#define CONV_BCD_TO_BIN(val)	(((val) & 0xf) + (((val) >> 4) * 10))
+#define CONV_BIN_TO_BCD(val)	(((val) % 10) + (((val) / 10) << 4))
+
+unsigned long m48t37y_get_time(void)
+{
+	unsigned int year, month, day, hour, min, sec;
+
+	/* stop the update */
+	rtc_base[0x7ff8] = 0x40;
+
+	year = CONV_BCD_TO_BIN(rtc_base[0x7fff]);
+	year += CONV_BCD_TO_BIN(rtc_base[0x7ff1]) * 100;
+
+	month = CONV_BCD_TO_BIN(rtc_base[0x7ffe]);
+
+	day = CONV_BCD_TO_BIN(rtc_base[0x7ffd]);
+
+	hour = CONV_BCD_TO_BIN(rtc_base[0x7ffb]);
+	min = CONV_BCD_TO_BIN(rtc_base[0x7ffa]);
+	sec = CONV_BCD_TO_BIN(rtc_base[0x7ff9]);
+
+	/* start the update */
+	rtc_base[0x7ff8] = 0x00;
+
+	return mktime(year, month, day, hour, min, sec);
+}
+
+int m48t37y_set_time(unsigned long sec)
+{
+	struct rtc_time tm;
+
+	/* convert to a more useful format -- note months count from 0 */
+	to_tm(sec, &tm);
+	tm.tm_mon += 1;
+
+	/* enable writing */
+	rtc_base[0x7ff8] = 0x80;
+
+	/* year */
+	rtc_base[0x7fff] = CONV_BIN_TO_BCD(tm.tm_year % 100);
+	rtc_base[0x7ff1] = CONV_BIN_TO_BCD(tm.tm_year / 100);
+
+	/* month */
+	rtc_base[0x7ffe] = CONV_BIN_TO_BCD(tm.tm_mon);
+
+	/* day */
+	rtc_base[0x7ffd] = CONV_BIN_TO_BCD(tm.tm_mday);
+
+	/* hour/min/sec */
+	rtc_base[0x7ffb] = CONV_BIN_TO_BCD(tm.tm_hour);
+	rtc_base[0x7ffa] = CONV_BIN_TO_BCD(tm.tm_min);
+	rtc_base[0x7ff9] = CONV_BIN_TO_BCD(tm.tm_sec);
+
+	/* day of week -- not really used, but let's keep it up-to-date */
+	rtc_base[0x7ffc] = CONV_BIN_TO_BCD(tm.tm_wday + 1);
+
+	/* disable writing */
+	rtc_base[0x7ff8] = 0x00;
+
+	return 0;
+}
+
+void momenco_timer_setup(struct irqaction *irq)
+{
+	setup_irq(7, irq);	/* Timer interrupt, unmask status IM7 */
+}
+
+void momenco_time_init(void)
+{
+	setup_wired_tlb_entries();
+
+	/*
+	 * Ocelot-3 board has been built with both
+	 * the Rm7900 and the Rm7065C
+	 */
+	mips_hpt_frequency = cpu_clock / 2;
+	board_timer_setup = momenco_timer_setup;
+
+	rtc_get_time = m48t37y_get_time;
+	rtc_set_time = m48t37y_set_time;
+}
+
+/*
+ * PCI Support for Ocelot-3
+ */
+
+/* Bus #0 IO and MEM space */
+#define	OCELOT_3_PCI_IO_0_START		0xe0000000
+#define	OCELOT_3_PCI_IO_0_SIZE		0x08000000
+#define	OCELOT_3_PCI_MEM_0_START	0xc0000000
+#define	OCELOT_3_PCI_MEM_0_SIZE		0x10000000
+
+/* Bus #1 IO and MEM space */
+#define	OCELOT_3_PCI_IO_1_START		0xe8000000
+#define	OCELOT_3_PCI_IO_1_SIZE		0x08000000
+#define	OCELOT_3_PCI_MEM_1_START	0xd0000000
+#define	OCELOT_3_PCI_MEM_1_SIZE		0x10000000
+
+static struct resource mv_pci_io_mem0_resource = {
+	.name	= "MV64340 PCI0 IO MEM",
+	.start	= OCELOT_3_PCI_IO_0_START,
+	.end	= OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE - 1,
+	.flags  = IORESOURCE_IO,
+};
+
+static struct resource mv_pci_io_mem1_resource = {
+	.name	= "MV64340 PCI1 IO MEM",
+	.start	= OCELOT_3_PCI_IO_1_START,
+	.end	= OCELOT_3_PCI_IO_1_START + OCELOT_3_PCI_IO_1_SIZE - 1,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource mv_pci_mem0_resource = {
+	.name	= "MV64340 PCI0 MEM",
+	.start	= OCELOT_3_PCI_MEM_0_START,
+	.end	= OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource mv_pci_mem1_resource = {
+	.name	= "MV64340 PCI1 MEM",
+	.start	= OCELOT_3_PCI_MEM_1_START,
+	.end	= OCELOT_3_PCI_MEM_1_START + OCELOT_3_PCI_MEM_1_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct mv_pci_controller mv_bus0_controller = {
+	.pcic = {
+		 .pci_ops	= &mv_pci_ops,
+		 .mem_resource	= &mv_pci_mem0_resource,
+		 .io_resource	= &mv_pci_io_mem0_resource,
+	},
+	.config_addr	= MV64340_PCI_0_CONFIG_ADDR,
+	.config_vreg	= MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static struct mv_pci_controller mv_bus1_controller = {
+	.pcic = {
+		 .pci_ops	= &mv_pci_ops,
+		 .mem_resource	= &mv_pci_mem1_resource,
+		 .io_resource	= &mv_pci_io_mem1_resource,
+	},
+	.config_addr	= MV64340_PCI_1_CONFIG_ADDR,
+	.config_vreg	= MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static __init int __init ja_pci_init(void)
+{
+	uint32_t enable;
+	extern int pci_probe_only;
+
+	/* PMON will assign PCI resources */
+	pci_probe_only = 1;
+
+	enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
+	/*
+	 * We require at least one enabled I/O or PCI memory window or we
+	 * will ignore this PCI bus.  We ignore PCI windows 1, 2 and 3.
+	 */
+	if (enable & (0x01 <<  9) || enable & (0x01 << 10))
+		register_pci_controller(&mv_bus0_controller.pcic);
+
+	if (enable & (0x01 << 14) || enable & (0x01 << 15))
+		register_pci_controller(&mv_bus1_controller.pcic);
+
+	ioport_resource.end = OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE +
+					OCELOT_3_PCI_IO_1_SIZE - 1;
+
+	iomem_resource.end = OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE +
+					OCELOT_3_PCI_MEM_1_SIZE - 1;
+
+	set_io_port_base(OCELOT_3_PCI_IO_0_START); /* mips_io_port_base */
+
+	return 0;
+}
+
+arch_initcall(ja_pci_init);
+
+static int __init momenco_ocelot_3_setup(void)
+{
+	unsigned int tmpword;
+
+	board_time_init = momenco_time_init;
+
+	_machine_restart = momenco_ocelot_restart;
+	_machine_halt = momenco_ocelot_halt;
+	_machine_power_off = momenco_ocelot_power_off;
+
+	/* Wired TLB entries */
+	setup_wired_tlb_entries();
+
+	/* shut down ethernet ports, just to be sure our memory doesn't get
+	 * corrupted by random ethernet traffic.
+	 */
+	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+	do {}
+	  while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+	do {}
+	  while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+	do {}
+	  while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+	do {}
+	  while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
+		 MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
+		 MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+
+	/* Turn off the Bit-Error LED */
+	OCELOT_FPGA_WRITE(0x80, CLR);
+
+	tmpword = OCELOT_FPGA_READ(BOARDREV);
+	if (tmpword < 26)
+		printk("Momenco Ocelot-3: Board Assembly Rev. %c\n",
+			'A'+tmpword);
+	else
+		printk("Momenco Ocelot-3: Board Assembly Revision #0x%x\n",
+			tmpword);
+
+	tmpword = OCELOT_FPGA_READ(FPGA_REV);
+	printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
+	tmpword = OCELOT_FPGA_READ(RESET_STATUS);
+	printk("Reset reason: 0x%x\n", tmpword);
+	switch (tmpword) {
+		case 0x1:
+			printk("  - Power-up reset\n");
+			break;
+		case 0x2:
+			printk("  - Push-button reset\n");
+			break;
+		case 0x4:
+			printk("  - cPCI bus reset\n");
+			break;
+		case 0x8:
+			printk("  - Watchdog reset\n");
+			break;
+		case 0x10:
+			printk("  - Software reset\n");
+			break;
+		default:
+			printk("  - Unknown reset cause\n");
+	}
+	reset_reason = tmpword;
+	OCELOT_FPGA_WRITE(0xff, RESET_STATUS);
+
+	tmpword = OCELOT_FPGA_READ(CPCI_ID);
+	printk("cPCI ID register: 0x%02x\n", tmpword);
+	printk("  - Slot number: %d\n", tmpword & 0x1f);
+	printk("  - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no");
+	printk("  - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no");
+
+	tmpword = OCELOT_FPGA_READ(BOARD_STATUS);
+	printk("Board Status register: 0x%02x\n", tmpword);
+	printk("  - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
+	printk("  - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
+	printk("  - L3 cache size: %d MB\n", (1<<((tmpword&12) >> 2))&~1);
+
+	/* Support for 128 MB memory */
+	add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM);
+
+	return 0;
+}
+
+early_initcall(momenco_ocelot_3_setup);