MIPS: Refactor GIC clocksource code.

Reorganize some of the GIC clocksource driver code. Below is a list of
the various changes.

  * No longer select CSRC_GIC by default for Malta platform.
  * Limit choice for either the GIC or R4K clocksource, not both.
  * Change location in Makefile.
  * Created new 'gic_read_count' function in common 'irq-gic.c' file.
  * Change 'git_hpt_read' function in 'csrc-gic.c' to use new function.
  * Surround GIC specific code in Malta platform code with #ifdef's.
  * Only initialize the GIC clocksource if it was selected. Original
    code called it unconditionally if a GIC was found.

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>

1 files changed, 24 insertions, 13 deletions

diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index 381ad062f19..79e5169eabd 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -71,7 +71,9 @@ static void __init estimate_frequencies(void)
 {
 	unsigned long flags;
 	unsigned int count, start;
+#ifdef CONFIG_IRQ_GIC
 	unsigned int giccount = 0, gicstart = 0;
+#endif
 
 	local_irq_save(flags);
 
@@ -81,26 +83,32 @@ static void __init estimate_frequencies(void)
 
 	/* Initialize counters. */
 	start = read_c0_count();
+#ifdef CONFIG_IRQ_GIC
 	if (gic_present)
 		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), gicstart);
+#endif
 
 	/* Read counter exactly on falling edge of update flag. */
 	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
 	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 
 	count = read_c0_count();
+#ifdef CONFIG_IRQ_GIC
 	if (gic_present)
 		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), giccount);
+#endif
 
 	local_irq_restore(flags);
 
 	count -= start;
-	if (gic_present)
-		giccount -= gicstart;
-
 	mips_hpt_frequency = count;
-	if (gic_present)
+
+#ifdef CONFIG_IRQ_GIC
+	if (gic_present) {
+		giccount -= gicstart;
 		gic_frequency = giccount;
+	}
+#endif
 }
 
 void read_persistent_clock(struct timespec *ts)
@@ -156,24 +164,27 @@ void __init plat_time_init(void)
 	    (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
 		freq *= 2;
 	freq = freqround(freq, 5000);
-	pr_debug("CPU frequency %d.%02d MHz\n", freq/1000000,
+	printk("CPU frequency %d.%02d MHz\n", freq/1000000,
 	       (freq%1000000)*100/1000000);
 	cpu_khz = freq / 1000;
 
-	if (gic_present) {
-		freq = freqround(gic_frequency, 5000);
-		pr_debug("GIC frequency %d.%02d MHz\n", freq/1000000,
-		       (freq%1000000)*100/1000000);
-		gic_clocksource_init(gic_frequency);
-	} else
-		init_r4k_clocksource();
+	mips_scroll_message();
 
 #ifdef CONFIG_I8253
 	/* Only Malta has a PIT. */
 	setup_pit_timer();
 #endif
 
-	mips_scroll_message();
+#ifdef CONFIG_IRQ_GIC
+	if (gic_present) {
+		freq = freqround(gic_frequency, 5000);
+		printk("GIC frequency %d.%02d MHz\n", freq/1000000,
+		       (freq%1000000)*100/1000000);
+#ifdef CONFIG_CSRC_GIC
+		gic_clocksource_init(gic_frequency);
+#endif
+	}
+#endif
 
 	plat_perf_setup();
 }