MIPS: Netlogic: Platform NAND/NOR flash support

Changes to add support for the boot NOR flash on XLR boards and the
boot NAND/NOR flash drivers on the XLS boards.

Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com>
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3758/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2 files changed, 221 insertions, 1 deletions

diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
index f01e4d7a060..c287dea8757 100644
--- a/arch/mips/netlogic/xlr/Makefile
+++ b/arch/mips/netlogic/xlr/Makefile
@@ -1,2 +1,2 @@
-obj-y				+= setup.o platform.o
+obj-y				+= setup.o platform.o platform-flash.o
 obj-$(CONFIG_SMP)		+= wakeup.o
diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c
new file mode 100644
index 00000000000..340ab1601c4
--- /dev/null
+++ b/arch/mips/netlogic/xlr/platform-flash.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/resource.h>
+#include <linux/spi/flash.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/flash.h>
+#include <asm/netlogic/xlr/bridge.h>
+#include <asm/netlogic/xlr/gpio.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+/*
+ * Default NOR partition layout
+ */
+static struct mtd_partition xlr_nor_parts[] = {
+	{
+		.name = "User FS",
+		.offset = 0x800000,
+		.size   = MTDPART_SIZ_FULL,
+	}
+};
+
+/*
+ * Default NAND partition layout
+ */
+static struct mtd_partition xlr_nand_parts[] = {
+	{
+		.name	= "Root Filesystem",
+		.offset	= 64 * 64 * 2048,
+		.size	= 432 * 64 * 2048,
+	},
+	{
+		.name	= "Home Filesystem",
+		.offset	= MTDPART_OFS_APPEND,
+		.size   = MTDPART_SIZ_FULL,
+	},
+};
+
+/* Use PHYSMAP flash for NOR */
+struct physmap_flash_data xlr_nor_data = {
+	.width		= 2,
+	.parts		= xlr_nor_parts,
+	.nr_parts	= ARRAY_SIZE(xlr_nor_parts),
+};
+
+static struct resource xlr_nor_res[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device xlr_nor_dev = {
+	.name	= "physmap-flash",
+	.dev	= {
+		.platform_data	= &xlr_nor_data,
+	},
+	.num_resources  = ARRAY_SIZE(xlr_nor_res),
+	.resource       = xlr_nor_res,
+};
+
+const char *xlr_part_probes[] = { "cmdlinepart", NULL };
+
+/*
+ * Use "gen_nand" driver for NAND flash
+ *
+ * There seems to be no way to store a private pointer containing
+ * platform specific info in gen_nand drivier. We will use a global
+ * struct for now, since we currently have only one NAND chip per board.
+ */
+struct xlr_nand_flash_priv {
+	int cs;
+	uint64_t flash_mmio;
+};
+
+static struct xlr_nand_flash_priv nand_priv;
+
+static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd,
+		unsigned int ctrl)
+{
+	if (ctrl & NAND_CLE)
+		nlm_write_reg(nand_priv.flash_mmio,
+			FLASH_NAND_CLE(nand_priv.cs), cmd);
+	else if (ctrl & NAND_ALE)
+		nlm_write_reg(nand_priv.flash_mmio,
+			FLASH_NAND_ALE(nand_priv.cs), cmd);
+}
+
+struct platform_nand_data xlr_nand_data = {
+	.chip = {
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(xlr_nand_parts),
+		.chip_delay	= 50,
+		.partitions	= xlr_nand_parts,
+		.part_probe_types = xlr_part_probes,
+	},
+	.ctrl = {
+		.cmd_ctrl	= xlr_nand_ctrl,
+	},
+};
+
+static struct resource xlr_nand_res[] = {
+	{
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device xlr_nand_dev = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(xlr_nand_res),
+	.resource	= xlr_nand_res,
+	.dev		= {
+		.platform_data	= &xlr_nand_data,
+	}
+};
+
+/*
+ * XLR/XLS supports upto 8 devices on its FLASH interface. The value in
+ * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
+ * flash devices.
+ * Under this, each flash device has an offset and size given by the
+ * CSBASE_ADDR and CSBASE_MASK registers for the device.
+ *
+ * The CSBASE_ registers are expected to be setup by the bootloader.
+ */
+static void setup_flash_resource(uint64_t flash_mmio,
+	uint64_t flash_map_base, int cs, struct resource *res)
+{
+	u32 base, mask;
+
+	base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
+	mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));
+
+	res->start = flash_map_base + ((unsigned long)base << 16);
+	res->end = res->start + (mask + 1) * 64 * 1024;
+}
+
+static int __init xlr_flash_init(void)
+{
+	uint64_t gpio_mmio, flash_mmio, flash_map_base;
+	u32 gpio_resetcfg, flash_bar;
+	int cs, boot_nand, boot_nor;
+
+	/* Flash address bits 39:24 is in bridge flash BAR */
+	flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
+	flash_map_base = (flash_bar & 0xffff0000) << 8;
+
+	gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+	flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);
+
+	/* Get the chip reset config */
+	gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);
+
+	/* Check for boot flash type */
+	boot_nor = boot_nand = 0;
+	if (nlm_chip_is_xls()) {
+		/* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
+		if (gpio_resetcfg & (1 << 16))
+			boot_nand = 1;
+
+		/* check boot from PCMCIA, (GPIO reset reg bit 15 */
+		if ((gpio_resetcfg & (1 << 15)) == 0)
+			boot_nor = 1;	/* not set, booted from NOR */
+	} else { /* XLR */
+		/* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
+		if ((gpio_resetcfg & (1 << 16)) == 0)
+			boot_nor = 1;	/* not set, booted from NOR */
+	}
+
+	/* boot flash at chip select 0 */
+	cs = 0;
+
+	if (boot_nand) {
+		nand_priv.cs = cs;
+		nand_priv.flash_mmio = flash_mmio;
+		setup_flash_resource(flash_mmio, flash_map_base, cs,
+			 xlr_nand_res);
+
+		/* Initialize NAND flash at CS 0 */
+		nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
+				FLASH_NAND_CSDEV_PARAM);
+		nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
+				FLASH_NAND_CSTIME_PARAMA);
+		nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
+				FLASH_NAND_CSTIME_PARAMB);
+
+		pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
+		return platform_device_register(&xlr_nand_dev);
+	}
+
+	if (boot_nor) {
+		setup_flash_resource(flash_mmio, flash_map_base, cs,
+			xlr_nor_res);
+		pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
+		return platform_device_register(&xlr_nor_dev);
+	}
+	return 0;
+}
+
+arch_initcall(xlr_flash_init);