summaryrefslogtreecommitdiffstats
path: root/arch/mips/pmc-sierra
diff options
context:
space:
mode:
authorJason Wessel <jason.wessel@windriver.com>2008-07-29 15:58:52 -0500
committerRalf Baechle <ralf@linux-mips.org>2008-07-30 21:54:42 +0100
commit8d60a903d986ffa26c41f0092320a3b9da20bfaf (patch)
treef05a8ae48e275d55fcfd3acfb7b3b1b601da56ea /arch/mips/pmc-sierra
parent8f8da9adebdf04bfb3b812a7de8706fbf179fd2c (diff)
[MIPS] kgdb: Remove existing implementation
This patch explicitly removes the kgdb implementation, for mips which is intended to be followed by a patch that adds a kgdb implementation for MIPS that makes use of the kgdb core in the kernel. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/pmc-sierra')
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_serial.c73
-rw-r--r--arch/mips/pmc-sierra/yosemite/Makefile1
-rw-r--r--arch/mips/pmc-sierra/yosemite/dbg_io.c180
-rw-r--r--arch/mips/pmc-sierra/yosemite/irq.c9
4 files changed, 0 insertions, 263 deletions
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index 9de34302e5f..f7261628d8a 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -38,68 +38,6 @@
#include <msp_int.h>
#include <msp_regs.h>
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
- volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
- uint32_t val = (uint32_t)c;
-
- local_irq_disable();
- while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
- uart[0] = val;
- while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
- local_irq_enable();
-
- return 1;
-}
-
-char getDebugChar(void)
-{
- volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
- uint32_t val;
-
- while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
- val = uart[0];
-
- return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
- unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
- /* Enable FIFOs */
- writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
- UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
- (char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
- /* Select brtc divisor */
- writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
- /* Store divisor lsb */
- writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
- /* Store divisor msb */
- writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
- /* Set 8N1 mode */
- writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
- /* Disable flow control */
- writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
- /* Disable receive interrupt(!) */
- writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
void __init msp_serial_setup(void)
{
char *s;
@@ -139,17 +77,6 @@ void __init msp_serial_setup(void)
case MACH_MSP7120_FPGA:
/* Enable UART1 on MSP4200 and MSP7120 */
*GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
- /* Initialize UART1 for kgdb since PMON doesn't */
- if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
- if( mips_machtype == MACH_MSP4200_FPGA
- || mips_machtype == MACH_MSP7120_FPGA )
- initDebugPort(uartclk, 19200);
- else
- initDebugPort(uartclk, 57600);
- }
-#endif
break;
default:
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index 8fd9a04e353..b16f95c3df6 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -4,7 +4,6 @@
obj-y += irq.o prom.o py-console.o setup.o
-obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_SMP) += smp.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c
deleted file mode 100644
index 6362c702e38..00000000000
--- a/arch/mips/pmc-sierra/yosemite/dbg_io.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define YOSEMITE_BAUD_2400 2400
-#define YOSEMITE_BAUD_4800 4800
-#define YOSEMITE_BAUD_9600 9600
-#define YOSEMITE_BAUD_19200 19200
-#define YOSEMITE_BAUD_38400 38400
-#define YOSEMITE_BAUD_57600 57600
-#define YOSEMITE_BAUD_115200 115200
-
-#define YOSEMITE_PARITY_NONE 0
-#define YOSEMITE_PARITY_ODD 0x08
-#define YOSEMITE_PARITY_EVEN 0x18
-#define YOSEMITE_PARITY_MARK 0x28
-#define YOSEMITE_PARITY_SPACE 0x38
-
-#define YOSEMITE_DATA_5BIT 0x0
-#define YOSEMITE_DATA_6BIT 0x1
-#define YOSEMITE_DATA_7BIT 0x2
-#define YOSEMITE_DATA_8BIT 0x3
-
-#define YOSEMITE_STOP_1BIT 0x0
-#define YOSEMITE_STOP_2BIT 0x4
-
-/* This is crucial */
-#define SERIAL_REG_OFS 0x1
-
-#define SERIAL_RCV_BUFFER 0x0
-#define SERIAL_TRANS_HOLD 0x0
-#define SERIAL_SEND_BUFFER 0x0
-#define SERIAL_INTR_ENABLE (1 * SERIAL_REG_OFS)
-#define SERIAL_INTR_ID (2 * SERIAL_REG_OFS)
-#define SERIAL_DATA_FORMAT (3 * SERIAL_REG_OFS)
-#define SERIAL_LINE_CONTROL (3 * SERIAL_REG_OFS)
-#define SERIAL_MODEM_CONTROL (4 * SERIAL_REG_OFS)
-#define SERIAL_RS232_OUTPUT (4 * SERIAL_REG_OFS)
-#define SERIAL_LINE_STATUS (5 * SERIAL_REG_OFS)
-#define SERIAL_MODEM_STATUS (6 * SERIAL_REG_OFS)
-#define SERIAL_RS232_INPUT (6 * SERIAL_REG_OFS)
-#define SERIAL_SCRATCH_PAD (7 * SERIAL_REG_OFS)
-
-#define SERIAL_DIVISOR_LSB (0 * SERIAL_REG_OFS)
-#define SERIAL_DIVISOR_MSB (1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define SERIAL_READ(ofs) (*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE + ofs)))
-
-#define SERIAL_WRITE(ofs, val) ((*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define SERIAL_READ_1(ofs) (*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE_1 + ofs)))
-
-#define SERIAL_WRITE_1(ofs, val) ((*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
- /* Disable Interrupts */
- SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
- SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
- {
- unsigned int divisor;
-
- SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
- divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
- SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
- SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
- (divisor & 0xff00) >> 8);
- SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
- }
-
- SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
- YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
- /* Enable Interrupts */
- SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
- unsigned char stop)
-{
- /* Disable Interrupts */
- SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
- SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
- {
- unsigned int divisor;
-
- SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
- divisor = TITAN_SERIAL_BASE_BAUD / baud;
- SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
- SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
- SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
- }
-
- SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(YOSEMITE_BAUD_115200,
- YOSEMITE_DATA_8BIT,
- YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
- }
-
- while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
- return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(YOSEMITE_BAUD_115200,
- YOSEMITE_DATA_8BIT,
- YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
- }
-
- while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
- SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
- return 1;
-}
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 4decc280786..5f673eba142 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void)
}
}
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
/*
* Initialize the next level interrupt handler
*/
@@ -156,11 +152,6 @@ void __init arch_init_irq(void)
rm7k_cpu_irq_init();
rm9k_cpu_irq_init();
-#ifdef CONFIG_KGDB
- /* At this point, initialize the second serial port */
- init_second_port();
-#endif
-
#ifdef CONFIG_GDB_CONSOLE
register_gdb_console();
#endif