MIPS: Alchemy: Clean up GPIO registers and accessors

remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register
addresses and fix the fallout in all boards and drivers.

This also fixes a bug in the mtx-1_wdt driver which was introduced by
commit 6ea8115bb6f359df4f45152f2b40e1d4d1891392
("Convert mtx1 wdt to be a platform device and use generic GPIO API")
before this patch mtx-1_wdt only modified GPIO215, the patch then
used the gpio resource information as bit index into the GPIO2 register
but the conversion to the GPIO API didn't realize that.
With this patch the drivers original behaviour is restored and GPIO15
is left alone.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Florian Fainelli <florian@openwrt.org>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Patchwork: https://patchwork.linux-mips.org/patch/2381/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org

6 files changed, 56 insertions, 52 deletions

diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 2d85c4b5be0..e64fdcbf75d 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -65,7 +65,7 @@ void __init board_setup(void)
 
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
-	au_writel(0, SYS_PINSTATERD);
+	alchemy_gpio1_input_enable();
 	udelay(100);
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 83f46215eb0..3b4fa320696 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -56,7 +56,7 @@ void __init board_setup(void)
 	sys_clksrc = sys_freqctrl = pin_func = 0;
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
-	au_writel(0, SYS_PINSTATERD);
+	alchemy_gpio1_input_enable();
 	udelay(100);
 
 	/* GPIO201 is input for PCMCIA card detect */
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index cf436ab679a..3ae984cf98c 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -87,7 +87,7 @@ void __init board_setup(void)
 	au_writel(SYS_PF_NI2, SYS_PINFUNC);
 
 	/* Initialize GPIO */
-	au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+	au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
 	alchemy_gpio_direction_output(0, 0);	/* Disable M66EN (PCI 66MHz) */
 	alchemy_gpio_direction_output(3, 1);	/* Disable PCI CLKRUN# */
 	alchemy_gpio_direction_output(1, 1);	/* Enable EXT_IO3 */
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 956f946218c..55628e390fd 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -53,8 +53,8 @@ static struct platform_device mtx1_button = {
 
 static struct resource mtx1_wdt_res[] = {
 	[0] = {
-		.start	= 15,
-		.end	= 15,
+		.start	= 215,
+		.end	= 215,
 		.name	= "mtx1-wdt-gpio",
 		.flags	= IORESOURCE_IRQ,
 	}
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 2dfff4f2651..f260ebed713 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -702,7 +702,9 @@ enum soc_au1200_ints {
 #define AU1000_UART1_PHYS_ADDR		0x11200000 /* 0234 */
 #define AU1000_UART2_PHYS_ADDR		0x11300000 /* 0 */
 #define AU1000_UART3_PHYS_ADDR		0x11400000 /* 0123 */
+#define AU1500_GPIO2_PHYS_ADDR		0x11700000 /* 1234 */
 #define AU1000_IC1_PHYS_ADDR		0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR		0x11900000 /* 01234 */
 #define AU1000_DMA_PHYS_ADDR		0x14002000 /* 012 */
 #define AU1550_DBDMA_PHYS_ADDR		0x14002000 /* 34 */
 #define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 34 */
@@ -717,7 +719,6 @@ enum soc_au1200_ints {
 #define	IRDA_PHYS_ADDR		0x10300000
 #define	SSI0_PHYS_ADDR		0x11600000
 #define	SSI1_PHYS_ADDR		0x11680000
-#define	SYS_PHYS_ADDR		0x11900000
 #define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
 #define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
 #define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
@@ -730,8 +731,6 @@ enum soc_au1200_ints {
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
 #define	USBH_PHYS_ADDR		0x10100000
 #define PCI_PHYS_ADDR		0x14005000
-#define GPIO2_PHYS_ADDR		0x11700000
-#define	SYS_PHYS_ADDR		0x11900000
 #define PCI_MEM_PHYS_ADDR	0x400000000ULL
 #define PCI_IO_PHYS_ADDR	0x500000000ULL
 #define PCI_CONFIG0_PHYS_ADDR	0x600000000ULL
@@ -750,8 +749,6 @@ enum soc_au1200_ints {
 #define	IRDA_PHYS_ADDR		0x10300000
 #define	SSI0_PHYS_ADDR		0x11600000
 #define	SSI1_PHYS_ADDR		0x11680000
-#define GPIO2_PHYS_ADDR		0x11700000
-#define	SYS_PHYS_ADDR		0x11900000
 #define LCD_PHYS_ADDR		0x15000000
 #define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
 #define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
@@ -765,8 +762,6 @@ enum soc_au1200_ints {
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
 #define	USBH_PHYS_ADDR		0x14020000
 #define PCI_PHYS_ADDR		0x14005000
-#define GPIO2_PHYS_ADDR		0x11700000
-#define	SYS_PHYS_ADDR		0x11900000
 #define PE_PHYS_ADDR		0x14008000
 #define PSC0_PHYS_ADDR		0x11A00000
 #define PSC1_PHYS_ADDR		0x11B00000
@@ -790,8 +785,6 @@ enum soc_au1200_ints {
 #define CIM_PHYS_ADDR		0x14004000
 #define USBM_PHYS_ADDR		0x14020000
 #define	USBH_PHYS_ADDR		0x14020100
-#define GPIO2_PHYS_ADDR		0x11700000
-#define	SYS_PHYS_ADDR		0x11900000
 #define PSC0_PHYS_ADDR	 	0x11A00000
 #define PSC1_PHYS_ADDR	 	0x11B00000
 #define LCD_PHYS_ADDR		0x15000000
@@ -1359,22 +1352,6 @@ enum soc_au1200_ints {
 #define SYS_PINFUNC_S1B 	(1 << 2)
 #endif
 
-#define SYS_TRIOUTRD		0xB1900100
-#define SYS_TRIOUTCLR		0xB1900100
-#define SYS_OUTPUTRD		0xB1900108
-#define SYS_OUTPUTSET		0xB1900108
-#define SYS_OUTPUTCLR		0xB190010C
-#define SYS_PINSTATERD		0xB1900110
-#define SYS_PININPUTEN		0xB1900110
-
-/* GPIO2, Au1500, Au1550 only */
-#define GPIO2_BASE		0xB1700000
-#define GPIO2_DIR		(GPIO2_BASE + 0)
-#define GPIO2_OUTPUT		(GPIO2_BASE + 8)
-#define GPIO2_PINSTATE		(GPIO2_BASE + 0xC)
-#define GPIO2_INTENABLE 	(GPIO2_BASE + 0x10)
-#define GPIO2_ENABLE		(GPIO2_BASE + 0x14)
-
 /* Power Management */
 #define SYS_SCRATCH0		0xB1900018
 #define SYS_SCRATCH1		0xB190001C
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 8f8c1c55593..1f41a522906 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -24,6 +24,22 @@
 
 #define MAKE_IRQ(intc, off)	(AU1000_INTC##intc##_INT_BASE + (off))
 
+/* GPIO1 registers within SYS_ area */
+#define SYS_TRIOUTRD		0x100
+#define SYS_TRIOUTCLR		0x100
+#define SYS_OUTPUTRD		0x108
+#define SYS_OUTPUTSET		0x108
+#define SYS_OUTPUTCLR		0x10C
+#define SYS_PINSTATERD		0x110
+#define SYS_PININPUTEN		0x110
+
+/* register offsets within GPIO2 block */
+#define GPIO2_DIR		0x00
+#define GPIO2_OUTPUT		0x08
+#define GPIO2_PINSTATE		0x0C
+#define GPIO2_INTENABLE		0x10
+#define GPIO2_ENABLE		0x14
+
 struct gpio;
 
 static inline int au1000_gpio1_to_irq(int gpio)
@@ -201,23 +217,26 @@ static inline int au1200_irq_to_gpio(int irq)
  */
 static inline void alchemy_gpio1_set_value(int gpio, int v)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
 	unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR;
-	au_writel(mask, r);
-	au_sync();
+	__raw_writel(mask, base + r);
+	wmb();
 }
 
 static inline int alchemy_gpio1_get_value(int gpio)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
-	return au_readl(SYS_PINSTATERD) & mask;
+	return __raw_readl(base + SYS_PINSTATERD) & mask;
 }
 
 static inline int alchemy_gpio1_direction_input(int gpio)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
-	au_writel(mask, SYS_TRIOUTCLR);
-	au_sync();
+	__raw_writel(mask, base + SYS_TRIOUTCLR);
+	wmb();
 	return 0;
 }
 
@@ -258,27 +277,31 @@ static inline int alchemy_gpio1_to_irq(int gpio)
  */
 static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
-	unsigned long d = au_readl(GPIO2_DIR);
+	unsigned long d = __raw_readl(base + GPIO2_DIR);
+
 	if (to_out)
 		d |= mask;
 	else
 		d &= ~mask;
-	au_writel(d, GPIO2_DIR);
-	au_sync();
+	__raw_writel(d, base + GPIO2_DIR);
+	wmb();
 }
 
 static inline void alchemy_gpio2_set_value(int gpio, int v)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
 	unsigned long mask;
 	mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
-	au_writel(mask, GPIO2_OUTPUT);
-	au_sync();
+	__raw_writel(mask, base + GPIO2_OUTPUT);
+	wmb();
 }
 
 static inline int alchemy_gpio2_get_value(int gpio)
 {
-	return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
 }
 
 static inline int alchemy_gpio2_direction_input(int gpio)
@@ -330,21 +353,23 @@ static inline int alchemy_gpio2_to_irq(int gpio)
  */
 static inline void alchemy_gpio1_input_enable(void)
 {
-	au_writel(0, SYS_PININPUTEN);	/* the write op is key */
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+	__raw_writel(0, base + SYS_PININPUTEN);	/* the write op is key */
+	wmb();
 }
 
 /* GPIO2 shared interrupts and control */
 
 static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
 {
-	unsigned long r = au_readl(GPIO2_INTENABLE);
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	unsigned long r = __raw_readl(base + GPIO2_INTENABLE);
 	if (en)
 		r |= 1 << gpio2;
 	else
 		r &= ~(1 << gpio2);
-	au_writel(r, GPIO2_INTENABLE);
-	au_sync();
+	__raw_writel(r, base + GPIO2_INTENABLE);
+	wmb();
 }
 
 /**
@@ -419,10 +444,11 @@ static inline void alchemy_gpio2_disable_int(int gpio2)
  */
 static inline void alchemy_gpio2_enable(void)
 {
-	au_writel(3, GPIO2_ENABLE);	/* reset, clock enabled */
-	au_sync();
-	au_writel(1, GPIO2_ENABLE);	/* clock enabled */
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(3, base + GPIO2_ENABLE);	/* reset, clock enabled */
+	wmb();
+	__raw_writel(1, base + GPIO2_ENABLE);	/* clock enabled */
+	wmb();
 }
 
 /**
@@ -432,8 +458,9 @@ static inline void alchemy_gpio2_enable(void)
  */
 static inline void alchemy_gpio2_disable(void)
 {
-	au_writel(2, GPIO2_ENABLE);	/* reset, clock disabled */
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(2, base + GPIO2_ENABLE);	/* reset, clock disabled */
+	wmb();
 }
 
 /**********************************************************************/