powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes

Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 84 insertions, 72 deletions

diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index df774a7088f..804e9035329 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -142,129 +142,141 @@
 			};
 		};
 
-		mdio@24520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
-
-			phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <5 1>;
-				reg = <0x0>;
-				device_type = "ethernet-phy";
-			};
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&mpic>;
-				interrupts = <5 1>;
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-			phy2: ethernet-phy@2 {
-				interrupt-parent = <&mpic>;
-				interrupts = <5 1>;
-				reg = <0x2>;
-				device_type = "ethernet-phy";
-			};
-			phy3: ethernet-phy@3 {
-				interrupt-parent = <&mpic>;
-				interrupts = <5 1>;
-				reg = <0x3>;
-				device_type = "ethernet-phy";
-			};
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@25520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-tbi";
-			reg = <0x25520 0x20>;
-
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@26520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-tbi";
-			reg = <0x26520 0x20>;
-
-			tbi2: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@27520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-tbi";
-			reg = <0x27520 0x20>;
-
-			tbi3: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
 		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x0>;
+					device_type = "ethernet-phy";
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x1>;
+					device_type = "ethernet-phy";
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			cell-index = <1>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 /* eTSEC 3/4 are currently broken
 		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			cell-index = <2>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			cell-index = <3>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
 			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
  */