Merge branch 'master'; commit 'v2.6.38-rc7' into next

17 files changed, 562 insertions, 1556 deletions

diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts
index 9bb3d72c0e5..2a56a0dbd1f 100644
--- a/arch/powerpc/boot/dts/bluestone.dts
+++ b/arch/powerpc/boot/dts/bluestone.dts
@@ -33,7 +33,7 @@
 	aliases {
 		ethernet0 = &EMAC0;
 		serial0 = &UART0;
-		serial1 = &UART1;
+		//serial1 = &UART1; --gcl missing UART1 label
 	};
 
 	cpus {
@@ -52,7 +52,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
-			next-level-cache = <&L2C0>;
+			//next-level-cache = <&L2C0>; --gcl missing L2C0 label
 		};
 	};
 
@@ -142,7 +142,7 @@
 					/*RXEOB*/ 0x7 0x4
 					/*SERR*/  0x3 0x4
 					/*TXDE*/  0x4 0x4
-					/*RXDE*/  0x5 0x4
+					/*RXDE*/  0x5 0x4>;
 		};
 
 		POB0: opb {
@@ -182,7 +182,7 @@
 						reg = <0x001a0000 0x00060000>;
 					};
 				};
-			}
+			};
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index a3037039625..5b27a4b74b7 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -105,6 +105,15 @@
 		dcr-reg = <0x00c 0x002>;
 	};
 
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x160 0x003>;
+		unused-units = <0x00000100>;
+		idle-doze = <0x02000000>;
+		standby = <0xfeff791d>;
+	};
+
 	L2C0: l2c {
 		compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
 		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
@@ -270,28 +279,6 @@
 				interrupts = <0x1 0x4>;
 			};
 
-			UART2: serial@ef600500 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600500 0x00000008>;
-				virtual-reg = <0xef600500>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC1>;
-				interrupts = <28 0x4>;
-			};
-
-			UART3: serial@ef600600 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600600 0x00000008>;
-				virtual-reg = <0xef600600>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC1>;
-				interrupts = <29 0x4>;
-			};
-
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-460ex", "ibm,iic";
 				reg = <0xef600700 0x00000014>;
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index dd3860846f1..ad3a4f4a2b0 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -10,220 +10,74 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "schindler,cm5200";
 	compatible = "schindler,cm5200";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;		// L1, 16K
-			i-cache-size = <0x4000>;		// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-		};
-
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
+		can@900 {
+			status = "disabled";
 		};
 
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
+		can@980 {
+			status = "disabled";
 		};
 
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 		};
 
-		serial@2000 {		// PSC1
+		psc@2400 {		// PSC3
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
-		serial@2200 {		// PSC2
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
+		psc@2600 {		// PSC4
+			status = "disabled";
 		};
 
-		serial@2400 {		// PSC3
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
+		psc@2800 {		// PSC5
+			status = "disabled";
 		};
 
-		serial@2c00 {		// PSC6
+		psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
 		};
 
 		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
 			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
+		ata@3a00 {
+			status = "disabled";
 		};
 
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
+		i2c@3d00 {
+			status = "disabled";
 		};
+
 	};
 
-	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xfc000000 0x2000000>;
+	pci@f0000d00 {
+		status = "disabled";
+	};
 
+	localbus {
 		// 16-bit flash device at LocalPlus Bus CS0
 		flash@0,0 {
 			compatible = "cfi-flash";
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 8e9be6bfe23..27bd267d631 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -11,195 +11,68 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "intercontrol,digsy-mtc";
 	compatible = "intercontrol,digsy-mtc";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;		// L1, 16K
-			i-cache-size = <0x4000>;		// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
 
 	memory {
-		device_type = "memory";
 		reg = <0x00000000 0x02000000>;	// 32MB
 	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
+		rtc@800 {
+			status = "disabled";
 		};
 
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
+		can@900 {
+			status = "disabled";
 		};
 
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
+		can@980 {
+			status = "disabled";
 		};
 
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		psc@2000 {		// PSC1
+			status = "disabled";
 		};
 
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		psc@2200 {		// PSC2
+			status = "disabled";
 		};
 
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
+		psc@2400 {		// PSC3
+			status = "disabled";
 		};
 
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 		};
 
-		serial@2600 {		// PSC4
+		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2600 0x100>;
-			interrupts = <2 11 0>;
 		};
 
-		serial@2800 {		// PSC5
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2800 0x100>;
-			interrupts = <2 12 0>;
+		psc@2c00 {		// PSC6
+			status = "disabled";
 		};
 
 		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
 			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
 		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-
 			rtc@50 {
 				compatible = "at,24c08";
 				reg = <0x50>;
@@ -211,16 +84,16 @@
 			};
 		};
 
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
+		i2c@3d40 {
+			status = "disabled";
 		};
 	};
 
-	lpb {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
+	localbus {
 		ranges = <0 0 0xff000000 0x1000000>;
 
 		// 16-bit flash device at LocalPlus Bus CS0
diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts
index cad9c3840af..71d3bb4931d 100644
--- a/arch/powerpc/boot/dts/hotfoot.dts
+++ b/arch/powerpc/boot/dts/hotfoot.dts
@@ -117,6 +117,8 @@
 			};
 
 			IIC: i2c@ef600500 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "ibm,iic-405ep", "ibm,iic";
 				reg = <0xef600500 0x00000011>;
 				interrupt-parent = <&UIC0>;
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 083e68eeaca..89edb16649c 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -82,6 +82,15 @@
 		interrupt-parent = <&UIC0>;
 	};
 
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x0b0 0x003>;
+		unused-units = <0x00000000>;
+		idle-doze = <0x02000000>;
+		standby = <0xe3e74800>;
+	};
+
 	plb {
 		compatible = "ibm,plb-405ex", "ibm,plb4";
 		#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 59702ace900..fb288bb882b 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -10,256 +10,75 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "fsl,lite5200b";
 	compatible = "fsl,lite5200b";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
 
 	memory {
-		device_type = "memory";
 		reg = <0x00000000 0x10000000>;	// 256MB
 	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-		};
-
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			cell-index = <0>;
 		};
 
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
+		psc@2200 {		// PSC2
+			status = "disabled";
 		};
 
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
+		psc@2400 {		// PSC3
+			status = "disabled";
 		};
 
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		psc@2600 {		// PSC4
+			status = "disabled";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		psc@2800 {		// PSC5
+			status = "disabled";
 		};
 
-		serial@2000 {		// PSC1
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <0>;
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
+		psc@2c00 {		// PSC6
+			status = "disabled";
 		};
 
 		// PSC2 in ac97 mode example
 		//ac97@2200 {		// PSC2
 		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 		//	cell-index = <1>;
-		//	reg = <0x2200 0x100>;
-		//	interrupts = <2 2 0>;
 		//};
 
 		// PSC3 in CODEC mode example
 		//i2s@2400 {		// PSC3
 		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
 		//	cell-index = <2>;
-		//	reg = <0x2400 0x100>;
-		//	interrupts = <2 3 0>;
-		//};
-
-		// PSC4 in uart mode example
-		//serial@2600 {		// PSC4
-		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		//	cell-index = <3>;
-		//	reg = <0x2600 0x100>;
-		//	interrupts = <2 11 0>;
-		//};
-
-		// PSC5 in uart mode example
-		//serial@2800 {		// PSC5
-		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		//	cell-index = <4>;
-		//	reg = <0x2800 0x100>;
-		//	interrupts = <2 12 0>;
 		//};
 
 		// PSC6 in spi mode example
 		//spi@2c00 {		// PSC6
 		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 		//	cell-index = <5>;
-		//	reg = <0x2c00 0x100>;
-		//	interrupts = <2 4 0>;
 		//};
 
 		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
 			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-
 			eeprom@50 {
 				compatible = "atmel,24c02";
 				reg = <0x50>;
@@ -273,12 +92,6 @@
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 				 0xc000 0 0 2 &mpc5200_pic 1 1 3
@@ -298,11 +111,6 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = <0 0 0xfe000000 0x02000000>;
 
 		flash@0,0 {
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 0c3902bc5b6..48d72f38e5e 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -11,14 +11,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "fsl,media5200";
 	compatible = "fsl,media5200";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
 
 	aliases {
 		console = &console;
@@ -30,16 +27,7 @@
 	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;		// L1, 16K
-			i-cache-size = <0x4000>;		// L1, 16K
 			timebase-frequency = <33000000>;	// 33 MHz, these were configured by U-Boot
 			bus-frequency = <132000000>;		// 132 MHz
 			clock-frequency = <396000000>;		// 396 MHz
@@ -47,205 +35,57 @@
 	};
 
 	memory {
-		device_type = "memory";
 		reg = <0x00000000 0x08000000>;	// 128MB RAM
 	};
 
-	soc@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
+	soc5200@f0000000 {
 		bus-frequency = <132000000>;// 132 MHz
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
 
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-		};
-
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
+		psc@2000 {	// PSC1
+			status = "disabled";
 		};
 
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
+		psc@2200 {	// PSC2
+			status = "disabled";
 		};
 
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		psc@2400 {	// PSC3
+			status = "disabled";
 		};
 
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		psc@2600 {	// PSC4
+			status = "disabled";
 		};
 
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0x100>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		psc@2800 {	// PSC5
+			status = "disabled";
 		};
 
 		// PSC6 in uart mode
-		console: serial@2c00 {		// PSC6
+		console: psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <5>;
-			port-number = <0>;  // Logical port assignment
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
 		};
 
-		eth0: ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
+		ethernet@3000 {
 			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
-		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
+		usb@1000 {
+			reg = <0x1000 0x100>;
 		};
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
 				 0xc000 0 0 2 &media5200_fpga 0 3
@@ -262,37 +102,29 @@
 
 				 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
 				>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		interrupt-parent = <&mpc5200_pic>;
-		bus-range = <0 0>;
 		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+		interrupt-parent = <&mpc5200_pic>;
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = < 0 0 0xfc000000 0x02000000
 			   1 0 0xfe000000 0x02000000
 			   2 0 0xf0010000 0x00010000
 			   3 0 0xf0020000 0x00010000 >;
-
 		flash@0,0 {
 			compatible = "amd,am29lv28ml", "cfi-flash";
-			reg = <0 0x0 0x2000000>;		// 32 MB
-			bank-width = <4>;			// Width in bytes of the flash bank
-			device-width = <2>;			// Two devices on each bank
+			reg = <0 0x0 0x2000000>;                // 32 MB
+			bank-width = <4>;                       // Width in bytes of the flash bank
+			device-width = <2>;                     // Two devices on each bank
 		};
 
 		flash@1,0 {
 			compatible = "amd,am29lv28ml", "cfi-flash";
-			reg = <1 0 0x2000000>;			// 32 MB
-			bank-width = <4>;			// Width in bytes of the flash bank
-			device-width = <2>;			// Two devices on each bank
+			reg = <1 0 0x2000000>;                  // 32 MB
+			bank-width = <4>;                       // Width in bytes of the flash bank
+			device-width = <2>;                     // Two devices on each bank
 		};
 
 		media5200_fpga: fpga@2,0 {
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 6ca4fc144a3..0b78e89ac69 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -10,219 +10,73 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "promess,motionpro";
 	compatible = "promess,motionpro";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
-		motionpro-led@660 {	// Motion-PRO status LED
+		timer@660 {	// Motion-PRO status LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-statusled";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
 			blink-delay = <100>; // 100 msec
 		};
 
-		motionpro-led@670 {	// Motion-PRO ready LED
+		timer@670 {	// Motion-PRO ready LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-readyled";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
 		};
 
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		can@900 {
+			status = "disabled";
 		};
 
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 		};
 
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
+		// PSC2 in spi master mode 
+		psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+			cell-index = <1>;
 		};
 
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		psc@2400 {		// PSC3
+			status = "disabled";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		psc@2600 {		// PSC4
+			status = "disabled";
 		};
 
-		serial@2000 {		// PSC1
+		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
-		};
-
-		// PSC2 in spi master mode 
-		spi@2200 {		// PSC2
-			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
-			cell-index = <1>;
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
 		};
 
-		// PSC5 in uart mode
-		serial@2800 {		// PSC5
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2800 0x100>;
-			interrupts = <2 12 0>;
+		psc@2c00 {		// PSC6
+			status = "disabled";
 		};
 
 		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
 			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@2 {
 				reg = <2>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
+		i2c@3d00 {
+			status = "disabled";
 		};
 
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
@@ -235,10 +89,11 @@
 		};
 	};
 
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
 		ranges = <0 0 0xff000000 0x01000000
 			  1 0 0x50000000 0x00010000
 			  2 0 0x50010000 0x00010000
@@ -280,5 +135,6 @@
 			#size-cells = <1>;
 			#address-cells = <1>;
 		};
+
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
new file mode 100644
index 00000000000..bc27548e895
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -0,0 +1,275 @@
+/*
+ * base MPC5200b Device Tree Source
+ *
+ * Copyright (C) 2010 SecretLab
+ * Grant Likely <grant@secretlab.ca>
+ * John Bonesio <bones@secretlab.ca>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc5200b";
+	compatible = "fsl,mpc5200b";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		powerpc: PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory: memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc: soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+		};
+
+		timer@610 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+		};
+
+		timer@620 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+		};
+
+		timer@630 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+		};
+
+		timer@640 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+		};
+
+		timer@650 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+		};
+
+		timer@660 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+		};
+
+		timer@670 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+			reg = <0x800 0x100>;
+			interrupts = <1 5 0 1 6 0>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+		};
+
+		usb: usb@1000 {
+			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		psc1: psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc2: psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc3: psc@2400 {		// PSC3
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc4: psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2600 0x100>;
+			interrupts = <2 11 0>;
+		};
+
+		psc5: psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2800 0x100>;
+			interrupts = <2 12 0>;
+		};
+
+		psc6: psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		eth0: ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci: pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		// interrupt-map-mask = need to add
+		// interrupt-map = need to add
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		// ranges = need to add
+	};
+
+	localbus: localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x2000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts
index 05a76ccfd49..697b3f6b78b 100644
--- a/arch/powerpc/boot/dts/mpc8308_p1m.dts
+++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts
@@ -297,6 +297,14 @@
 			interrupt-parent = < &ipic >;
 		};
 
+		dma@2c000 {
+			compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
+			reg = <0x2c000 0x1800>;
+			interrupts = <3 0x8
+					94 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
 	};
 
 	pci0: pcie@e0009000 {
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts
index a97eb2db5a1..a0bd1881081 100644
--- a/arch/powerpc/boot/dts/mpc8308rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8308rdb.dts
@@ -109,7 +109,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		compatible = "fsl,mpc8315-immr", "simple-bus";
+		compatible = "fsl,mpc8308-immr", "simple-bus";
 		ranges = <0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
@@ -265,6 +265,14 @@
 			interrupt-parent = < &ipic >;
 		};
 
+		dma@2c000 {
+			compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
+			reg = <0x2c000 0x1800>;
+			interrupts = <3 0x8
+					94 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
 	};
 
 	pci0: pcie@e0009000 {
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
index b72a7581d79..21d34720fcc 100644
--- a/arch/powerpc/boot/dts/mucmc52.dts
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -11,172 +11,109 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "manroland,mucmc52";
 	compatible = "manroland,mucmc52";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		gpt0: timer@600 {	// GPT 0 in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		timer@640 {
+			status = "disabled";
 		};
 
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		timer@650 {
+			status = "disabled";
+		};
+
+		timer@660 {
+			status = "disabled";
+		};
+
+		timer@670 {
+			status = "disabled";
 		};
 
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		rtc@800 {
+			status = "disabled";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		can@900 {
+			status = "disabled";
 		};
 
-		serial@2000 { /* PSC1 in UART mode */
+		can@980 {
+			status = "disabled";
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		usb@1000 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
-		serial@2200 { /* PSC2 in UART mode */
+		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
 		};
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
 		};
 
 		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
 			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>; 	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>; 	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				compatible = "intel,lxt971";
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
+		i2c@3d00 {
+			status = "disabled";
 		};
 
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
 			hwmon@2c {
 				compatible = "ad,adm9240";
 				reg = <0x2c>;
@@ -186,20 +123,9 @@
 				reg = <0x51>;
 			};
 		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 				/* IDSEL 0x10 */
@@ -208,20 +134,12 @@
 				0x8000 0 0 3 &mpc5200_pic 0 2 3
 				0x8000 0 0 4 &mpc5200_pic 0 1 3
 				>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
 		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
 			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = <0 0 0xff800000 0x00800000
 			  1 0 0x80000000 0x00800000
 			  3 0 0x80000000 0x00800000>;
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 2bbecbb4cbf..69422eb24d9 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -291,13 +291,13 @@
 			ranges = <0x0 0xc100 0x200>;
 			cell-index = <1>;
 			dma00: dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
+				compatible = "fsl,ssi-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <76 2>;
 			};
 			dma01: dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
+				compatible = "fsl,ssi-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <77 2>;
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 8a4ec30b21a..9e354997eb7 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -12,246 +12,92 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "phytec,pcm030";
 	compatible = "phytec,pcm030";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
-		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
+		timer@600 {		// General Purpose Timer
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
 		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
-		};
-
-		ac97@2000 { /* PSC1 in ac97 mode */
+		psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
 		/* PSC2 port is used by CAN1/2 */
+		psc@2200 {
+			status = "disabled";
+		};
 
-		serial@2400 { /* PSC3 in UART mode */
+		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <2>;
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
 		};
 
 		/* PSC4 is ??? */
+		psc@2600 {
+			status = "disabled";
+		};
 
 		/* PSC5 is ??? */
+		psc@2800 {
+			status = "disabled";
+		};
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <5>;
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
 		};
 
 		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
 			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
@@ -259,6 +105,7 @@
 			eeprom@52 {
 				compatible = "catalyst,24c32";
 				reg = <0x52>;
+				pagesize = <32>;
 			};
 		};
 
@@ -269,12 +116,6 @@
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 				 0xc000 0 0 2 &mpc5200_pic 1 1 3
@@ -285,11 +126,12 @@
 				 0xc800 0 0 2 &mpc5200_pic 1 2 3
 				 0xc800 0 0 3 &mpc5200_pic 1 3 3
 				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
 		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		status = "disabled";
+	};
 };
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 85d857a5d46..1dd478bfff9 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -12,99 +12,37 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "phytec,pcm032";
 	compatible = "phytec,pcm032";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
 
 	memory {
-		device_type = "memory";
 		reg = <0x00000000 0x08000000>;	// 128MB
 	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
-		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
+		timer@600 {		// General Purpose Timer
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
 		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
@@ -118,163 +56,62 @@
 		};
 
 		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
-		};
-
-		ac97@2000 {	/* PSC1 is ac97 */
+		psc@2000 {	/* PSC1 is ac97 */
 			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 			cell-index = <0>;
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
 		/* PSC2 port is used by CAN1/2 */
+		psc@2200 {
+			status = "disabled";
+		};
 
-		serial@2400 { /* PSC3 in UART mode */
+		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <2>;
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
 		};
 
 		/* PSC4 is ??? */
+		psc@2600 {
+			status = "disabled";
+		};
 
 		/* PSC5 is ??? */
+		psc@2800 {
+			status = "disabled";
+		};
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <5>;
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
 		};
 
 		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
 			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
 			};
 			eeprom@52 {
-				compatible = "at24,24c32";
+				compatible = "catalyst,24c32";
 				reg = <0x52>;
+				pagesize = <32>;
 			};
 		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 				 0xc000 0 0 2 &mpc5200_pic 1 1 3
@@ -285,20 +122,12 @@
 				 0xc800 0 0 2 &mpc5200_pic 1 2 3
 				 0xc800 0 0 3 &mpc5200_pic 1 3 3
 				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
 		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = <0 0 0xfe000000 0x02000000
 			  1 0 0xfc000000 0x02000000
 			  2 0 0xfbe00000 0x00200000
@@ -351,40 +180,39 @@
 			bank-width = <2>;
 		};
 
-                /*
+		/*
 		 * example snippets for FPGA
 		 *
 		 * fpga@3,0 {
-		 *         compatible = "fpga_driver";
-		 *         reg = <3 0 0x02000000>;
-		 *         bank-width = <4>;
+		 *	 compatible = "fpga_driver";
+		 *	 reg = <3 0 0x02000000>;
+		 *	 bank-width = <4>;
 		 * };
 		 *
 		 * fpga@4,0 {
-		 *         compatible = "fpga_driver";
-		 *         reg = <4 0 0x02000000>;
-		 *         bank-width = <4>;
+		 *	 compatible = "fpga_driver";
+		 *	 reg = <4 0 0x02000000>;
+		 *	 bank-width = <4>;
 		 * };
-                 */
+		 */
 
-                /*
+		/*
 		 * example snippets for free chipselects
-                 *
+		 *
 		 * device@5,0 {
-		 *         compatible = "custom_driver";
-		 *         reg = <5 0 0x02000000>;
+		 *	 compatible = "custom_driver";
+		 *	 reg = <5 0 0x02000000>;
 		 * };
-                 *
+		 *
 		 * device@6,0 {
-		 *         compatible = "custom_driver";
-		 *         reg = <6 0 0x02000000>;
+		 *	 compatible = "custom_driver";
+		 *	 reg = <6 0 0x02000000>;
 		 * };
-                 *
+		 *
 		 * device@7,0 {
-		 *         compatible = "custom_driver";
-		 *         reg = <7 0 0x02000000>;
+		 *	 compatible = "custom_driver";
+		 *	 reg = <7 0 0x02000000>;
 		 * };
-                 */
+		 */
 	};
 };
-
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
index 019264c6290..ba83d5488ec 100644
--- a/arch/powerpc/boot/dts/uc101.dts
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -11,79 +11,24 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "manroland,uc101";
 	compatible = "manroland,uc101";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		gpt0: timer@600 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
@@ -97,118 +42,85 @@
 		};
 
 		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		rtc@800 {
+			status = "disabled";
 		};
 
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		can@900 {
+			status = "disabled";
+		};
+
+		can@980 {
+			status = "disabled";
 		};
 
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		spi@f00 {
+			status = "disabled";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		usb@1000 {
+			status = "disabled";
 		};
 
-		serial@2000 { /* PSC1 in UART mode */
+		psc@2000 {	// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
-		serial@2200 { /* PSC2 in UART mode */
+		psc@2200 {	// PSC2
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
 		};
 
-		serial@2c00 {		/* PSC6 in UART mode */
+		psc@2400 {	// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {	// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {	// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {	// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
 		};
 
 		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
 			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				compatible = "intel,lxt971";
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
+		i2c@3d00 {
+			status = "disabled";
 		};
 
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
 			fsl,preserve-clocking;
 			clock-frequency = <400000>;
 
@@ -221,19 +133,13 @@
 				reg = <0x51>;
 			};
 		};
+	};
 
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
+	pci@f0000d00 {
+		status = "disabled";
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = <0 0 0xff800000 0x00800000
 			  1 0 0x80000000 0x00800000
 			  3 0 0x80000000 0x00800000>;