Manual merge with Linus.

Conflicts:
	arch/powerpc/kernel/setup-common.c
	drivers/input/keyboard/hil_kbd.c
	drivers/input/mouse/hil_ptr.c

1 files changed, 471 insertions, 0 deletions

diff --git a/arch/powerpc/kernel/l2cr_6xx.S b/arch/powerpc/kernel/l2cr_6xx.S
new file mode 100644
index 00000000000..d7f4e982b53
--- /dev/null
+++ b/arch/powerpc/kernel/l2cr_6xx.S
@@ -0,0 +1,471 @@
+/*
+	L2CR functions
+	Copyright © 1997-1998 by PowerLogix R & D, Inc.
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+/*
+	Thur, Dec. 12, 1998.
+	- First public release, contributed by PowerLogix.
+	***********
+	Sat, Aug. 7, 1999.
+	- Terry: Made sure code disabled interrupts before running. (Previously
+			it was assumed interrupts were already disabled).
+	- Terry: Updated for tentative G4 support.  4MB of memory is now flushed
+			instead of 2MB.  (Prob. only 3 is necessary).
+	- Terry: Updated for workaround to HID0[DPM] processor bug
+			during global invalidates.
+	***********
+	Thu, July 13, 2000.
+	- Terry: Added isync to correct for an errata.
+
+	22 August 2001.
+	- DanM: Finally added the 7450 patch I've had for the past
+		several months.  The L2CR is similar, but I'm going
+		to assume the user of this functions knows what they
+		are doing.
+
+	Author:	Terry Greeniaus (tgree@phys.ualberta.ca)
+	Please e-mail updates to this file to me, thanks!
+*/
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+
+/* Usage:
+
+	When setting the L2CR register, you must do a few special
+	things.  If you are enabling the cache, you must perform a
+	global invalidate.  If you are disabling the cache, you must
+	flush the cache contents first.  This routine takes care of
+	doing these things.  When first enabling the cache, make sure
+	you pass in the L2CR you want, as well as passing in the
+	global invalidate bit set.  A global invalidate will only be
+	performed if the L2I bit is set in applyThis.  When enabling
+	the cache, you should also set the L2E bit in applyThis.  If
+	you want to modify the L2CR contents after the cache has been
+	enabled, the recommended procedure is to first call
+	__setL2CR(0) to disable the cache and then call it again with
+	the new values for L2CR.  Examples:
+
+	_setL2CR(0)		- disables the cache
+	_setL2CR(0xB3A04000)	- enables my G3 upgrade card:
+				- L2E set to turn on the cache
+				- L2SIZ set to 1MB
+				- L2CLK set to 1:1
+				- L2RAM set to pipelined synchronous late-write
+				- L2I set to perform a global invalidation
+				- L2OH set to 0.5 nS
+				- L2DF set because this upgrade card
+				  requires it
+
+	A similar call should work for your card.  You need to know
+	the correct setting for your card and then place them in the
+	fields I have outlined above.  Other fields support optional
+	features, such as L2DO which caches only data, or L2TS which
+	causes cache pushes from the L1 cache to go to the L2 cache
+	instead of to main memory.
+
+IMPORTANT:
+	Starting with the 7450, the bits in this register have moved
+	or behave differently.  The Enable, Parity Enable, Size,
+	and L2 Invalidate are the only bits that have not moved.
+	The size is read-only for these processors with internal L2
+	cache, and the invalidate is a control as well as status.
+		-- Dan
+
+*/
+/*
+ * Summary: this procedure ignores the L2I bit in the value passed in,
+ * flushes the cache if it was already enabled, always invalidates the
+ * cache, then enables the cache if the L2E bit is set in the value
+ * passed in.
+ *   -- paulus.
+ */
+_GLOBAL(_set_L2CR)
+	/* Make sure this is a 750 or 7400 chip */
+BEGIN_FTR_SECTION
+	li	r3,-1
+	blr
+END_FTR_SECTION_IFCLR(CPU_FTR_L2CR)
+
+	mflr	r9
+
+	/* Stop DST streams */
+BEGIN_FTR_SECTION
+	DSSALL
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+
+	/* Turn off interrupts and data relocation. */
+	mfmsr	r7		/* Save MSR in r7 */
+	rlwinm	r4,r7,0,17,15
+	rlwinm	r4,r4,0,28,26	/* Turn off DR bit */
+	sync
+	mtmsr	r4
+	isync
+
+	/* Before we perform the global invalidation, we must disable dynamic
+	 * power management via HID0[DPM] to work around a processor bug where
+	 * DPM can possibly interfere with the state machine in the processor
+	 * that invalidates the L2 cache tags.
+	 */
+	mfspr	r8,SPRN_HID0		/* Save HID0 in r8 */
+	rlwinm	r4,r8,0,12,10		/* Turn off HID0[DPM] */
+	sync
+	mtspr	SPRN_HID0,r4		/* Disable DPM */
+	sync
+
+	/* Get the current enable bit of the L2CR into r4 */
+	mfspr	r4,SPRN_L2CR
+
+	/* Tweak some bits */
+	rlwinm	r5,r3,0,0,0		/* r5 contains the new enable bit */
+	rlwinm	r3,r3,0,11,9		/* Turn off the invalidate bit */
+	rlwinm	r3,r3,0,1,31		/* Turn off the enable bit */
+
+	/* Check to see if we need to flush */
+	rlwinm.	r4,r4,0,0,0
+	beq	2f
+
+	/* Flush the cache. First, read the first 4MB of memory (physical) to
+	 * put new data in the cache.  (Actually we only need
+	 * the size of the L2 cache plus the size of the L1 cache, but 4MB will
+	 * cover everything just to be safe).
+	 */
+
+	 /**** Might be a good idea to set L2DO here - to prevent instructions
+	       from getting into the cache.  But since we invalidate
+	       the next time we enable the cache it doesn't really matter.
+	       Don't do this unless you accomodate all processor variations.
+	       The bit moved on the 7450.....
+	  ****/
+
+BEGIN_FTR_SECTION
+	/* Disable L2 prefetch on some 745x and try to ensure
+	 * L2 prefetch engines are idle. As explained by errata
+	 * text, we can't be sure they are, we just hope very hard
+	 * that well be enough (sic !). At least I noticed Apple
+	 * doesn't even bother doing the dcbf's here...
+	 */
+	mfspr	r4,SPRN_MSSCR0
+	rlwinm	r4,r4,0,0,29
+	sync
+	mtspr	SPRN_MSSCR0,r4
+	sync
+	isync
+	lis	r4,KERNELBASE@h
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+
+	/* TODO: use HW flush assist when available */
+
+	lis	r4,0x0002
+	mtctr	r4
+	li	r4,0
+1:
+	lwzx	r0,r0,r4
+	addi	r4,r4,32		/* Go to start of next cache line */
+	bdnz	1b
+	isync
+
+	/* Now, flush the first 4MB of memory */
+	lis	r4,0x0002
+	mtctr	r4
+	li	r4,0
+	sync
+1:
+	dcbf	0,r4
+	addi	r4,r4,32		/* Go to start of next cache line */
+	bdnz	1b
+
+2:
+	/* Set up the L2CR configuration bits (and switch L2 off) */
+	/* CPU errata: Make sure the mtspr below is already in the
+	 * L1 icache
+	 */
+	b	20f
+	.balign	L1_CACHE_BYTES
+22:
+	sync
+	mtspr	SPRN_L2CR,r3
+	sync
+	b	23f
+20:
+	b	21f
+21:	sync
+	isync
+	b	22b
+
+23:
+	/* Perform a global invalidation */
+	oris	r3,r3,0x0020
+	sync
+	mtspr	SPRN_L2CR,r3
+	sync
+	isync				/* For errata */
+
+BEGIN_FTR_SECTION
+	/* On the 7450, we wait for the L2I bit to clear......
+	*/
+10:	mfspr	r3,SPRN_L2CR
+	andis.	r4,r3,0x0020
+	bne	10b
+	b	11f
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+
+	/* Wait for the invalidation to complete */
+3:	mfspr	r3,SPRN_L2CR
+	rlwinm.	r4,r3,0,31,31
+	bne	3b
+
+11:	rlwinm	r3,r3,0,11,9		/* Turn off the L2I bit */
+	sync
+	mtspr	SPRN_L2CR,r3
+	sync
+
+	/* See if we need to enable the cache */
+	cmplwi	r5,0
+	beq	4f
+
+	/* Enable the cache */
+	oris	r3,r3,0x8000
+	mtspr	SPRN_L2CR,r3
+	sync
+	
+	/* Enable L2 HW prefetch on 744x/745x */
+BEGIN_FTR_SECTION
+	mfspr	r3,SPRN_MSSCR0
+	ori	r3,r3,3
+	sync
+	mtspr	SPRN_MSSCR0,r3
+	sync
+	isync
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+4:
+
+	/* Restore HID0[DPM] to whatever it was before */
+	sync
+	mtspr	1008,r8
+	sync
+
+	/* Restore MSR (restores EE and DR bits to original state) */
+	SYNC
+	mtmsr	r7
+	isync
+
+	mtlr	r9
+	blr
+
+_GLOBAL(_get_L2CR)
+	/* Return the L2CR contents */
+	li	r3,0
+BEGIN_FTR_SECTION
+	mfspr	r3,SPRN_L2CR
+END_FTR_SECTION_IFSET(CPU_FTR_L2CR)
+	blr
+
+
+/*
+ * Here is a similar routine for dealing with the L3 cache
+ * on the 745x family of chips
+ */
+
+_GLOBAL(_set_L3CR)
+	/* Make sure this is a 745x chip */
+BEGIN_FTR_SECTION
+	li	r3,-1
+	blr
+END_FTR_SECTION_IFCLR(CPU_FTR_L3CR)
+
+	/* Turn off interrupts and data relocation. */
+	mfmsr	r7		/* Save MSR in r7 */
+	rlwinm	r4,r7,0,17,15
+	rlwinm	r4,r4,0,28,26	/* Turn off DR bit */
+	sync
+	mtmsr	r4
+	isync
+
+	/* Stop DST streams */
+	DSSALL
+	sync
+
+	/* Get the current enable bit of the L3CR into r4 */
+	mfspr	r4,SPRN_L3CR
+
+	/* Tweak some bits */
+	rlwinm	r5,r3,0,0,0		/* r5 contains the new enable bit */
+	rlwinm	r3,r3,0,22,20		/* Turn off the invalidate bit */
+	rlwinm	r3,r3,0,2,31		/* Turn off the enable & PE bits */
+	rlwinm	r3,r3,0,5,3		/* Turn off the clken bit */
+	/* Check to see if we need to flush */
+	rlwinm.	r4,r4,0,0,0
+	beq	2f
+
+	/* Flush the cache.
+	 */
+
+	/* TODO: use HW flush assist */
+
+	lis	r4,0x0008
+	mtctr	r4
+	li	r4,0
+1:
+	lwzx	r0,r0,r4
+	dcbf	0,r4
+	addi	r4,r4,32		/* Go to start of next cache line */
+	bdnz	1b
+
+2:
+	/* Set up the L3CR configuration bits (and switch L3 off) */
+	sync
+	mtspr	SPRN_L3CR,r3
+	sync
+
+	oris	r3,r3,L3CR_L3RES@h		/* Set reserved bit 5 */
+	mtspr	SPRN_L3CR,r3
+	sync
+	oris	r3,r3,L3CR_L3CLKEN@h		/* Set clken */
+	mtspr	SPRN_L3CR,r3
+	sync
+
+	/* Wait for stabilize */
+	li	r0,256
+	mtctr	r0
+1:	bdnz	1b
+
+	/* Perform a global invalidation */
+	ori	r3,r3,0x0400
+	sync
+	mtspr	SPRN_L3CR,r3
+	sync
+	isync
+
+	/* We wait for the L3I bit to clear...... */
+10:	mfspr	r3,SPRN_L3CR
+	andi.	r4,r3,0x0400
+	bne	10b
+
+	/* Clear CLKEN */
+	rlwinm	r3,r3,0,5,3		/* Turn off the clken bit */
+	mtspr	SPRN_L3CR,r3
+	sync
+
+	/* Wait for stabilize */
+	li	r0,256
+	mtctr	r0
+1:	bdnz	1b
+
+	/* See if we need to enable the cache */
+	cmplwi	r5,0
+	beq	4f
+
+	/* Enable the cache */
+	oris	r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h
+	mtspr	SPRN_L3CR,r3
+	sync
+
+	/* Wait for stabilize */
+	li	r0,256
+	mtctr	r0
+1:	bdnz	1b
+
+	/* Restore MSR (restores EE and DR bits to original state) */
+4:	SYNC
+	mtmsr	r7
+	isync
+	blr
+
+_GLOBAL(_get_L3CR)
+	/* Return the L3CR contents */
+	li	r3,0
+BEGIN_FTR_SECTION
+	mfspr	r3,SPRN_L3CR
+END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
+	blr
+
+/* --- End of PowerLogix code ---
+ */
+
+
+/* flush_disable_L1()	- Flush and disable L1 cache
+ *
+ * clobbers r0, r3, ctr, cr0
+ * Must be called with interrupts disabled and MMU enabled.
+ */
+_GLOBAL(__flush_disable_L1)
+	/* Stop pending alitvec streams and memory accesses */
+BEGIN_FTR_SECTION
+	DSSALL
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ 	sync
+
+	/* Load counter to 0x4000 cache lines (512k) and
+	 * load cache with datas
+	 */
+	li	r3,0x4000	/* 512kB / 32B */
+	mtctr	r3
+	lis	r3,KERNELBASE@h
+1:
+	lwz	r0,0(r3)
+	addi	r3,r3,0x0020	/* Go to start of next cache line */
+	bdnz	1b
+	isync
+	sync
+
+	/* Now flush those cache lines */
+	li	r3,0x4000	/* 512kB / 32B */
+	mtctr	r3
+	lis	r3,KERNELBASE@h
+1:
+	dcbf	0,r3
+	addi	r3,r3,0x0020	/* Go to start of next cache line */
+	bdnz	1b
+	sync
+
+	/* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */
+	mfspr	r3,SPRN_HID0
+	rlwinm	r3,r3,0,18,15
+	mtspr	SPRN_HID0,r3
+	sync
+	isync
+ 	blr
+
+/* inval_enable_L1	- Invalidate and enable L1 cache
+ *
+ * Assumes L1 is already disabled and MSR:EE is off
+ *
+ * clobbers r3
+ */
+_GLOBAL(__inval_enable_L1)
+	/* Enable and then Flash inval the instruction & data cache */
+	mfspr	r3,SPRN_HID0
+	ori	r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI
+	sync
+	isync
+	mtspr	SPRN_HID0,r3
+	xori	r3,r3, HID0_ICFI|HID0_DCI
+	mtspr	SPRN_HID0,r3
+	sync
+
+ 	blr
+
+